Industrial Analog-to-Digital Converters 2,400+

Reset All
Part RoHS Manufacturer Converter Type Temperature Grade Terminal Form No. of Terminals Package Code Package Shape Total Dose (V) Package Body Material No. of Analog In Channels Surface Mount Maximum Supply Voltage Maximum Analog Input Voltage Sample Rate No. of Functions Technology Screening Level Nominal Bandwidth No. of Bits Maximum Supply Current Maximum Linearity Error (EL) Nominal Supply Voltage Output Bit Code Power Supplies (V) Nominal Negative Supply Voltage Package Style (Meter) Package Equivalence Code Sub-Category Minimum Supply Voltage Terminal Pitch Maximum Operating Temperature Minimum Analog Input Voltage Output Format Minimum Operating Temperature Terminal Finish Sample and Hold/Track and Hold Terminal Position Maximum Conversion Time JESD-30 Code Moisture Sensitivity Level (MSL) Maximum Seated Height Width Qualification Additional Features JESD-609 Code Maximum Time At Peak Reflow Temperature (s) Peak Reflow Temperature (C) Length Input Bit Code

AD8275BRMZ-R7

Analog Devices

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

1

Yes

12 V

1

16

5 V

Binary

Small Outline, Thin Profile, Shrink Pitch

0.026 in (0.65 mm)

85 °C (185 °F)

-12.3 V

-40 °C (-40 °F)

Matte Tin

Dual

S-PDSO-G8

1

0.043 in (1.1 mm)

0.118 in (3 mm)

No

e3

30 s

260 °C (500 °F)

0.118 in (3 mm)

AD9633BCPZ-80

Analog Devices

Analog To Digital Converter, Flash Method

Industrial

No Lead

48

HVQCCN

Square

4

Yes

2 V

80 MHz

1

CMOS

12

0.0391 %

1.8 V

Offset Binary, 2's Complement Binary

1.8 V

Chip Carrier, Heat Sink/Slug, Very Thin Profile

LCC48,.27SQ,20

Analog to Digital Converters

0.02 in (0.5 mm)

85 °C (185 °F)

-2 V

Serial

-40 °C (-40 °F)

Matte Tin

Sample

Quad

12.5 ns

S-XQCC-N48

3

0.031 in (0.8 mm)

0.276 in (7 mm)

No

e3

30 s

260 °C (500 °F)

0.276 in (7 mm)

AD977AARS

Analog Devices

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

28

SSOP

Rectangular

Plastic/Epoxy

3

Yes

10 V

200 kHz

1

BICMOS

16

0.0046 %

5 V

Binary, 2's Complement Binary

5 V

Small Outline, Shrink Pitch

SSOP28,.3

Analog to Digital Converters

0.026 in (0.65 mm)

85 °C (185 °F)

-10 V

Serial

-40 °C (-40 °F)

Tin Lead

Dual

4 µs

R-PDSO-G28

1

0.079 in (2 mm)

0.209 in (5.3 mm)

No

e0

240 °C (464 °F)

0.402 in (10.2 mm)

ADC78H90CIMTX

Texas Instruments

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

16

TSSOP

Rectangular

Plastic/Epoxy

8

Yes

5.25 V

500 kHz

1

CMOS

12

0.0244 %

3 V

Binary

3/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP16,.25

Analog to Digital Converters

0.026 in (0.65 mm)

85 °C (185 °F)

0 mV

Serial

-40 °C (-40 °F)

Tin Lead

Track

Dual

1.625 µs

R-PDSO-G16

1

0.043 in (1.1 mm)

0.173 in (4.4 mm)

No

e0

260 °C (500 °F)

0.197 in (5 mm)

ADS1281IPWRG4

Texas Instruments

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

24

TSSOP

Rectangular

Plastic/Epoxy

1

Yes

1.25 V

1

24

0.0005 %

3.3 V

2's Complement Binary

±2.5,3.3 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP24,.25

Analog to Digital Converters

0.026 in (0.65 mm)

85 °C (185 °F)

-1.25 V

Serial

-40 °C (-40 °F)

Nickel Palladium Gold

Dual

R-PDSO-G24

1

0.047 in (1.2 mm)

0.173 in (4.4 mm)

No

e4

30 s

260 °C (500 °F)

0.307 in (7.8 mm)

ADS5400IPZPR

Texas Instruments

Analog To Digital Converter, Proprietary Method

Industrial

Gull Wing

100

HTFQFP

Square

Plastic/Epoxy

1

Yes

2 V

1000 MHz

1

Bipolar

12

242 mA

0.1099 %

3.3 V

Offset Binary, 2's Complement Binary

3.3,5 V

Flatpack, Heat Sink/Slug, Thin Profile, Fine Pitch

TQFP100,.63SQ

Analog to Digital Converters

0.02 in (0.5 mm)

85 °C (185 °F)

-2 V

Parallel, Word

-40 °C (-40 °F)

Nickel/Palladium/Gold

Track

Quad

S-PQFP-G100

3

0.047 in (1.2 mm)

0.551 in (14 mm)

No

Peak-to-peak input voltage range: 2 V

e4

260 °C (500 °F)

0.551 in (14 mm)

ADS8331IRGET

Texas Instruments

Analog To Digital Converter, Successive Approximation

Industrial

No Lead

24

HVQCCN

Square

Plastic/Epoxy

4

Yes

4.2 V

500 kHz

1

CMOS

16

500 μA

0.0046 %

5 V

Binary

2.7/5 V

Chip Carrier, Heat Sink/Slug, Very Thin Profile

LCC24,.16SQ,20

Analog to Digital Converters

1.65 V

0.02 in (0.5 mm)

85 °C (185 °F)

0 mV

Serial

-40 °C (-40 °F)

Nickel Palladium Gold

Sample

Quad

2 µs

S-PQCC-N24

2

0.039 in (1 mm)

0.157 in (4 mm)

No

e4

30 s

260 °C (500 °F)

0.157 in (4 mm)

LTC1861IMS#TRPBF

Analog Devices

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

10

TSSOP

Square

Plastic/Epoxy

2

Yes

5.25 V

250 kHz

1

12

0.0244 %

5 V

Binary

Small Outline, Thin Profile, Shrink Pitch

0.02 in (0.5 mm)

85 °C (185 °F)

0 mV

Serial

-40 °C (-40 °F)

Matte Tin

Sample

Dual

3.2 µs

S-PDSO-G10

1

0.043 in (1.1 mm)

0.118 in (3 mm)

No

e3

30 s

260 °C (500 °F)

0.118 in (3 mm)

MCP3301-BI/SN

Microchip Technology

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

2

Yes

5 V

100 kHz

1

TS 16949

13

450 μA

0.012207 %

5 V

2's Complement Binary

Small Outline

SOP8,.23

0.05 in (1.27 mm)

85 °C (185 °F)

-5 V

Serial

-40 °C (-40 °F)

Matte Tin

Sample

Dual

R-PDSO-G8

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e3

30 s

260 °C (500 °F)

0.193 in (4.9 mm)

TLV2556IPWRG4

Texas Instruments

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

20

TSSOP

Rectangular

Plastic/Epoxy

11

Yes

5.5 V

200 kHz

1

12

3 mA

0.0244 %

5 V

Binary, 2's Complement Binary

3/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP20,.25

Analog to Digital Converters

2.7 V

0.026 in (0.65 mm)

85 °C (185 °F)

0 mV

Serial

-40 °C (-40 °F)

Nickel Palladium Gold

Sample

Dual

5.54 µs

R-PDSO-G20

1

0.047 in (1.2 mm)

0.173 in (4.4 mm)

No

e4

30 s

260 °C (500 °F)

0.256 in (6.5 mm)

AD7654ASTZRL

Analog Devices

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

48

LFQFP

Square

Plastic/Epoxy

4

Yes

5 V

500 kHz

1

16

0.0053 %

5 V

Binary

3/5,5 V

Flatpack, Low Profile, Fine Pitch

QFP48,.35SQ,20

Analog to Digital Converters

0.02 in (0.5 mm)

85 °C (185 °F)

0 mV

Serial, Parallel, Word

-40 °C (-40 °F)

Matte Tin

Sample

Quad

875 ns

S-PQFP-G48

3

0.063 in (1.6 mm)

0.276 in (7 mm)

No

e3

30 s

260 °C (500 °F)

0.276 in (7 mm)

AD7894ARZ-3

Analog Devices

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

1

Yes

2.5 V

11 kHz

1

CMOS

14

0.0122 %

5 V

2's Complement Binary

5 V

Small Outline

SOP8,.25

Analog to Digital Converters

0.05 in (1.27 mm)

85 °C (185 °F)

-2.5 V

Serial

-40 °C (-40 °F)

Matte Tin

Track

Dual

5 µs

R-PDSO-G8

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e3

30 s

260 °C (500 °F)

0.193 in (4.9 mm)

AD9650BCPZ-65

Analog Devices

Analog To Digital Converter, Flash Method

Industrial

No Lead

64

HVQCCN

Square

2

Yes

2.7 V

65 MHz

1

CMOS

16

0.0076 %

1.8 V

Offset Binary, 2's Complement Binary, Gray Code

1.8 V

Chip Carrier, Heat Sink/Slug, Very Thin Profile

LCC64,.35SQ,20

Analog to Digital Converters

0.02 in (0.5 mm)

85 °C (185 °F)

-2.7 V

Parallel, Word

-40 °C (-40 °F)

Matte Tin

Sample

Quad

50 ns

S-XQCC-N64

3

0.039 in (1 mm)

0.354 in (9 mm)

No

e3

30 s

260 °C (500 °F)

0.354 in (9 mm)

ADC78H90CIMT

Texas Instruments

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

16

TSSOP

Rectangular

Plastic/Epoxy

8

Yes

5.25 V

500 kHz

1

CMOS

12

0.0244 %

3 V

Binary

3/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP16,.25

Analog to Digital Converters

0.026 in (0.65 mm)

85 °C (185 °F)

0 mV

Serial

-40 °C (-40 °F)

Tin Lead

Track

Dual

1.625 µs

R-PDSO-G16

1

0.043 in (1.1 mm)

0.173 in (4.4 mm)

No

e0

260 °C (500 °F)

0.197 in (5 mm)

ADS5294IPFPR

Texas Instruments

Analog To Digital Converter, Proprietary Method

Industrial

Gull Wing

80

HTFQFP

Square

Plastic/Epoxy

8

Yes

2 V

80 MHz

1

CMOS

14

0.0336 %

1.8 V

Offset Binary, 2's Complement Binary

1.8 V

Flatpack, Heat Sink/Slug, Thin Profile, Fine Pitch

TQFP80,.55SQ

Analog to Digital Converters

0.02 in (0.5 mm)

85 °C (185 °F)

-2 V

Serial

-40 °C (-40 °F)

Nickel Palladium Gold

Sample

Quad

12.5 ns

S-PQFP-G80

3

0.047 in (1.2 mm)

0.472 in (12 mm)

No

Peak-to-peak input voltage range: 2 V

e4

30 s

260 °C (500 °F)

0.472 in (12 mm)

ADS8318IDGST

Texas Instruments

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

10

TSSOP

Square

Plastic/Epoxy

1

Yes

5.5 V

500 kHz

1

16

4.5 mA

0.0023 %

5 V

Binary

3.3,5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP10,.19,20

Analog to Digital Converters

2.375 V

0.02 in (0.5 mm)

85 °C (185 °F)

-2.048 V

Serial

-40 °C (-40 °F)

Matte Tin

Sample

Dual

1.4 µs

S-PDSO-G10

2

0.043 in (1.1 mm)

0.118 in (3 mm)

No

e3

30 s

260 °C (500 °F)

0.118 in (3 mm)

ADS8345NBG4

Texas Instruments

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

20

SSOP

Rectangular

Plastic/Epoxy

8

Yes

2.5 V

100 kHz

1

CMOS

16

0.0092 %

5 V

2's Complement Binary

2.7/5 V

Small Outline, Shrink Pitch

SSOP20,.3

Analog to Digital Converters

0.026 in (0.65 mm)

85 °C (185 °F)

-2.5 V

Serial

-40 °C (-40 °F)

Nickel Palladium Gold

Sample

Dual

6.66 µs

R-PDSO-G20

2

0.079 in (2 mm)

0.209 in (5.3 mm)

No

e4

30 s

260 °C (500 °F)

0.283 in (7.2 mm)

ADS8862IDGS

Texas Instruments

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

10

TSSOP

Square

Plastic/Epoxy

1

Yes

5 V

680 kHz

1

16

1.8 mA

0.0031 %

3 V

Binary

3 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP10,.19,20

Analog to Digital Converters

1.65 V

0.02 in (0.5 mm)

85 °C (185 °F)

0 mV

Serial

-40 °C (-40 °F)

Nickel Palladium Gold

Sample

Dual

930 ns

S-PDSO-G10

2

0.043 in (1.1 mm)

0.118 in (3 mm)

No

e4

30 s

260 °C (500 °F)

0.118 in (3 mm)

LTC2170IUKG-14#PBF

Analog Devices

Analog To Digital Converter, Proprietary Method

Industrial

No Lead

52

HVQCCN

Rectangular

Plastic/Epoxy

4

Yes

2 V

25 MHz

1

CMOS

14

0.0168 %

1.8 V

Offset Binary, 2's Complement Binary

Chip Carrier, Heat Sink/Slug, Very Thin Profile

0.02 in (0.5 mm)

85 °C (185 °F)

-2 V

Serial

-40 °C (-40 °F)

Matte Tin - annealed

Sample

Quad

R-PQCC-N52

1

0.031 in (0.8 mm)

0.276 in (7 mm)

No

e3

30 s

260 °C (500 °F)

0.315 in (8 mm)

LTC2433-1IMS#TR

Analog Devices

Analog To Digital Converter, Delta-Sigma

Industrial

Gull Wing

10

TSSOP

Square

Plastic/Epoxy

1

Yes

5.8 V

1

16

0.0019 %

5 V

Binary

Small Outline, Thin Profile, Shrink Pitch

0.02 in (0.5 mm)

85 °C (185 °F)

-300 mV

Serial

-40 °C (-40 °F)

Tin Lead

Dual

149.6 ms

S-PDSO-G10

1

0.043 in (1.1 mm)

0.118 in (3 mm)

No

e0

0.118 in (3 mm)

LTC2495IUHF#PBF

Analog Devices

Analog To Digital Converter, Delta-Sigma

Industrial

No Lead

38

HVQCCN

Rectangular

Plastic/Epoxy

16

Yes

1

16

5 V

Binary, 2's Complement Binary

Chip Carrier, Heat Sink/Slug, Very Thin Profile

0.02 in (0.5 mm)

85 °C (185 °F)

Serial

-40 °C (-40 °F)

Matte Tin

Sample

Quad

81.9 ms

R-PQCC-N38

1

0.031 in (0.8 mm)

0.197 in (5 mm)

No

e3

30 s

260 °C (500 °F)

0.276 in (7 mm)

MAX11647EUA+

Analog Devices

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

2

Yes

2.128 V

1 MHz

1

BICMOS

10

0.0977 %

3 V

Binary, 2's Complement Binary

3/3.3 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.19

Analog to Digital Converters

0.026 in (0.65 mm)

85 °C (185 °F)

0 mV

Serial

-40 °C (-40 °F)

Nickel Palladium Gold

Track

Dual

6.8 µs

S-PDSO-G8

1

0.043 in (1.1 mm)

0.118 in (3 mm)

No

e4

30 s

260 °C (500 °F)

0.118 in (3 mm)

TLC549IDRG4

Texas Instruments

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

1

Yes

6 V

40 kHz

1

CMOS

8

0.1953 %

5 V

Binary

Small Outline

0.05 in (1.27 mm)

85 °C (185 °F)

0 mV

Serial

-40 °C (-40 °F)

Nickel Palladium Gold

Sample

Dual

17 µs

R-PDSO-G8

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e4

30 s

260 °C (500 °F)

0.193 in (4.9 mm)

ACPL-796J-000E

Broadcom

Analog To Digital Converter, Delta-Sigma

Industrial

Gull Wing

16

SOP

Rectangular

Plastic/Epoxy

1

Yes

320 mV

1

16

0.0229 %

5 V

Binary

Small Outline

0.05 in (1.27 mm)

105 °C (221 °F)

-320 mV

Serial

-40 °C (-40 °F)

Tin

Dual

R-PDSO-G16

1

0.154 in (3.9 mm)

0.295 in (7.493 mm)

No

e3

260 °C (500 °F)

0.406 in (10.312 mm)

AD7607BSTZ

Analog Devices

Analog To Digital Converter, Proprietary Method

Industrial

Gull Wing

64

LFQFP

Square

Plastic/Epoxy

8

Yes

10 V

200 kHz

1

14

0.0031 %

5 V

2's Complement Binary

2.5/5,5 V

Flatpack, Low Profile, Fine Pitch

QFP64,.47SQ,20

Analog to Digital Converters

0.02 in (0.5 mm)

85 °C (185 °F)

-10 V

Serial, Parallel, Word

-40 °C (-40 °F)

Matte Tin

Track

Quad

4 µs

S-PQFP-G64

3

0.063 in (1.6 mm)

0.394 in (10 mm)

No

e3

30 s

260 °C (500 °F)

0.394 in (10 mm)

AD7656ABSTZ

Analog Devices

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

64

LFQFP

Square

Plastic/Epoxy

6

Yes

12 V

250 kHz

1

CMOS

16

0.0046 %

5 V

2's Complement Binary

Flatpack, Low Profile, Fine Pitch

0.02 in (0.5 mm)

85 °C (185 °F)

-10 V

Serial, Parallel, Word

-40 °C (-40 °F)

Matte Tin

Track

Quad

3.1 µs

S-PQFP-G64

3

0.063 in (1.6 mm)

0.394 in (10 mm)

e3

30 s

260 °C (500 °F)

0.394 in (10 mm)

AD7705BRZ

Analog Devices

Analog To Digital Converter, Delta-Sigma

Industrial

Gull Wing

16

SOP

Rectangular

Plastic/Epoxy

2

Yes

2.5 V

19.2 kHz

1

CMOS

16

0.003 %

3 V

Binary, Offset Binary

3/5 V

Small Outline

SOP16,.4

Other Converters

0.05 in (1.27 mm)

85 °C (185 °F)

-2.5 V

Serial

-40 °C (-40 °F)

Matte Tin

Dual

R-PDSO-G16

1

0.104 in (2.65 mm)

0.295 in (7.5 mm)

No

e3

30 s

260 °C (500 °F)

0.406 in (10.3 mm)

AD7888ARZ-REEL

Analog Devices

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

16

SOP

Rectangular

Plastic/Epoxy

8

Yes

5.25 V

125 kHz

1

CMOS

12

0.0488 %

Binary

3/5 V

Small Outline

SOP16,.25

Analog to Digital Converters

0.05 in (1.27 mm)

105 °C (221 °F)

0 mV

Serial

-40 °C (-40 °F)

Matte Tin

Track

Dual

7.25 µs

R-PDSO-G16

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e3

260 °C (500 °F)

0.39 in (9.9 mm)

AD7892ARZ-1

Analog Devices

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

24

SOP

Rectangular

Plastic/Epoxy

1

Yes

10 V

500 kHz

1

CMOS

12

0.0366 %

5 V

2's Complement Binary

5 V

Small Outline

SOP24,.4

Analog to Digital Converters

0.05 in (1.27 mm)

85 °C (185 °F)

-10 V

Serial, Parallel, Word

-40 °C (-40 °F)

Matte Tin

Track

Dual

1.6 µs

R-PDSO-G24

1

0.104 in (2.65 mm)

0.295 in (7.5 mm)

No

e3

260 °C (500 °F)

0.606 in (15.4 mm)

ADC121S021CIMF/NOPB

Texas Instruments

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

6

LSSOP

Rectangular

Plastic/Epoxy

1

Yes

5.25 V

200 kHz

1

CMOS

12

2.8 mA

0.0244 %

3 V

Binary

3/5 V

Small Outline, Low Profile, Shrink Pitch

TSOP6,.11,37

Analog to Digital Converters

2.7 V

0.037 in (0.95 mm)

85 °C (185 °F)

0 mV

Serial

-40 °C (-40 °F)

Matte Tin

Track

Dual

R-PDSO-G6

1

0.057 in (1.45 mm)

0.063 in (1.6 mm)

No

e3

30 s

260 °C (500 °F)

0.114 in (2.9 mm)

ADS1242IPWTG4

Texas Instruments

Analog To Digital Converter, Delta-Sigma

Industrial

Gull Wing

16

TSSOP

Rectangular

Plastic/Epoxy

4

Yes

1.25 V

1

CMOS

24

0.0015 %

3 V

Binary

3/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP16,.25

Other Converters

0.026 in (0.65 mm)

85 °C (185 °F)

0 mV

Serial

-40 °C (-40 °F)

Nickel Palladium Gold

Dual

R-PDSO-G16

1

0.047 in (1.2 mm)

0.173 in (4.4 mm)

No

e4

30 s

260 °C (500 °F)

0.197 in (5 mm)

ADS1250U

Texas Instruments

Analog To Digital Converter, Delta-Sigma

Industrial

Gull Wing

16

SOP

Rectangular

Plastic/Epoxy

1

Yes

4.196 V

25 kHz

1

CMOS

20

0.002 %

5 V

2's Complement Binary

5 V

Small Outline

SOP16,.4

Analog to Digital Converters

4.75 V

0.05 in (1.27 mm)

85 °C (185 °F)

-4.096 V

Serial

-40 °C (-40 °F)

Nickel Palladium Gold

Sample

Dual

R-PDSO-G16

2

0.104 in (2.65 mm)

0.295 in (7.5 mm)

No

e4

30 s

260 °C (500 °F)

0.406 in (10.3 mm)

ADS7816UB/2K5G4

Texas Instruments

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

1

Yes

5 V

200 kHz

1

CMOS

12

0.0488 %

5 V

Binary

5 V

Small Outline

SOP8,.25

Analog to Digital Converters

0.05 in (1.27 mm)

85 °C (185 °F)

0 mV

Serial

-40 °C (-40 °F)

Nickel Palladium Gold

Sample

Dual

3.75 µs

R-PDSO-G8

2

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e4

30 s

260 °C (500 °F)

0.193 in (4.9 mm)

ADS8319IDGST

Texas Instruments

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

10

TSSOP

Square

Plastic/Epoxy

1

Yes

5.5 V

500 kHz

1

16

4.5 mA

0.0038 %

5 V

Binary

3.3,5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP10,.19,20

Analog to Digital Converters

2.375 V

0.02 in (0.5 mm)

85 °C (185 °F)

0 mV

Serial

-40 °C (-40 °F)

Matte Tin

Sample

Dual

1.4 µs

S-PDSO-G10

2

0.043 in (1.1 mm)

0.118 in (3 mm)

No

e3

30 s

260 °C (500 °F)

0.118 in (3 mm)

ADS8860IDRCR

Texas Instruments

Analog To Digital Converter, Successive Approximation

Industrial

No Lead

10

HVSON

Square

Plastic/Epoxy

1

Yes

5 V

1 MHz

1

16

2.4 mA

0.0031 %

3 V

Binary

3 V

Small Outline, Heat Sink/Slug, Very Thin Profile

SOLCC10,.12,20

Analog to Digital Converters

1.65 V

0.02 in (0.5 mm)

85 °C (185 °F)

0 mV

Serial

-40 °C (-40 °F)

Nickel Palladium Gold

Sample

Dual

710 ns

S-PDSO-N10

2

0.039 in (1 mm)

0.118 in (3 mm)

No

e4

30 s

260 °C (500 °F)

0.118 in (3 mm)

LTC2487IDE#TRPBF

Analog Devices

Analog To Digital Converter, Delta-Sigma

Industrial

No Lead

14

HVSON

Rectangular

Plastic/Epoxy

4

Yes

5.5 V

1

16

0.002 %

5 V

2's Complement Binary

Small Outline, Heat Sink/Slug, Very Thin Profile

0.02 in (0.5 mm)

85 °C (185 °F)

0 mV

Parallel, Word

-40 °C (-40 °F)

Matte Tin

Dual

163.5 ms

R-PDSO-N14

1

0.031 in (0.8 mm)

0.118 in (3 mm)

No

e3

30 s

260 °C (500 °F)

0.157 in (4 mm)

MAX1300BEUG

Maxim Integrated

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

24

TSSOP

Rectangular

Plastic/Epoxy

8

Yes

24.576 V

115 kHz

1

BICMOS

16

0.0061 %

5 V

Offset Binary

5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP24,.25

Analog to Digital Converters

0.026 in (0.65 mm)

85 °C (185 °F)

-24.576 V

Serial

-40 °C (-40 °F)

Tin Lead

Track

Dual

9.4 µs

R-PDSO-G24

1

0.043 in (1.1 mm)

0.173 in (4.4 mm)

No

e0

245 °C (473 °F)

0.307 in (7.8 mm)

MAX1300BEUG+

Analog Devices

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

24

TSSOP

Rectangular

Plastic/Epoxy

8

Yes

24.576 V

115 kHz

1

BICMOS

16

0.0061 %

5 V

Offset Binary

5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP24,.25

Analog to Digital Converters

0.026 in (0.65 mm)

85 °C (185 °F)

-24.576 V

Serial

-40 °C (-40 °F)

Matte Tin - annealed

Track

Dual

9.4 µs

R-PDSO-G24

1

0.043 in (1.1 mm)

0.173 in (4.4 mm)

No

e3

30 s

260 °C (500 °F)

0.307 in (7.8 mm)

AD7674ASTZ

Analog Devices

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

48

LFQFP

Square

Plastic/Epoxy

1

Yes

4.15 V

800 kHz

1

CMOS

18

0.001 %

5 V

Binary, 2's Complement Binary

3/5,5 V

Flatpack, Low Profile, Fine Pitch

QFP48,.35SQ,20

Analog to Digital Converters

0.02 in (0.5 mm)

85 °C (185 °F)

-4.05 V

Serial, Parallel, Word

-40 °C (-40 °F)

Matte Tin

Sample

Quad

1 ms

S-PQFP-G48

3

0.063 in (1.6 mm)

0.276 in (7 mm)

No

e3

30 s

260 °C (500 °F)

0.276 in (7 mm)

AD7785BRUZ-REEL

Analog Devices

Analog To Digital Converter, Delta-Sigma

Industrial

Gull Wing

16

TSSOP

Rectangular

Plastic/Epoxy

3

Yes

5.25 V

1

20

3 V

Offset Binary

3/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP16,.25

Other Converters

0.026 in (0.65 mm)

105 °C (221 °F)

Serial

-40 °C (-40 °F)

Matte Tin

Dual

R-PDSO-G16

1

0.047 in (1.2 mm)

0.173 in (4.4 mm)

No

e3

30 s

260 °C (500 °F)

0.197 in (5 mm)

ADS1100A1IDBVT

Texas Instruments

Analog To Digital Converter, Delta-Sigma

Industrial

Gull Wing

6

LSSOP

Rectangular

Plastic/Epoxy

1

Yes

5.5 V

128 Hz

1

16

150 μA

0.0125 %

5 V

2's Complement Binary

5 V

Small Outline, Low Profile, Shrink Pitch

TSOP6,.11,37

Analog to Digital Converters

2.7 V

0.037 in (0.95 mm)

85 °C (185 °F)

-2.5 V

Serial

-40 °C (-40 °F)

Nickel Palladium Gold

Dual

5.43478 ms

R-PDSO-G6

1

0.057 in (1.45 mm)

0.063 in (1.6 mm)

No

e4

30 s

260 °C (500 °F)

0.114 in (2.9 mm)

ADS1250UG4

Texas Instruments

Analog To Digital Converter, Delta-Sigma

Industrial

Gull Wing

16

SOP

Rectangular

Plastic/Epoxy

1

Yes

4.096 V

25 kHz

1

20

0.002 %

5 V

2's Complement Binary

5 V

Small Outline

SOP16,.4

Analog to Digital Converters

0.05 in (1.27 mm)

85 °C (185 °F)

-4.096 V

Serial

-40 °C (-40 °F)

Nickel Palladium Gold

Sample

Dual

R-PDSO-G16

2

0.104 in (2.65 mm)

0.295 in (7.5 mm)

No

e4

30 s

260 °C (500 °F)

0.406 in (10.3 mm)

ADS7843E/2K5

Texas Instruments

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

16

SSOP

Rectangular

Plastic/Epoxy

4

Yes

5 V

125 kHz

1

CMOS

12

650 μA

0.0488 %

2.7 V

Binary

2.7 V

Small Outline, Shrink Pitch

SSOP16,.25

Analog to Digital Converters

0.025 in (0.635 mm)

85 °C (185 °F)

0 mV

Serial

-40 °C (-40 °F)

Nickel Palladium Gold

Sample

Dual

6 µs

R-PDSO-G16

2

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e4

30 s

260 °C (500 °F)

0.193 in (4.89 mm)

ADS8329IBRSATG4

Texas Instruments

Analog To Digital Converter, Successive Approximation

Industrial

No Lead

16

HVQCCN

Square

Plastic/Epoxy

1

Yes

5 V

1 MHz

1

CMOS

16

6.1 mA

0.0027 %

5 V

Binary

3.3,5 V

Chip Carrier, Heat Sink/Slug, Very Thin Profile

LCC16,.16SQ,25

Analog to Digital Converters

1.65 V

0.026 in (0.65 mm)

85 °C (185 °F)

0 mV

Serial

-40 °C (-40 °F)

Nickel/Palladium/Gold

Sample

Quad

786 ns

S-PQCC-N16

2

0.039 in (1 mm)

0.157 in (4 mm)

No

e4

260 °C (500 °F)

0.157 in (4 mm)

CS5343-CZZ

Cirrus Logic

Analog To Digital Converter, Delta-Sigma

Industrial

Gull Wing

10

TSSOP

Square

Plastic/Epoxy

2

Yes

1.8975 V

108 kHz

1

24

3.3 V

2's Complement Binary

3.3/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP10,.19,20

Analog to Digital Converters

0.02 in (0.5 mm)

85 °C (185 °F)

1.848 V

Serial

-40 °C (-40 °F)

Matte Tin

Dual

S-PDSO-G10

2

0.043 in (1.1 mm)

0.118 in (3 mm)

No

e3

260 °C (500 °F)

0.118 in (3 mm)

LTC1864AIMS8#PBF

Analog Devices

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

1

Yes

5.25 V

250 kHz

1

16

0.0092 %

5 V

Binary

Small Outline, Thin Profile, Shrink Pitch

0.026 in (0.65 mm)

85 °C (185 °F)

0 mV

Serial

-40 °C (-40 °F)

Matte Tin

Sample

Dual

3.2 µs

S-PDSO-G8

1

0.043 in (1.1 mm)

0.118 in (3 mm)

No

e3

30 s

260 °C (500 °F)

0.118 in (3 mm)

LTC2433-1IMS

Analog Devices

Analog To Digital Converter, Delta-Sigma

Industrial

Gull Wing

10

TSSOP

Square

Plastic/Epoxy

1

Yes

5.8 V

1

16

0.0019 %

5 V

Binary

Small Outline, Thin Profile, Shrink Pitch

0.02 in (0.5 mm)

85 °C (185 °F)

-300 mV

Serial

-40 °C (-40 °F)

Tin/Lead

Dual

149.6 ms

S-PDSO-G10

1

0.043 in (1.1 mm)

0.118 in (3 mm)

No

e0

0.118 in (3 mm)

LTC2439-1IGN#TRPBF

Analog Devices

Analog To Digital Converter, Delta-Sigma

Industrial

Gull Wing

28

SSOP

Rectangular

Plastic/Epoxy

16

Yes

2.75 V

1

16

0.0019 %

5 V

Binary

Small Outline, Shrink Pitch

0.025 in (0.635 mm)

85 °C (185 °F)

-2.75 V

Serial

-40 °C (-40 °F)

Matte Tin

Dual

149.6 ms

R-PDSO-G28

1

0.069 in (1.748 mm)

0.154 in (3.899 mm)

No

e3

30 s

260 °C (500 °F)

0.389 in (9.893 mm)

Analog-to-Digital Converters

Analog-to-digital converters (ADCs) are electronic devices that convert continuous analog signals into digital signals, which can be processed by digital circuits, microcontrollers, or computers. ADCs are essential components in many electronic systems, as they allow the measurement and processing of physical signals, such as temperature, pressure, light, and sound.

ADCs work by sampling the analog signal at regular intervals and quantizing the sampled signal into a series of digital values. The sampling rate and the resolution of the ADC determine the accuracy and the bandwidth of the digital signal. ADCs may also include features such as amplification, filtering, or signal conditioning, to improve the accuracy and stability of the digital signal.

ADCs can be classified based on their architecture and their application. The most common types of ADCs are successive approximation ADCs, delta-sigma ADCs, and pipeline ADCs. Each type has its advantages and limitations, depending on the application and the required performance.

ADCs are used in a wide range of applications, from consumer electronics, such as smartphones and digital cameras, to industrial automation, medical devices, and scientific instruments. They play a crucial role in the conversion of physical signals into digital signals, allowing the processing, storage, and transmission of data in electronic systems.

Overall, ADCs are essential components in many electronic systems, providing the necessary signal conversion for a wide range of applications. Their accuracy, speed, and resolution determine the performance and the functionality of many electronic devices and systems.