Part | RoHS | Manufacturer | Converter Type | Temperature Grade | Terminal Form | No. of Terminals | Package Code | Package Shape | Total Dose (V) | Package Body Material | No. of Analog In Channels | Surface Mount | Maximum Supply Voltage | Maximum Analog Input Voltage | Sample Rate | No. of Functions | Technology | Screening Level | Nominal Bandwidth | No. of Bits | Maximum Supply Current | Maximum Linearity Error (EL) | Nominal Supply Voltage | Output Bit Code | Power Supplies (V) | Nominal Negative Supply Voltage | Package Style (Meter) | Package Equivalence Code | Sub-Category | Minimum Supply Voltage | Terminal Pitch | Maximum Operating Temperature | Minimum Analog Input Voltage | Output Format | Minimum Operating Temperature | Terminal Finish | Sample and Hold/Track and Hold | Terminal Position | Maximum Conversion Time | JESD-30 Code | Moisture Sensitivity Level (MSL) | Maximum Seated Height | Width | Qualification | Additional Features | JESD-609 Code | Maximum Time At Peak Reflow Temperature (s) | Peak Reflow Temperature (C) | Length | Input Bit Code |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Texas Instruments |
Analog To Digital Converter, Proprietary Method |
Industrial |
Ball |
292 |
HBGA |
Square |
Plastic/Epoxy |
2 |
Yes |
870 mV |
1600 MHz |
1 |
12 |
0.177 % |
1.9 V |
Offset Binary, 2's Complement Binary |
Grid Array, Heat Sink/Slug |
BGA292,20X20,50 |
0.05 in (1.27 mm) |
85 °C (185 °F) |
-870 mV |
Parallel, Word, Serial |
-40 °C (-40 °F) |
Track |
Bottom |
S-PBGA-B292 |
0.094 in (2.4 mm) |
1.063 in (27 mm) |
1.063 in (27 mm) |
|||||||||||||||||||||
|
Texas Instruments |
Analog To Digital Converter, Successive Approximation |
Industrial |
No Lead |
64 |
HVQCCN |
Square |
Plastic/Epoxy |
8 |
Yes |
4.45 V |
1 MHz |
1 |
16 |
0.0011 % |
5 V |
Binary |
-5 V |
Chip Carrier, Heat Sink/Slug, Very Thin Profile |
0.02 in (0.5 mm) |
85 °C (185 °F) |
-3 V |
Parallel, Word |
-40 °C (-40 °F) |
Nickel Palladium Gold |
Sample |
Quad |
650 ns |
S-PQCC-N64 |
3 |
0.039 in (1 mm) |
0.354 in (9 mm) |
No |
e4 |
30 s |
260 °C (500 °F) |
0.354 in (9 mm) |
|||||||||||||
Texas Instruments |
Analog To Digital Converter, Proprietary Method |
Industrial |
No Lead |
64 |
HVQCCN |
Square |
Plastic/Epoxy |
2 |
Yes |
2 V |
250 MHz |
1 |
16 |
1.8 V |
Offset Binary, 2's Complement Binary |
Chip Carrier, Heat Sink/Slug, Very Thin Profile |
0.02 in (0.5 mm) |
85 °C (185 °F) |
-2 V |
Serial |
-40 °C (-40 °F) |
Sample |
Quad |
S-PQCC-N64 |
0.039 in (1 mm) |
0.354 in (9 mm) |
0.354 in (9 mm) |
|||||||||||||||||||||||
|
Texas Instruments |
Analog To Digital Converter, Proprietary Method |
Industrial |
No Lead |
48 |
HVQCCN |
Square |
Plastic/Epoxy |
1 |
Yes |
2 V |
250 MHz |
1 |
12 |
0.061 % |
3.3 V |
Offset Binary, 2's Complement Binary |
1.8,3.3 V |
Chip Carrier, Heat Sink/Slug, Very Thin Profile |
LCC48,.27SQ,20 |
Analog to Digital Converters |
0.02 in (0.5 mm) |
85 °C (185 °F) |
0 mV |
Serial, Parallel, Word |
-40 °C (-40 °F) |
Nickel Palladium Gold |
Sample |
Quad |
S-PQCC-N48 |
3 |
0.039 in (1 mm) |
0.276 in (7 mm) |
No |
e4 |
30 s |
260 °C (500 °F) |
0.276 in (7 mm) |
||||||||||||
Texas Instruments |
Analog To Digital Converter, Successive Approximation |
Commercial |
J Bend |
20 |
QCCJ |
Square |
Plastic/Epoxy |
1 |
Yes |
6.8 V |
1 |
Bipolar |
8 |
2.5 mA |
0.195 % |
5 V |
Offset Binary |
Chip Carrier |
LDCC20,.4SQ |
Analog to Digital Converters |
0.05 in (1.27 mm) |
70 °C (158 °F) |
-300 mV |
Serial |
0 °C (32 °F) |
Quad |
32 µs |
S-PQCC-J20 |
0.18 in (4.57 mm) |
0.353 in (8.9662 mm) |
No |
0.353 in (8.9662 mm) |
||||||||||||||||||
|
Texas Instruments |
Analog To Digital Converter, Proprietary Method |
Industrial |
No Lead |
64 |
HVQCCN |
Square |
Plastic/Epoxy |
2 |
Yes |
2.5 V |
250 MHz |
1 |
16 |
160 mA |
0.0122 % |
1.8 V |
Offset Binary, 2's Complement Binary |
1.8,3.3 V |
Chip Carrier, Heat Sink/Slug, Very Thin Profile |
LCC64,.35SQ,20 |
Analog to Digital Converters |
0.02 in (0.5 mm) |
85 °C (185 °F) |
-2.5 V |
Serial |
-40 °C (-40 °F) |
Nickel Palladium Gold |
Sample |
Quad |
S-PQCC-N64 |
3 |
0.039 in (1 mm) |
0.354 in (9 mm) |
No |
Peak-to-peak input voltage range: 2.5 V |
e4 |
30 s |
260 °C (500 °F) |
0.354 in (9 mm) |
||||||||||
|
Texas Instruments |
Analog To Digital Converter, Proprietary Method |
Industrial |
No Lead |
60 |
VQCCN |
Square |
2 |
Yes |
1.5 V |
200 MHz |
1 |
CMOS |
11 |
41 mA |
0.0732 % |
1.8 V |
Offset Binary, 2's Complement Binary |
1.8 V |
Chip Carrier, Very Thin Profile |
LCC60,.35SQ,20 |
Analog to Digital Converters |
0.02 in (0.5 mm) |
85 °C (185 °F) |
-1.5 V |
Parallel, Word |
-40 °C (-40 °F) |
Matte Tin |
Sample |
Quad |
5 ns |
S-XQCC-N60 |
3 |
0.031 in (0.8 mm) |
0.354 in (9 mm) |
No |
Peak-to-peak input voltage range: 1.5 V |
e3 |
30 s |
260 °C (500 °F) |
0.354 in (9 mm) |
|||||||||
|
Texas Instruments |
Analog To Digital Converter, Proprietary Method |
Industrial |
No Lead |
64 |
HVQCCN |
Square |
Plastic/Epoxy |
1 |
Yes |
3 V |
105 MHz |
1 |
Bipolar |
16 |
330 mA |
0.0153 % |
3.3 V |
Offset Binary |
3.3,5 V |
Chip Carrier, Heat Sink/Slug, Very Thin Profile |
LCC64,.35SQ,20 |
Analog to Digital Converters |
0.02 in (0.5 mm) |
85 °C (185 °F) |
-3 V |
Parallel, Word |
-40 °C (-40 °F) |
Nickel Palladium Gold |
Track |
Quad |
S-PQCC-N64 |
3 |
0.039 in (1 mm) |
0.354 in (9 mm) |
No |
Peak-to-peak input voltage range: 3 V |
e4 |
30 s |
260 °C (500 °F) |
0.354 in (9 mm) |
|||||||||
|
Texas Instruments |
Analog To Digital Converter, Successive Approximation |
Industrial |
Gull Wing |
10 |
TSSOP |
Square |
Plastic/Epoxy |
4 |
Yes |
5.25 V |
500 kHz |
1 |
CMOS |
10 |
0.0586 % |
3 V |
Binary |
3/5 V |
Small Outline, Thin Profile, Shrink Pitch |
TSSOP10,.19,20 |
Analog to Digital Converters |
0.02 in (0.5 mm) |
85 °C (185 °F) |
0 mV |
Serial |
-40 °C (-40 °F) |
Matte Tin |
Track |
Dual |
4.0625 µs |
S-PDSO-G10 |
1 |
0.043 in (1.1 mm) |
0.118 in (3 mm) |
No |
e3 |
30 s |
260 °C (500 °F) |
0.118 in (3 mm) |
||||||||||
Texas Instruments |
Analog To Digital Converter, Proprietary Method |
Industrial |
Ball |
484 |
BGA |
Square |
Plastic/Epoxy |
2 |
Yes |
85 MHz |
2 |
14 |
3.3 V |
Binary, 2's Complement Binary |
Grid Array |
0.039 in (1 mm) |
85 °C (185 °F) |
Serial, Parallel, Word |
-40 °C (-40 °F) |
Sample |
Bottom |
S-PBGA-B484 |
0.095 in (2.42 mm) |
0.906 in (23 mm) |
No |
0.906 in (23 mm) |
||||||||||||||||||||||||
|
Texas Instruments |
Analog To Digital Converter, Proprietary Method |
Ball |
144 |
HFBGA |
Square |
Plastic/Epoxy |
4 |
Yes |
800 mV |
1300 MHz |
1 |
9 |
0.064453125 % |
1.1 V |
2’s Complement, Offset Binary |
Grid Array, Heat Sink/Slug, Fine Pitch |
BGA144,12X12,32 |
0.031 in (0.8 mm) |
85 °C (185 °F) |
-800 mV |
Serial |
-40 °C (-40 °F) |
Tin Silver Copper |
Bottom |
S-PBGA-B144 |
3 |
0.076 in (1.94 mm) |
0.394 in (10 mm) |
Peak-to-peak input voltage range: 0.8 V |
e1 |
30 s |
260 °C (500 °F) |
0.394 in (10 mm) |
||||||||||||||||
Texas Instruments |
Analog To Digital Converter, Flash Method |
Industrial |
J Bend |
20 |
QCCJ |
Square |
Plastic/Epoxy |
1 |
Yes |
10.2 V |
625 kHz |
1 |
CMOS |
8 |
13 mA |
0.39 % |
5 V |
Binary |
5 V |
Chip Carrier |
LDCC20,.4SQ |
Analog to Digital Converters |
0.05 in (1.27 mm) |
85 °C (185 °F) |
-200 mV |
Parallel, 8 Bits |
-40 °C (-40 °F) |
Track |
Quad |
2.5 µs |
S-PQCC-J20 |
0.18 in (4.57 mm) |
0.353 in (8.9662 mm) |
No |
0.353 in (8.9662 mm) |
|||||||||||||||
Texas Instruments |
Analog To Digital Converter, Proprietary Method |
Industrial |
Gull Wing |
64 |
TFQFP |
Square |
Plastic/Epoxy |
2 |
Yes |
2.6 V |
65 MHz |
1 |
CMOS |
12 |
0.0415 % |
3.3 V |
Offset Binary, 2's Complement Binary |
3.3 V |
Flatpack, Thin Profile, Fine Pitch |
TQFP64,.47SQ |
Analog to Digital Converters |
0.02 in (0.5 mm) |
85 °C (185 °F) |
0 mV |
Parallel, Word |
-40 °C (-40 °F) |
Tin Lead |
Sample |
Quad |
S-PQFP-G64 |
3 |
0.047 in (1.2 mm) |
0.394 in (10 mm) |
No |
e0 |
260 °C (500 °F) |
0.394 in (10 mm) |
|||||||||||||
|
Texas Instruments |
Analog To Digital Converter, Successive Approximation |
Industrial |
J Bend |
28 |
QCCJ |
Square |
Plastic/Epoxy |
8 |
Yes |
6 V |
25 kHz |
1 |
CMOS |
8 |
2.5 mA |
0.3906 % |
5 V |
Binary |
5 V |
Chip Carrier |
LDCC28,.5SQ |
Analog to Digital Converters |
4.5 V |
0.05 in (1.27 mm) |
85 °C (185 °F) |
0 mV |
Parallel, 8 Bits |
-40 °C (-40 °F) |
Matte Tin |
Quad |
60 µs |
S-PQCC-J28 |
2A |
0.18 in (4.57 mm) |
0.45 in (11.43 mm) |
No |
e3 |
30 s |
245 °C (473 °F) |
0.45 in (11.43 mm) |
|||||||||
|
Texas Instruments |
Analog To Digital Converter, Successive Approximation |
Industrial |
No Lead |
64 |
HVQCCN |
Square |
Plastic/Epoxy |
4 |
Yes |
4.096 V |
1 MHz |
1 |
16 |
50 mA |
0.0023 % |
5 V |
Binary |
±5,3/5 V |
-5 V |
Chip Carrier, Heat Sink/Slug, Very Thin Profile |
LCC64,.35SQ,20 |
Analog to Digital Converters |
0.02 in (0.5 mm) |
85 °C (185 °F) |
-4.096 V |
Parallel, Word |
-40 °C (-40 °F) |
Nickel Palladium Gold |
Sample |
Quad |
650 ns |
S-PQCC-N64 |
3 |
0.039 in (1 mm) |
0.354 in (9 mm) |
No |
e4 |
30 s |
260 °C (500 °F) |
0.354 in (9 mm) |
|||||||||
|
Texas Instruments |
Analog To Digital Converter, Flash Method |
Military |
No Lead |
64 |
HVQCCN |
Square |
Plastic/Epoxy |
2 |
Yes |
2 V |
125 MHz |
1 |
14 |
0.0305 % |
1.8 V |
Offset Binary, 2's Complement Binary |
Chip Carrier, Heat Sink/Slug, Very Thin Profile |
0.02 in (0.5 mm) |
125 °C (257 °F) |
-2 V |
Parallel, Word |
-55 °C (-67 °F) |
Nickel Palladium Gold |
Sample |
Quad |
S-PQCC-N64 |
3 |
0.039 in (1 mm) |
0.354 in (9 mm) |
Peak-to-peak input voltage range: 2 V |
e4 |
30 s |
260 °C (500 °F) |
0.354 in (9 mm) |
|||||||||||||||
|
Texas Instruments |
Analog To Digital Converter, Proprietary Method |
Industrial |
Gull Wing |
52 |
HTQFP |
Square |
Plastic/Epoxy |
1 |
Yes |
2.2 V |
105 MHz |
1 |
Bipolar |
11 |
410 mA |
0.0244 % |
5 V |
2's Complement Binary |
3.3,5 V |
Flatpack, Heat Sink/Slug, Thin Profile |
TQFP52,.47SQ,25 |
Analog to Digital Converters |
0.026 in (0.65 mm) |
85 °C (185 °F) |
0 mV |
Parallel, Word |
-40 °C (-40 °F) |
Nickel/Palladium/Gold |
Track |
Quad |
S-PQFP-G52 |
3 |
0.047 in (1.2 mm) |
0.394 in (10 mm) |
No |
Peak-to-peak input voltage range: 2.2 V |
e4 |
260 °C (500 °F) |
0.394 in (10 mm) |
||||||||||
Texas Instruments |
Analog To Digital Converter, Proprietary Method |
Automotive |
Gull Wing |
48 |
TFQFP |
Square |
Plastic/Epoxy |
1 |
Yes |
2 V |
1 MHz |
1 |
CMOS |
14 |
0.0153 % |
3.3 V |
Binary, 2's Complement Binary |
Flatpack, Thin Profile, Fine Pitch |
0.02 in (0.5 mm) |
125 °C (257 °F) |
-2 V |
Parallel, Word |
-40 °C (-40 °F) |
Sample |
Quad |
S-PQFP-G48 |
0.047 in (1.2 mm) |
0.276 in (7 mm) |
No |
0.276 in (7 mm) |
||||||||||||||||||||
Texas Instruments |
Analog To Digital Converter, Delta-Sigma |
Commercial |
Gull Wing |
48 |
QFP |
Square |
Plastic/Epoxy |
1 |
Yes |
50 MHz |
1 |
CMOS |
10 |
0.2441 % |
5 V |
2's Complement Binary |
Flatpack |
70 °C (158 °F) |
Parallel, Word |
0 °C (32 °F) |
Sample |
Quad |
S-PQFP-G48 |
No |
||||||||||||||||||||||||||
Texas Instruments |
Analog To Digital Converter, Proprietary Method |
Military |
Flat |
100 |
GQFF |
Square |
Ceramic, Metal-Sealed Cofired |
1 |
Yes |
2 V |
1000 MHz |
1 |
Bipolar |
12 |
0.109863 % |
3.3 V |
Offset Binary, 2's Complement Binary |
Flatpack, Guard Ring |
0.025 in (0.635 mm) |
125 °C (257 °F) |
-2 V |
Parallel, Word |
-55 °C (-67 °F) |
Track |
Quad |
S-CQFP-F100 |
0.105 in (2.67 mm) |
0.75 in (19.05 mm) |
0.75 in (19.05 mm) |
|||||||||||||||||||||
|
Texas Instruments |
Analog To Digital Converter, Proprietary Method |
Military |
Gull Wing |
48 |
HQFP |
Square |
100k Rad(Si) |
Ceramic, Metal-Sealed Cofired |
1 |
Yes |
2 V |
155 MHz |
1 |
CMOS |
14 |
350 mA |
0.0305 % |
3.3 V |
Offset Binary, 2's Complement Binary |
3.3 V |
Flatpack, Heat Sink/Slug |
QFL48,.45SQ,25 |
Analog to Digital Converters |
0.025 in (0.635 mm) |
125 °C (257 °F) |
-2 V |
Parallel, Word |
-55 °C (-67 °F) |
Sample |
Quad |
6.4 ns |
S-CQFP-G48 |
1 |
0.109 in (2.77 mm) |
0.453 in (11.5 mm) |
No |
Peak-to-peak input voltage range: 2 V |
0.453 in (11.5 mm) |
|||||||||||
Texas Instruments |
Analog To Digital Converter, Successive Approximation |
Industrial |
No Lead |
32 |
HVQCCN |
Square |
Plastic/Epoxy |
3 |
Yes |
10 V |
250 kHz |
1 |
CMOS |
16 |
0.0031 % |
5 V |
Binary, 2's Complement Binary |
Chip Carrier, Heat Sink/Slug, Very Thin Profile |
0.02 in (0.5 mm) |
85 °C (185 °F) |
-10 V |
Serial |
-40 °C (-40 °F) |
Sample |
Quad |
2.2 µs |
S-PQCC-N32 |
0.039 in (1 mm) |
0.197 in (5 mm) |
No |
0.197 in (5 mm) |
|||||||||||||||||||
Texas Instruments |
Analog To Digital Converter, Successive Approximation |
Military |
J Bend |
20 |
QCCJ |
Square |
Plastic/Epoxy |
11 |
Yes |
6.8 V |
25 kHz |
1 |
CMOS |
8 |
2 mA |
0.195 % |
5 V |
Binary |
5 V |
Chip Carrier |
LDCC20,.4SQ |
Analog to Digital Converters |
0.05 in (1.27 mm) |
125 °C (257 °F) |
-300 mV |
Serial |
-55 °C (-67 °F) |
Sample |
Quad |
20 µs |
S-PQCC-J20 |
0.18 in (4.57 mm) |
0.353 in (8.9662 mm) |
No |
0.353 in (8.9662 mm) |
|||||||||||||||
|
Texas Instruments |
Analog To Digital Converter, Successive Approximation |
Industrial |
Gull Wing |
8 |
TSSOP |
Square |
Plastic/Epoxy |
1 |
Yes |
5.5 V |
200 kHz |
1 |
CMOS |
14 |
3.5 mA |
0.0061 % |
5 V |
Binary |
5 V |
Small Outline, Thin Profile, Shrink Pitch |
TSSOP8,.19 |
Analog to Digital Converters |
4.5 V |
0.026 in (0.65 mm) |
85 °C (185 °F) |
-200 mV |
Serial |
-40 °C (-40 °F) |
Nickel Palladium Gold Silver |
Sample |
Dual |
2.67 µs |
S-PDSO-G8 |
1 |
0.043 in (1.1 mm) |
0.118 in (3 mm) |
No |
e4 |
30 s |
260 °C (500 °F) |
0.118 in (3 mm) |
||||||||
|
Texas Instruments |
Analog To Digital Converter, Successive Approximation |
Military |
No Lead |
20 |
QCCN |
Square |
Ceramic, Metal-Sealed Cofired |
8 |
Yes |
5.5 V |
200 kHz |
1 |
CMOS |
MIL-PRF-38535 Class Q |
12 |
2.4 mA |
0.0293 % |
3.3 V |
Binary |
3/5 V |
Chip Carrier |
LCC20,.35SQ |
Analog to Digital Converters |
3 V |
0.05 in (1.27 mm) |
125 °C (257 °F) |
0 mV |
Serial |
-55 °C (-67 °F) |
Sample |
Quad |
4.65 µs |
S-CQCC-N20 |
0.08 in (2.03 mm) |
0.35 in (8.89 mm) |
Yes |
0.35 in (8.89 mm) |
||||||||||||
Texas Instruments |
Analog To Digital Converter, Successive Approximation |
Industrial |
Gull Wing |
10 |
TSSOP |
Square |
Plastic/Epoxy |
4 |
Yes |
5.25 V |
200 kHz |
1 |
CMOS |
8 |
0.0781 % |
3 V |
Binary |
3/5 V |
Small Outline, Thin Profile, Shrink Pitch |
TSSOP10,.19,20 |
Analog to Digital Converters |
0.02 in (0.5 mm) |
85 °C (185 °F) |
0 mV |
Serial |
-40 °C (-40 °F) |
Tin Lead |
Track |
Dual |
16.25 µs |
S-PDSO-G10 |
1 |
0.043 in (1.09 mm) |
0.118 in (3 mm) |
No |
e0 |
260 °C (500 °F) |
0.118 in (3 mm) |
||||||||||||
|
Texas Instruments |
Analog To Digital Converter, Successive Approximation |
Industrial |
J Bend |
20 |
QCCJ |
Square |
Plastic/Epoxy |
11 |
Yes |
5.5 V |
40 kHz |
1 |
CMOS |
8 |
0.1953 % |
5 V |
Binary |
5 V |
Chip Carrier |
SOP20,.4 |
Analog to Digital Converters |
0.05 in (1.27 mm) |
85 °C (185 °F) |
0 mV |
Serial |
-40 °C (-40 °F) |
Matte Tin |
Sample |
Quad |
20 µs |
S-PQCC-J20 |
1 |
0.18 in (4.57 mm) |
0.353 in (8.965 mm) |
No |
e3 |
30 s |
260 °C (500 °F) |
0.353 in (8.965 mm) |
||||||||||
Texas Instruments |
Analog To Digital Converter, Successive Approximation |
Industrial |
J Bend |
28 |
QCCJ |
Square |
Plastic/Epoxy |
1 |
Yes |
5.5 V |
164 kHz |
1 |
CMOS |
10 |
0.0977 % |
5 V |
Binary |
Chip Carrier |
0.05 in (1.27 mm) |
85 °C (185 °F) |
0 mV |
Parallel, Word |
-40 °C (-40 °F) |
Nickel Palladium Gold |
Sample |
Quad |
6 µs |
S-PQCC-J28 |
0.18 in (4.57 mm) |
0.453 in (11.505 mm) |
No |
e4 |
0.453 in (11.505 mm) |
|||||||||||||||||
|
Texas Instruments |
Analog To Digital Converter, Proprietary Method |
Industrial |
No Lead |
48 |
HVQCCN |
Square |
Plastic/Epoxy |
2 |
Yes |
2 V |
125 MHz |
1 |
CMOS |
12 |
0.061 % |
3.3 V |
Binary, Offset Binary, 2's Complement Binary |
3.3 V |
Chip Carrier, Heat Sink/Slug, Very Thin Profile |
LCC48,.27SQ,20 |
Analog to Digital Converters |
0.02 in (0.5 mm) |
85 °C (185 °F) |
-2 V |
Parallel, Word |
-40 °C (-40 °F) |
Nickel Palladium Gold |
Sample |
Quad |
S-PQCC-N48 |
3 |
0.039 in (1 mm) |
0.276 in (7 mm) |
No |
e4 |
30 s |
260 °C (500 °F) |
0.276 in (7 mm) |
|||||||||||
|
Texas Instruments |
Analog To Digital Converter, Proprietary Method |
Industrial |
No Lead |
48 |
HVQCCN |
Square |
Plastic/Epoxy |
1 |
Yes |
2 V |
170 MHz |
1 |
CMOS |
14 |
0.0305 % |
3.3 V |
Binary, Offset Binary, 2's Complement Binary |
3.3 V |
Chip Carrier, Heat Sink/Slug, Very Thin Profile |
LCC48,.27SQ,20 |
Analog to Digital Converters |
0.02 in (0.5 mm) |
85 °C (185 °F) |
0 mV |
Parallel, Word |
-40 °C (-40 °F) |
Nickel Palladium Gold |
Sample |
Quad |
S-PQCC-N48 |
3 |
0.039 in (1 mm) |
0.276 in (7 mm) |
No |
e4 |
30 s |
260 °C (500 °F) |
0.276 in (7 mm) |
|||||||||||
|
Texas Instruments |
Analog To Digital Converter, Proprietary Method |
Industrial |
Gull Wing |
80 |
HTFQFP |
Square |
Plastic/Epoxy |
8 |
Yes |
2.03 V |
65 MHz |
1 |
CMOS |
12 |
0.061 % |
3.3 V |
Offset Binary |
3.3 V |
Flatpack, Heat Sink/Slug, Thin Profile, Fine Pitch |
TQFP80,.55SQ |
Analog to Digital Converters |
0.02 in (0.5 mm) |
85 °C (185 °F) |
0 mV |
Serial |
-40 °C (-40 °F) |
Nickel Palladium Gold |
Sample |
Quad |
S-PQFP-G80 |
3 |
0.047 in (1.2 mm) |
0.472 in (12 mm) |
No |
e4 |
30 s |
260 °C (500 °F) |
0.472 in (12 mm) |
|||||||||||
|
Texas Instruments |
Analog To Digital Converter, Successive Approximation |
Industrial |
Gull Wing |
48 |
TFQFP |
Square |
Plastic/Epoxy |
1 |
Yes |
4.2 V |
1.25 MHz |
1 |
Bipolar |
16 |
0.0031 % |
5 V |
2's Complement Binary |
3/5,5 V |
Flatpack, Thin Profile, Fine Pitch |
TQFP48,.35SQ |
Analog to Digital Converters |
0.02 in (0.5 mm) |
85 °C (185 °F) |
-2.5 V |
Parallel, 8 Bits, Parallel, Word |
-40 °C (-40 °F) |
Sample |
Quad |
650 µs |
S-PQFP-G48 |
0.047 in (1.2 mm) |
0.276 in (7 mm) |
No |
0.276 in (7 mm) |
|||||||||||||||
|
Texas Instruments |
Analog To Digital Converter, Proprietary Method |
Commercial |
Ball |
64 |
LFBGA |
Square |
Plastic/Epoxy |
16 |
Yes |
100 kHz |
1 |
16 |
0.0244 % |
5 V |
Binary, Offset Binary |
Grid Array, Low Profile, Fine Pitch |
0.031 in (0.8 mm) |
70 °C (158 °F) |
Serial, Parallel, Word |
0 °C (32 °F) |
Tin/Silver/Copper |
Bottom |
S-PBGA-B64 |
3 |
0.057 in (1.45 mm) |
0.315 in (8 mm) |
e1 |
30 s |
260 °C (500 °F) |
0.315 in (8 mm) |
|||||||||||||||||||
Texas Instruments |
Analog To Digital Converter, Proprietary Method |
Industrial |
Gull Wing |
48 |
TFQFP |
Square |
Plastic/Epoxy |
1 |
Yes |
80 MHz |
1 |
12 |
0.0244 % |
3.3 V |
Binary |
1.8,3.3 V |
Flatpack, Thin Profile, Fine Pitch |
TQFP48,.35SQ |
Analog to Digital Converters |
0.02 in (0.5 mm) |
85 °C (185 °F) |
Serial |
-40 °C (-40 °F) |
Sample |
Quad |
S-PQFP-G48 |
0.047 in (1.2 mm) |
0.276 in (7 mm) |
No |
0.276 in (7 mm) |
||||||||||||||||||||
|
Texas Instruments |
Analog To Digital Converter, Successive Approximation |
Industrial |
J Bend |
28 |
QCCJ |
Square |
Plastic/Epoxy |
1 |
Yes |
5.5 V |
164 kHz |
1 |
CMOS |
10 |
8 mA |
0.0977 % |
5 V |
Binary |
5 V |
Chip Carrier |
LDCC28,.5SQ |
Analog to Digital Converters |
4.75 V |
0.05 in (1.27 mm) |
85 °C (185 °F) |
0 mV |
Parallel, Word |
-40 °C (-40 °F) |
Nickel Palladium Gold |
Sample |
Quad |
6 µs |
S-PQCC-J28 |
1 |
0.18 in (4.57 mm) |
0.453 in (11.505 mm) |
No |
e4 |
30 s |
260 °C (500 °F) |
0.453 in (11.505 mm) |
||||||||
|
Texas Instruments |
Analog To Digital Converter, Successive Approximation |
Industrial |
Gull Wing |
48 |
TFQFP |
Square |
Plastic/Epoxy |
1 |
Yes |
2.6 V |
4 MHz |
1 |
CMOS |
12 |
0.0244 % |
5 V |
Binary |
Flatpack, Thin Profile, Fine Pitch |
2.7 V |
0.02 in (0.5 mm) |
85 °C (185 °F) |
0 mV |
Parallel, 8 Bits, Parallel, Word |
-40 °C (-40 °F) |
Nickel Palladium Gold |
Sample |
Quad |
205 ns |
S-PQFP-G48 |
2 |
0.047 in (1.2 mm) |
0.276 in (7 mm) |
No |
e4 |
30 s |
260 °C (500 °F) |
0.276 in (7 mm) |
||||||||||||
|
Texas Instruments |
Analog To Digital Converter, Proprietary Method |
Industrial |
No Lead |
64 |
HVQCCN |
Square |
Plastic/Epoxy |
2 |
Yes |
2 V |
105 MHz |
1 |
CMOS |
12 |
0.0488 % |
3.3 V |
Binary, Offset Binary, 2's Complement Binary |
1.8/3.3,3.3 V |
Chip Carrier, Heat Sink/Slug, Very Thin Profile |
LCC64,.35SQ,20 |
Analog to Digital Converters |
0.02 in (0.5 mm) |
85 °C (185 °F) |
-2 V |
Parallel, Word |
-40 °C (-40 °F) |
Nickel Palladium Gold |
Sample |
Quad |
S-PQCC-N64 |
3 |
0.039 in (1 mm) |
0.354 in (9 mm) |
No |
e4 |
30 s |
260 °C (500 °F) |
0.354 in (9 mm) |
|||||||||||
|
Texas Instruments |
Analog To Digital Converter, Successive Approximation |
Industrial |
Gull Wing |
48 |
TFQFP |
Square |
Plastic/Epoxy |
4 |
Yes |
2.55 V |
250 kHz |
1 |
CMOS |
16 |
0.0061 % |
5 V |
2's Complement Binary |
±5 V |
-5 V |
Flatpack, Thin Profile, Fine Pitch |
TQFP48,.35SQ |
Analog to Digital Converters |
0.02 in (0.5 mm) |
85 °C (185 °F) |
-2.55 V |
Parallel, Word |
-40 °C (-40 °F) |
Sample |
Quad |
34 µs |
S-PQFP-G48 |
0.047 in (1.2 mm) |
0.276 in (7 mm) |
No |
0.276 in (7 mm) |
||||||||||||||
|
Texas Instruments |
Analog To Digital Converter, Successive Approximation |
Industrial |
No Lead |
8 |
VSON |
Square |
Plastic/Epoxy |
1 |
Yes |
5 V |
100 kHz |
1 |
CMOS |
16 |
0.0061 % |
5 V |
Binary |
2.7/5 V |
Small Outline, Very Thin Profile |
SOLCC8,.12,25 |
Analog to Digital Converters |
0.026 in (0.65 mm) |
85 °C (185 °F) |
0 mV |
Serial |
-40 °C (-40 °F) |
Nickel Palladium Gold |
Sample |
Dual |
666.7 µs |
S-PDSO-N8 |
2 |
0.039 in (1 mm) |
0.118 in (3 mm) |
No |
e4 |
30 s |
260 °C (500 °F) |
0.118 in (3 mm) |
||||||||||
Texas Instruments |
Analog To Digital Converter, Successive Approximation |
Military |
J Bend |
20 |
QCCJ |
Square |
Plastic/Epoxy |
11 |
Yes |
6.8 V |
75 kHz |
1 |
CMOS |
8 |
3 mA |
0.195 % |
5 V |
Binary |
5 V |
Chip Carrier |
LDCC20,.4SQ |
Analog to Digital Converters |
0.05 in (1.27 mm) |
125 °C (257 °F) |
-300 mV |
Serial |
-55 °C (-67 °F) |
Sample |
Quad |
S-PQCC-J20 |
0.18 in (4.57 mm) |
0.353 in (8.9662 mm) |
No |
0.353 in (8.9662 mm) |
||||||||||||||||
|
Texas Instruments |
Analog To Digital Converter, Proprietary Method |
Industrial |
Gull Wing |
48 |
TFQFP |
Square |
Plastic/Epoxy |
1 |
Yes |
3.6 V |
3 MHz |
1 |
CMOS |
14 |
0.0153 % |
3.3 V |
Binary, 2's Complement Binary |
3.3 V |
Flatpack, Thin Profile, Fine Pitch |
TQFP48,.35SQ |
Analog to Digital Converters |
0.02 in (0.5 mm) |
85 °C (185 °F) |
-3.6 V |
Parallel, Word |
-40 °C (-40 °F) |
Nickel Palladium Gold |
Sample |
Quad |
S-PQFP-G48 |
2 |
0.047 in (1.2 mm) |
0.276 in (7 mm) |
No |
e4 |
30 s |
260 °C (500 °F) |
0.276 in (7 mm) |
|||||||||||
|
Texas Instruments |
Analog To Digital Converter, Flash Method |
Military |
No Lead |
64 |
VQCCN |
Square |
Plastic/Epoxy |
2 |
Yes |
2 V |
125 MHz |
1 |
14 |
0.0305 % |
1.8 V |
Offset Binary, 2's Complement Binary |
Chip Carrier, Very Thin Profile |
0.02 in (0.5 mm) |
125 °C (257 °F) |
-2 V |
Parallel, Word |
-55 °C (-67 °F) |
Nickel Palladium Gold |
Sample |
Quad |
S-PQCC-N64 |
3 |
0.039 in (1 mm) |
0.354 in (9 mm) |
Peak-to-peak input voltage range: 2 V |
e4 |
30 s |
260 °C (500 °F) |
0.354 in (9 mm) |
|||||||||||||||
Texas Instruments |
Analog To Digital Converter, Successive Approximation |
Industrial |
J Bend |
20 |
QCCJ |
Square |
Plastic/Epoxy |
11 |
Yes |
5.5 V |
66 kHz |
1 |
CMOS |
12 |
0.0244 % |
5 V |
Binary, 2's Complement Binary |
5 V |
Chip Carrier |
LCC20,.35SQ |
Analog to Digital Converters |
0.05 in (1.27 mm) |
85 °C (185 °F) |
0 mV |
Serial |
-40 °C (-40 °F) |
Sample |
Quad |
10 µs |
S-PQCC-J20 |
0.18 in (4.57 mm) |
0.353 in (8.965 mm) |
No |
0.353 in (8.965 mm) |
||||||||||||||||
Texas Instruments |
Analog To Digital Converter, Proprietary Method |
Industrial |
Gull Wing |
44 |
QFP |
Square |
Plastic/Epoxy |
1 |
Yes |
5.5 V |
216 kHz |
1 |
CMOS |
13 |
0.0122 % |
5 V |
2's Complement Binary |
5 V |
Flatpack |
QFP44,.5SQ,32 |
Analog to Digital Converters |
0.031 in (0.8 mm) |
85 °C (185 °F) |
0 mV |
Parallel, Word |
-40 °C (-40 °F) |
Tin Lead |
Sample |
Quad |
3.6 µs |
S-PQFP-G44 |
3 |
0.096 in (2.45 mm) |
0.394 in (10 mm) |
No |
e0 |
260 °C (500 °F) |
0.394 in (10 mm) |
||||||||||||
Texas Instruments |
Analog To Digital Converter, Proprietary Method |
Industrial |
No Lead |
60 |
HVQCCN |
Square |
2 |
Yes |
1.6 V |
80 MHz |
1 |
CMOS |
12 |
0.0293 % |
3 V |
Offset Binary, 2's Complement Binary |
Chip Carrier, Heat Sink/Slug, Very Thin Profile |
0.02 in (0.5 mm) |
85 °C (185 °F) |
1.4 V |
Parallel, Word |
-40 °C (-40 °F) |
Sample |
Quad |
12.5 ns |
S-XQCC-N60 |
0.031 in (0.8 mm) |
0.354 in (9 mm) |
0.354 in (9 mm) |
|||||||||||||||||||||
|
Texas Instruments |
Analog To Digital Converter, Proprietary Method |
Industrial |
No Lead |
48 |
HVQCCN |
Square |
Plastic/Epoxy |
1 |
Yes |
2 V |
210 MHz |
1 |
CMOS |
12 |
0.0488 % |
3.3 V |
2's Complement Binary |
3.3 V |
Chip Carrier, Heat Sink/Slug, Very Thin Profile |
LCC48,.27SQ,20 |
Analog to Digital Converters |
0.02 in (0.5 mm) |
85 °C (185 °F) |
-2 V |
Parallel, Word |
-40 °C (-40 °F) |
Nickel Palladium Gold |
Sample |
Quad |
S-PQCC-N48 |
3 |
0.039 in (1 mm) |
0.276 in (7 mm) |
No |
Peak-to-peak input voltage range: 2 V |
e4 |
30 s |
260 °C (500 °F) |
0.276 in (7 mm) |
||||||||||
|
Texas Instruments |
Analog To Digital Converter, Successive Approximation |
Industrial |
J Bend |
20 |
QCCJ |
Square |
Plastic/Epoxy |
11 |
Yes |
5.5 V |
40 kHz |
1 |
CMOS |
8 |
0.1953 % |
5 V |
Binary |
Chip Carrier |
0.05 in (1.27 mm) |
85 °C (185 °F) |
0 mV |
Serial |
-40 °C (-40 °F) |
Matte Tin |
Sample |
Quad |
20 µs |
S-PQCC-J20 |
1 |
0.18 in (4.57 mm) |
0.353 in (8.965 mm) |
No |
e3 |
30 s |
260 °C (500 °F) |
0.353 in (8.965 mm) |
|||||||||||||
|
Texas Instruments |
Analog To Digital Converter, Successive Approximation |
Automotive |
Gull Wing |
32 |
TFQFP |
Square |
Plastic/Epoxy |
2 |
Yes |
2.525 V |
2 MHz |
2 |
12 |
7.5 mA |
0.0305 % |
5 V |
2's Complement Binary |
5 V |
Flatpack, Thin Profile, Fine Pitch |
TQFP32,.28SQ |
Analog to Digital Converters |
2.7 V |
0.02 in (0.5 mm) |
125 °C (257 °F) |
-500 mV |
Parallel, Word |
-40 °C (-40 °F) |
Nickel/Palladium/Gold |
Sample |
Quad |
400 ns |
S-PQFP-G32 |
2 |
0.041 in (1.05 mm) |
0.197 in (5 mm) |
No |
e4 |
260 °C (500 °F) |
0.197 in (5 mm) |
Analog-to-digital converters (ADCs) are electronic devices that convert continuous analog signals into digital signals, which can be processed by digital circuits, microcontrollers, or computers. ADCs are essential components in many electronic systems, as they allow the measurement and processing of physical signals, such as temperature, pressure, light, and sound.
ADCs work by sampling the analog signal at regular intervals and quantizing the sampled signal into a series of digital values. The sampling rate and the resolution of the ADC determine the accuracy and the bandwidth of the digital signal. ADCs may also include features such as amplification, filtering, or signal conditioning, to improve the accuracy and stability of the digital signal.
ADCs can be classified based on their architecture and their application. The most common types of ADCs are successive approximation ADCs, delta-sigma ADCs, and pipeline ADCs. Each type has its advantages and limitations, depending on the application and the required performance.
ADCs are used in a wide range of applications, from consumer electronics, such as smartphones and digital cameras, to industrial automation, medical devices, and scientific instruments. They play a crucial role in the conversion of physical signals into digital signals, allowing the processing, storage, and transmission of data in electronic systems.
Overall, ADCs are essential components in many electronic systems, providing the necessary signal conversion for a wide range of applications. Their accuracy, speed, and resolution determine the performance and the functionality of many electronic devices and systems.