Analog-to-Digital Converters

Reset All
Part RoHS Manufacturer Converter Type Temperature Grade Terminal Form No. of Terminals Package Code Package Shape Total Dose (V) Package Body Material No. of Analog In Channels Surface Mount Maximum Supply Voltage Maximum Analog Input Voltage Sample Rate No. of Functions Technology Screening Level Nominal Bandwidth No. of Bits Maximum Supply Current Maximum Linearity Error (EL) Nominal Supply Voltage Output Bit Code Power Supplies (V) Nominal Negative Supply Voltage Package Style (Meter) Package Equivalence Code Sub-Category Minimum Supply Voltage Terminal Pitch Maximum Operating Temperature Minimum Analog Input Voltage Output Format Minimum Operating Temperature Terminal Finish Sample and Hold/Track and Hold Terminal Position Maximum Conversion Time JESD-30 Code Moisture Sensitivity Level (MSL) Maximum Seated Height Width Qualification Additional Features JESD-609 Code Maximum Time At Peak Reflow Temperature (s) Peak Reflow Temperature (C) Length Input Bit Code

ADS1252U/2K5

Texas Instruments

Analog To Digital Converter, Delta-Sigma

Industrial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

1

Yes

5.25 V

41 kHz

1

CMOS

24

0.0015 %

5 V

Offset Binary, 2's Complement Binary

5 V

Small Outline

SOP8,.25

Analog to Digital Converters

4.75 V

0.05 in (1.27 mm)

85 °C (185 °F)

-4.096 V

Serial

-40 °C (-40 °F)

Nickel Palladium Gold

Sample

Dual

25 µs

R-PDSO-G8

2

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e4

30 s

260 °C (500 °F)

0.193 in (4.9 mm)

ADS1258IPHPREP

Texas Instruments

Analog To Digital Converter, Delta-Sigma

Industrial

Gull Wing

48

HTFQFP

Square

Plastic/Epoxy

16

Yes

4.341 V

125 kHz

1

24

12 mA

0.001 %

2.5 V

2's Complement Binary

±2.5,3.3 V

-2.5 V

Flatpack, Heat Sink/Slug, Thin Profile, Fine Pitch

TQFP48,.35SQ

Analog to Digital Converters

2.7 V

0.02 in (0.5 mm)

105 °C (221 °F)

-4.341 V

Serial

-40 °C (-40 °F)

Nickel/Palladium/Gold

Quad

S-PQFP-G48

3

0.047 in (1.2 mm)

0.276 in (7 mm)

No

e4

260 °C (500 °F)

0.276 in (7 mm)

AD7685ARMZRL7

Analog Devices

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

10

TSSOP

Square

Plastic/Epoxy

1

Yes

5.5 V

250 kHz

1

CMOS

16

0.0092 %

5 V

Binary

3/5,5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP10,.19,20

Analog to Digital Converters

0.02 in (0.5 mm)

85 °C (185 °F)

0 mV

Serial

-40 °C (-40 °F)

Nickel Palladium Gold

Track

Dual

2.2 µs

S-PDSO-G10

1

0.043 in (1.1 mm)

0.118 in (3 mm)

No

e4

260 °C (500 °F)

0.118 in (3 mm)

ADC128S022CIMT/NOPB

Texas Instruments

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

16

TSSOP

Rectangular

Plastic/Epoxy

8

Yes

5.25 V

200 kHz

1

CMOS

12

2.3 mA

0.0244 %

3 V

Binary

3/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP16,.25

Analog to Digital Converters

2.7 V

0.026 in (0.65 mm)

105 °C (221 °F)

0 mV

Serial

-40 °C (-40 °F)

Matte Tin

Track

Dual

16.25 µs

R-PDSO-G16

1

0.043 in (1.1 mm)

0.173 in (4.4 mm)

No

e3

30 s

260 °C (500 °F)

0.197 in (5 mm)

LTC2449IUHF#PBF

Analog Devices

Analog To Digital Converter, Delta-Sigma

Industrial

No Lead

38

HVQCCN

Rectangular

Plastic/Epoxy

16

Yes

2.75 V

1

24

5 V

Binary

Chip Carrier, Heat Sink/Slug, Very Thin Profile

0.02 in (0.5 mm)

85 °C (185 °F)

-50 mV

Serial

-40 °C (-40 °F)

Matte Tin

Quad

170 ms

R-PQCC-N38

1

0.031 in (0.8 mm)

0.197 in (5 mm)

No

e3

30 s

260 °C (500 °F)

0.276 in (7 mm)

AD7684BRMZ

Analog Devices

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

1

Yes

5.5 V

100 kHz

1

CMOS

16

0.0046 %

3 V

2's Complement Binary

3/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.19

Analog to Digital Converters

0.026 in (0.65 mm)

85 °C (185 °F)

-2.7 V

Serial

-40 °C (-40 °F)

Nickel Palladium Gold

Track

Dual

S-PDSO-G8

1

0.043 in (1.1 mm)

0.118 in (3 mm)

No

e4

30 s

260 °C (500 °F)

0.118 in (3 mm)

LTC1857CG#TRPBF

Analog Devices

Analog To Digital Converter, Proprietary Method

Commercial

Gull Wing

28

SSOP

Rectangular

Plastic/Epoxy

8

Yes

10 V

100 kHz

1

12

0.0244 %

5 V

Offset Binary, 2's Complement Binary

Small Outline, Shrink Pitch

0.026 in (0.65 mm)

70 °C (158 °F)

-10 V

Serial

0 °C (32 °F)

Matte Tin

Sample

Dual

5 µs

R-PDSO-G28

1

0.079 in (2 mm)

0.209 in (5.3 mm)

No

e3

30 s

260 °C (500 °F)

0.402 in (10.2 mm)

MCP3204-CI/SL

Microchip Technology

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

14

SOP

Rectangular

Plastic/Epoxy

4

Yes

5 V

100 kHz

1

CMOS

TS 16949

12

0.0488 %

5 V

Binary

3/5 V

0 V

Small Outline

SOP14,.24

Analog to Digital Converters

0.05 in (1.27 mm)

85 °C (185 °F)

0 mV

Serial

-40 °C (-40 °F)

Matte Tin

Sample

Dual

6 µs

R-PDSO-G14

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e3

40 s

260 °C (500 °F)

0.341 in (8.65 mm)

ADS1278SHFQ

Texas Instruments

Analog To Digital Converter, Delta-Sigma

Military

Flat

84

HGQFF

Square

Ceramic, Metal-Sealed Cofired

8

Yes

5.25 V

144 kHz

1

24

185 mA

0.0014 %

5 V

2's Complement Binary

1.8,5 V

Flatpack, Heat Sink/Slug, Guard Ring

TPAK84,2.0SQ,20

Analog to Digital Converters

1.65 V

0.02 in (0.5 mm)

210 °C (410 °F)

-2.5 V

Parallel, 8 Bits

-55 °C (-67 °F)

Gold

Quad

S-CQFP-F84

0.105 in (2.67 mm)

0.394 in (10 mm)

No

0.394 in (10 mm)

ADS7884SDBVT

Texas Instruments

Analog To Digital Converter, Successive Approximation

Automotive

Gull Wing

6

LSSOP

Rectangular

Plastic/Epoxy

1

Yes

5.5 V

3 MHz

1

CMOS

10

4 mA

0.0781 %

3.3 V

Binary

3.3/5 V

Small Outline, Low Profile, Shrink Pitch

TSOP6,.11,37

Analog to Digital Converters

2.7 V

0.037 in (0.95 mm)

125 °C (257 °F)

0 mV

Parallel, Word

-40 °C (-40 °F)

Matte Tin

Sample

Dual

R-PDSO-G6

2

0.057 in (1.45 mm)

0.063 in (1.6 mm)

No

e3

30 s

260 °C (500 °F)

0.114 in (2.9 mm)

ADS1210U/1KG4

Texas Instruments

Analog To Digital Converter, Delta-Sigma

Industrial

Gull Wing

18

SOP

Rectangular

Plastic/Epoxy

4

Yes

10 V

1 kHz

1

24

0.0015 %

5 V

Offset Binary, 2's Complement Binary

5 V

Small Outline

SOP18,.4

Other Converters

0.05 in (1.27 mm)

85 °C (185 °F)

-10 V

Serial

-40 °C (-40 °F)

Nickel/Palladium/Gold

Sample

Dual

R-PDSO-G18

2

0.104 in (2.65 mm)

0.295 in (7.5 mm)

No

e4

260 °C (500 °F)

0.455 in (11.55 mm)

ADS1240EG4

Texas Instruments

Analog To Digital Converter, Delta-Sigma

Industrial

Gull Wing

24

SSOP

Rectangular

Plastic/Epoxy

4

Yes

5.25 V

15 Hz

1

CMOS

24

675 μA

0.0015 %

3 V

Binary

3/5 V

Small Outline, Shrink Pitch

SSOP24,.3

Other Converters

2.7 V

0.026 in (0.65 mm)

85 °C (185 °F)

-100 mV

Serial

-40 °C (-40 °F)

Nickel Palladium Gold

Dual

R-PDSO-G24

2

0.079 in (2 mm)

0.209 in (5.3 mm)

No

e4

30 s

260 °C (500 °F)

0.323 in (8.2 mm)

ADS8863IDGSR

Texas Instruments

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

10

TSSOP

Square

Plastic/Epoxy

1

Yes

5 V

680 kHz

1

16

1.8 mA

0.0015 %

3 V

Binary

3 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP10,.19,20

Analog to Digital Converters

1.65 V

0.02 in (0.5 mm)

85 °C (185 °F)

-2.5 V

Serial

-40 °C (-40 °F)

Nickel Palladium Gold

Sample

Dual

930 ns

S-PDSO-G10

2

0.043 in (1.1 mm)

0.118 in (3 mm)

No

e4

30 s

260 °C (500 °F)

0.118 in (3 mm)

ADS8588SIPMR

Texas Instruments

Analog To Digital Converter, Successive Approximation

Automotive

Gull Wing

64

LFQFP

Square

Plastic/Epoxy

8

Yes

10 V

200 kHz

1

16

24 mA

0.0023 %

5 V

2's Complement Binary

Flatpack, Low Profile, Fine Pitch

2.3 V

0.02 in (0.5 mm)

125 °C (257 °F)

-10 V

Serial, Parallel, 8 Bits

-40 °C (-40 °F)

Nickel Palladium Gold

Track

Quad

311 µs

S-PQFP-G64

3

0.063 in (1.6 mm)

0.394 in (10 mm)

e4

30 s

260 °C (500 °F)

0.394 in (10 mm)

MAX11254ATJ+

Analog Devices

Analog To Digital Converter, Delta-Sigma

Automotive

No Lead

32

HVQCCN

Square

6

Yes

3.6 V

64 kHz

1

CMOS

24

50 mA

0.0015 %

3.6 V

Offset Binary, 2's Complement Binary

Chip Carrier, Heat Sink/Slug, Very Thin Profile

LCC32,.2SQ,20

0.02 in (0.5 mm)

125 °C (257 °F)

-1.5 V

Serial

-40 °C (-40 °F)

Matte Tin - annealed

Quad

S-XQCC-N32

1

0.031 in (0.8 mm)

0.197 in (5 mm)

No

e3

30 s

260 °C (500 °F)

0.197 in (5 mm)

AD7779ACPZ-RL

Analog Devices

Analog To Digital Converter, Delta-Sigma

Automotive

No Lead

64

HVQCCN

Square

8

Yes

650 mV

1

24

1.65 V

Binary, 2's Complement Binary

-1.65 V

Chip Carrier, Heat Sink/Slug, Very Thin Profile

0.02 in (0.5 mm)

125 °C (257 °F)

-650 mV

Parallel, Word

-40 °C (-40 °F)

Matte Tin

Quad

3.4 ms

S-XQCC-N64

3

0.031 in (0.8 mm)

0.354 in (9 mm)

e3

0.354 in (9 mm)

ADS6442IRGCT

Texas Instruments

Analog To Digital Converter, Proprietary Method

Industrial

No Lead

64

HVQCCN

Square

Plastic/Epoxy

4

Yes

2 V

65 MHz

1

CMOS

14

0.0275 %

3.3 V

Binary, Offset Binary, 2's Complement Binary

3.3 V

Chip Carrier, Heat Sink/Slug, Very Thin Profile

LCC64,.35SQ,20

Analog to Digital Converters

0.02 in (0.5 mm)

85 °C (185 °F)

-2 V

Serial

-40 °C (-40 °F)

Nickel Palladium Gold

Sample

Quad

S-PQCC-N64

3

0.039 in (1 mm)

0.354 in (9 mm)

No

Peak-to-peak input voltage range: 2 V

e4

30 s

260 °C (500 °F)

0.354 in (9 mm)

AD7730BRUZ

Analog Devices

Analog To Digital Converter, Delta-Sigma

Industrial

Gull Wing

24

TSSOP

Rectangular

Plastic/Epoxy

2

Yes

80 mV

1

Bipolar

6

0.0018 %

5 V

Binary

3/5,5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP24,.25

Other Converters

0.026 in (0.65 mm)

85 °C (185 °F)

0 mV

Serial

-40 °C (-40 °F)

Matte Tin

Dual

R-PDSO-G24

1

0.047 in (1.2 mm)

0.173 in (4.4 mm)

No

e3

30 s

260 °C (500 °F)

0.307 in (7.8 mm)

ADS8863IDRCR

Texas Instruments

Analog To Digital Converter, Successive Approximation

Industrial

No Lead

10

HVSON

Square

Plastic/Epoxy

1

Yes

5 V

680 kHz

1

16

1.8 mA

0.0015 %

3 V

Binary

3 V

Small Outline, Heat Sink/Slug, Very Thin Profile

SOLCC10,.12,20

Analog to Digital Converters

1.65 V

0.02 in (0.5 mm)

85 °C (185 °F)

-2.5 V

Serial

-40 °C (-40 °F)

Nickel Palladium Gold

Sample

Dual

930 ns

S-PDSO-N10

2

0.039 in (1 mm)

0.118 in (3 mm)

No

e4

30 s

260 °C (500 °F)

0.118 in (3 mm)

ADAU1978WBCPZ

Analog Devices

Analog To Digital Converter, Delta-Sigma

Industrial

No Lead

40

HVQCCN

Square

4

Yes

1

CMOS

AEC-Q100

24

3.3 V

Binary

1.8,3.3 V

Chip Carrier, Heat Sink/Slug, Very Thin Profile

LCC40,.24SQ,20

Analog to Digital Converters

0.02 in (0.5 mm)

105 °C (221 °F)

Serial

-40 °C (-40 °F)

Quad

S-XQCC-N40

3

0.031 in (0.8 mm)

0.236 in (6 mm)

No

30 s

260 °C (500 °F)

0.236 in (6 mm)

ADS8320E/250G4

Texas Instruments

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

1

Yes

5.25 V

100 kHz

1

CMOS

16

0.018 %

2.7 V

Binary

3/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.19

Analog to Digital Converters

2.7 V

0.026 in (0.65 mm)

85 °C (185 °F)

0 mV

Serial

-40 °C (-40 °F)

Nickel Palladium Gold Silver

Sample

Dual

666.67 µs

S-PDSO-G8

2

0.043 in (1.1 mm)

0.118 in (3 mm)

No

e4

30 s

260 °C (500 °F)

0.118 in (3 mm)

AD7124-4BBCPZ-RL7

Analog Devices

Analog To Digital Converter, Delta-Sigma

Automotive

No Lead

32

HVQCCN

Square

4

Yes

1

24

0.0015 %

3 V

Offset Binary

Chip Carrier, Heat Sink/Slug, Very Thin Profile

0.02 in (0.5 mm)

125 °C (257 °F)

Serial

-40 °C (-40 °F)

Matte Tin

Quad

S-XQCC-N32

3

0.039 in (1 mm)

0.197 in (5 mm)

e3

260 °C (500 °F)

0.197 in (5 mm)

MAX14002AAP+

Analog Devices

Analog To Digital Converter, Proprietary Method

Automotive

Gull Wing

20

SSOP

Rectangular

Plastic/Epoxy

1

Yes

1.35 V

10 kHz

1

BICMOS

10

1.5 mA

0.0977 %

3.3 V

Binary

Small Outline, Shrink Pitch

SSOP20,.3

0.026 in (0.65 mm)

125 °C (257 °F)

0 mV

Serial

-40 °C (-40 °F)

Dual

R-PDSO-G20

0.078 in (1.99 mm)

0.208 in (5.29 mm)

30 s

260 °C (500 °F)

0.283 in (7.2 mm)

ADS1158IRTCT

Texas Instruments

Analog To Digital Converter, Delta-Sigma

Industrial

No Lead

48

HVQCCN

Square

Plastic/Epoxy

16

Yes

4.3417 V

125 kHz

1

16

12 mA

0.0015 %

2.5 V

2's Complement Binary

±2.5,3.3 V

-2.5 V

Chip Carrier, Heat Sink/Slug, Very Thin Profile

LCC48,.27SQ,20

Analog to Digital Converters

2.5 V

0.02 in (0.5 mm)

105 °C (221 °F)

-4.3417 V

Serial

-40 °C (-40 °F)

Nickel Palladium Gold

Quad

S-PQCC-N48

2

0.035 in (0.9 mm)

0.276 in (7 mm)

No

e4

30 s

260 °C (500 °F)

0.276 in (7 mm)

ADS1251U/2K5G4

Texas Instruments

Analog To Digital Converter, Delta-Sigma

Industrial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

1

Yes

5.25 V

20 kHz

1

CMOS

24

2 mA

0.0015 %

5 V

Offset Binary, 2's Complement Binary

5 V

Small Outline

SOP8,.25

Analog to Digital Converters

4.75 V

0.05 in (1.27 mm)

85 °C (185 °F)

-4.096 V

Serial

-40 °C (-40 °F)

Nickel Palladium Gold

Dual

50 µs

R-PDSO-G8

2

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e4

30 s

260 °C (500 °F)

0.193 in (4.9 mm)

JM38510/14002BXA

Analog Devices

Analog To Digital Converter, Successive Approximation

Military

Through-Hole

28

DIP

Rectangular

Ceramic, Metal-Sealed Cofired

1

No

1

12

30 mA

0.0122 %

15 V

Binary

-15 V

In-Line

0.1 in (2.54 mm)

125 °C (257 °F)

Parallel, Word

-55 °C (-67 °F)

Tin Lead

Dual

35 µs

R-CDIP-T28

0.225 in (5.72 mm)

0.6 in (15.24 mm)

No

e0

AD7124-4BBCPZ-RL

Analog Devices

Analog To Digital Converter, Delta-Sigma

Automotive

No Lead

32

HVQCCN

Square

4

Yes

1

24

0.0015 %

3 V

Offset Binary

Chip Carrier, Heat Sink/Slug, Very Thin Profile

0.02 in (0.5 mm)

125 °C (257 °F)

Serial

-40 °C (-40 °F)

Matte Tin

Quad

S-XQCC-N32

3

0.039 in (1 mm)

0.197 in (5 mm)

e3

30 s

260 °C (500 °F)

0.197 in (5 mm)

LTC2335HLX-16#PBF

Analog Devices

Analog To Digital Converter, Successive Approximation

Automotive

Gull Wing

48

LFQFP

Square

Plastic/Epoxy

8

Yes

10.2525 V

1 MHz

1

CMOS

16

0.0015 %

5 V

2's Complement Binary

Flatpack, Low Profile, Fine Pitch

0.02 in (0.5 mm)

125 °C (257 °F)

-10.2275 V

Serial

-40 °C (-40 °F)

Matte Tin

Sample

Quad

550 ns

S-PQFP-G48

0.063 in (1.6 mm)

0.276 in (7 mm)

e3

0.276 in (7 mm)

MCP3424T-E/SL

Microchip Technology

Analog To Digital Converter, Delta-Sigma

Automotive

Gull Wing

14

SOP

Rectangular

Plastic/Epoxy

2

Yes

2.048 V

2.4 kHz

1

TS 16949

18

180 μA

0.0035 %

5 V

2's Complement Binary

3/5 V

Small Outline

SOP14,.24

Analog to Digital Converters

0.05 in (1.27 mm)

125 °C (257 °F)

-2.048 V

Serial

-40 °C (-40 °F)

Matte Tin

Dual

R-PDSO-G14

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e3

40 s

260 °C (500 °F)

0.341 in (8.65 mm)

AD7367BRUZ-5-RL7

Analog Devices

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

24

TSSOP

Rectangular

Plastic/Epoxy

2

Yes

10 V

500 kHz

1

CMOS

14

0.0214 %

5 V

Binary

5,±5/±15 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP24,.25

Analog to Digital Converters

0.026 in (0.65 mm)

85 °C (185 °F)

-10 V

Serial

-40 °C (-40 °F)

Matte Tin

Track

Dual

1.25 µs

R-PDSO-G24

1

0.047 in (1.2 mm)

0.173 in (4.4 mm)

No

e3

30 s

260 °C (500 °F)

0.307 in (7.8 mm)

AD7656BSTZ-REEL

Analog Devices

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

64

LFQFP

Square

Plastic/Epoxy

6

Yes

12 V

250 kHz

1

CMOS

16

0.0046 %

5 V

2's Complement Binary

5,±5/±15 V

-5 V

Flatpack, Low Profile, Fine Pitch

QFP64,.47SQ,20

Analog to Digital Converters

0.02 in (0.5 mm)

85 °C (185 °F)

-10 V

Serial, Parallel, Word

-40 °C (-40 °F)

Matte Tin

Track

Quad

3.1 µs

S-PQFP-G64

3

0.063 in (1.6 mm)

0.394 in (10 mm)

No

e3

260 °C (500 °F)

0.394 in (10 mm)

AD7991YRJZ-0500RL7

Analog Devices

Analog To Digital Converter, Successive Approximation

Automotive

Gull Wing

8

LSSOP

Rectangular

Plastic/Epoxy

4

Yes

5.5 V

1

12

0.0244 %

3.3 V

Binary

3/5 V

Small Outline, Low Profile, Shrink Pitch

TSSOP8,.1

Analog to Digital Converters

0.026 in (0.65 mm)

125 °C (257 °F)

0 mV

Serial

-40 °C (-40 °F)

Nickel Palladium Gold

Track

Dual

R-PDSO-G8

1

0.057 in (1.45 mm)

0.063 in (1.6 mm)

No

e4

260 °C (500 °F)

0.114 in (2.9 mm)

LTC1859IG

Analog Devices

Analog To Digital Converter, Proprietary Method

Industrial

Gull Wing

28

SSOP

Rectangular

Plastic/Epoxy

8

Yes

10 V

100 kHz

1

16

0.0046 %

5 V

Offset Binary, 2's Complement Binary

Small Outline, Shrink Pitch

0.026 in (0.65 mm)

85 °C (185 °F)

-10 V

Serial

-40 °C (-40 °F)

Tin/Lead

Sample

Dual

5 µs

R-PDSO-G28

1

0.079 in (2 mm)

0.209 in (5.3 mm)

No

e0

0.402 in (10.2 mm)

AD9446BSVZ-80

Analog Devices

Analog To Digital Converter, Proprietary Method

Industrial

Gull Wing

100

HTFQFP

Square

Plastic/Epoxy

1

Yes

80 MHz

1

BICMOS

16

0.0076 %

3.3 V

Offset Binary, 2's Complement Binary

3.3,5 V

Flatpack, Heat Sink/Slug, Thin Profile, Fine Pitch

TQFP100,.63SQ

Analog to Digital Converters

0.02 in (0.5 mm)

85 °C (185 °F)

Parallel, Word

-40 °C (-40 °F)

Matte Tin

Track

Quad

S-PQFP-G100

3

0.047 in (1.2 mm)

0.551 in (14 mm)

No

e3

30 s

260 °C (500 °F)

0.551 in (14 mm)

LTC1856IG#PBF

Analog Devices

Analog To Digital Converter, Proprietary Method

Industrial

Gull Wing

28

SSOP

Rectangular

Plastic/Epoxy

8

Yes

10 V

100 kHz

1

14

0.0183 %

5 V

2's Complement Binary

Small Outline, Shrink Pitch

0.026 in (0.65 mm)

85 °C (185 °F)

-10 V

Serial

-40 °C (-40 °F)

Matte Tin

Sample

Dual

5 µs

R-PDSO-G28

1

0.079 in (2 mm)

0.209 in (5.3 mm)

No

e3

30 s

260 °C (500 °F)

0.402 in (10.2 mm)

LTC2335HLX-18#PBF

Analog Devices

Analog To Digital Converter, Successive Approximation

Automotive

Gull Wing

48

LFQFP

Square

Plastic/Epoxy

8

Yes

10.2525 V

1 MHz

1

CMOS

18

0.0015 %

5 V

2's Complement Binary

Flatpack, Low Profile, Fine Pitch

0.02 in (0.5 mm)

125 °C (257 °F)

-10.2275 V

Serial

-40 °C (-40 °F)

Matte Tin

Sample

Quad

550 ns

S-PQFP-G48

0.063 in (1.6 mm)

0.276 in (7 mm)

e3

0.276 in (7 mm)

LTC2335ILX-18#PBF

Analog Devices

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

48

LFQFP

Square

Plastic/Epoxy

8

Yes

10.2525 V

1 MHz

1

CMOS

18

0.0015 %

5 V

2's Complement Binary

Flatpack, Low Profile, Fine Pitch

0.02 in (0.5 mm)

85 °C (185 °F)

-10.2275 V

Serial

-40 °C (-40 °F)

Matte Tin

Sample

Quad

550 ns

S-PQFP-G48

0.063 in (1.6 mm)

0.276 in (7 mm)

e3

0.276 in (7 mm)

AD7998BRUZ-1

Analog Devices

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

20

TSSOP

Rectangular

Plastic/Epoxy

8

Yes

5.5 V

188 kHz

1

12

0.0244 %

3 V

Binary

3/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP20,.25

Analog to Digital Converters

0.026 in (0.65 mm)

85 °C (185 °F)

0 mV

Serial

-40 °C (-40 °F)

Matte Tin

Track

Dual

R-PDSO-G20

1

0.047 in (1.2 mm)

0.173 in (4.4 mm)

No

e3

30 s

260 °C (500 °F)

0.256 in (6.5 mm)

AD7323BRUZ

Analog Devices

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

16

TSSOP

Rectangular

Plastic/Epoxy

4

Yes

10 V

500 kHz

1

CMOS

12

0.0269 %

5 V

Binary, 2's Complement Binary

3/5,±15 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP16,.25

Analog to Digital Converters

0.026 in (0.65 mm)

85 °C (185 °F)

-10 V

Serial

-40 °C (-40 °F)

Matte Tin

Track

Dual

1.6 µs

R-PDSO-G16

1

0.047 in (1.2 mm)

0.173 in (4.4 mm)

No

e3

30 s

260 °C (500 °F)

0.197 in (5 mm)

ADS1251U/2K5

Texas Instruments

Analog To Digital Converter, Delta-Sigma

Industrial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

1

Yes

5.25 V

20 kHz

1

CMOS

24

2 mA

0.0015 %

5 V

Offset Binary, 2's Complement Binary

5 V

Small Outline

SOP8,.25

Analog to Digital Converters

4.75 V

0.05 in (1.27 mm)

85 °C (185 °F)

-4.096 V

Serial

-40 °C (-40 °F)

Nickel Palladium Gold

Dual

50 µs

R-PDSO-G8

2

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e4

30 s

260 °C (500 °F)

0.193 in (4.9 mm)

ADS5444IPFP

Texas Instruments

Analog To Digital Converter, Proprietary Method

Industrial

Gull Wing

80

HTFQFP

Square

Plastic/Epoxy

1

Yes

2.2 V

250 MHz

1

Bipolar

13

390 mA

0.0269 %

5 V

Offset Binary

3.3,5 V

Flatpack, Heat Sink/Slug, Thin Profile, Fine Pitch

TQFP80,.55SQ

Analog to Digital Converters

0.02 in (0.5 mm)

85 °C (185 °F)

-2.2 V

Parallel, Word

-40 °C (-40 °F)

Nickel Palladium Gold

Track

Quad

S-PQFP-G80

4

0.047 in (1.2 mm)

0.472 in (12 mm)

No

Peak-to-peak input voltage range: 2.2 V

e4

30 s

260 °C (500 °F)

0.472 in (12 mm)

MAX11613EUA+T

Analog Devices

Analog To Digital Converter, Proprietary Method

Industrial

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

4

Yes

1.8 V

1

BICMOS

12

0.0244 %

3 V

2's Complement Binary

Small Outline, Thin Profile, Shrink Pitch

0.026 in (0.65 mm)

85 °C (185 °F)

0 mV

Serial

-40 °C (-40 °F)

Nickel Gold Palladium

Track

Dual

7.5 µs

S-PDSO-G8

1

0.043 in (1.1 mm)

0.118 in (3 mm)

30 s

260 °C (500 °F)

0.118 in (3 mm)

MCP3021A7T-E/OT

Microchip Technology

Analog To Digital Converter, Successive Approximation

Automotive

Gull Wing

5

LSSOP

Rectangular

Plastic/Epoxy

1

Yes

5.8 V

22.3 kHz

1

CMOS

TS 16949

10

250 μA

0.0977 %

5 V

Binary

3/5 V

Small Outline, Low Profile, Shrink Pitch

TSOP5/6,.11,37

Analog to Digital Converters

0.037 in (0.95 mm)

125 °C (257 °F)

-300 mV

Serial

-40 °C (-40 °F)

Matte Tin

Sample

Dual

8.96 µs

R-PDSO-G5

1

0.057 in (1.45 mm)

0.064 in (1.63 mm)

No

e3

260 °C (500 °F)

0.116 in (2.95 mm)

MCP3221A6T-E/OT

Microchip Technology

Analog To Digital Converter, Successive Approximation

Automotive

Gull Wing

5

LSSOP

Rectangular

Plastic/Epoxy

1

Yes

5.8 V

22.3 kHz

1

CMOS

TS 16949

12

250 μA

0.0488 %

5 V

Binary

3/5 V

Small Outline, Low Profile, Shrink Pitch

TSOP5/6,.11,37

Analog to Digital Converters

0.037 in (0.95 mm)

125 °C (257 °F)

-300 mV

Serial

-40 °C (-40 °F)

Matte Tin

Sample

Dual

R-PDSO-G5

1

0.057 in (1.45 mm)

0.064 in (1.63 mm)

No

e3

260 °C (500 °F)

0.116 in (2.95 mm)

AD7367BRUZ-5

Analog Devices

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

24

TSSOP

Rectangular

Plastic/Epoxy

2

Yes

10 V

500 kHz

1

CMOS

14

0.0214 %

5 V

Binary

5,±5/±15 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP24,.25

Analog to Digital Converters

0.026 in (0.65 mm)

85 °C (185 °F)

-10 V

Serial

-40 °C (-40 °F)

Matte Tin

Track

Dual

1.25 µs

R-PDSO-G24

1

0.047 in (1.2 mm)

0.173 in (4.4 mm)

No

e3

30 s

260 °C (500 °F)

0.307 in (7.8 mm)

AD7710ARZ

Analog Devices

Analog To Digital Converter, Delta-Sigma

Industrial

Gull Wing

24

SOP

Rectangular

Plastic/Epoxy

2

Yes

2.5 V

1

CMOS

24

0.003 %

5 V

Binary, Offset Binary

±5/10 V

-5 V

Small Outline

SOP24,.4

Analog to Digital Converters

0.05 in (1.27 mm)

85 °C (185 °F)

-2.5 V

Serial

-40 °C (-40 °F)

Matte Tin

Sample

Dual

R-PDSO-G24

3

0.104 in (2.65 mm)

0.295 in (7.5 mm)

No

e3

30 s

260 °C (500 °F)

0.606 in (15.4 mm)

ADS1018IRUGR

Texas Instruments

Analog To Digital Converter, Delta-Sigma

Automotive

No Lead

10

VQCCN

Rectangular

Plastic/Epoxy

4

Yes

5.5 V

3.3 kHz

1

12

0.0122 %

3.3 V

2's Complement Binary

Chip Carrier, Very Thin Profile

2 V

0.02 in (0.5 mm)

125 °C (257 °F)

0 mV

Serial

-40 °C (-40 °F)

Nickel Palladium Gold

Quad

R-PQCC-N10

1

0.016 in (0.4 mm)

0.059 in (1.5 mm)

e4

30 s

260 °C (500 °F)

0.079 in (2 mm)

ADS7841ESQDBQRQ1

Texas Instruments

Analog To Digital Converter, Successive Approximation

Automotive

Gull Wing

16

SSOP

Rectangular

Plastic/Epoxy

4

Yes

5.25 V

200 kHz

1

CMOS

AEC-Q100

12

0.0488 %

5 V

Binary

2.7/5 V

Small Outline, Shrink Pitch

SSOP16,.25

Analog to Digital Converters

2.7 V

0.025 in (0.635 mm)

125 °C (257 °F)

0 mV

Serial

-40 °C (-40 °F)

Nickel Palladium Gold

Sample

Dual

3.75 µs

R-PDSO-G16

3

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e4

30 s

260 °C (500 °F)

0.193 in (4.9 mm)

Analog-to-Digital Converters

Analog-to-digital converters (ADCs) are electronic devices that convert continuous analog signals into digital signals, which can be processed by digital circuits, microcontrollers, or computers. ADCs are essential components in many electronic systems, as they allow the measurement and processing of physical signals, such as temperature, pressure, light, and sound.

ADCs work by sampling the analog signal at regular intervals and quantizing the sampled signal into a series of digital values. The sampling rate and the resolution of the ADC determine the accuracy and the bandwidth of the digital signal. ADCs may also include features such as amplification, filtering, or signal conditioning, to improve the accuracy and stability of the digital signal.

ADCs can be classified based on their architecture and their application. The most common types of ADCs are successive approximation ADCs, delta-sigma ADCs, and pipeline ADCs. Each type has its advantages and limitations, depending on the application and the required performance.

ADCs are used in a wide range of applications, from consumer electronics, such as smartphones and digital cameras, to industrial automation, medical devices, and scientific instruments. They play a crucial role in the conversion of physical signals into digital signals, allowing the processing, storage, and transmission of data in electronic systems.

Overall, ADCs are essential components in many electronic systems, providing the necessary signal conversion for a wide range of applications. Their accuracy, speed, and resolution determine the performance and the functionality of many electronic devices and systems.