| Part | RoHS | Manufacturer | Converter Type | Temperature Grade | Terminal Form | No. of Terminals | Package Code | Package Shape | Total Dose (V) | Package Body Material | No. of Analog In Channels | Surface Mount | Maximum Supply Voltage | Maximum Analog Input Voltage | Sample Rate | No. of Functions | Technology | Screening Level | Nominal Bandwidth | No. of Bits | Maximum Supply Current | Maximum Linearity Error (EL) | Nominal Supply Voltage | Output Bit Code | Power Supplies (V) | Nominal Negative Supply Voltage | Package Style (Meter) | Package Equivalence Code | Sub-Category | Minimum Supply Voltage | Terminal Pitch | Maximum Operating Temperature | Minimum Analog Input Voltage | Output Format | Minimum Operating Temperature | Terminal Finish | Sample and Hold/Track and Hold | Terminal Position | Maximum Conversion Time | JESD-30 Code | Moisture Sensitivity Level (MSL) | Maximum Seated Height | Width | Qualification | Additional Features | JESD-609 Code | Maximum Time At Peak Reflow Temperature (s) | Peak Reflow Temperature (C) | Length | Input Bit Code |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
Texas Instruments |
Analog To Digital Converter, Delta-Sigma |
Commercial |
Gull Wing |
64 |
HTFQFP |
Square |
Plastic/Epoxy |
4 |
Yes |
6 V |
216 kHz |
1 |
24 |
10 mA |
5 V |
2's Complement Binary |
3.3,5 V |
Flatpack, Heat Sink/Slug, Thin Profile, Fine Pitch |
TQFP64,.47SQ |
Analog to Digital Converters |
0.02 in (0.5 mm) |
70 °C (158 °F) |
0 mV |
Serial |
-10 °C (14 °F) |
Nickel/Palladium/Gold |
Quad |
S-PQFP-G64 |
3 |
0.047 in (1.2 mm) |
0.394 in (10 mm) |
No |
e4 |
260 °C (500 °F) |
0.394 in (10 mm) |
||||||||||||||
|
|
Texas Instruments |
Analog To Digital Converter, Delta-Sigma |
Gull Wing |
20 |
TSSOP |
Rectangular |
Plastic/Epoxy |
2 |
Yes |
2.4 V |
32 kHz |
1 |
AEC-Q100 |
24 |
4.2 mA |
0.001 % |
3.3 V |
2's Complement Binary |
Small Outline, Thin Profile, Shrink Pitch |
TSSOP20,.25 |
2.7 V |
0.026 in (0.65 mm) |
125 °C (257 °F) |
-300 mV |
Serial |
-40 °C (-40 °F) |
Nickel Palladium Gold |
Dual |
R-PDSO-G20 |
3 |
0.047 in (1.2 mm) |
0.173 in (4.4 mm) |
e4 |
260 °C (500 °F) |
0.256 in (6.5 mm) |
|||||||||||||||
|
Texas Instruments |
Analog To Digital Converter, Proprietary Method |
Industrial |
Gull Wing |
128 |
HLFQFP |
Square |
Plastic/Epoxy |
2 |
Yes |
2.15 V |
1500 MHz |
1 |
CMOS |
8 |
0.3516 % |
1.9 V |
Offset Binary |
1.9 V |
Flatpack, Heat Sink/Slug, Low Profile, Fine Pitch |
QFP128,.87SQ,20 |
Analog to Digital Converters |
0.02 in (0.5 mm) |
85 °C (185 °F) |
0 mV |
Parallel, 8 Bits |
-40 °C (-40 °F) |
Tin Lead |
Sample |
Quad |
0.6 ns |
S-PQFP-G128 |
3 |
0.063 in (1.6 mm) |
0.787 in (20 mm) |
No |
e0 |
260 °C (500 °F) |
0.787 in (20 mm) |
||||||||||||
|
|
Texas Instruments |
Analog To Digital Converter, Successive Approximation |
Automotive |
No Lead |
16 |
HVQCCN |
Square |
1 |
Yes |
12.288 V |
1 MHz |
1 |
18 |
0.0016 % |
5 V |
Binary |
Chip Carrier, Heat Sink/Slug, Very Thin Profile |
0.026 in (0.65 mm) |
125 °C (257 °F) |
-12.288 V |
Serial |
-40 °C (-40 °F) |
Nickel Palladium Gold |
Sample |
Quad |
665 ns |
S-XQCC-N16 |
3 |
0.031 in (0.8 mm) |
0.157 in (4 mm) |
e4 |
30 s |
260 °C (500 °F) |
0.157 in (4 mm) |
||||||||||||||||
|
Texas Instruments |
Analog To Digital Converter, Flash Method |
Industrial |
J Bend |
44 |
QCCJ |
Square |
Plastic/Epoxy |
2 |
5.05 V |
1 MHz |
1 |
CMOS |
12 |
0.0366 % |
5 V |
Binary |
Chip Carrier |
0.05 in (1.27 mm) |
85 °C (185 °F) |
Parallel, Word |
-40 °C (-40 °F) |
Sample |
Lateral |
980 ns |
S-PLCC-J44 |
0.18 in (4.57 mm) |
0.65 in (16.51 mm) |
0.65 in (16.51 mm) |
||||||||||||||||||||||
|
|
Texas Instruments |
Analog To Digital Converter, Proprietary Method |
Industrial |
No Lead |
48 |
HVQCCN |
Square |
Plastic/Epoxy |
1 |
Yes |
2 V |
200 MHz |
1 |
12 |
113 mA |
0.1221 % |
1.8 V |
Offset Binary, 2's Complement Binary |
1.8 V |
Chip Carrier, Heat Sink/Slug, Very Thin Profile |
LCC48,.27SQ,20 |
Analog to Digital Converters |
0.02 in (0.5 mm) |
85 °C (185 °F) |
-2 V |
Parallel |
-40 °C (-40 °F) |
Nickel Palladium Gold Silver |
Sample |
Quad |
S-PQCC-N48 |
3 |
0.039 in (1 mm) |
0.276 in (7 mm) |
No |
Peak-to-peak input voltage range: 2 V |
e4 |
30 s |
260 °C (500 °F) |
0.276 in (7 mm) |
||||||||||
|
|
Texas Instruments |
Analog To Digital Converter, Delta-Sigma |
Industrial |
Gull Wing |
48 |
TFQFP |
Square |
Plastic/Epoxy |
1 |
Yes |
4.6 V |
2.5 MHz |
1 |
CMOS |
16 |
5 V |
2's Complement Binary |
3,5 V |
Flatpack, Thin Profile, Fine Pitch |
TQFP48,.35SQ |
Analog to Digital Converters |
0.02 in (0.5 mm) |
85 °C (185 °F) |
-100 mV |
Serial |
-40 °C (-40 °F) |
Nickel Palladium Gold |
Quad |
S-PQFP-G48 |
2 |
0.047 in (1.2 mm) |
0.276 in (7 mm) |
No |
e4 |
30 s |
260 °C (500 °F) |
0.276 in (7 mm) |
|||||||||||||
|
|
Texas Instruments |
Analog To Digital Converter, Successive Approximation |
Automotive |
No Lead |
24 |
HVQCCN |
Square |
Plastic/Epoxy |
1 |
Yes |
5.2 V |
500 kHz |
1 |
16 |
5.3 mA |
0.0008 % |
5 V |
2's Complement Binary |
Chip Carrier, Heat Sink/Slug, Very Thin Profile |
1.65 V |
0.02 in (0.5 mm) |
125 °C (257 °F) |
-2.5 V |
Serial |
-40 °C (-40 °F) |
Nickel/Palladium/Gold |
Sample |
Quad |
1.2 µs |
S-PQCC-N24 |
2 |
0.039 in (1 mm) |
0.157 in (4 mm) |
e4 |
30 s |
260 °C (500 °F) |
0.157 in (4 mm) |
|||||||||||||
|
|
Texas Instruments |
Analog To Digital Converter, Flash Method |
Industrial |
Gull Wing |
28 |
SOP |
Rectangular |
Plastic/Epoxy |
4 |
Yes |
5.55 V |
800 kHz |
1 |
CMOS |
10 |
0.1465 % |
5 V |
Binary |
5 V |
Small Outline |
SOP28,.4 |
Analog to Digital Converters |
0.05 in (1.27 mm) |
85 °C (185 °F) |
-50 mV |
Parallel, Word |
-40 °C (-40 °F) |
Matte Tin |
Sample |
Dual |
900 ns |
R-PDSO-G28 |
3 |
0.104 in (2.65 mm) |
0.295 in (7.5 mm) |
No |
e3 |
30 s |
260 °C (500 °F) |
0.705 in (17.9 mm) |
||||||||||
|
|
Texas Instruments |
Analog To Digital Converter, Successive Approximation |
Commercial |
Gull Wing |
32 |
TSSOP |
Rectangular |
Plastic/Epoxy |
8 |
Yes |
5.5 V |
1.25 MHz |
1 |
CMOS |
10 |
8.5 mA |
0.0977 % |
3 V |
Binary, 2's Complement Binary |
3/5 V |
Small Outline, Thin Profile, Shrink Pitch |
TSSOP32,.3 |
Analog to Digital Converters |
0.026 in (0.65 mm) |
70 °C (158 °F) |
0 mV |
Parallel, Word |
0 °C (32 °F) |
Nickel Palladium Gold |
Dual |
R-PDSO-G32 |
2 |
0.047 in (1.2 mm) |
0.244 in (6.2 mm) |
No |
e4 |
30 s |
260 °C (500 °F) |
0.433 in (11 mm) |
|||||||||||
|
|
Texas Instruments |
Analog To Digital Converter, Successive Approximation |
Industrial |
Gull Wing |
20 |
SOP |
Rectangular |
Plastic/Epoxy |
11 |
Yes |
5.5 V |
200 kHz |
1 |
12 |
2.4 mA |
0.0244 % |
5 V |
Binary, 2's Complement Binary |
3/5 V |
Small Outline |
SOP20,.4 |
Analog to Digital Converters |
0.05 in (1.27 mm) |
85 °C (185 °F) |
0 mV |
Serial |
-40 °C (-40 °F) |
Nickel Palladium Gold |
Sample |
Dual |
5.54 µs |
R-PDSO-G20 |
1 |
0.104 in (2.65 mm) |
0.295 in (7.5 mm) |
No |
e4 |
30 s |
260 °C (500 °F) |
0.505 in (12.825 mm) |
||||||||||
|
|
Texas Instruments |
Analog To Digital Converter, Proprietary Method |
Industrial |
No Lead |
56 |
HVQCCN |
Square |
Plastic/Epoxy |
4 |
Yes |
2 V |
125 MHz |
1 |
12 |
90 mA |
1.8 V |
Offset Binary, 2's Complement Binary |
Chip Carrier, Heat Sink/Slug, Very Thin Profile |
0.02 in (0.5 mm) |
85 °C (185 °F) |
-2 V |
Serial |
-40 °C (-40 °F) |
Nickel Palladium Gold |
Quad |
S-PQCC-N56 |
3 |
0.039 in (1 mm) |
0.315 in (8 mm) |
Peak-to-peak input voltage range: 2 V |
e4 |
30 s |
260 °C (500 °F) |
0.315 in (8 mm) |
||||||||||||||||
|
|
Texas Instruments |
Analog To Digital Converter, Successive Approximation |
Industrial |
Gull Wing |
28 |
SOP |
Rectangular |
Plastic/Epoxy |
1 |
Yes |
10 V |
117 kHz |
1 |
CMOS |
12 |
24 mA |
0.0244 % |
5 V |
Binary, Offset Binary |
5,5/-15 V |
-15 V |
Small Outline |
SOP28,.4 |
Analog to Digital Converters |
4.5 V |
0.05 in (1.27 mm) |
85 °C (185 °F) |
-10 V |
Parallel, Word |
-40 °C (-40 °F) |
Nickel Palladium Gold |
Sample |
Dual |
8.5 µs |
R-PDSO-G28 |
3 |
0.104 in (2.65 mm) |
0.295 in (7.5 mm) |
No |
e4 |
30 s |
260 °C (500 °F) |
0.705 in (17.9 mm) |
|||||||
|
Texas Instruments |
Analog To Digital Converter, Successive Approximation |
Industrial |
Gull Wing |
16 |
SSOP |
Rectangular |
Plastic/Epoxy |
4 |
Yes |
5 V |
125 kHz |
1 |
CMOS |
12 |
0.0488 % |
2.7 V |
Binary |
Small Outline, Shrink Pitch |
0.025 in (0.635 mm) |
85 °C (185 °F) |
0 mV |
Serial |
-40 °C (-40 °F) |
Sample |
Dual |
6 µs |
R-PDSO-G16 |
0.069 in (1.75 mm) |
0.154 in (3.9 mm) |
0.193 in (4.89 mm) |
||||||||||||||||||||
|
|
Texas Instruments |
Analog To Digital Converter, Proprietary Method |
Industrial |
Gull Wing |
48 |
HTFQFP |
Square |
Plastic/Epoxy |
1 |
Yes |
2 V |
80 MHz |
1 |
CMOS |
12 |
0.1709 % |
5 V |
Offset Binary, 2's Complement Binary |
5 V |
Flatpack, Heat Sink/Slug, Thin Profile, Fine Pitch |
TQFP48,.35SQ |
Analog to Digital Converters |
0.02 in (0.5 mm) |
85 °C (185 °F) |
1 V |
Parallel, Word |
-40 °C (-40 °F) |
Track |
Quad |
1 µs |
S-PQFP-G48 |
0.047 in (1.2 mm) |
0.276 in (7 mm) |
No |
0.276 in (7 mm) |
|||||||||||||||
|
|
Texas Instruments |
Analog To Digital Converter, Successive Approximation |
Industrial |
No Lead |
10 |
VSON |
Square |
Plastic/Epoxy |
1 |
Yes |
5.6 V |
500 kHz |
1 |
16 |
0.0015 % |
5 V |
Binary |
3.3,5 V |
Small Outline, Very Thin Profile |
SOLCC10,.12,20 |
Analog to Digital Converters |
0.02 in (0.5 mm) |
85 °C (185 °F) |
-2.048 V |
Serial |
-40 °C (-40 °F) |
Nickel Palladium Gold |
Sample |
Dual |
1.4 µs |
S-PDSO-N10 |
3 |
0.039 in (1 mm) |
0.118 in (3 mm) |
No |
e4 |
30 s |
260 °C (500 °F) |
0.118 in (3 mm) |
|||||||||||
|
|
Texas Instruments |
Analog To Digital Converter, Proprietary Method |
Industrial |
No Lead |
64 |
HVQCCN |
Square |
Plastic/Epoxy |
4 |
Yes |
2 V |
125 MHz |
1 |
CMOS |
14 |
0.0305 % |
3.3 V |
Binary, Offset Binary, 2's Complement Binary |
3.3 V |
Chip Carrier, Heat Sink/Slug, Very Thin Profile |
LCC64,.35SQ,20 |
Analog to Digital Converters |
0.02 in (0.5 mm) |
85 °C (185 °F) |
0 mV |
Serial |
-40 °C (-40 °F) |
Nickel Palladium Gold |
Sample |
Quad |
S-PQCC-N64 |
3 |
0.039 in (1 mm) |
0.354 in (9 mm) |
No |
e4 |
30 s |
260 °C (500 °F) |
0.354 in (9 mm) |
|||||||||||
|
Texas Instruments |
Analog To Digital Converter, Successive Approximation |
Industrial |
Gull Wing |
6 |
VSSOP |
Rectangular |
Plastic/Epoxy |
1 |
Yes |
5.5 V |
188 kHz |
1 |
10 |
0.0684 % |
3 V |
Binary |
Small Outline, Very Thin Profile, Shrink Pitch |
0.037 in (0.95 mm) |
105 °C (221 °F) |
0 mV |
Serial |
-40 °C (-40 °F) |
Tin Lead |
Track |
Dual |
R-PDSO-G6 |
1 |
0.039 in (1 mm) |
0.065 in (1.65 mm) |
No |
e0 |
0.117 in (2.97 mm) |
||||||||||||||||||
|
|
Texas Instruments |
Analog To Digital Converter, Proprietary Method |
Industrial |
No Lead |
64 |
HVQCCN |
Square |
Plastic/Epoxy |
4 |
Yes |
2 V |
105 MHz |
1 |
CMOS |
12 |
0.0537 % |
3.3 V |
Offset Binary, 2's Complement Binary |
3.3 V |
Chip Carrier, Heat Sink/Slug, Very Thin Profile |
LCC64,.35SQ,20 |
Analog to Digital Converters |
0.02 in (0.5 mm) |
85 °C (185 °F) |
-2 V |
Serial |
-40 °C (-40 °F) |
Nickel Palladium Gold |
Sample |
Quad |
S-PQCC-N64 |
3 |
0.039 in (1 mm) |
0.354 in (9 mm) |
No |
Peak-to-peak input voltage range: 2 V |
e4 |
30 s |
260 °C (500 °F) |
0.354 in (9 mm) |
||||||||||
|
Texas Instruments |
Analog To Digital Converter, Successive Approximation |
Military |
Through-Hole |
20 |
DIP |
Rectangular |
Ceramic, Glass-Sealed |
11 |
No |
5.5 V |
38 kHz |
1 |
CMOS |
MIL-PRF-38535 Class Q |
10 |
0.0488 % |
5 V |
Binary |
5 V |
In-Line |
DIP20,.3 |
Analog to Digital Converters |
0.1 in (2.54 mm) |
125 °C (257 °F) |
0 mV |
Serial |
-55 °C (-67 °F) |
Sample |
Dual |
21 µs |
R-GDIP-T20 |
0.2 in (5.08 mm) |
0.3 in (7.62 mm) |
No |
0.953 in (24.195 mm) |
|||||||||||||||
|
|
Texas Instruments |
Analog To Digital Converter, Successive Approximation |
Industrial |
No Lead |
8 |
HVSON |
Square |
Plastic/Epoxy |
1 |
Yes |
5.25 V |
200 kHz |
1 |
CMOS |
10 |
0.0977 % |
2.7 V |
Binary |
2.7 V |
Small Outline, Heat Sink/Slug, Very Thin Profile |
SOLCC8,.12,25 |
Analog to Digital Converters |
2.7 V |
0.026 in (0.65 mm) |
85 °C (185 °F) |
0 mV |
Serial |
-40 °C (-40 °F) |
Nickel Palladium Gold |
Sample |
Dual |
3.57 µs |
S-PDSO-N8 |
2 |
0.039 in (1 mm) |
0.118 in (3 mm) |
No |
e4 |
30 s |
260 °C (500 °F) |
0.118 in (3 mm) |
|||||||||
|
|
Texas Instruments |
Analog To Digital Converter, Proprietary Method |
Industrial |
No Lead |
64 |
HVQCCN |
Square |
Plastic/Epoxy |
2 |
Yes |
2 V |
105 MHz |
1 |
CMOS |
14 |
0.0305 % |
3.3 V |
Binary, Offset Binary, 2's Complement Binary |
1.8/3.3,3.3 V |
Chip Carrier, Heat Sink/Slug, Very Thin Profile |
LCC64,.35SQ,20 |
Analog to Digital Converters |
0.02 in (0.5 mm) |
85 °C (185 °F) |
-2 V |
Parallel, Word |
-40 °C (-40 °F) |
Nickel Palladium Gold |
Sample |
Quad |
9.5 ns |
S-PQCC-N64 |
3 |
0.039 in (1 mm) |
0.354 in (9 mm) |
No |
e4 |
30 s |
260 °C (500 °F) |
0.354 in (9 mm) |
||||||||||
|
|
Texas Instruments |
Analog To Digital Converter, Delta-Sigma |
Industrial |
Gull Wing |
14 |
TSSOP |
Rectangular |
Plastic/Epoxy |
2 |
Yes |
3.3 V |
96 kHz |
1 |
CMOS |
24 |
11 mA |
5 V |
2's Complement Binary |
3.3,5 V |
Small Outline, Thin Profile, Shrink Pitch |
TSSOP14,.25 |
Analog to Digital Converters |
0.026 in (0.65 mm) |
85 °C (185 °F) |
0 mV |
Serial |
-40 °C (-40 °F) |
Nickel Palladium Gold |
Dual |
R-PDSO-G14 |
1 |
0.047 in (1.2 mm) |
0.173 in (4.4 mm) |
No |
e4 |
30 s |
260 °C (500 °F) |
0.197 in (5 mm) |
||||||||||||
|
|
Texas Instruments |
Analog To Digital Converter, Proprietary Method |
Industrial |
Gull Wing |
64 |
HTFQFP |
Square |
Plastic/Epoxy |
4 |
Yes |
1 V |
40 MHz |
1 |
CMOS |
12 |
0.0488 % |
3.3 V |
Offset Binary |
3.3 V |
Flatpack, Heat Sink/Slug, Thin Profile, Fine Pitch |
TQFP64,.47SQ |
Analog to Digital Converters |
0.02 in (0.5 mm) |
85 °C (185 °F) |
-1 V |
Serial |
-40 °C (-40 °F) |
Nickel Palladium Gold |
Sample |
Quad |
S-PQFP-G64 |
3 |
0.047 in (1.2 mm) |
0.394 in (10 mm) |
No |
Peak-to-peak input voltage range: 1 V |
e4 |
30 s |
260 °C (500 °F) |
0.394 in (10 mm) |
||||||||||
|
Texas Instruments |
Analog To Digital Converter |
Industrial |
Through-Hole |
28 |
DIP |
Rectangular |
Plastic/Epoxy |
1 |
No |
1 |
CMOS |
8 |
Offset Binary |
In-Line |
DIP28,.6 |
Analog to Digital Converters |
0.1 in (2.54 mm) |
85 °C (185 °F) |
-40 °C (-40 °F) |
Dual |
R-PDIP-T28 |
No |
||||||||||||||||||||||||||||
|
Texas Instruments |
Analog To Digital Converter |
Industrial |
Through-Hole |
40 |
DIP |
Rectangular |
Plastic/Epoxy |
1 |
No |
0 mV |
1 |
CMOS |
8 |
0.2 % |
5 V |
Binary |
5 V |
In-Line |
DIP40,.6 |
Analog to Digital Converters |
0.1 in (2.54 mm) |
85 °C (185 °F) |
-40 °C (-40 °F) |
Dual |
R-PDIP-T40 |
No |
||||||||||||||||||||||||
|
|
Texas Instruments |
Analog To Digital Converter, Proprietary Method |
Industrial |
No Lead |
56 |
HVQCCN |
Square |
Plastic/Epoxy |
4 |
Yes |
2 V |
125 MHz |
1 |
14 |
125 mA |
1.8 V |
Offset Binary, 2's Complement Binary |
Chip Carrier, Heat Sink/Slug, Very Thin Profile |
0.02 in (0.5 mm) |
85 °C (185 °F) |
-2 V |
Serial |
-40 °C (-40 °F) |
Nickel Palladium Gold |
Quad |
S-PQCC-N56 |
3 |
0.039 in (1 mm) |
0.315 in (8 mm) |
Peak-to-peak input voltage range: 2 V |
e4 |
30 s |
260 °C (500 °F) |
0.315 in (8 mm) |
||||||||||||||||
|
Texas Instruments |
Analog To Digital Converter, Proprietary Method |
Industrial |
Gull Wing |
32 |
LQFP |
Square |
Plastic/Epoxy |
1 |
Yes |
3.1 V |
66 MHz |
1 |
CMOS |
12 |
0.0659 % |
3.3 V |
Offset Binary |
Flatpack, Low Profile |
0.031 in (0.8 mm) |
85 °C (185 °F) |
0 mV |
Parallel, Word |
-40 °C (-40 °F) |
Tin Lead |
Sample |
Quad |
15 ns |
S-PQFP-G32 |
3 |
0.063 in (1.6 mm) |
0.276 in (7 mm) |
e0 |
40 s |
260 °C (500 °F) |
0.276 in (7 mm) |
|||||||||||||||
|
|
Texas Instruments |
Analog To Digital Converter, Successive Approximation |
Industrial |
Gull Wing |
16 |
SOP |
Rectangular |
Plastic/Epoxy |
1 |
Yes |
10 V |
40 kHz |
1 |
CMOS |
16 |
0.0046 % |
5 V |
2's Complement Binary |
5 V |
Small Outline |
SOP16,.4 |
Analog to Digital Converters |
4.75 V |
0.05 in (1.27 mm) |
85 °C (185 °F) |
-10 V |
Serial |
-40 °C (-40 °F) |
Nickel Palladium Gold |
Sample |
Dual |
20 µs |
R-PDSO-G16 |
3 |
0.104 in (2.65 mm) |
0.295 in (7.5 mm) |
No |
e4 |
30 s |
260 °C (500 °F) |
0.406 in (10.3 mm) |
|||||||||
|
|
Texas Instruments |
Analog To Digital Converter, Proprietary Method |
Industrial |
Gull Wing |
28 |
TSSOP |
Rectangular |
Plastic/Epoxy |
1 |
Yes |
1 V |
40 MHz |
1 |
CMOS |
10 |
0.1465 % |
3 V |
Binary, 2's Complement Binary |
3 V |
Small Outline, Thin Profile, Shrink Pitch |
TSSOP28,.25 |
Analog to Digital Converters |
0.026 in (0.65 mm) |
85 °C (185 °F) |
-1 V |
Parallel, Word |
-40 °C (-40 °F) |
Nickel Palladium Gold |
Sample |
Dual |
R-PDSO-G28 |
1 |
0.047 in (1.2 mm) |
0.173 in (4.4 mm) |
No |
e4 |
30 s |
260 °C (500 °F) |
0.382 in (9.7 mm) |
|||||||||||
|
|
Texas Instruments |
Analog To Digital Converter, Proprietary Method |
Industrial |
Gull Wing |
28 |
SSOP |
Rectangular |
Plastic/Epoxy |
1 |
Yes |
3.5 V |
5 MHz |
1 |
12 |
0.0488 % |
5 V |
Offset Binary |
5 V |
Small Outline, Shrink Pitch |
SSOP28,.3 |
Analog to Digital Converters |
0.026 in (0.65 mm) |
85 °C (185 °F) |
1.5 V |
Parallel, Word |
-40 °C (-40 °F) |
Nickel Palladium Gold |
Track |
Dual |
R-PDSO-G28 |
2 |
0.079 in (2 mm) |
0.209 in (5.3 mm) |
No |
e4 |
30 s |
260 °C (500 °F) |
0.402 in (10.2 mm) |
||||||||||||
|
|
Texas Instruments |
Analog To Digital Converter, Successive Approximation |
Automotive |
Gull Wing |
6 |
LSSOP |
Rectangular |
Plastic/Epoxy |
1 |
Yes |
5.25 V |
1.25 MHz |
1 |
CMOS |
10 |
0.0732 % |
3.3 V |
Binary |
2.5/5 V |
Small Outline, Low Profile, Shrink Pitch |
TSOP6,.11,37 |
Analog to Digital Converters |
0.037 in (0.95 mm) |
125 °C (257 °F) |
0 mV |
Serial |
-40 °C (-40 °F) |
Sample |
Dual |
560 ns |
R-PDSO-G6 |
0.057 in (1.45 mm) |
0.063 in (1.6 mm) |
No |
0.114 in (2.9 mm) |
|||||||||||||||
|
|
Texas Instruments |
Analog To Digital Converter, Flash Method |
Industrial |
No Lead |
64 |
HVQCCN |
Square |
Plastic/Epoxy |
2 |
Yes |
2 V |
125 MHz |
1 |
14 |
0.03 % |
1.8 V |
Offset Binary, 2's Complement Binary |
1.8 V |
Chip Carrier, Heat Sink/Slug, Very Thin Profile |
LCC64,.35SQ,20 |
Analog to Digital Converters |
0.02 in (0.5 mm) |
85 °C (185 °F) |
0 mV |
Parallel, Word |
-40 °C (-40 °F) |
Nickel Palladium Gold |
Sample |
Quad |
S-PQCC-N64 |
3 |
0.039 in (1 mm) |
0.354 in (9 mm) |
No |
e4 |
30 s |
260 °C (500 °F) |
0.354 in (9 mm) |
||||||||||||
|
|
Texas Instruments |
Analog To Digital Converter, Successive Approximation |
Industrial |
Gull Wing |
20 |
SOP |
Rectangular |
Plastic/Epoxy |
8 |
Yes |
5.5 V |
400 kHz |
1 |
CMOS |
12 |
0.0244 % |
5 V |
Binary, 2's Complement Binary |
5 V |
Small Outline |
SOP20,.25 |
Analog to Digital Converters |
0.05 in (1.27 mm) |
85 °C (185 °F) |
0 mV |
Serial |
-40 °C (-40 °F) |
Sample |
Dual |
R-PDSO-G20 |
0.104 in (2.65 mm) |
0.295 in (7.5 mm) |
No |
0.504 in (12.8 mm) |
||||||||||||||||
|
|
Texas Instruments |
Analog To Digital Converter, Delta-Sigma |
Commercial |
Gull Wing |
32 |
TQFP |
Square |
Plastic/Epoxy |
2 |
Yes |
0 mV |
3 kHz |
1 |
CMOS |
20 |
0.025 % |
5 V |
Binary |
5 V |
Flatpack, Thin Profile |
TQFP32,.35SQ,32 |
Analog to Digital Converters |
0.031 in (0.8 mm) |
70 °C (158 °F) |
Serial |
0 °C (32 °F) |
Quad |
220 µs |
S-PQFP-G32 |
0.047 in (1.2 mm) |
0.276 in (7 mm) |
No |
0.276 in (7 mm) |
|||||||||||||||||
|
|
Texas Instruments |
Analog To Digital Converter, Proprietary Method |
Industrial |
Gull Wing |
28 |
SSOP |
Rectangular |
Plastic/Epoxy |
1 |
Yes |
2 V |
20 MHz |
1 |
CMOS |
10 |
22 mA |
0.3418 % |
3 V |
Offset Binary |
3 V |
Small Outline, Shrink Pitch |
SSOP28,.3 |
Analog to Digital Converters |
0.026 in (0.65 mm) |
85 °C (185 °F) |
-2 V |
Parallel, Word |
-40 °C (-40 °F) |
Nickel Palladium Gold |
Track |
Dual |
100 µs |
R-PDSO-G28 |
1 |
0.079 in (2 mm) |
0.209 in (5.3 mm) |
No |
Peak-to-peak input voltage range: 1, 2 V |
e4 |
30 s |
260 °C (500 °F) |
0.402 in (10.2 mm) |
||||||||
|
|
Texas Instruments |
Analog To Digital Converter, Delta-Sigma |
Commercial |
Ball |
64 |
LFBGA |
Square |
Plastic/Epoxy |
32 |
Yes |
3.125 kHz |
1 |
20 |
0.05015 % |
5 V |
Binary, Offset Binary |
Grid Array, Low Profile, Fine Pitch |
0.031 in (0.8 mm) |
70 °C (158 °F) |
Serial |
0 °C (32 °F) |
Tin/Silver/Copper |
Bottom |
135.6 µs |
S-PBGA-B64 |
3 |
0.057 in (1.45 mm) |
0.315 in (8 mm) |
e1 |
260 °C (500 °F) |
0.315 in (8 mm) |
|||||||||||||||||||
|
Texas Instruments |
Analog To Digital Converter, Flash Method |
Industrial |
J Bend |
20 |
QCCJ |
Square |
Plastic/Epoxy |
1 |
Yes |
10.2 V |
625 kHz |
1 |
CMOS |
8 |
13 mA |
0.195 % |
5 V |
Binary |
5 V |
Chip Carrier |
LDCC20,.4SQ |
Analog to Digital Converters |
0.05 in (1.27 mm) |
85 °C (185 °F) |
-200 mV |
Parallel, 8 Bits |
-40 °C (-40 °F) |
Track |
Quad |
2.5 µs |
S-PQCC-J20 |
0.18 in (4.57 mm) |
0.353 in (8.9662 mm) |
No |
0.353 in (8.9662 mm) |
|||||||||||||||
|
|
Texas Instruments |
Analog To Digital Converter, Proprietary Method |
Automotive |
No Lead |
16 |
HVQCCN |
Square |
Plastic/Epoxy |
2 |
Yes |
5.5 V |
700 kHz |
1 |
16 |
10 mA |
0.0038 % |
5 V |
Binary |
Chip Carrier, Heat Sink/Slug, Very Thin Profile |
1.65 V |
0.02 in (0.5 mm) |
125 °C (257 °F) |
-2.4 V |
Serial |
-40 °C (-40 °F) |
Nickel Palladium Gold |
Sample |
Quad |
640 ns |
S-PQCC-N16 |
2 |
0.031 in (0.8 mm) |
0.118 in (3 mm) |
e4 |
30 s |
260 °C (500 °F) |
0.118 in (3 mm) |
|||||||||||||
|
|
Texas Instruments |
Analog To Digital Converter, Successive Approximation |
Commercial |
Through-Hole |
8 |
DIP |
Rectangular |
Plastic/Epoxy |
1 |
No |
6 V |
45.5 kHz |
1 |
CMOS |
8 |
0.1953 % |
5 V |
Binary |
In-Line |
0.1 in (2.54 mm) |
70 °C (158 °F) |
0 mV |
Serial |
0 °C (32 °F) |
Nickel Palladium Gold |
Sample |
Dual |
17 µs |
R-PDIP-T8 |
0.2 in (5.08 mm) |
0.3 in (7.62 mm) |
No |
e4 |
0.386 in (9.81 mm) |
||||||||||||||||
|
Texas Instruments |
Analog To Digital Converter, Resistance Ladder |
Industrial |
Gull Wing |
20 |
TSSOP |
Rectangular |
Plastic/Epoxy |
1 |
Yes |
3 V |
42 MHz |
1 |
CMOS |
8 |
0.5469 % |
3 V |
Binary |
Small Outline, Thin Profile, Shrink Pitch |
TSSOP20,.25 |
0.026 in (0.65 mm) |
85 °C (185 °F) |
735 mV |
Parallel, 8 Bits |
-40 °C (-40 °F) |
Sample |
Dual |
23 ns |
R-PDSO-G20 |
0.047 in (1.2 mm) |
0.173 in (4.4 mm) |
0.256 in (6.5 mm) |
|||||||||||||||||||
|
|
Texas Instruments |
Analog To Digital Converter, Successive Approximation |
Industrial |
No Lead |
10 |
HVSON |
Square |
Plastic/Epoxy |
1 |
Yes |
5 V |
680 kHz |
1 |
16 |
1.8 mA |
0.0031 % |
3 V |
Binary |
3 V |
Small Outline, Heat Sink/Slug, Very Thin Profile |
SOLCC10,.12,20 |
Analog to Digital Converters |
1.65 V |
0.02 in (0.5 mm) |
85 °C (185 °F) |
0 mV |
Serial |
-40 °C (-40 °F) |
Nickel Palladium Gold |
Sample |
Dual |
930 ns |
S-PDSO-N10 |
2 |
0.039 in (1 mm) |
0.118 in (3 mm) |
No |
e4 |
30 s |
260 °C (500 °F) |
0.118 in (3 mm) |
|||||||||
|
|
Texas Instruments |
Analog To Digital Converter, Successive Approximation |
Industrial |
Gull Wing |
20 |
SOP |
Rectangular |
Plastic/Epoxy |
8 |
Yes |
5 V |
1 |
CMOS |
8 |
0.3906 % |
5 V |
Binary |
5 V |
Small Outline |
SOP20,.4 |
Analog to Digital Converters |
0.05 in (1.27 mm) |
85 °C (185 °F) |
0 mV |
Serial |
-40 °C (-40 °F) |
Nickel Palladium Gold |
Sample |
Dual |
32 µs |
R-PDSO-G20 |
1 |
0.104 in (2.65 mm) |
0.295 in (7.5 mm) |
No |
e4 |
30 s |
260 °C (500 °F) |
0.504 in (12.8 mm) |
|||||||||||
|
Texas Instruments |
Analog To Digital Converter, Successive Approximation |
Automotive |
Gull Wing |
20 |
SSOP |
Rectangular |
Plastic/Epoxy |
11 |
Yes |
5.5 V |
38 kHz |
1 |
CMOS |
10 |
0.0977 % |
5 V |
Binary |
5 V |
Small Outline, Shrink Pitch |
SSOP20,.3 |
Analog to Digital Converters |
0.026 in (0.65 mm) |
125 °C (257 °F) |
0 mV |
Serial |
-40 °C (-40 °F) |
Sample |
Dual |
21 µs |
R-PDSO-G20 |
0.079 in (2 mm) |
0.209 in (5.3 mm) |
No |
0.283 in (7.2 mm) |
||||||||||||||||
|
Texas Instruments |
Analog To Digital Converter, Successive Approximation |
Industrial |
Gull Wing |
14 |
SOP |
Rectangular |
Plastic/Epoxy |
2 |
Yes |
6.35 V |
1 |
8 |
5 V |
Binary |
Small Outline |
0.05 in (1.27 mm) |
85 °C (185 °F) |
-50 mV |
Serial |
-40 °C (-40 °F) |
Sample |
Dual |
8 µs |
R-PDSO-G14 |
0.104 in (2.642 mm) |
0.295 in (7.493 mm) |
0.354 in (8.9915 mm) |
|||||||||||||||||||||||
|
Texas Instruments |
Analog To Digital Converter |
Industrial |
Gull Wing |
24 |
TSSOP |
Rectangular |
Plastic/Epoxy |
1 |
Yes |
1 |
24 |
0.0015 % |
5 V |
Offset Binary |
5 V |
Small Outline, Thin Profile, Shrink Pitch |
TSSOP24,.25 |
Analog to Digital Converters |
0.025 in (0.635 mm) |
105 °C (221 °F) |
-40 °C (-40 °F) |
Dual |
R-PDSO-G24 |
No |
||||||||||||||||||||||||||
|
Texas Instruments |
Analog To Digital Converter, Proprietary Method |
Industrial |
No Lead |
60 |
HVQCCN |
Square |
2 |
Yes |
1.6 V |
80 MHz |
1 |
CMOS |
14 |
0.0244 % |
3 V |
Offset Binary, 2's Complement Binary |
Chip Carrier, Heat Sink/Slug, Very Thin Profile |
0.02 in (0.5 mm) |
85 °C (185 °F) |
1.4 V |
Parallel, Word |
-40 °C (-40 °F) |
Tin Lead |
Sample |
Quad |
12.5 ns |
S-XQCC-N60 |
3 |
0.031 in (0.8 mm) |
0.354 in (9 mm) |
e0 |
0.354 in (9 mm) |
||||||||||||||||||
|
Texas Instruments |
Analog To Digital Converter, Successive Approximation |
Military |
No Lead |
20 |
QCCN |
Square |
Ceramic, Metal-Sealed Cofired |
11 |
Yes |
5.5 V |
38 kHz |
1 |
CMOS |
MIL-PRF-38535 Class Q |
10 |
0.0488 % |
5 V |
Binary |
5 V |
Chip Carrier |
LCC20,.35SQ |
Analog to Digital Converters |
0.05 in (1.27 mm) |
125 °C (257 °F) |
0 mV |
Serial |
-55 °C (-67 °F) |
Sample |
Quad |
21 µs |
S-CQCC-N20 |
0.08 in (2.03 mm) |
0.35 in (8.89 mm) |
No |
0.35 in (8.89 mm) |
Analog-to-digital converters (ADCs) are electronic devices that convert continuous analog signals into digital signals, which can be processed by digital circuits, microcontrollers, or computers. ADCs are essential components in many electronic systems, as they allow the measurement and processing of physical signals, such as temperature, pressure, light, and sound.
ADCs work by sampling the analog signal at regular intervals and quantizing the sampled signal into a series of digital values. The sampling rate and the resolution of the ADC determine the accuracy and the bandwidth of the digital signal. ADCs may also include features such as amplification, filtering, or signal conditioning, to improve the accuracy and stability of the digital signal.
ADCs can be classified based on their architecture and their application. The most common types of ADCs are successive approximation ADCs, delta-sigma ADCs, and pipeline ADCs. Each type has its advantages and limitations, depending on the application and the required performance.
ADCs are used in a wide range of applications, from consumer electronics, such as smartphones and digital cameras, to industrial automation, medical devices, and scientific instruments. They play a crucial role in the conversion of physical signals into digital signals, allowing the processing, storage, and transmission of data in electronic systems.
Overall, ADCs are essential components in many electronic systems, providing the necessary signal conversion for a wide range of applications. Their accuracy, speed, and resolution determine the performance and the functionality of many electronic devices and systems.