Maxim Integrated Analog-to-Digital Converters 2,400+

Reset All
Part RoHS Manufacturer Converter Type Temperature Grade Terminal Form No. of Terminals Package Code Package Shape Total Dose (V) Package Body Material No. of Analog In Channels Surface Mount Maximum Supply Voltage Maximum Analog Input Voltage Sample Rate No. of Functions Technology Screening Level Nominal Bandwidth No. of Bits Maximum Supply Current Maximum Linearity Error (EL) Nominal Supply Voltage Output Bit Code Power Supplies (V) Nominal Negative Supply Voltage Package Style (Meter) Package Equivalence Code Sub-Category Minimum Supply Voltage Terminal Pitch Maximum Operating Temperature Minimum Analog Input Voltage Output Format Minimum Operating Temperature Terminal Finish Sample and Hold/Track and Hold Terminal Position Maximum Conversion Time JESD-30 Code Moisture Sensitivity Level (MSL) Maximum Seated Height Width Qualification Additional Features JESD-609 Code Maximum Time At Peak Reflow Temperature (s) Peak Reflow Temperature (C) Length Input Bit Code

MAX186DCAP

Maxim Integrated

Analog To Digital Converter, Successive Approximation

Commercial

Gull Wing

20

SSOP

Rectangular

Plastic/Epoxy

8

Yes

2.048 V

133 kHz

1

CMOS

12

2.5 mA

0.0244 %

5 V

Binary, 2's Complement Binary

5/±5 V

-5 V

Small Outline, Shrink Pitch

SSOP20,.3

Analog to Digital Converters

0.026 in (0.65 mm)

70 °C (158 °F)

-2.048 V

Serial

0 °C (32 °F)

Tin Lead

Track

Dual

10 µs

R-PDSO-G20

1

0.078 in (1.99 mm)

0.208 in (5.29 mm)

No

e0

20 s

240 °C (464 °F)

0.283 in (7.2 mm)

MAX186DCWP

Maxim Integrated

Analog To Digital Converter, Successive Approximation

Commercial

Gull Wing

20

SOP

Rectangular

Plastic/Epoxy

8

Yes

2.048 V

133 kHz

1

CMOS

12

2.5 mA

0.0244 %

5 V

Binary, 2's Complement Binary

5/±5 V

-5 V

Small Outline

SOP20,.4

Analog to Digital Converters

0.05 in (1.27 mm)

70 °C (158 °F)

-2.048 V

Serial

0 °C (32 °F)

Tin Lead

Track

Dual

10 µs

R-PDSO-G20

1

0.104 in (2.65 mm)

0.295 in (7.5 mm)

No

e0

245 °C (473 °F)

0.504 in (12.8 mm)

MAX195BCWE

Maxim Integrated

Analog To Digital Converter, Successive Approximation

Commercial

Gull Wing

16

SOP

Rectangular

Plastic/Epoxy

1

Yes

5 V

85 kHz

1

CMOS

16

0.004 %

5 V

Binary, Offset Binary

±5 V

-5 V

Small Outline

SOP16,.3

Analog to Digital Converters

0.05 in (1.27 mm)

70 °C (158 °F)

-5 V

Serial

0 °C (32 °F)

Tin Lead

Track

Dual

2 µs

R-PDSO-G16

1

0.104 in (2.65 mm)

0.295 in (7.5 mm)

No

e0

20 s

240 °C (464 °F)

0.406 in (10.3 mm)

MX574AJEWI

Maxim Integrated

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

28

SOP

Rectangular

Plastic/Epoxy

1

Yes

10 V

1

BICMOS

12

0.012 %

15 V

Binary, Offset Binary

5,±12/±15 V

-15 V

Small Outline

SOP28,.4

Analog to Digital Converters

0.05 in (1.27 mm)

85 °C (185 °F)

-10 V

Parallel, Word

-40 °C (-40 °F)

Tin/Lead

Dual

25 µs

R-PDSO-G28

1

0.104 in (2.65 mm)

0.295 in (7.5 mm)

No

e0

0.705 in (17.9 mm)

ICL7106CPL

Maxim Integrated

Analog To Digital Converter, Dual-Slope

Commercial

Through-Hole

40

DIP

Rectangular

Plastic/Epoxy

1

No

2 V

1

CMOS

3

0.05 %

9 V

Binary

9 V

In-Line

DIP40,.6

Analog to Digital Converters

0.1 in (2.54 mm)

70 °C (158 °F)

Parallel, Word

0 °C (32 °F)

Tin Lead

Dual

R-PDIP-T40

1

0.2 in (5.08 mm)

0.6 in (15.24 mm)

No

e0

245 °C (473 °F)

2.05 in (52.075 mm)

MAX1031BEEG

Maxim Integrated

Analog To Digital Converter

Industrial

Gull Wing

24

SSOP

Rectangular

Plastic/Epoxy

16

Yes

1.825 V

300 kHz

1

BICMOS

10

0.0977 %

2's Complement Binary

3/3.3 V

Small Outline, Shrink Pitch

SSOP24,.24

Analog to Digital Converters

0.025 in (0.635 mm)

85 °C (185 °F)

-500 mV

Serial

-40 °C (-40 °F)

Tin Lead

Track

Dual

R-PDSO-G24

1

0.069 in (1.75 mm)

0.153 in (3.89 mm)

No

e0

20 s

240 °C (464 °F)

0.34 in (8.64 mm)

MAX1137EUA

Maxim Integrated

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

4

Yes

1.024 V

94.4 kHz

1

BICMOS

10

0.0977 %

5 V

Binary, 2's Complement Binary

3/3.3 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.19

Analog to Digital Converters

0.026 in (0.65 mm)

85 °C (185 °F)

-1.024 V

Serial

-40 °C (-40 °F)

Nickel Palladium Gold

Track

Dual

6.8 µs

S-PDSO-G8

1

0.043 in (1.1 mm)

0.118 in (3 mm)

No

e4

245 °C (473 °F)

0.118 in (3 mm)

MAX1137EUA-T

Maxim Integrated

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

4

Yes

1.024 V

94.4 kHz

1

BICMOS

10

0.0977 %

5 V

Binary, 2's Complement Binary

3/3.3 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.19

Analog to Digital Converters

0.026 in (0.65 mm)

85 °C (185 °F)

-1.024 V

Serial

-40 °C (-40 °F)

Nickel Palladium Gold

Track

Dual

6.8 µs

S-PDSO-G8

1

0.043 in (1.1 mm)

0.118 in (3 mm)

No

e4

245 °C (473 °F)

0.118 in (3 mm)

MAX1162ACUB+T

Maxim Integrated

Analog To Digital Converter, Successive Approximation

Commercial

Gull Wing

10

TSSOP

Square

Plastic/Epoxy

1

Yes

5.25 V

200 kHz

1

BICMOS

16

0.0031 %

5 V

Binary

3/5,5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP10,.19,20

Analog to Digital Converters

0.02 in (0.5 mm)

70 °C (158 °F)

0 mV

Serial

0 °C (32 °F)

Matte Tin

Track

Dual

240 µs

S-PDSO-G10

1

0.043 in (1.1 mm)

0.118 in (3 mm)

No

e3

0.118 in (3 mm)

MAX1162ACUB-T

Maxim Integrated

Analog To Digital Converter, Successive Approximation

Commercial

Gull Wing

10

TSSOP

Square

Plastic/Epoxy

1

Yes

4.096 V

200 kHz

1

BICMOS

16

0.0031 %

5 V

Binary

3/5,5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP10,.19,20

Analog to Digital Converters

0.02 in (0.5 mm)

70 °C (158 °F)

0 mV

Serial

0 °C (32 °F)

Tin Lead

Track

Dual

240 µs

S-PDSO-G10

1

0.043 in (1.1 mm)

0.118 in (3 mm)

No

e0

0.118 in (3 mm)

MAX1183ECM-D

Maxim Integrated

Analog To Digital Converter, Flash Method

Industrial

Gull Wing

48

HTFQFP

Square

Plastic/Epoxy

1

Yes

1 V

40 MHz

2

CMOS

10

0.166 %

3 V

Offset Binary, 2's Complement Binary

2.5,3 V

Flatpack, Heat Sink/Slug, Thin Profile, Fine Pitch

TQFP48,.35SQ

Analog to Digital Converters

0.02 in (0.5 mm)

85 °C (185 °F)

-1 V

Parallel, Word

-40 °C (-40 °F)

Tin Lead

Track

Quad

S-PQFP-G48

0.047 in (1.2 mm)

0.276 in (7 mm)

No

e0

20 s

240 °C (464 °F)

0.276 in (7 mm)

MAX1193ETI

Maxim Integrated

Analog To Digital Converter, Flash Method

Industrial

No Lead

28

HVQCCN

Square

2

Yes

512 mV

45 MHz

1

CMOS

8

0.3906 %

3 V

Offset Binary

1.8,3 V

Chip Carrier, Heat Sink/Slug, Very Thin Profile

LCC28,.2SQ,20

Analog to Digital Converters

0.02 in (0.5 mm)

85 °C (185 °F)

-512 mV

Parallel, 8 Bits

-40 °C (-40 °F)

Tin Lead

Track

Quad

S-XQCC-N28

1

0.031 in (0.8 mm)

0.197 in (5 mm)

No

e0

0.197 in (5 mm)

MAX1238EEE

Maxim Integrated

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

16

SSOP

Rectangular

Plastic/Epoxy

12

Yes

2.048 V

94.4 kHz

1

BICMOS

12

0.0244 %

5 V

Binary, 2's Complement Binary

5 V

Small Outline, Shrink Pitch

SSOP16,.25

Analog to Digital Converters

0.025 in (0.635 mm)

85 °C (185 °F)

-2.048 V

Serial

-40 °C (-40 °F)

Tin Lead

Track

Dual

7.5 µs

R-PDSO-G16

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e0

20 s

240 °C (464 °F)

0.193 in (4.9 mm)

MAX1239EEE-T

Maxim Integrated

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

16

SSOP

Rectangular

Plastic/Epoxy

12

Yes

1.024 V

94.4 kHz

1

BICMOS

12

0.0244 %

3 V

Binary, 2's Complement Binary

3/3.3 V

Small Outline, Shrink Pitch

SSOP16,.25

Analog to Digital Converters

0.025 in (0.635 mm)

85 °C (185 °F)

-1.024 V

Serial

-40 °C (-40 °F)

Tin Lead

Track

Dual

7.5 µs

R-PDSO-G16

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e0

20 s

240 °C (464 °F)

0.193 in (4.9 mm)

MAX132CWG-T

Maxim Integrated

Analog To Digital Converter, Multi-Slope

Commercial

Gull Wing

24

SOP

Rectangular

Plastic/Epoxy

1

Yes

6 V

1

CMOS

18

125 μA

0.006 %

5 V

2's Complement Binary

±5 V

-5 V

Small Outline

SOP24,.4

Analog to Digital Converters

0.05 in (1.27 mm)

70 °C (158 °F)

-9 V

Serial

0 °C (32 °F)

Tin Lead

Dual

R-PDSO-G24

1

0.104 in (2.65 mm)

0.295 in (7.5 mm)

No

e0

245 °C (473 °F)

0.606 in (15.4 mm)

MAX167CENG

Maxim Integrated

Analog To Digital Converter, Successive Approximation

Industrial

Through-Hole

24

DIP

Rectangular

Plastic/Epoxy

1

No

2.5 V

1

CMOS

12

10 mA

0.024 %

5 V

Binary, Offset Binary

5,-12/-15 V

In-Line

DIP24,.3

Analog to Digital Converters

0.1 in (2.54 mm)

85 °C (185 °F)

-2.5 V

Parallel, 8 Bits

-40 °C (-40 °F)

Tin Lead

Track

Dual

8.13 µs

R-PDIP-T24

1

0.18 in (4.572 mm)

0.3 in (7.62 mm)

No

e0

1.203 in (30.545 mm)

MAX167CENG+

Maxim Integrated

Analog To Digital Converter

Industrial

Through-Hole

24

DIP

Rectangular

Plastic/Epoxy

1

No

2.5 V

1

CMOS

12

0.024 %

Binary, Offset Binary

5,-12/-15 V

In-Line

DIP24,.3

Analog to Digital Converters

0.1 in (2.54 mm)

85 °C (185 °F)

-40 °C (-40 °F)

Matte Tin

Dual

R-PDIP-T24

1

e3

30 s

260 °C (500 °F)

MAX1126EGK-D

Maxim Integrated

Analog To Digital Converter, Proprietary Method

Industrial

No Lead

68

HVQCCN

Square

4

Yes

1.4 V

40 MHz

1

Bipolar

12

1.8 V

Binary, Offset Binary, 2's Complement Binary

1.8 V

Chip Carrier, Heat Sink/Slug, Very Thin Profile

LCC68,.4SQ,20

Analog to Digital Converters

0.02 in (0.5 mm)

85 °C (185 °F)

0 mV

Parallel, Word

-40 °C (-40 °F)

Tin Lead

Track

Quad

S-XQCC-N68

1

0.035 in (0.9 mm)

0.394 in (10 mm)

No

e0

0.394 in (10 mm)

MAX1112EAP

Maxim Integrated

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

20

SSOP

Rectangular

Plastic/Epoxy

8

Yes

4.096 V

50 kHz

1

CMOS

8

0.1953 %

5 V

Binary

5 V

Small Outline, Shrink Pitch

SSOP20,.3

Analog to Digital Converters

0.026 in (0.65 mm)

85 °C (185 °F)

0 mV

Serial

-40 °C (-40 °F)

Tin Lead

Track

Dual

55 µs

R-PDSO-G20

1

0.078 in (1.99 mm)

0.208 in (5.29 mm)

No

e0

0.283 in (7.2 mm)

MAX1169BEUD

Maxim Integrated

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

14

TSSOP

Rectangular

Plastic/Epoxy

1

Yes

4.096 V

58.6 kHz

1

BICMOS

16

0.0031 %

5 V

Binary

3/5,5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP14,.25

Analog to Digital Converters

0.026 in (0.65 mm)

85 °C (185 °F)

0 mV

Serial

-40 °C (-40 °F)

Tin Lead

Track

Dual

6 µs

R-PDSO-G14

1

0.043 in (1.1 mm)

0.173 in (4.4 mm)

No

e0

0.197 in (5 mm)

MAX162BENG+

Maxim Integrated

Analog To Digital Converter, Successive Approximation

Industrial

Through-Hole

24

DIP

Rectangular

Plastic/Epoxy

1

No

5 V

1

CMOS

12

0.024 %

5 V

Offset Binary, Complementary Offset Binary

-15 V

In-Line

0.1 in (2.54 mm)

85 °C (185 °F)

0 mV

Parallel, 8 Bits

-40 °C (-40 °F)

Matte Tin

Dual

3.25 µs

R-PDIP-T24

1

0.18 in (4.572 mm)

0.3 in (7.62 mm)

No

e3

30 s

260 °C (500 °F)

1.203 in (30.545 mm)

MAX162BENG

Maxim Integrated

Analog To Digital Converter, Successive Approximation

Industrial

Through-Hole

24

DIP

Rectangular

Plastic/Epoxy

1

No

5 V

1

CMOS

12

0.024 %

5 V

Offset Binary, Complementary Offset Binary

-15 V

In-Line

0.1 in (2.54 mm)

85 °C (185 °F)

0 mV

Parallel, 8 Bits

-40 °C (-40 °F)

Tin Lead

Dual

3.25 µs

R-PDIP-T24

1

0.18 in (4.572 mm)

0.3 in (7.62 mm)

No

e0

1.203 in (30.545 mm)

MAX1138EEE

Maxim Integrated

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

16

SSOP

Rectangular

Plastic/Epoxy

12

Yes

2.048 V

94.4 kHz

1

BICMOS

10

0.0977 %

5 V

Binary, 2's Complement Binary

5 V

Small Outline, Shrink Pitch

SSOP16,.25

Analog to Digital Converters

0.025 in (0.635 mm)

85 °C (185 °F)

-2.048 V

Serial

-40 °C (-40 °F)

Tin Lead

Track

Dual

6.8 µs

R-PDSO-G16

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e0

0.193 in (4.89 mm)

MAX1325ECM

Maxim Integrated

Analog To Digital Converter, Proprietary Method

Industrial

Gull Wing

48

LFQFP

Square

Plastic/Epoxy

4

Yes

10 V

357 kHz

1

BICMOS

14

0.0122 %

5 V

2's Complement Binary

3,5 V

Flatpack, Low Profile, Fine Pitch

QFP48,.35SQ,20

Analog to Digital Converters

0.02 in (0.5 mm)

85 °C (185 °F)

-10 V

Parallel, Word

-40 °C (-40 °F)

Tin Lead

Track

Quad

2.5 µs

S-PQFP-G48

1

0.063 in (1.6 mm)

0.276 in (7 mm)

No

e0

245 °C (473 °F)

0.276 in (7 mm)

ICL7129ACQH-D

Maxim Integrated

Analog To Digital Converter, Dual-Slope

Commercial

J Bend

44

QCCJ

Square

Plastic/Epoxy

1

Yes

2 V

1

CMOS

4

9 V

Binary

9 V

Chip Carrier

LDCC44,.7SQ

Analog to Digital Converters

0.05 in (1.27 mm)

70 °C (158 °F)

-3 V

Parallel, Word

0 °C (32 °F)

Tin Lead

Quad

S-PQCC-J44

1

0.18 in (4.57 mm)

0.653 in (16.585 mm)

No

e0

0.653 in (16.585 mm)

MAX108CHC-D

Maxim Integrated

Analog To Digital Converter, Flash Method

Commercial

Ball

192

LBGA

Square

Plastic/Epoxy

1

Yes

525 mV

1500 MHz

1

Bipolar

8

0.1953 %

5 V

Offset Binary

3.3/5,±5 V

-5 V

Grid Array, Low Profile

BGA192,16X16,50

Analog to Digital Converters

0.05 in (1.27 mm)

70 °C (158 °F)

475 mV

Parallel, 8 Bits

0 °C (32 °F)

Track

Bottom

S-PBGA-B192

3

0.066 in (1.67 mm)

0.984 in (25 mm)

No

0.984 in (25 mm)

MAX1239LEEE

Maxim Integrated

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

16

SSOP

Rectangular

Plastic/Epoxy

12

Yes

1.024 V

94.4 kHz

1

BICMOS

12

0.0244 %

3 V

Binary, 2's Complement Binary

3/3.3 V

Small Outline, Shrink Pitch

SSOP16,.25

Analog to Digital Converters

0.025 in (0.635 mm)

85 °C (185 °F)

-1.024 V

Serial

-40 °C (-40 °F)

Tin Lead

Track

Dual

7.5 µs

R-PDSO-G16

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e0

245 °C (473 °F)

0.193 in (4.9 mm)

MAX1239LEEE+

Maxim Integrated

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

16

SSOP

Rectangular

Plastic/Epoxy

12

Yes

1.024 V

94.4 kHz

1

BICMOS

12

0.0244 %

3 V

Binary, 2's Complement Binary

Small Outline, Shrink Pitch

0.025 in (0.635 mm)

85 °C (185 °F)

-1.024 V

Serial

-40 °C (-40 °F)

Matte Tin

Track

Dual

7.5 µs

R-PDSO-G16

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e3

30 s

260 °C (500 °F)

0.193 in (4.9 mm)

MAX1205CMH

Maxim Integrated

Analog To Digital Converter, Proprietary Method

Commercial

Gull Wing

44

QFP

Square

Plastic/Epoxy

1

Yes

4.5 V

1 MHz

1

CMOS

14

5 V

Offset Binary, 2's Complement Binary, 1's Complement Binary

3.3/5,5 V

Flatpack

QFP44,.5SQ,32

Analog to Digital Converters

0.031 in (0.8 mm)

70 °C (158 °F)

-4.5 V

Parallel, Word

0 °C (32 °F)

Tin Lead

Sample

Quad

3.906 µs

S-PQFP-G44

1

0.094 in (2.388 mm)

0.394 in (10.0075 mm)

No

e0

245 °C (473 °F)

0.394 in (10.0075 mm)

MAX1228BEEP

Maxim Integrated

Analog To Digital Converter

Industrial

Gull Wing

20

SSOP

Rectangular

Plastic/Epoxy

1

Yes

4.096 V

1

BICMOS

12

0.024 %

5 V

Binary, 2's Complement Binary

5 V

Small Outline, Shrink Pitch

SSOP20,.25

Analog to Digital Converters

0.025 in (0.635 mm)

85 °C (185 °F)

-40 °C (-40 °F)

Tin Lead

Dual

R-PDSO-G20

1

No

e0

MAX1237EUA

Maxim Integrated

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

4

Yes

1.024 V

94.4 kHz

1

BICMOS

12

0.0244 %

3 V

Binary, 2's Complement Binary

3/3.3 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.19

Analog to Digital Converters

0.026 in (0.65 mm)

85 °C (185 °F)

-1.024 V

Serial

-40 °C (-40 °F)

Nickel Palladium Gold

Track

Dual

7.5 µs

S-PDSO-G8

1

0.043 in (1.1 mm)

0.118 in (3 mm)

No

e4

245 °C (473 °F)

0.118 in (3 mm)

MAX186ACWP

Maxim Integrated

Analog To Digital Converter, Successive Approximation

Commercial

Gull Wing

20

SOP

Rectangular

Plastic/Epoxy

8

Yes

2.048 V

133 kHz

1

CMOS

12

2.5 mA

0.0122 %

5 V

Binary, 2's Complement Binary

5/±5 V

-5 V

Small Outline

SOP20,.4

Analog to Digital Converters

0.05 in (1.27 mm)

70 °C (158 °F)

-2.048 V

Serial

0 °C (32 °F)

Tin Lead

Track

Dual

10 µs

R-PDSO-G20

1

0.104 in (2.65 mm)

0.295 in (7.5 mm)

No

e0

245 °C (473 °F)

0.504 in (12.8 mm)

MAX187BEPA

Maxim Integrated

Analog To Digital Converter, Successive Approximation

Industrial

Through-Hole

8

DIP

Rectangular

Plastic/Epoxy

1

No

4.096 V

75 kHz

1

CMOS

12

2.5 mA

0.0244 %

5 V

Binary

5 V

In-Line

DIP8,.3

Analog to Digital Converters

0.1 in (2.54 mm)

85 °C (185 °F)

0 mV

Serial

-40 °C (-40 °F)

Tin Lead

Track

Dual

8.5 µs

R-PDIP-T8

1

0.18 in (4.572 mm)

0.3 in (7.62 mm)

No

e0

245 °C (473 °F)

0.369 in (9.375 mm)

MAX114EAG

Maxim Integrated

Analog To Digital Converter, Flash Method

Industrial

Gull Wing

24

SSOP

Rectangular

Plastic/Epoxy

4

Yes

5.25 V

1 MHz

1

BICMOS

8

5 V

Binary

Small Outline, Shrink Pitch

0.026 in (0.65 mm)

85 °C (185 °F)

-5.25 V

Parallel, Word

-40 °C (-40 °F)

Tin/Lead

Track

Dual

865 ns

R-PDSO-G24

1

0.078 in (1.99 mm)

0.208 in (5.29 mm)

No

e0

20 s

240 °C (464 °F)

0.323 in (8.2 mm)

MAX1202BCAP

Maxim Integrated

Analog To Digital Converter, Successive Approximation

Commercial

Gull Wing

20

SSOP

Rectangular

Plastic/Epoxy

8

Yes

2.048 V

133 kHz

1

CMOS

12

0.0244 %

5 V

Binary, 2's Complement Binary

3/5,5,GND/-5 V

-5 V

Small Outline, Shrink Pitch

SSOP20,.3

Analog to Digital Converters

0.026 in (0.65 mm)

70 °C (158 °F)

-2.048 V

Serial

0 °C (32 °F)

Tin Lead

Track

Dual

10 µs

R-PDSO-G20

1

0.078 in (1.99 mm)

0.208 in (5.29 mm)

No

e0

245 °C (473 °F)

0.283 in (7.2 mm)

MAX1241CCSA

Maxim Integrated

Analog To Digital Converter, Successive Approximation

Commercial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

1

Yes

2.52 V

73 kHz

1

BICMOS

12

0.0244 %

3 V

Binary

3/5 V

Small Outline

SOP8,.25

Analog to Digital Converters

0.05 in (1.27 mm)

70 °C (158 °F)

0 mV

Serial

0 °C (32 °F)

Tin Lead

Track

Dual

7.5 µs

R-PDSO-G8

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e0

245 °C (473 °F)

0.193 in (4.9 mm)

MAX1270BEAI

Maxim Integrated

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

28

SSOP

Rectangular

Plastic/Epoxy

8

Yes

10 V

110 kHz

1

CMOS

12

0.0244 %

5 V

Binary, 2's Complement Binary

5 V

Small Outline, Shrink Pitch

SSOP28,.3

Analog to Digital Converters

0.026 in (0.65 mm)

85 °C (185 °F)

-10 V

Serial

-40 °C (-40 °F)

Tin Lead

Track

Dual

11 µs

R-PDSO-G28

1

0.078 in (1.99 mm)

0.208 in (5.29 mm)

No

e0

0.402 in (10.2 mm)

MAX190BENG

Maxim Integrated

Analog To Digital Converter, Successive Approximation

Industrial

Through-Hole

24

DIP

Rectangular

Plastic/Epoxy

1

No

5.25 V

76 kHz

1

CMOS

12

0.0244 %

5 V

Binary

5 V

In-Line

DIP24,.3

Analog to Digital Converters

0.1 in (2.54 mm)

85 °C (185 °F)

0 mV

Serial, Parallel, 8 Bits

-40 °C (-40 °F)

Tin Lead

Track

Dual

18 µs

R-PDIP-T24

1

0.18 in (4.572 mm)

0.3 in (7.62 mm)

No

e0

245 °C (473 °F)

1.203 in (30.545 mm)

MX7705EUE

Maxim Integrated

Analog To Digital Converter, Delta-Sigma

Industrial

Gull Wing

16

TSSOP

Rectangular

Plastic/Epoxy

2

Yes

1.75 V

38.4 kHz

1

BICMOS

16

0.003 %

3 V

Binary, Offset Binary

3/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP16,.25

Analog to Digital Converters

0.026 in (0.65 mm)

85 °C (185 °F)

-1 V

Serial

-40 °C (-40 °F)

Tin Lead

Track

Dual

R-PDSO-G16

1

0.043 in (1.1 mm)

0.173 in (4.4 mm)

No

e0

0.197 in (5 mm)

MAX1139MEEE+

Maxim Integrated

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

16

SSOP

Rectangular

Plastic/Epoxy

12

Yes

3.6 V

94.4 kHz

1

BICMOS

10

0.0977 %

3 V

Binary, 2's Complement Binary

Small Outline, Shrink Pitch

0.025 in (0.635 mm)

85 °C (185 °F)

0 mV

Serial

-40 °C (-40 °F)

Matte Tin

Track

Dual

6.8 µs

R-PDSO-G16

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e3

30 s

260 °C (500 °F)

0.193 in (4.89 mm)

MAX121CWE-T

Maxim Integrated

Analog To Digital Converter, Successive Approximation

Commercial

Gull Wing

16

SOP

Rectangular

Plastic/Epoxy

1

Yes

5 V

308 kHz

1

BICMOS

14

20 mA

5 V

2's Complement Binary

5,-12/-15 V

-15 V

Small Outline

SOP16,.4

Analog to Digital Converters

0.05 in (1.27 mm)

70 °C (158 °F)

-5 V

Serial

0 °C (32 °F)

Tin Lead

Track

Dual

2.91 µs

R-PDSO-G16

1

0.104 in (2.65 mm)

0.295 in (7.5 mm)

No

e0

0.406 in (10.3 mm)

MAX1066BCUP

Maxim Integrated

Analog To Digital Converter, Successive Approximation

Commercial

Gull Wing

20

TSSOP

Rectangular

Plastic/Epoxy

1

Yes

4.136 V

165 kHz

1

BICMOS

14

0.0122 %

5 V

Binary

5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP20,.25

Analog to Digital Converters

0.026 in (0.65 mm)

70 °C (158 °F)

0 mV

Parallel, Word

0 °C (32 °F)

Tin Lead

Track

Dual

4.7 µs

R-PDSO-G20

1

0.043 in (1.1 mm)

0.173 in (4.4 mm)

No

e0

0.256 in (6.5 mm)

MAX1245BC/D

Maxim Integrated

Analog To Digital Converter, Successive Approximation

Commercial

No Lead

20

DIE

Rectangular

8

Yes

1.024 V

100 kHz

1

CMOS

12

1.3 mA

0.0244 %

2.375 V

Binary, 2's Complement Binary

Uncased Chip

70 °C (158 °F)

-1.024 V

Serial

0 °C (32 °F)

Tin Lead

Track

Upper

65 µs

R-XUUC-N20

No

e0

MAX1167AEEE-T

Maxim Integrated

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

16

SSOP

Rectangular

Plastic/Epoxy

4

Yes

5.25 V

200 kHz

1

BICMOS

16

0.0031 %

5 V

Binary

3/5,5 V

Small Outline, Shrink Pitch

SSOP16,.25

Analog to Digital Converters

0.025 in (0.635 mm)

85 °C (185 °F)

0 mV

Serial

-40 °C (-40 °F)

Tin Lead

Track

Dual

7.07 µs

R-PDSO-G16

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e0

0.193 in (4.9 mm)

ICL7107EQH+TD

Maxim Integrated

Analog To Digital Converter, Dual-Slope

Commercial

J Bend

44

HQCCJ

Square

Plastic/Epoxy

1

Yes

1

CMOS

9 V

Binary

Chip Carrier, Heat Sink/Slug

0.05 in (1.27 mm)

70 °C (158 °F)

0 °C (32 °F)

Matte Tin

Quad

S-PQCC-J44

0.18 in (4.57 mm)

0.653 in (16.585 mm)

e3

0.653 in (16.585 mm)

MAX174ACPI

Maxim Integrated

Analog To Digital Converter, Successive Approximation

Commercial

Through-Hole

28

DIP

Rectangular

Plastic/Epoxy

1

No

10 V

1

BICMOS

12

10 mA

0.012 %

15 V

Binary, Offset Binary

5,±12/±15 V

-15 V

In-Line

DIP28,.6

Analog to Digital Converters

0.1 in (2.54 mm)

70 °C (158 °F)

-10 V

Parallel, Word

0 °C (32 °F)

Tin Lead

Dual

8 µs

R-PDIP-T28

1

0.2 in (5.08 mm)

0.6 in (15.24 mm)

No

e0

245 °C (473 °F)

1.45 in (36.83 mm)

MAX1268BEEG+

Maxim Integrated

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

24

SSOP

Rectangular

Plastic/Epoxy

6

Yes

2.525 V

420 kHz

1

12

0.0244 %

5 V

Binary, 2's Complement Binary

5 V

Small Outline, Shrink Pitch

SSOP24,.24

Analog to Digital Converters

0.025 in (0.635 mm)

85 °C (185 °F)

-2.525 V

Parallel, Word

-40 °C (-40 °F)

Matte Tin

Track

Dual

4 µs

R-PDSO-G24

1

0.068 in (1.73 mm)

0.154 in (3.9 mm)

No

e3

30 s

260 °C (500 °F)

0.341 in (8.65 mm)

MAX1297AEEG

Maxim Integrated

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

24

SSOP

Rectangular

Plastic/Epoxy

2

Yes

1.25 V

265 kHz

1

12

0.0122 %

3 V

Binary, 2's Complement Binary

3/3.3 V

Small Outline, Shrink Pitch

SSOP24,.24

Analog to Digital Converters

0.025 in (0.635 mm)

85 °C (185 °F)

-1.25 V

Parallel, Word

-40 °C (-40 °F)

Tin Lead

Track

Dual

4.1 µs

R-PDSO-G24

1

0.068 in (1.73 mm)

0.154 in (3.9 mm)

No

e0

245 °C (473 °F)

0.341 in (8.65 mm)

Analog-to-Digital Converters

Analog-to-digital converters (ADCs) are electronic devices that convert continuous analog signals into digital signals, which can be processed by digital circuits, microcontrollers, or computers. ADCs are essential components in many electronic systems, as they allow the measurement and processing of physical signals, such as temperature, pressure, light, and sound.

ADCs work by sampling the analog signal at regular intervals and quantizing the sampled signal into a series of digital values. The sampling rate and the resolution of the ADC determine the accuracy and the bandwidth of the digital signal. ADCs may also include features such as amplification, filtering, or signal conditioning, to improve the accuracy and stability of the digital signal.

ADCs can be classified based on their architecture and their application. The most common types of ADCs are successive approximation ADCs, delta-sigma ADCs, and pipeline ADCs. Each type has its advantages and limitations, depending on the application and the required performance.

ADCs are used in a wide range of applications, from consumer electronics, such as smartphones and digital cameras, to industrial automation, medical devices, and scientific instruments. They play a crucial role in the conversion of physical signals into digital signals, allowing the processing, storage, and transmission of data in electronic systems.

Overall, ADCs are essential components in many electronic systems, providing the necessary signal conversion for a wide range of applications. Their accuracy, speed, and resolution determine the performance and the functionality of many electronic devices and systems.