Rectangular Analog-to-Digital Converters 2,400+

Reset All
Part RoHS Manufacturer Converter Type Temperature Grade Terminal Form No. of Terminals Package Code Package Shape Total Dose (V) Package Body Material No. of Analog In Channels Surface Mount Maximum Supply Voltage Maximum Analog Input Voltage Sample Rate No. of Functions Technology Screening Level Nominal Bandwidth No. of Bits Maximum Supply Current Maximum Linearity Error (EL) Nominal Supply Voltage Output Bit Code Power Supplies (V) Nominal Negative Supply Voltage Package Style (Meter) Package Equivalence Code Sub-Category Minimum Supply Voltage Terminal Pitch Maximum Operating Temperature Minimum Analog Input Voltage Output Format Minimum Operating Temperature Terminal Finish Sample and Hold/Track and Hold Terminal Position Maximum Conversion Time JESD-30 Code Moisture Sensitivity Level (MSL) Maximum Seated Height Width Qualification Additional Features JESD-609 Code Maximum Time At Peak Reflow Temperature (s) Peak Reflow Temperature (C) Length Input Bit Code

LTC2485IDD#TRPBF

Analog Devices

Analog To Digital Converter, Delta-Sigma

Industrial

No Lead

10

HVSSON

Rectangular

Plastic/Epoxy

1

Yes

7.5 Hz

1

Bipolar

24

5 V

Binary, 2's Complement Binary

Small Outline, Heat Sink/Slug, Very Thin Profile, Shrink Pitch

0.02 in (0.5 mm)

85 °C (185 °F)

Serial

-40 °C (-40 °F)

Matte Tin

Dual

163.5 ms

R-PDSO-N10

1

0.031 in (0.8 mm)

0.118 in (3 mm)

No

e3

30 s

260 °C (500 °F)

0.118 in (3 mm)

LTC2499CUHF#PBF

Analog Devices

Analog To Digital Converter, Delta-Sigma

Commercial

No Lead

38

HVQCCN

Rectangular

Plastic/Epoxy

16

Yes

5.5 V

1

24

5 V

2's Complement Binary

Chip Carrier, Heat Sink/Slug, Very Thin Profile

0.02 in (0.5 mm)

70 °C (158 °F)

0 mV

Serial

0 °C (32 °F)

Matte Tin

Quad

163.5 ms

R-PQCC-N38

1

0.031 in (0.8 mm)

0.197 in (5 mm)

No

e3

30 s

260 °C (500 °F)

0.276 in (7 mm)

ADS7805UB

Texas Instruments

Analog To Digital Converter, Successive Approximation

Other

Gull Wing

28

SOP

Rectangular

Plastic/Epoxy

1

Yes

10 V

100 kHz

1

CMOS

16

0.0046 %

5 V

2's Complement Binary

5 V

Small Outline

SOP28,.4

Analog to Digital Converters

4.75 V

0.05 in (1.27 mm)

85 °C (185 °F)

-10 V

Parallel, Word

-25 °C (-13 °F)

Nickel Palladium Gold

Sample

Dual

8 µs

R-PDSO-G28

3

0.104 in (2.65 mm)

0.295 in (7.5 mm)

No

e4

30 s

260 °C (500 °F)

0.705 in (17.9 mm)

ADS7951SDBTR

Texas Instruments

Analog To Digital Converter, Successive Approximation

Automotive

Gull Wing

30

TSSOP

Rectangular

Plastic/Epoxy

8

Yes

5.25 V

1 MHz

1

CMOS

12

3 mA

0.0366 %

3.3 V

Binary

1.8/5,3/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP30,.25,20

Analog to Digital Converters

1.7 V

0.02 in (0.5 mm)

125 °C (257 °F)

0 mV

Serial

-40 °C (-40 °F)

Nickel Palladium Gold

Sample

Dual

800 ns

R-PDSO-G30

2

0.047 in (1.2 mm)

0.173 in (4.4 mm)

No

e4

30 s

260 °C (500 °F)

0.307 in (7.8 mm)

ADS8684AIDBTR

Texas Instruments

Analog To Digital Converter, Successive Approximation

Automotive

Gull Wing

38

TSSOP

Rectangular

Plastic/Epoxy

4

Yes

10.24 V

500 kHz

1

16

16 mA

0.0031 %

5 V

Binary

3,5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP38,.25,20

Other Converters

1.65 V

0.02 in (0.5 mm)

125 °C (257 °F)

-10.24 V

Serial

-40 °C (-40 °F)

Nickel Palladium Gold

Sample

Dual

850 ns

R-PDSO-G38

2

0.047 in (1.2 mm)

0.173 in (4.4 mm)

No

e4

30 s

260 °C (500 °F)

0.382 in (9.7 mm)

LTC1865CS8#PBF

Analog Devices

Analog To Digital Converter, Successive Approximation

Commercial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

2

Yes

5.25 V

250 kHz

1

16

0.0122 %

5 V

Binary

Small Outline

0.05 in (1.27 mm)

70 °C (158 °F)

0 mV

Serial

0 °C (32 °F)

Matte Tin

Sample

Dual

3.2 µs

R-PDSO-G8

1

0.069 in (1.752 mm)

0.154 in (3.9 mm)

No

e3

30 s

260 °C (500 °F)

0.193 in (4.903 mm)

LTC2493CDE#PBF

Analog Devices

Analog To Digital Converter, Delta-Sigma

Commercial

No Lead

14

HVSON

Rectangular

Plastic/Epoxy

4

Yes

2.75 V

1

CMOS

24

0.001 %

5 V

Binary, 2's Complement Binary

Small Outline, Heat Sink/Slug, Very Thin Profile

0.02 in (0.5 mm)

70 °C (158 °F)

50 mV

Serial

0 °C (32 °F)

Matte Tin

Dual

163.5 ms

R-PDSO-N14

1

0.031 in (0.8 mm)

0.118 in (3 mm)

No

e3

30 s

260 °C (500 °F)

0.157 in (4 mm)

TLC1543CDWRG4

Texas Instruments

Analog To Digital Converter, Successive Approximation

Commercial

Gull Wing

20

SOP

Rectangular

Plastic/Epoxy

11

Yes

5.5 V

38 kHz

1

CMOS

10

2.5 mA

0.0977 %

5 V

Binary

5 V

Small Outline

SOP20,.4

Analog to Digital Converters

4.5 V

0.05 in (1.27 mm)

70 °C (158 °F)

0 mV

Serial

0 °C (32 °F)

Nickel Palladium Gold

Sample

Dual

21 µs

R-PDSO-G20

1

0.104 in (2.65 mm)

0.295 in (7.5 mm)

No

e4

30 s

260 °C (500 °F)

0.504 in (12.8 mm)

AD7466BRTZ-R2

Analog Devices

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

6

LSSOP

Rectangular

Plastic/Epoxy

1

Yes

1.8 V

100 kHz

1

CMOS

12

0.0366 %

1.8 V

Binary

1.8/3.3 V

Small Outline, Low Profile, Shrink Pitch

TSOP6,.11,37

Analog to Digital Converters

0.037 in (0.95 mm)

85 °C (185 °F)

0 mV

Serial

-40 °C (-40 °F)

Nickel Palladium Gold

Track

Dual

4.7 µs

R-PDSO-G6

1

0.057 in (1.45 mm)

0.063 in (1.6 mm)

No

e4

260 °C (500 °F)

0.114 in (2.9 mm)

ADS7816UC

Texas Instruments

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

1

Yes

5.25 V

200 kHz

1

CMOS

12

0.0244 %

5 V

Binary

5 V

Small Outline

SOP8,.25

Analog to Digital Converters

4.5 V

0.05 in (1.27 mm)

85 °C (185 °F)

0 mV

Serial

-40 °C (-40 °F)

Nickel Palladium Gold

Sample

Dual

3.75 µs

R-PDSO-G8

2

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e4

30 s

260 °C (500 °F)

0.193 in (4.9 mm)

LTC2487IDE#PBF

Analog Devices

Analog To Digital Converter, Delta-Sigma

Industrial

No Lead

14

HVSON

Rectangular

Plastic/Epoxy

4

Yes

5.5 V

1

16

0.002 %

5 V

2's Complement Binary

Small Outline, Heat Sink/Slug, Very Thin Profile

0.02 in (0.5 mm)

85 °C (185 °F)

0 mV

Parallel, Word

-40 °C (-40 °F)

Matte Tin

Dual

163.5 ms

R-PDSO-N14

1

0.031 in (0.8 mm)

0.118 in (3 mm)

No

e3

30 s

260 °C (500 °F)

0.157 in (4 mm)

MCP3208T-CI/SLVAO

Microchip Technology

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

16

SOP

Rectangular

Plastic/Epoxy

8

Yes

5 V

100 kHz

1

CMOS

TS 16949

12

0.0488 %

5 V

Binary

Small Outline

SOP16,.25

0.05 in (1.27 mm)

85 °C (185 °F)

0 mV

Serial

-40 °C (-40 °F)

Sample

Dual

6 µs

R-PDSO-G16

0.069 in (1.75 mm)

0.154 in (3.9 mm)

0.39 in (9.9 mm)

MCP3421A2T-E/CH

Microchip Technology

Analog To Digital Converter, Delta-Sigma

Industrial

Gull Wing

6

LSSOP

Rectangular

Plastic/Epoxy

1

Yes

2.048 V

240 Hz

1

TS 16949

18

0.0035 %

5 V

2's Complement Binary

5 V

Small Outline, Low Profile, Shrink Pitch

TSOP6,.11,37

Analog to Digital Converters

0.037 in (0.95 mm)

125 °C (257 °F)

-2.048 V

Serial

-40 °C (-40 °F)

Matte Tin

Dual

R-PDSO-G6

1

0.057 in (1.45 mm)

0.061 in (1.55 mm)

No

e3

40 s

260 °C (500 °F)

0.114 in (2.9 mm)

PCM4202DBRG4

Texas Instruments

Analog To Digital Converter, Delta-Sigma

Commercial

Gull Wing

28

SSOP

Rectangular

Plastic/Epoxy

2

Yes

6 V

216 kHz

1

24

65 mA

5 V

2's Complement Binary

3.3,5 V

Small Outline, Shrink Pitch

SSOP28,.3

Analog to Digital Converters

0.026 in (0.65 mm)

70 °C (158 °F)

0 mV

Serial

-10 °C (14 °F)

Nickel Palladium Gold

Dual

R-PDSO-G28

2

0.079 in (2 mm)

0.209 in (5.3 mm)

No

e4

30 s

260 °C (500 °F)

0.402 in (10.2 mm)

AD1674JRZ

Analog Devices

Analog To Digital Converter, Successive Approximation

Commercial

Gull Wing

28

SOP

Rectangular

Plastic/Epoxy

1

Yes

10 V

111 kHz

1

BICMOS

12

18 mA

0.0244 %

15 V

Binary

5,±12/±15 V

-15 V

Small Outline

SOP28,.4

Analog to Digital Converters

0.05 in (1.27 mm)

70 °C (158 °F)

-10 V

Parallel, Word

0 °C (32 °F)

Matte Tin

Sample

Dual

10 µs

R-PDSO-G28

3

0.104 in (2.65 mm)

0.295 in (7.5 mm)

No

e3

40 s

260 °C (500 °F)

0.705 in (17.9 mm)

AD7324BRUZ-REEL7

Analog Devices

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

16

TSSOP

Rectangular

Plastic/Epoxy

4

Yes

10 V

1 MHz

1

CMOS

12

0.0269 %

5 V

Binary, 2's Complement Binary

3/5,±12/±16.5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP16,.25

Analog to Digital Converters

0.026 in (0.65 mm)

85 °C (185 °F)

-10 V

Serial

-40 °C (-40 °F)

Matte Tin

Track

Dual

800 ns

R-PDSO-G16

1

0.047 in (1.2 mm)

0.173 in (4.4 mm)

No

e3

30 s

260 °C (500 °F)

0.197 in (5 mm)

ADC128S102WGRQV

Texas Instruments

Analog To Digital Converter, Successive Approximation

Military

Gull Wing

16

SOP

Rectangular

100k Rad(Si)

Ceramic, Metal-Sealed Cofired

8

Yes

5.25 V

1 MHz

1

CMOS

MIL-STD-883

12

3.1 mA

0.0269 %

3 V

Binary

3/5 V

Small Outline

SOP16,.4

Analog to Digital Converters

2.7 V

0.05 in (1.27 mm)

125 °C (257 °F)

0 mV

Serial

-55 °C (-67 °F)

Tin Lead

Track

Dual

812.5 ns

R-CDSO-G16

1

0.092 in (2.33 mm)

0.25 in (6.35 mm)

No

e0

0.39 in (9.906 mm)

ADS1271IBPWR

Texas Instruments

Analog To Digital Converter, Delta-Sigma

Industrial

Gull Wing

16

TSSOP

Rectangular

Plastic/Epoxy

1

Yes

5.25 V

105 kHz

1

24

10 mA

0.0015 %

5 V

2's Complement Binary

1.8/3.3,5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP16,.25

Analog to Digital Converters

1.65 V

0.026 in (0.65 mm)

105 °C (221 °F)

-2.5 V

Serial

-40 °C (-40 °F)

Nickel Palladium Gold

Dual

18.9629 µs

R-PDSO-G16

2

0.047 in (1.2 mm)

0.173 in (4.4 mm)

No

e4

30 s

260 °C (500 °F)

0.197 in (5 mm)

LTC2498IUHF#PBF

Analog Devices

Analog To Digital Converter, Delta-Sigma

Industrial

No Lead

38

HVQCCN

Rectangular

Plastic/Epoxy

16

Yes

5.5 V

1

CMOS

24

0 %

5 V

Binary

Chip Carrier, Heat Sink/Slug, Very Thin Profile

0.02 in (0.5 mm)

85 °C (185 °F)

0 mV

Serial

-40 °C (-40 °F)

Matte Tin

Quad

81.9 ms

R-PQCC-N38

1

0.031 in (0.8 mm)

0.197 in (5 mm)

No

e3

30 s

260 °C (500 °F)

0.276 in (7 mm)

MAX1302AEUG

Maxim Integrated

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

24

TSSOP

Rectangular

Plastic/Epoxy

8

Yes

4.096 V

114 kHz

1

BICMOS

16

0.0031 %

5 V

Offset Binary

5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP24,.25

Analog to Digital Converters

0.026 in (0.65 mm)

85 °C (185 °F)

-4.096 V

Serial

-40 °C (-40 °F)

Tin Lead

Track

Dual

R-PDSO-G24

1

0.043 in (1.1 mm)

0.173 in (4.4 mm)

No

e0

0.307 in (7.8 mm)

ADS7805UBG4

Texas Instruments

Analog To Digital Converter, Successive Approximation

Other

Gull Wing

28

SOP

Rectangular

Plastic/Epoxy

1

Yes

10 V

100 kHz

1

CMOS

16

0.0046 %

5 V

2's Complement Binary

Small Outline

4.75 V

0.05 in (1.27 mm)

85 °C (185 °F)

-10 V

Parallel, Word

-25 °C (-13 °F)

Nickel Palladium Gold

Sample

Dual

8 µs

R-PDSO-G28

3

0.104 in (2.65 mm)

0.295 in (7.5 mm)

No

e4

30 s

260 °C (500 °F)

0.705 in (17.9 mm)

LTC2420IS8#TRPBF

Analog Devices

Analog To Digital Converter, Delta-Sigma

Industrial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

1

Yes

6.1875 V

1

20

0.1375 %

3.3 V

Binary

Small Outline

0.05 in (1.27 mm)

85 °C (185 °F)

-12.5 mV

Serial

-40 °C (-40 °F)

Matte Tin

Dual

163.44 ms

R-PDSO-G8

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e3

30 s

260 °C (500 °F)

0.193 in (4.9 mm)

MCP3550-50E/SN

Microchip Technology

Analog To Digital Converter, Delta-Sigma

Automotive

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

1

Yes

2.5 V

25.6 kHz

1

TS 16949

22

170 μA

0.0006 %

5 V

2's Complement Binary

2.7/5 V

Small Outline

SOP8,.23

Analog to Digital Converters

0.05 in (1.27 mm)

125 °C (257 °F)

-2.5 V

Serial

-40 °C (-40 °F)

Matte Tin

Dual

80.8 ms

R-PDSO-G8

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e3

30 s

260 °C (500 °F)

0.193 in (4.9 mm)

ADS1119IPWT

Texas Instruments

Analog To Digital Converter, Delta-Sigma

Automotive

Gull Wing

16

TSSOP

Rectangular

Plastic/Epoxy

4

Yes

5.5 V

1 kHz

1

16

0.0015 %

3.3 V

2's Complement Binary

Small Outline, Thin Profile, Shrink Pitch

2.3 V

0.026 in (0.65 mm)

125 °C (257 °F)

-750 mV

Serial

-40 °C (-40 °F)

Nickel Palladium Gold

Dual

R-PDSO-G16

3

0.047 in (1.2 mm)

0.173 in (4.4 mm)

e4

30 s

260 °C (500 °F)

0.197 in (5 mm)

LTC2452IDDB#TRMPBF

Analog Devices

Analog To Digital Converter, Delta-Sigma

Industrial

No Lead

8

HVSON

Rectangular

Plastic/Epoxy

1

Yes

5.5 V

60 Hz

1

CMOS

16

0.0153 %

3 V

Binary

Small Outline, Heat Sink/Slug, Very Thin Profile

0.02 in (0.5 mm)

85 °C (185 °F)

-5.5 V

Serial

-40 °C (-40 °F)

Matte Tin

Dual

23 ms

R-PDSO-N8

1

0.031 in (0.8 mm)

0.079 in (2 mm)

No

e3

30 s

260 °C (500 °F)

0.118 in (3 mm)

MCP3428T-E/ST

Microchip Technology

Analog To Digital Converter, Delta-Sigma

Automotive

Gull Wing

14

TSSOP

Rectangular

Plastic/Epoxy

4

Yes

2.048 V

24 kHz

1

TS 16949

16

180 μA

5 V

2's Complement Binary

Small Outline, Thin Profile, Shrink Pitch

TSSOP14,.25

0.026 in (0.65 mm)

125 °C (257 °F)

-2.048 V

Serial

-40 °C (-40 °F)

Matte Tin

Dual

R-PDSO-G14

1

0.047 in (1.2 mm)

0.173 in (4.4 mm)

No

e3

40 s

260 °C (500 °F)

0.197 in (5 mm)

MAX11604EEE+

Analog Devices

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

16

SSOP

Rectangular

Plastic/Epoxy

12

Yes

2.048 V

77 kHz

1

BICMOS

8

0.3906 %

5 V

Binary, 2's Complement Binary

5 V

Small Outline, Shrink Pitch

SSOP16,.25

Analog to Digital Converters

0.025 in (0.635 mm)

85 °C (185 °F)

-2.048 V

Serial

-40 °C (-40 °F)

Matte Tin - annealed

Track

Dual

6.1 µs

R-PDSO-G16

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e3

30 s

260 °C (500 °F)

0.193 in (4.89 mm)

AD7476SRTZ-R2

Analog Devices

Analog To Digital Converter, Successive Approximation

Military

Gull Wing

6

LSSOP

Rectangular

Plastic/Epoxy

1

Yes

3 V

1 MHz

1

CMOS

12

0.0366 %

3 V

Binary

2.5/5 V

Small Outline, Low Profile, Shrink Pitch

TSOP6,.11,37

Analog to Digital Converters

0.037 in (0.95 mm)

125 °C (257 °F)

0 mV

Serial

-55 °C (-67 °F)

Nickel Palladium Gold

Track

Dual

1.33 µs

R-PDSO-G6

1

0.057 in (1.45 mm)

0.063 in (1.6 mm)

No

e4

260 °C (500 °F)

0.114 in (2.9 mm)

LTC1856IG#TRPBF

Analog Devices

Analog To Digital Converter, Proprietary Method

Industrial

Gull Wing

28

SSOP

Rectangular

Plastic/Epoxy

8

Yes

10 V

100 kHz

1

14

0.0183 %

5 V

2's Complement Binary

Small Outline, Shrink Pitch

0.026 in (0.65 mm)

85 °C (185 °F)

-10 V

Serial

-40 °C (-40 °F)

Matte Tin

Sample

Dual

5 µs

R-PDSO-G28

1

0.079 in (2 mm)

0.209 in (5.3 mm)

No

e3

30 s

260 °C (500 °F)

0.402 in (10.2 mm)

MCP3208-BI/SLG

Microchip Technology

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

16

SOP

Rectangular

Plastic/Epoxy

8

Yes

5 V

100 kHz

1

CMOS

12

0.0244 %

5 V

Binary

0 V

Small Outline

0.05 in (1.27 mm)

85 °C (185 °F)

0 mV

Serial

-40 °C (-40 °F)

Matte Tin

Sample

Dual

6 µs

R-PDSO-G16

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e3

40 s

260 °C (500 °F)

0.39 in (9.9 mm)

MCP3564-E/ST

Microchip Technology

Analog To Digital Converter, Delta-Sigma

Automotive

Gull Wing

20

TSSOP

Rectangular

Plastic/Epoxy

4

Yes

3.6 V

153.6 kHz

1

24

2.2 mA

3.3 V

2's Complement Binary

Small Outline, Thin Profile, Shrink Pitch

TSSOP20,.25

0.026 in (0.65 mm)

125 °C (257 °F)

2.7 V

Serial

-40 °C (-40 °F)

Sample

Dual

R-PDSO-G20

0.047 in (1.2 mm)

0.173 in (4.4 mm)

0.256 in (6.5 mm)

AD7918BRUZ-REEL7

Analog Devices

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

20

TSSOP

Rectangular

Plastic/Epoxy

8

Yes

5 V

1 MHz

1

10

0.0488 %

3 V

Binary, 2's Complement Binary

3/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP20,.25

Analog to Digital Converters

0.026 in (0.65 mm)

85 °C (185 °F)

0 mV

Serial

-40 °C (-40 °F)

Matte Tin

Track

Dual

800 ns

R-PDSO-G20

1

0.047 in (1.2 mm)

0.173 in (4.4 mm)

No

e3

30 s

260 °C (500 °F)

0.256 in (6.5 mm)

ADC128D818CIMT

Texas Instruments

Analog To Digital Converter, Delta-Sigma

Automotive

Gull Wing

16

SSOP

Rectangular

Plastic/Epoxy

8

Yes

5.55 V

1

12

0.0977 %

3.3 V

Binary, 2's Complement Binary

Small Outline, Shrink Pitch

0.026 in (0.65 mm)

125 °C (257 °F)

-50 mV

Serial

-40 °C (-40 °F)

Dual

R-PDSO-G16

0.173 in (4.4 mm)

No

0.197 in (5 mm)

AD7701BNZ

Analog Devices

Analog To Digital Converter, Delta-Sigma

Industrial

Through-Hole

20

DIP

Rectangular

Plastic/Epoxy

1

No

2.5 V

16 kHz

1

CMOS

16

0.0015 %

5 V

Binary, Offset Binary

-5 V

In-Line

0.1 in (2.54 mm)

85 °C (185 °F)

-2.5 V

Serial

-40 °C (-40 °F)

Matte Tin

Sample

Dual

R-PDIP-T20

0.21 in (5.33 mm)

0.3 in (7.62 mm)

No

e3

0.992 in (25.2 mm)

ADS1110A0IDBVR

Texas Instruments

Analog To Digital Converter, Delta-Sigma

Industrial

Gull Wing

6

LSSOP

Rectangular

Plastic/Epoxy

1

Yes

5.5 V

128 Hz

1

16

350 μA

0.01 %

5 V

2's Complement Binary

3/5 V

Small Outline, Low Profile, Shrink Pitch

TSOP6,.11,37

Analog to Digital Converters

2.7 V

0.037 in (0.95 mm)

85 °C (185 °F)

-200 mV

Serial

-40 °C (-40 °F)

Nickel Palladium Gold

Dual

R-PDSO-G6

1

0.057 in (1.45 mm)

0.063 in (1.6 mm)

No

e4

30 s

260 °C (500 °F)

0.114 in (2.9 mm)

ADS7805UBE4

Texas Instruments

Analog To Digital Converter, Successive Approximation

Other

Gull Wing

28

SOP

Rectangular

Plastic/Epoxy

1

Yes

10 V

100 kHz

1

CMOS

16

0.0046 %

5 V

2's Complement Binary

5 V

Small Outline

SOP28,.4

Analog to Digital Converters

4.75 V

0.05 in (1.27 mm)

85 °C (185 °F)

-10 V

Parallel, Word

-25 °C (-13 °F)

Nickel Palladium Gold

Sample

Dual

8 µs

R-PDSO-G28

3

0.104 in (2.65 mm)

0.295 in (7.5 mm)

No

e4

30 s

260 °C (500 °F)

0.705 in (17.9 mm)

AMC3336QDWERQ1

Texas Instruments

Analog To Digital Converter, Delta-Sigma

Industrial

Gull Wing

16

SOP

Rectangular

Plastic/Epoxy

1

Yes

1 V

1

AEC-Q100

16

42.5 mA

0.006103516 %

3.3 V

Binary

Small Outline

SOP16,.4

0.05 in (1.27 mm)

85 °C (185 °F)

-1 V

Serial

-40 °C (-40 °F)

Nickel Palladium Gold

Dual

R-PDSO-G16

3

0.104 in (2.65 mm)

0.295 in (7.5 mm)

Peak-to-peak input voltage range: 1 V

e4

30 s

260 °C (500 °F)

0.406 in (10.3 mm)

LTC1867LAIGN#TRPBF

Analog Devices

Analog To Digital Converter, Proprietary Method

Industrial

Gull Wing

16

SSOP

Rectangular

Plastic/Epoxy

8

Yes

1.25 V

175 kHz

1

16

0.0046 %

2.7 V

Binary, 2's Complement Binary

Small Outline, Shrink Pitch

0.025 in (0.635 mm)

85 °C (185 °F)

-1.25 V

Serial

-40 °C (-40 °F)

Matte Tin

Sample

Dual

3.7 µs

R-PDSO-G16

1

0.069 in (1.75 mm)

0.154 in (3.899 mm)

No

e3

30 s

260 °C (500 °F)

0.193 in (4.89 mm)

ADS8345NB

Texas Instruments

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

20

SSOP

Rectangular

Plastic/Epoxy

8

Yes

2.6 V

100 kHz

1

CMOS

16

2 mA

0.0092 %

5 V

2's Complement Binary

2.7/5 V

Small Outline, Shrink Pitch

SSOP20,.3

Analog to Digital Converters

2.7 V

0.026 in (0.65 mm)

85 °C (185 °F)

-2.5 V

Serial

-40 °C (-40 °F)

Nickel Palladium Gold

Sample

Dual

6.66 µs

R-PDSO-G20

2

0.079 in (2 mm)

0.209 in (5.3 mm)

No

e4

30 s

260 °C (500 °F)

0.283 in (7.2 mm)

LTC1867LIGN#WPBF

Analog Devices

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

16

SSOP

Rectangular

Plastic/Epoxy

8

Yes

1.25 V

175 kHz

1

CMOS

AEC-Q100

16

1 mA

0.0061 %

3 V

Binary, 2's Complement Binary

Small Outline, Shrink Pitch

SSOP16,.25

0.025 in (0.635 mm)

85 °C (185 °F)

-1.25 V

Serial

-40 °C (-40 °F)

Matte Tin - annealed

Sample

Dual

3.7 µs

R-PDSO-G16

1

0.069 in (1.75 mm)

0.154 in (3.899 mm)

e3

30 s

260 °C (500 °F)

0.193 in (4.8895 mm)

TLC1543QDWREP

Texas Instruments

Analog To Digital Converter, Successive Approximation

Automotive

Gull Wing

20

SOP

Rectangular

Plastic/Epoxy

11

Yes

5.5 V

38 kHz

1

CMOS

10

2.5 mA

0.0977 %

5 V

Binary

3.3 V

Small Outline

SOP20,.4

Analog to Digital Converters

4.5 V

0.05 in (1.27 mm)

125 °C (257 °F)

0 mV

Serial

-40 °C (-40 °F)

Nickel Palladium Gold

Sample

Dual

21 µs

R-PDSO-G20

1

0.104 in (2.65 mm)

0.295 in (7.5 mm)

No

e4

30 s

260 °C (500 °F)

0.504 in (12.8 mm)

AD7918BRUZ-REEL

Analog Devices

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

20

TSSOP

Rectangular

Plastic/Epoxy

8

Yes

5 V

1 MHz

1

10

0.0488 %

3 V

Binary, 2's Complement Binary

3/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP20,.25

Analog to Digital Converters

0.026 in (0.65 mm)

85 °C (185 °F)

0 mV

Serial

-40 °C (-40 °F)

Matte Tin

Track

Dual

800 ns

R-PDSO-G20

1

0.047 in (1.2 mm)

0.173 in (4.4 mm)

No

e3

260 °C (500 °F)

0.256 in (6.5 mm)

ADS7808U

Texas Instruments

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

20

SOP

Rectangular

Plastic/Epoxy

1

Yes

10 V

100 kHz

1

CMOS

12

0.022 %

5 V

Binary, 2's Complement Binary

5 V

Small Outline

SOP20,.4

Analog to Digital Converters

4.75 V

0.05 in (1.27 mm)

85 °C (185 °F)

-10 V

Serial

-40 °C (-40 °F)

Nickel Palladium Gold

Sample

Dual

8 µs

R-PDSO-G20

3

0.104 in (2.65 mm)

0.295 in (7.5 mm)

No

e4

30 s

260 °C (500 °F)

0.504 in (12.8 mm)

ADS8332IBPWR

Texas Instruments

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

24

TSSOP

Rectangular

Plastic/Epoxy

8

Yes

4.2 V

500 kHz

1

CMOS

16

6.5 mA

0.0031 %

5 V

Binary

2.7/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP24,.25

Analog to Digital Converters

1.65 V

0.026 in (0.65 mm)

85 °C (185 °F)

0 mV

Serial

-40 °C (-40 °F)

Nickel Palladium Gold

Sample

Dual

2 µs

R-PDSO-G24

2

0.047 in (1.2 mm)

0.173 in (4.4 mm)

No

e4

30 s

260 °C (500 °F)

0.307 in (7.8 mm)

LTC1286CS8

Analog Devices

Analog To Digital Converter, Successive Approximation

Commercial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

1

Yes

5.05 V

12.5 kHz

1

CMOS

12

500 μA

0.0488 %

5 V

Binary

Small Outline

0.05 in (1.27 mm)

70 °C (158 °F)

-50 mV

Serial

0 °C (32 °F)

Tin/Lead

Sample

Dual

R-PDSO-G8

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e0

20 s

235 °C (455 °F)

0.193 in (4.9 mm)

MAX11040KGUU+T

Analog Devices

Analog To Digital Converter

Industrial

Gull Wing

38

TSSOP

Rectangular

Plastic/Epoxy

4

Yes

2.2 V

3.072 MHz

1

BICMOS

24

0.004 %

2's Complement Binary

3/3.3,3.3 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP38,.25,20

Analog to Digital Converters

0.02 in (0.5 mm)

105 °C (221 °F)

-2.2 V

Serial

-40 °C (-40 °F)

Matte Tin - annealed

Track

Dual

R-PDSO-G38

3

0.043 in (1.1 mm)

0.173 in (4.4 mm)

No

e3

30 s

260 °C (500 °F)

0.382 in (9.7 mm)

AD7323BRUZ-REEL

Analog Devices

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

16

TSSOP

Rectangular

Plastic/Epoxy

4

Yes

10 V

500 kHz

1

CMOS

12

0.0269 %

5 V

Binary, 2's Complement Binary

3/5,±15 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP16,.25

Analog to Digital Converters

0.026 in (0.65 mm)

85 °C (185 °F)

-10 V

Serial

-40 °C (-40 °F)

Matte Tin

Track

Dual

1.6 µs

R-PDSO-G16

1

0.047 in (1.2 mm)

0.173 in (4.4 mm)

No

e3

30 s

260 °C (500 °F)

0.197 in (5 mm)

ADC0804LCN/NOPB

Texas Instruments

Analog To Digital Converter, Successive Approximation

Industrial

Through-Hole

20

DIP

Rectangular

Plastic/Epoxy

1

No

5.05 V

1

CMOS

8

0.3906 %

5 V

Binary

5 V

In-Line

DIP20,.3

Analog to Digital Converters

0.1 in (2.54 mm)

85 °C (185 °F)

-50 mV

Parallel, 8 Bits

-40 °C (-40 °F)

Matte Tin

Dual

114 µs

R-PDIP-T20

1

0.2 in (5.08 mm)

0.3 in (7.62 mm)

No

e3

1.027 in (26.075 mm)

Analog-to-Digital Converters

Analog-to-digital converters (ADCs) are electronic devices that convert continuous analog signals into digital signals, which can be processed by digital circuits, microcontrollers, or computers. ADCs are essential components in many electronic systems, as they allow the measurement and processing of physical signals, such as temperature, pressure, light, and sound.

ADCs work by sampling the analog signal at regular intervals and quantizing the sampled signal into a series of digital values. The sampling rate and the resolution of the ADC determine the accuracy and the bandwidth of the digital signal. ADCs may also include features such as amplification, filtering, or signal conditioning, to improve the accuracy and stability of the digital signal.

ADCs can be classified based on their architecture and their application. The most common types of ADCs are successive approximation ADCs, delta-sigma ADCs, and pipeline ADCs. Each type has its advantages and limitations, depending on the application and the required performance.

ADCs are used in a wide range of applications, from consumer electronics, such as smartphones and digital cameras, to industrial automation, medical devices, and scientific instruments. They play a crucial role in the conversion of physical signals into digital signals, allowing the processing, storage, and transmission of data in electronic systems.

Overall, ADCs are essential components in many electronic systems, providing the necessary signal conversion for a wide range of applications. Their accuracy, speed, and resolution determine the performance and the functionality of many electronic devices and systems.