Rectangular Analog-to-Digital Converters 2,400+

Reset All
Part RoHS Manufacturer Converter Type Temperature Grade Terminal Form No. of Terminals Package Code Package Shape Total Dose (V) Package Body Material No. of Analog In Channels Surface Mount Maximum Supply Voltage Maximum Analog Input Voltage Sample Rate No. of Functions Technology Screening Level Nominal Bandwidth No. of Bits Maximum Supply Current Maximum Linearity Error (EL) Nominal Supply Voltage Output Bit Code Power Supplies (V) Nominal Negative Supply Voltage Package Style (Meter) Package Equivalence Code Sub-Category Minimum Supply Voltage Terminal Pitch Maximum Operating Temperature Minimum Analog Input Voltage Output Format Minimum Operating Temperature Terminal Finish Sample and Hold/Track and Hold Terminal Position Maximum Conversion Time JESD-30 Code Moisture Sensitivity Level (MSL) Maximum Seated Height Width Qualification Additional Features JESD-609 Code Maximum Time At Peak Reflow Temperature (s) Peak Reflow Temperature (C) Length Input Bit Code

ADC08L060CIMTX/NOPB

Texas Instruments

Analog To Digital Converter, Resistance Ladder

Industrial

Gull Wing

24

TSSOP

Rectangular

Plastic/Epoxy

1

Yes

1.6 V

60 MHz

1

CMOS

8

15.9 mA

0.7422 %

3 V

Binary

3 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP24,.25

Analog to Digital Converters

0.026 in (0.65 mm)

85 °C (185 °F)

-1.6 V

Parallel, 8 Bits

-40 °C (-40 °F)

Matte Tin

Sample

Dual

16 ns

R-PDSO-G24

1

0.047 in (1.2 mm)

0.173 in (4.4 mm)

No

Peak-to-peak input voltage range: 1.6 V

e3

30 s

260 °C (500 °F)

0.307 in (7.8 mm)

ADC128S022CIMT

Texas Instruments

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

16

TSSOP

Rectangular

Plastic/Epoxy

8

Yes

5.25 V

200 kHz

1

CMOS

12

0.0244 %

3 V

Binary

3/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP16,.25

Analog to Digital Converters

0.026 in (0.65 mm)

105 °C (221 °F)

0 mV

Serial

-40 °C (-40 °F)

Tin Lead

Track

Dual

4.0625 µs

R-PDSO-G16

1

0.043 in (1.1 mm)

0.173 in (4.4 mm)

No

e0

260 °C (500 °F)

0.197 in (5 mm)

ADS1110A3IDBVT

Texas Instruments

Analog To Digital Converter, Delta-Sigma

Industrial

Gull Wing

6

LSSOP

Rectangular

Plastic/Epoxy

1

Yes

5.5 V

128 Hz

1

16

350 μA

0.01 %

5 V

2's Complement Binary

3/5 V

Small Outline, Low Profile, Shrink Pitch

TSOP6,.11,37

Analog to Digital Converters

2.7 V

0.037 in (0.95 mm)

85 °C (185 °F)

-200 mV

Serial

-40 °C (-40 °F)

Nickel Palladium Gold

Dual

R-PDSO-G6

1

0.057 in (1.45 mm)

0.063 in (1.6 mm)

No

e4

30 s

260 °C (500 °F)

0.114 in (2.9 mm)

ADS1110A6IDBVT

Texas Instruments

Analog To Digital Converter, Delta-Sigma

Industrial

Gull Wing

6

LSSOP

Rectangular

Plastic/Epoxy

1

Yes

5.5 V

128 Hz

1

16

350 μA

0.01 %

5 V

2's Complement Binary

3/5 V

Small Outline, Low Profile, Shrink Pitch

TSOP6,.11,37

Analog to Digital Converters

2.7 V

0.037 in (0.95 mm)

85 °C (185 °F)

-200 mV

Serial

-40 °C (-40 °F)

Nickel Palladium Gold

Dual

R-PDSO-G6

1

0.057 in (1.45 mm)

0.063 in (1.6 mm)

No

e4

30 s

260 °C (500 °F)

0.114 in (2.9 mm)

ADS1110A7IDBVT

Texas Instruments

Analog To Digital Converter, Delta-Sigma

Industrial

Gull Wing

6

LSSOP

Rectangular

Plastic/Epoxy

1

Yes

5.5 V

128 Hz

1

16

350 μA

0.01 %

5 V

2's Complement Binary

3/5 V

Small Outline, Low Profile, Shrink Pitch

TSOP6,.11,37

Analog to Digital Converters

2.7 V

0.037 in (0.95 mm)

85 °C (185 °F)

-200 mV

Serial

-40 °C (-40 °F)

Nickel Palladium Gold

Dual

R-PDSO-G6

1

0.057 in (1.45 mm)

0.063 in (1.6 mm)

No

e4

30 s

260 °C (500 °F)

0.114 in (2.9 mm)

ADS7825U

Texas Instruments

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

28

SOP

Rectangular

Plastic/Epoxy

4

Yes

10 V

40 kHz

1

CMOS

16

0.0046 %

5 V

2's Complement Binary

5 V

Small Outline

SOP28,.4

Analog to Digital Converters

4.75 V

0.05 in (1.27 mm)

85 °C (185 °F)

-10 V

Serial, Parallel, 8 Bits

-40 °C (-40 °F)

Nickel Palladium Gold

Sample

Dual

20 µs

R-PDSO-G28

3

0.104 in (2.65 mm)

0.295 in (7.5 mm)

No

e4

30 s

260 °C (500 °F)

0.703 in (17.85 mm)

ADS7870EA/1KG4

Texas Instruments

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

28

SSOP

Rectangular

Plastic/Epoxy

8

Yes

5.7 V

52 kHz

1

CMOS

12

1.7 mA

0.061 %

5 V

Binary, 2's Complement Binary

5 V

Small Outline, Shrink Pitch

SSOP28,.3

Analog to Digital Converters

0.026 in (0.65 mm)

85 °C (185 °F)

-200 mV

Serial

-40 °C (-40 °F)

Nickel Palladium Gold

Dual

4.8 µs

R-PDSO-G28

2

0.079 in (2 mm)

0.209 in (5.3 mm)

No

e4

30 s

260 °C (500 °F)

0.402 in (10.2 mm)

ADS7886SDCKR

Texas Instruments

Analog To Digital Converter, Successive Approximation

Automotive

Gull Wing

6

TSSOP

Rectangular

Plastic/Epoxy

1

Yes

5.25 V

1 MHz

1

CMOS

12

1.5 mA

0.0488 %

3.3 V

Binary

2.5/5 V

Small Outline, Thin Profile, Shrink Pitch

TSOP6,.11,37

Analog to Digital Converters

2.35 V

0.026 in (0.65 mm)

125 °C (257 °F)

0 mV

Serial

-40 °C (-40 °F)

Matte Tin

Sample

Dual

800 ns

R-PDSO-G6

2

0.043 in (1.1 mm)

0.049 in (1.25 mm)

No

e3

30 s

260 °C (500 °F)

0.079 in (2 mm)

ADS7950QDBTRQ1

Texas Instruments

Analog To Digital Converter, Successive Approximation

Automotive

Gull Wing

30

TSSOP

Rectangular

Plastic/Epoxy

4

Yes

5.25 V

1 MHz

1

AEC-Q100

12

3 mA

0.0122 %

3.3 V

Binary

Small Outline, Thin Profile, Shrink Pitch

1.7 V

0.02 in (0.5 mm)

125 °C (257 °F)

0 mV

Serial

-40 °C (-40 °F)

Nickel Palladium Gold

Sample

Dual

800 ns

R-PDSO-G30

3

0.047 in (1.2 mm)

0.173 in (4.4 mm)

e4

30 s

260 °C (500 °F)

0.307 in (7.8 mm)

ADS8331IBPW

Texas Instruments

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

24

TSSOP

Rectangular

Plastic/Epoxy

4

Yes

4.2 V

500 kHz

1

CMOS

16

500 μA

0.0031 %

5 V

Binary

2.7/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP24,.25

Analog to Digital Converters

1.65 V

0.026 in (0.65 mm)

85 °C (185 °F)

0 mV

Serial

-40 °C (-40 °F)

Nickel Palladium Gold

Sample

Dual

R-PDSO-G24

2

0.047 in (1.2 mm)

0.173 in (4.4 mm)

No

e4

30 s

260 °C (500 °F)

0.307 in (7.8 mm)

ADS8345EB

Texas Instruments

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

20

SSOP

Rectangular

Plastic/Epoxy

8

Yes

2.6 V

100 kHz

1

CMOS

16

2 mA

0.0092 %

5 V

2's Complement Binary

2.7/5 V

Small Outline, Shrink Pitch

SSOP20,.25

Analog to Digital Converters

2.7 V

0.025 in (0.635 mm)

85 °C (185 °F)

-2.5 V

Serial

-40 °C (-40 °F)

Nickel Palladium Gold

Sample

Dual

6.66 µs

R-PDSO-G20

2

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e4

30 s

260 °C (500 °F)

0.341 in (8.65 mm)

AK5357ET

Asahi Kasei Microdevices

Analog To Digital Converter, Delta-Sigma

Other

Gull Wing

16

TSSOP

Rectangular

Plastic/Epoxy

2

Yes

3 V

1

24

5 V

2's Complement Binary

Small Outline, Thin Profile, Shrink Pitch

0.026 in (0.65 mm)

85 °C (185 °F)

0 mV

Serial

-20 °C (-4 °F)

Dual

R-PDSO-G16

0.043 in (1.1 mm)

0.173 in (4.4 mm)

No

0.197 in (5 mm)

CS5524-ASZ

Cirrus Logic

Analog To Digital Converter, Delta-Sigma

Industrial

Gull Wing

24

SSOP

Rectangular

Plastic/Epoxy

4

Yes

5.25 V

1

CMOS

24

0.0015 %

5 V

Offset Binary, 2's Complement Binary

3.3/5,5 V

Small Outline, Shrink Pitch

SSOP24,.3

Other Converters

0.026 in (0.65 mm)

85 °C (185 °F)

-1.8 V

Serial

-40 °C (-40 °F)

Matte Tin

Dual

R-PDSO-G24

3

0.084 in (2.13 mm)

0.209 in (5.3 mm)

No

e3

260 °C (500 °F)

0.323 in (8.2 mm)

HI1-574ASD-2

Renesas Electronics

Analog To Digital Converter, Successive Approximation

Military

Through-Hole

28

DIP

Rectangular

Ceramic, Metal-Sealed Cofired

2

No

10 V

1

BICMOS

12

0.0244 %

12 V

Binary

-12 V

In-Line

0.1 in (2.54 mm)

125 °C (257 °F)

-10 V

Parallel, Word

-55 °C (-67 °F)

Gold

Sample

Dual

25 µs

R-CDIP-T28

0.233 in (5.92 mm)

0.6 in (15.24 mm)

No

e4

HI1-574ASD2

Thomson Consumer Electronics

Analog To Digital Converter, Successive Approximation

Military

Through-Hole

28

DIP

Rectangular

Ceramic, Metal-Sealed Cofired

2

No

10 V

1

BICMOS

12

0.0244 %

12 V

Binary

5,±12/±15 V

-12 V

In-Line

DIP28,.6

Analog to Digital Converters

0.1 in (2.54 mm)

125 °C (257 °F)

-10 V

Parallel, Word

-55 °C (-67 °F)

Gold

Sample

Dual

25 µs

R-CDIP-T28

0.233 in (5.92 mm)

0.6 in (15.24 mm)

No

e4

LTC1272-8CCSW#TRPBF

Analog Devices

Analog To Digital Converter, Successive Approximation

Commercial

Gull Wing

24

SOP

Rectangular

Plastic/Epoxy

1

Yes

15 V

250 kHz

1

BICMOS

12

0.0244 %

5 V

Binary

Small Outline

0.05 in (1.27 mm)

70 °C (158 °F)

-300 mV

Parallel, Word

0 °C (32 °F)

Matte Tin

Sample

Dual

8 ms

R-PDSO-G24

1

0.104 in (2.642 mm)

0.295 in (7.493 mm)

No

e3

30 s

260 °C (500 °F)

0.606 in (15.395 mm)

LTC1285CS8#PBF

Analog Devices

Analog To Digital Converter, Successive Approximation

Commercial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

1

Yes

3.05 V

7.5 kHz

1

CMOS

12

320 μA

0.0488 %

3 V

Binary

Small Outline

0.05 in (1.27 mm)

70 °C (158 °F)

-50 mV

Serial

0 °C (32 °F)

Matte Tin

Sample

Dual

R-PDSO-G8

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e3

30 s

260 °C (500 °F)

0.193 in (4.9 mm)

LTC1286IS8

Analog Devices

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

1

Yes

5.05 V

12.5 kHz

1

CMOS

12

500 μA

0.0488 %

5 V

Binary

Small Outline

0.05 in (1.27 mm)

85 °C (185 °F)

-50 mV

Serial

-40 °C (-40 °F)

Tin Lead

Sample

Dual

R-PDSO-G8

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e0

0.193 in (4.9 mm)

LTC1286IS8#TR

Analog Devices

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

1

Yes

5.05 V

12.5 kHz

1

CMOS

12

500 μA

0.0488 %

5 V

Binary

Small Outline

0.05 in (1.27 mm)

85 °C (185 °F)

-50 mV

Serial

-40 °C (-40 °F)

Tin/Lead

Sample

Dual

R-PDSO-G8

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e0

0.193 in (4.9 mm)

LTC1286IS8#TRPBF

Analog Devices

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

1

Yes

5.05 V

12.5 kHz

1

CMOS

12

500 μA

0.0488 %

5 V

Binary

Small Outline

0.05 in (1.27 mm)

85 °C (185 °F)

-50 mV

Serial

-40 °C (-40 °F)

Matte Tin

Sample

Dual

R-PDSO-G8

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e3

30 s

260 °C (500 °F)

0.193 in (4.9 mm)

LTC1290CCSW#PBF

Analog Devices

Analog To Digital Converter, Successive Approximation

Commercial

Gull Wing

20

SOP

Rectangular

Plastic/Epoxy

8

Yes

5.05 V

50 kHz

1

CMOS

12

0.0122 %

5 V

2's Complement Binary

-5 V

Small Outline

0.05 in (1.27 mm)

70 °C (158 °F)

-5.05 V

Serial

0 °C (32 °F)

Matte Tin

Sample

Dual

13 µs

R-PDSO-G20

1

0.104 in (2.642 mm)

0.295 in (7.493 mm)

No

e3

30 s

260 °C (500 °F)

0.504 in (12.8015 mm)

LTC1290DCN#PBF

Analog Devices

Analog To Digital Converter, Successive Approximation

Commercial

Through-Hole

20

DIP

Rectangular

Plastic/Epoxy

8

No

5.05 V

50 kHz

1

CMOS

12

0.0183 %

5 V

2's Complement Binary

-5 V

In-Line

0.1 in (2.54 mm)

70 °C (158 °F)

-5.05 V

Serial

0 °C (32 °F)

Matte Tin

Sample

Dual

13 µs

R-PDIP-T20

1

0.155 in (3.937 mm)

0.3 in (7.62 mm)

No

e3

30 s

260 °C (500 °F)

LTC1292CCN8

Analog Devices

Analog To Digital Converter, Successive Approximation

Commercial

Through-Hole

8

DIP

Rectangular

Plastic/Epoxy

1

No

5.05 V

60 kHz

1

CMOS

12

0.0122 %

5 V

Binary

In-Line

0.1 in (2.54 mm)

70 °C (158 °F)

-50 mV

Serial

0 °C (32 °F)

Tin Lead

Sample

Dual

12 µs

R-PDIP-T8

1

0.155 in (3.937 mm)

0.3 in (7.62 mm)

No

e0

LTC1292CCN8#PBF

Analog Devices

Analog To Digital Converter, Successive Approximation

Commercial

Through-Hole

8

DIP

Rectangular

Plastic/Epoxy

1

No

5.05 V

60 kHz

1

CMOS

12

0.0122 %

5 V

Binary

In-Line

0.1 in (2.54 mm)

70 °C (158 °F)

-50 mV

Serial

0 °C (32 °F)

Matte Tin

Sample

Dual

12 µs

R-PDIP-T8

1

0.155 in (3.937 mm)

0.3 in (7.62 mm)

No

e3

30 s

260 °C (500 °F)

LTC2380IMS-16#PBF

Analog Devices

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

16

TSSOP

Rectangular

Plastic/Epoxy

1

Yes

5.1 V

2 MHz

1

CMOS

16

0.0009 %

2.5 V

2's Complement Binary

Small Outline, Thin Profile, Shrink Pitch

0.02 in (0.5 mm)

85 °C (185 °F)

-2.5 V

Serial

-40 °C (-40 °F)

Matte Tin - annealed

Sample

Dual

322 ns

R-PDSO-G16

1

0.043 in (1.1 mm)

0.118 in (3 mm)

No

e3

30 s

260 °C (500 °F)

0.159 in (4.039 mm)

LTC2449CUHF#TR

Analog Devices

Analog To Digital Converter, Delta-Sigma

Commercial

No Lead

38

HVQCCN

Rectangular

Plastic/Epoxy

16

Yes

2.75 V

1

24

5 V

Binary

Chip Carrier, Heat Sink/Slug, Very Thin Profile

0.02 in (0.5 mm)

70 °C (158 °F)

-50 mV

Serial

0 °C (32 °F)

Tin Lead

Quad

170 ms

R-PQCC-N38

1

0.031 in (0.8 mm)

0.197 in (5 mm)

No

e0

0.276 in (7 mm)

LTC2473IMS#PBF

Analog Devices

Analog To Digital Converter, Delta-Sigma

Industrial

Gull Wing

12

TSSOP

Rectangular

Plastic/Epoxy

1

Yes

1.253 V

1

CMOS

16

0.0183 %

Binary

Small Outline, Thin Profile, Shrink Pitch

0.026 in (0.65 mm)

85 °C (185 °F)

0 mV

Serial

-40 °C (-40 °F)

Matte Tin - annealed

Dual

4.8 ms

R-PDSO-G12

1

0.043 in (1.1 mm)

0.118 in (3 mm)

No

e3

30 s

260 °C (500 °F)

0.159 in (4.039 mm)

MAX1067AEEE-T

Maxim Integrated

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

16

SSOP

Rectangular

Plastic/Epoxy

4

Yes

5.25 V

200 kHz

1

BICMOS

14

0.0061 %

5 V

Binary

5 V

Small Outline, Shrink Pitch

SSOP16,.25

Analog to Digital Converters

0.025 in (0.635 mm)

85 °C (185 °F)

0 mV

Serial

-40 °C (-40 °F)

Tin Lead

Track

Dual

7.07 µs

R-PDSO-G16

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e0

0.193 in (4.9 mm)

MAX1067AEEE+T

Analog Devices

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

16

SSOP

Rectangular

Plastic/Epoxy

4

Yes

5.25 V

200 kHz

1

BICMOS

14

0.0061 %

5 V

Binary

5 V

Small Outline, Shrink Pitch

SSOP16,.25

Analog to Digital Converters

0.025 in (0.635 mm)

85 °C (185 °F)

0 mV

Serial

-40 °C (-40 °F)

Tin Lead

Track

Dual

7.07 µs

R-PDSO-G16

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e0

0.193 in (4.9 mm)

MAX1149BEUP-T

Maxim Integrated

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

20

TSSOP

Rectangular

Plastic/Epoxy

4

Yes

2.52 V

116.66 kHz

1

BICMOS

14

0.0122 %

3.3 V

Binary, 2's Complement Binary

3.3 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP20,.25

Analog to Digital Converters

0.026 in (0.65 mm)

85 °C (185 °F)

0 mV

Serial

-40 °C (-40 °F)

Tin Lead

Track

Dual

8 µs

R-PDSO-G20

1

0.043 in (1.1 mm)

0.173 in (4.4 mm)

No

e0

0.256 in (6.5 mm)

MAX1149BEUP+T

Analog Devices

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

20

TSSOP

Rectangular

Plastic/Epoxy

4

Yes

2.52 V

116.66 kHz

1

BICMOS

14

0.0122 %

3.3 V

Binary, 2's Complement Binary

3.3 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP20,.25

Analog to Digital Converters

0.026 in (0.65 mm)

85 °C (185 °F)

0 mV

Serial

-40 °C (-40 °F)

Matte Tin - annealed

Track

Dual

8 µs

R-PDSO-G20

1

0.043 in (1.1 mm)

0.173 in (4.4 mm)

No

e3

30 s

260 °C (500 °F)

0.256 in (6.5 mm)

MAX11609EEE+T

Analog Devices

Digital To Analog Converter

Industrial

Gull Wing

16

SSOP

Rectangular

Plastic/Epoxy

8

Yes

1.8 V

94.4 kHz

1

BICMOS

10

0.0977 %

2's Complement Binary

3/3.3 V

Small Outline, Shrink Pitch

SSOP16,.25

Analog to Digital Converters

0.026 in (0.65 mm)

85 °C (185 °F)

-500 mV

Serial

-40 °C (-40 °F)

Matte Tin - annealed

Track

Dual

6.8 µs

R-PDSO-G16

1

0.069 in (1.75 mm)

0.153 in (3.89 mm)

No

e3

30 s

260 °C (500 °F)

0.193 in (4.9 mm)

MAX11610EEE+T

Analog Devices

Digital To Analog Converter

Industrial

Gull Wing

16

SSOP

Rectangular

Plastic/Epoxy

12

Yes

2.75 V

94.4 kHz

1

BICMOS

10

0.0977 %

5 V

2's Complement Binary

5 V

Small Outline, Shrink Pitch

SSOP16,.25

Analog to Digital Converters

0.026 in (0.65 mm)

85 °C (185 °F)

-500 mV

Serial

-40 °C (-40 °F)

Matte Tin - annealed

Track

Dual

6.8 µs

R-PDSO-G16

1

0.069 in (1.75 mm)

0.153 in (3.89 mm)

No

e3

30 s

260 °C (500 °F)

0.193 in (4.9 mm)

MAX1241AESA

Maxim Integrated

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

1

Yes

2.52 V

73 kHz

1

BICMOS

12

0.0122 %

3 V

Binary

3/5 V

Small Outline

SOP8,.25

Analog to Digital Converters

0.05 in (1.27 mm)

85 °C (185 °F)

0 mV

Serial

-40 °C (-40 °F)

Tin Lead

Track

Dual

7.5 µs

R-PDSO-G8

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e0

245 °C (473 °F)

0.193 in (4.9 mm)

MAX1241AESA+

Analog Devices

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

1

Yes

5.3 V

73 kHz

1

BICMOS

12

0.0122 %

3 V

Binary

3/5 V

Small Outline

SOP8,.25

Analog to Digital Converters

0.05 in (1.27 mm)

85 °C (185 °F)

0 mV

Serial

-40 °C (-40 °F)

Matte Tin - annealed

Track

Dual

7.5 µs

R-PDSO-G8

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e3

30 s

260 °C (500 °F)

0.193 in (4.9 mm)

MCP3562R-E/ST

Microchip Technology

Analog To Digital Converter, Delta-Sigma

Automotive

Gull Wing

20

TSSOP

Rectangular

Plastic/Epoxy

4

Yes

3.6 V

153.6 kHz

1

24

2.5 mA

0.0032 %

3.3 V

2's Complement Binary

Small Outline, Thin Profile, Shrink Pitch

TSSOP20,.25

0.026 in (0.65 mm)

125 °C (257 °F)

-2.7 V

Serial

-40 °C (-40 °F)

Sample

Dual

R-PDSO-G20

0.047 in (1.2 mm)

0.173 in (4.4 mm)

0.256 in (6.5 mm)

PCM1862DBT

Texas Instruments

Analog To Digital Converter, Proprietary Method

Automotive

Gull Wing

30

TSSOP

Rectangular

Plastic/Epoxy

2

Yes

192 kHz

1

AEC-Q100

24

3.3 V

2's Complement Binary

Small Outline, Thin Profile, Shrink Pitch

0.02 in (0.5 mm)

125 °C (257 °F)

Serial

-40 °C (-40 °F)

Nickel Palladium Gold

Dual

R-PDSO-G30

2

0.047 in (1.2 mm)

0.173 in (4.4 mm)

e4

30 s

260 °C (500 °F)

0.307 in (7.8 mm)

PCM1863DBT

Texas Instruments

Analog To Digital Converter, Proprietary Method

Automotive

Gull Wing

30

TSSOP

Rectangular

Plastic/Epoxy

2

Yes

48 kHz

1

24

3.3 V

2's Complement Binary

Small Outline, Thin Profile, Shrink Pitch

0.02 in (0.5 mm)

125 °C (257 °F)

Serial

-40 °C (-40 °F)

Nickel Palladium Gold

Sample

Dual

R-PDSO-G30

2

0.047 in (1.2 mm)

0.173 in (4.4 mm)

e4

30 s

260 °C (500 °F)

0.307 in (7.8 mm)

PCM1864DBTR

Texas Instruments

Analog To Digital Converter, Proprietary Method

Automotive

Gull Wing

30

TSSOP

Rectangular

Plastic/Epoxy

4

Yes

192 kHz

1

AEC-Q100

24

3.3 V

2's Complement Binary

Small Outline, Thin Profile, Shrink Pitch

0.02 in (0.5 mm)

125 °C (257 °F)

Serial

-40 °C (-40 °F)

Nickel Palladium Gold

Dual

R-PDSO-G30

2

0.047 in (1.2 mm)

0.173 in (4.4 mm)

e4

30 s

260 °C (500 °F)

0.307 in (7.8 mm)

TC7106ACPL

Microchip Technology

Analog To Digital Converter, Dual-Slope

Commercial

Through-Hole

40

DIP

Rectangular

Plastic/Epoxy

1

No

3.35 V

1

CMOS

TS 16949

1.8 mA

5 V

Binary

15 V

In-Line

DIP40,.6

Analog to Digital Converters

0.1 in (2.54 mm)

70 °C (158 °F)

2.7 V

Parallel, Word

0 °C (32 °F)

Matte Tin

Dual

R-PDIP-T40

0.25 in (6.35 mm)

0.6 in (15.24 mm)

No

e3

2.038 in (51.753 mm)

TC7109ACPL

Microchip Technology

Analog To Digital Converter, Dual-Slope

Commercial

Through-Hole

40

DIP

Rectangular

Plastic/Epoxy

1

No

3.5 V

1

CMOS

TS 16949

12

0.024 %

5 V

Binary

±5 V

-5 V

In-Line

DIP40,.6

Analog to Digital Converters

0.1 in (2.54 mm)

70 °C (158 °F)

-3.5 V

Parallel, Word

0 °C (32 °F)

Matte Tin

Dual

R-PDIP-T40

0.2 in (5.08 mm)

0.6 in (15.24 mm)

No

e3

2.046 in (51.97 mm)

TLC2543IDBRQ1

Texas Instruments

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

20

SSOP

Rectangular

Plastic/Epoxy

11

Yes

5.5 V

66 kHz

1

CMOS

AEC-Q100

12

2.5 mA

0.0244 %

5 V

Binary, 2's Complement Binary

5 V

Small Outline, Shrink Pitch

SSOP20,.3

Analog to Digital Converters

4.5 V

0.026 in (0.65 mm)

85 °C (185 °F)

0 mV

Serial

-40 °C (-40 °F)

Nickel Palladium Gold

Sample

Dual

10 µs

R-PDSO-G20

2

0.079 in (2 mm)

0.209 in (5.3 mm)

No

e4

30 s

260 °C (500 °F)

0.283 in (7.2 mm)

TLC2543QDWREP

Texas Instruments

Analog To Digital Converter, Successive Approximation

Automotive

Gull Wing

20

SOP

Rectangular

Plastic/Epoxy

11

Yes

5.5 V

66 kHz

1

CMOS

12

2.5 mA

0.0244 %

5 V

Binary, 2's Complement Binary

5 V

Small Outline

SOP20,.4

Analog to Digital Converters

4.5 V

0.05 in (1.27 mm)

125 °C (257 °F)

0 mV

Serial

-40 °C (-40 °F)

Nickel Palladium Gold

Sample

Dual

10 µs

R-PDSO-G20

1

0.104 in (2.65 mm)

0.295 in (7.5 mm)

No

e4

30 s

260 °C (500 °F)

0.504 in (12.8 mm)

TLV2541IDR

Texas Instruments

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

1

Yes

5.5 V

200 kHz

1

CMOS

12

1.5 mA

0.0244 %

3.3 V

Binary

3/5 V

Small Outline

SOP8,.25

Analog to Digital Converters

2.7 V

0.05 in (1.27 mm)

85 °C (185 °F)

0 mV

Serial

-40 °C (-40 °F)

Nickel/Palladium/Gold

Sample

Dual

3.5 µs

R-PDSO-G8

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e4

260 °C (500 °F)

0.193 in (4.9 mm)

TLV2553IDWRG4

Texas Instruments

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

20

SOP

Rectangular

Plastic/Epoxy

11

Yes

5.5 V

200 kHz

1

12

1.2 mA

0.0244 %

5 V

Binary, 2's Complement Binary

3/5 V

Small Outline

SOP20,.4

Analog to Digital Converters

0.05 in (1.27 mm)

85 °C (185 °F)

0 mV

Serial

-40 °C (-40 °F)

Nickel Palladium Gold

Sample

Dual

4.15 µs

R-PDSO-G20

1

0.104 in (2.65 mm)

0.295 in (7.5 mm)

No

e4

30 s

260 °C (500 °F)

0.505 in (12.825 mm)

AD7091RBCPZ-RL7

Analog Devices

Analog To Digital Converter, Successive Approximation

Automotive

No Lead

10

HVSON

Rectangular

Plastic/Epoxy

1

Yes

2.525 V

1 MHz

1

CMOS

12

0.0244 %

3 V

Binary

3/5 V

Small Outline, Heat Sink/Slug, Very Thin Profile

SOLCC10,.08,20

Analog to Digital Converters

0.02 in (0.5 mm)

125 °C (257 °F)

0 mV

Serial

-40 °C (-40 °F)

Nickel Palladium Gold

Track

Dual

650 ns

R-PDSO-N10

1

0.033 in (0.85 mm)

0.079 in (2 mm)

No

e4

30 s

260 °C (500 °F)

0.118 in (3 mm)

AD7357BCPZ

Analog Devices

Analog To Digital Converter, Successive Approximation

Automotive

No Lead

18

HVQCCN

Rectangular

2

Yes

2.975 V

4.2 MHz

1

14

0.0183 %

2.5 V

Binary

Chip Carrier, Heat Sink/Slug, Very Thin Profile

0.026 in (0.65 mm)

125 °C (257 °F)

Serial

-40 °C (-40 °F)

Matte Tin

Sample

Quad

R-XQCC-N18

3

0.031 in (0.8 mm)

0.157 in (4 mm)

e3

30 s

260 °C (500 °F)

0.197 in (5 mm)

AD7705BNZ

Analog Devices

Analog To Digital Converter, Delta-Sigma

Industrial

Through-Hole

16

DIP

Rectangular

Plastic/Epoxy

2

No

2.5 V

19.2 kHz

1

CMOS

16

0.003 %

3 V

Binary, Offset Binary

3/5 V

In-Line

DIP16,.3

Other Converters

0.1 in (2.54 mm)

85 °C (185 °F)

-2.5 V

Serial

-40 °C (-40 °F)

Matte Tin

Dual

R-PDIP-T16

0.21 in (5.33 mm)

0.3 in (7.62 mm)

No

e3

0.79 in (20.07 mm)

Analog-to-Digital Converters

Analog-to-digital converters (ADCs) are electronic devices that convert continuous analog signals into digital signals, which can be processed by digital circuits, microcontrollers, or computers. ADCs are essential components in many electronic systems, as they allow the measurement and processing of physical signals, such as temperature, pressure, light, and sound.

ADCs work by sampling the analog signal at regular intervals and quantizing the sampled signal into a series of digital values. The sampling rate and the resolution of the ADC determine the accuracy and the bandwidth of the digital signal. ADCs may also include features such as amplification, filtering, or signal conditioning, to improve the accuracy and stability of the digital signal.

ADCs can be classified based on their architecture and their application. The most common types of ADCs are successive approximation ADCs, delta-sigma ADCs, and pipeline ADCs. Each type has its advantages and limitations, depending on the application and the required performance.

ADCs are used in a wide range of applications, from consumer electronics, such as smartphones and digital cameras, to industrial automation, medical devices, and scientific instruments. They play a crucial role in the conversion of physical signals into digital signals, allowing the processing, storage, and transmission of data in electronic systems.

Overall, ADCs are essential components in many electronic systems, providing the necessary signal conversion for a wide range of applications. Their accuracy, speed, and resolution determine the performance and the functionality of many electronic devices and systems.