Analog-to-Digital Converters

Reset All
Part RoHS Manufacturer Converter Type Temperature Grade Terminal Form No. of Terminals Package Code Package Shape Total Dose (V) Package Body Material No. of Analog In Channels Surface Mount Maximum Supply Voltage Maximum Analog Input Voltage Sample Rate No. of Functions Technology Screening Level Nominal Bandwidth No. of Bits Maximum Supply Current Maximum Linearity Error (EL) Nominal Supply Voltage Output Bit Code Power Supplies (V) Nominal Negative Supply Voltage Package Style (Meter) Package Equivalence Code Sub-Category Minimum Supply Voltage Terminal Pitch Maximum Operating Temperature Minimum Analog Input Voltage Output Format Minimum Operating Temperature Terminal Finish Sample and Hold/Track and Hold Terminal Position Maximum Conversion Time JESD-30 Code Moisture Sensitivity Level (MSL) Maximum Seated Height Width Qualification Additional Features JESD-609 Code Maximum Time At Peak Reflow Temperature (s) Peak Reflow Temperature (C) Length Input Bit Code

ADC121S021CIMF/NOPB

Texas Instruments

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

6

LSSOP

Rectangular

Plastic/Epoxy

1

Yes

5.25 V

200 kHz

1

CMOS

12

2.8 mA

0.0244 %

3 V

Binary

3/5 V

Small Outline, Low Profile, Shrink Pitch

TSOP6,.11,37

Analog to Digital Converters

2.7 V

0.037 in (0.95 mm)

85 °C (185 °F)

0 mV

Serial

-40 °C (-40 °F)

Matte Tin

Track

Dual

R-PDSO-G6

1

0.057 in (1.45 mm)

0.063 in (1.6 mm)

No

e3

30 s

260 °C (500 °F)

0.114 in (2.9 mm)

ADS114S06BIRHBT

Texas Instruments

Analog To Digital Converter, Delta-Sigma

Automotive

No Lead

32

HVQCCN

Square

Plastic/Epoxy

6

Yes

5.2 V

4 kHz

1

CMOS

16

0.0025 %

3.3 V

Binary, 2's Complement Binary

Chip Carrier, Heat Sink/Slug, Very Thin Profile

2.7 V

0.02 in (0.5 mm)

125 °C (257 °F)

-500 mV

Serial

-40 °C (-40 °F)

Nickel/Palladium/Gold

Quad

406 ns

S-PQCC-N32

3

0.039 in (1 mm)

0.197 in (5 mm)

e4

260 °C (500 °F)

0.197 in (5 mm)

ADS1242IPWTG4

Texas Instruments

Analog To Digital Converter, Delta-Sigma

Industrial

Gull Wing

16

TSSOP

Rectangular

Plastic/Epoxy

4

Yes

1.25 V

1

CMOS

24

0.0015 %

3 V

Binary

3/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP16,.25

Other Converters

0.026 in (0.65 mm)

85 °C (185 °F)

0 mV

Serial

-40 °C (-40 °F)

Nickel Palladium Gold

Dual

R-PDSO-G16

1

0.047 in (1.2 mm)

0.173 in (4.4 mm)

No

e4

30 s

260 °C (500 °F)

0.197 in (5 mm)

ADS1250U

Texas Instruments

Analog To Digital Converter, Delta-Sigma

Industrial

Gull Wing

16

SOP

Rectangular

Plastic/Epoxy

1

Yes

4.196 V

25 kHz

1

CMOS

20

0.002 %

5 V

2's Complement Binary

5 V

Small Outline

SOP16,.4

Analog to Digital Converters

4.75 V

0.05 in (1.27 mm)

85 °C (185 °F)

-4.096 V

Serial

-40 °C (-40 °F)

Nickel Palladium Gold

Sample

Dual

R-PDSO-G16

2

0.104 in (2.65 mm)

0.295 in (7.5 mm)

No

e4

30 s

260 °C (500 °F)

0.406 in (10.3 mm)

ADS7816UB/2K5G4

Texas Instruments

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

1

Yes

5 V

200 kHz

1

CMOS

12

0.0488 %

5 V

Binary

5 V

Small Outline

SOP8,.25

Analog to Digital Converters

0.05 in (1.27 mm)

85 °C (185 °F)

0 mV

Serial

-40 °C (-40 °F)

Nickel Palladium Gold

Sample

Dual

3.75 µs

R-PDSO-G8

2

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e4

30 s

260 °C (500 °F)

0.193 in (4.9 mm)

ADS8319IDGST

Texas Instruments

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

10

TSSOP

Square

Plastic/Epoxy

1

Yes

5.5 V

500 kHz

1

16

4.5 mA

0.0038 %

5 V

Binary

3.3,5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP10,.19,20

Analog to Digital Converters

2.375 V

0.02 in (0.5 mm)

85 °C (185 °F)

0 mV

Serial

-40 °C (-40 °F)

Matte Tin

Sample

Dual

1.4 µs

S-PDSO-G10

2

0.043 in (1.1 mm)

0.118 in (3 mm)

No

e3

30 s

260 °C (500 °F)

0.118 in (3 mm)

ADS8685IPW

Texas Instruments

Analog To Digital Converter, Successive Approximation

Automotive

Gull Wing

16

TSSOP

Rectangular

Plastic/Epoxy

1

Yes

12.288 V

500 kHz

1

16

10.5 mA

0.0018 %

5 V

Binary

Small Outline, Thin Profile, Shrink Pitch

1.65 V

0.026 in (0.65 mm)

125 °C (257 °F)

-12.288 V

Serial

-40 °C (-40 °F)

Nickel/Palladium/Gold

Sample

Dual

1 µs

R-PDSO-G16

3

0.047 in (1.2 mm)

0.173 in (4.4 mm)

e4

30 s

260 °C (500 °F)

0.197 in (5 mm)

ADS8860IDRCR

Texas Instruments

Analog To Digital Converter, Successive Approximation

Industrial

No Lead

10

HVSON

Square

Plastic/Epoxy

1

Yes

5 V

1 MHz

1

16

2.4 mA

0.0031 %

3 V

Binary

3 V

Small Outline, Heat Sink/Slug, Very Thin Profile

SOLCC10,.12,20

Analog to Digital Converters

1.65 V

0.02 in (0.5 mm)

85 °C (185 °F)

0 mV

Serial

-40 °C (-40 °F)

Nickel Palladium Gold

Sample

Dual

710 ns

S-PDSO-N10

2

0.039 in (1 mm)

0.118 in (3 mm)

No

e4

30 s

260 °C (500 °F)

0.118 in (3 mm)

LTC2408CG#TRPBF

Analog Devices

Analog To Digital Converter, Delta-Sigma

Commercial

Gull Wing

28

SSOP

Rectangular

Plastic/Epoxy

8

Yes

6.1875 V

1

CMOS

24

0 %

3 V

Binary

Small Outline, Shrink Pitch

0.026 in (0.65 mm)

70 °C (158 °F)

-12.5 mV

Serial

0 °C (32 °F)

Matte Tin

Dual

163.2 ms

R-PDSO-G28

1

0.079 in (2 mm)

0.209 in (5.3 mm)

No

e3

30 s

260 °C (500 °F)

0.402 in (10.2 mm)

LTC2424CG#PBF

Analog Devices

Analog To Digital Converter, Delta-Sigma

Commercial

Gull Wing

28

SSOP

Rectangular

Plastic/Epoxy

4

Yes

3.7125 V

1

20

3.3 V

Binary

Small Outline, Shrink Pitch

0.026 in (0.65 mm)

70 °C (158 °F)

-412.5 mV

Serial

0 °C (32 °F)

Matte Tin

Dual

163.44 ms

R-PDSO-G28

1

0.079 in (2 mm)

0.209 in (5.3 mm)

No

e3

30 s

260 °C (500 °F)

0.402 in (10.2 mm)

LTC2470CMS#PBF

Analog Devices

Analog To Digital Converter, Delta-Sigma

Commercial

Gull Wing

12

TSSOP

Rectangular

Plastic/Epoxy

2

Yes

1.253 V

250 Hz

1

CMOS

16

0.013 %

Binary

Small Outline, Thin Profile, Shrink Pitch

0.026 in (0.65 mm)

70 °C (158 °F)

0 mV

Serial

0 °C (32 °F)

Matte Tin - annealed

Dual

4.8 ms

R-PDSO-G12

1

0.043 in (1.1 mm)

0.118 in (3 mm)

No

e3

30 s

260 °C (500 °F)

0.159 in (4.039 mm)

LTC2485CDD

Analog Devices

Analog To Digital Converter, Delta-Sigma

Commercial

No Lead

10

HVSSON

Rectangular

Plastic/Epoxy

1

Yes

7.5 Hz

1

Bipolar

24

5 V

Binary, 2's Complement Binary

Small Outline, Heat Sink/Slug, Very Thin Profile, Shrink Pitch

0.02 in (0.5 mm)

70 °C (158 °F)

Serial

0 °C (32 °F)

Tin/Lead

Dual

163.5 ms

R-PDSO-N10

1

0.031 in (0.8 mm)

0.118 in (3 mm)

No

e0

0.118 in (3 mm)

LTC2487IDE#TRPBF

Analog Devices

Analog To Digital Converter, Delta-Sigma

Industrial

No Lead

14

HVSON

Rectangular

Plastic/Epoxy

4

Yes

5.5 V

1

16

0.002 %

5 V

2's Complement Binary

Small Outline, Heat Sink/Slug, Very Thin Profile

0.02 in (0.5 mm)

85 °C (185 °F)

0 mV

Parallel, Word

-40 °C (-40 °F)

Matte Tin

Dual

163.5 ms

R-PDSO-N14

1

0.031 in (0.8 mm)

0.118 in (3 mm)

No

e3

30 s

260 °C (500 °F)

0.157 in (4 mm)

MAX1300BEUG

Maxim Integrated

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

24

TSSOP

Rectangular

Plastic/Epoxy

8

Yes

24.576 V

115 kHz

1

BICMOS

16

0.0061 %

5 V

Offset Binary

5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP24,.25

Analog to Digital Converters

0.026 in (0.65 mm)

85 °C (185 °F)

-24.576 V

Serial

-40 °C (-40 °F)

Tin Lead

Track

Dual

9.4 µs

R-PDSO-G24

1

0.043 in (1.1 mm)

0.173 in (4.4 mm)

No

e0

245 °C (473 °F)

0.307 in (7.8 mm)

MAX1300BEUG+

Analog Devices

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

24

TSSOP

Rectangular

Plastic/Epoxy

8

Yes

24.576 V

115 kHz

1

BICMOS

16

0.0061 %

5 V

Offset Binary

5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP24,.25

Analog to Digital Converters

0.026 in (0.65 mm)

85 °C (185 °F)

-24.576 V

Serial

-40 °C (-40 °F)

Matte Tin - annealed

Track

Dual

9.4 µs

R-PDSO-G24

1

0.043 in (1.1 mm)

0.173 in (4.4 mm)

No

e3

30 s

260 °C (500 °F)

0.307 in (7.8 mm)

AD7091RBRMZ-RL7

Analog Devices

Analog To Digital Converter, Successive Approximation

Automotive

Gull Wing

10

TSSOP

Square

Plastic/Epoxy

1

Yes

2.525 V

1 MHz

1

CMOS

12

0.0244 %

3 V

Binary

3/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP10,.19,20

Analog to Digital Converters

0.02 in (0.5 mm)

125 °C (257 °F)

0 mV

Serial

-40 °C (-40 °F)

Matte Tin

Track

Dual

650 ns

S-PDSO-G10

1

0.043 in (1.1 mm)

0.118 in (3 mm)

No

e3

30 s

260 °C (500 °F)

0.118 in (3 mm)

AD7403BRIZ-RL7

Analog Devices

Analog To Digital Converter, Delta-Sigma

Automotive

Gull Wing

16

SOP

Rectangular

Plastic/Epoxy

1

Yes

320 mV

20 MHz

1

CMOS

16

0.0183 %

5 V

Binary

Small Outline

0.05 in (1.27 mm)

125 °C (257 °F)

-320 mV

Serial

-40 °C (-40 °F)

Matte Tin

Dual

R-PDSO-G16

3

0.104 in (2.64 mm)

0.295 in (7.5 mm)

e3

30 s

260 °C (500 °F)

0.502 in (12.75 mm)

AD7674ASTZ

Analog Devices

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

48

LFQFP

Square

Plastic/Epoxy

1

Yes

4.15 V

800 kHz

1

CMOS

18

0.001 %

5 V

Binary, 2's Complement Binary

3/5,5 V

Flatpack, Low Profile, Fine Pitch

QFP48,.35SQ,20

Analog to Digital Converters

0.02 in (0.5 mm)

85 °C (185 °F)

-4.05 V

Serial, Parallel, Word

-40 °C (-40 °F)

Matte Tin

Sample

Quad

1 ms

S-PQFP-G48

3

0.063 in (1.6 mm)

0.276 in (7 mm)

No

e3

30 s

260 °C (500 °F)

0.276 in (7 mm)

AD7785BRUZ-REEL

Analog Devices

Analog To Digital Converter, Delta-Sigma

Industrial

Gull Wing

16

TSSOP

Rectangular

Plastic/Epoxy

3

Yes

5.25 V

1

20

3 V

Offset Binary

3/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP16,.25

Other Converters

0.026 in (0.65 mm)

105 °C (221 °F)

Serial

-40 °C (-40 °F)

Matte Tin

Dual

R-PDSO-G16

1

0.047 in (1.2 mm)

0.173 in (4.4 mm)

No

e3

30 s

260 °C (500 °F)

0.197 in (5 mm)

ADS1100A1IDBVT

Texas Instruments

Analog To Digital Converter, Delta-Sigma

Industrial

Gull Wing

6

LSSOP

Rectangular

Plastic/Epoxy

1

Yes

5.5 V

128 Hz

1

16

150 μA

0.0125 %

5 V

2's Complement Binary

5 V

Small Outline, Low Profile, Shrink Pitch

TSOP6,.11,37

Analog to Digital Converters

2.7 V

0.037 in (0.95 mm)

85 °C (185 °F)

-2.5 V

Serial

-40 °C (-40 °F)

Nickel Palladium Gold

Dual

5.43478 ms

R-PDSO-G6

1

0.057 in (1.45 mm)

0.063 in (1.6 mm)

No

e4

30 s

260 °C (500 °F)

0.114 in (2.9 mm)

ADS1250UG4

Texas Instruments

Analog To Digital Converter, Delta-Sigma

Industrial

Gull Wing

16

SOP

Rectangular

Plastic/Epoxy

1

Yes

4.096 V

25 kHz

1

20

0.002 %

5 V

2's Complement Binary

5 V

Small Outline

SOP16,.4

Analog to Digital Converters

0.05 in (1.27 mm)

85 °C (185 °F)

-4.096 V

Serial

-40 °C (-40 °F)

Nickel Palladium Gold

Sample

Dual

R-PDSO-G16

2

0.104 in (2.65 mm)

0.295 in (7.5 mm)

No

e4

30 s

260 °C (500 °F)

0.406 in (10.3 mm)

ADS131M06IPBS

Texas Instruments

Analog To Digital Converter, Delta-Sigma

Automotive

No Lead

32

TFQFP

Square

Plastic/Epoxy

6

Yes

3.6 V

32 kHz

1

24

5.9 mA

3 V

2's Complement Binary

Flatpack, Thin Profile, Fine Pitch

TQFP32,.20SQ

1.65 V

0.02 in (0.5 mm)

125 °C (257 °F)

-1.3 V

Serial

-40 °C (-40 °F)

Nickel Palladium Gold

Quad

S-PQFP-G32

2

0.047 in (1.2 mm)

0.197 in (5 mm)

e4

30 s

260 °C (500 °F)

0.197 in (5 mm)

ADS7843E/2K5

Texas Instruments

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

16

SSOP

Rectangular

Plastic/Epoxy

4

Yes

5 V

125 kHz

1

CMOS

12

650 μA

0.0488 %

2.7 V

Binary

2.7 V

Small Outline, Shrink Pitch

SSOP16,.25

Analog to Digital Converters

0.025 in (0.635 mm)

85 °C (185 °F)

0 mV

Serial

-40 °C (-40 °F)

Nickel Palladium Gold

Sample

Dual

6 µs

R-PDSO-G16

2

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e4

30 s

260 °C (500 °F)

0.193 in (4.89 mm)

ADS7945SRTER

Texas Instruments

Analog To Digital Converter, Successive Approximation

Automotive

No Lead

16

HVQCCN

Square

Plastic/Epoxy

2

Yes

5.25 V

2 MHz

1

CMOS

14

5 mA

0.0092 %

5 V

Binary

1.8/5,3/5 V

Chip Carrier, Heat Sink/Slug, Very Thin Profile

LCC16,.12SQ,20

Analog to Digital Converters

1.65 V

0.02 in (0.5 mm)

125 °C (257 °F)

-2.5 V

Serial

-40 °C (-40 °F)

Nickel Palladium Gold

Sample

Quad

400 ns

S-PQCC-N16

2

0.031 in (0.8 mm)

0.118 in (3 mm)

No

e4

30 s

260 °C (500 °F)

0.118 in (3 mm)

ADS8329IBRSATG4

Texas Instruments

Analog To Digital Converter, Successive Approximation

Industrial

No Lead

16

HVQCCN

Square

Plastic/Epoxy

1

Yes

5 V

1 MHz

1

CMOS

16

6.1 mA

0.0027 %

5 V

Binary

3.3,5 V

Chip Carrier, Heat Sink/Slug, Very Thin Profile

LCC16,.16SQ,25

Analog to Digital Converters

1.65 V

0.026 in (0.65 mm)

85 °C (185 °F)

0 mV

Serial

-40 °C (-40 °F)

Nickel/Palladium/Gold

Sample

Quad

786 ns

S-PQCC-N16

2

0.039 in (1 mm)

0.157 in (4 mm)

No

e4

260 °C (500 °F)

0.157 in (4 mm)

AMC1303E2520DWV

Texas Instruments

Analog To Digital Converter, Delta-Sigma

Automotive

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

1

Yes

250 mV

78 kHz

1

16

9.8 mA

0.0061 %

5 V

Binary

Small Outline

0.05 in (1.27 mm)

125 °C (257 °F)

-250 mV

Serial

-40 °C (-40 °F)

Nickel Palladium Gold

Dual

R-PDSO-G8

3

0.11 in (2.8 mm)

0.23 in (5.85 mm)

Peak-to-peak input voltage range: 250 mV

e4

30 s

260 °C (500 °F)

0.295 in (7.5 mm)

CS5343-CZZ

Cirrus Logic

Analog To Digital Converter, Delta-Sigma

Industrial

Gull Wing

10

TSSOP

Square

Plastic/Epoxy

2

Yes

1.8975 V

108 kHz

1

24

3.3 V

2's Complement Binary

3.3/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP10,.19,20

Analog to Digital Converters

0.02 in (0.5 mm)

85 °C (185 °F)

1.848 V

Serial

-40 °C (-40 °F)

Matte Tin

Dual

S-PDSO-G10

2

0.043 in (1.1 mm)

0.118 in (3 mm)

No

e3

260 °C (500 °F)

0.118 in (3 mm)

LTC1864AIMS8#PBF

Analog Devices

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

1

Yes

5.25 V

250 kHz

1

16

0.0092 %

5 V

Binary

Small Outline, Thin Profile, Shrink Pitch

0.026 in (0.65 mm)

85 °C (185 °F)

0 mV

Serial

-40 °C (-40 °F)

Matte Tin

Sample

Dual

3.2 µs

S-PDSO-G8

1

0.043 in (1.1 mm)

0.118 in (3 mm)

No

e3

30 s

260 °C (500 °F)

0.118 in (3 mm)

LTC2433-1IMS

Analog Devices

Analog To Digital Converter, Delta-Sigma

Industrial

Gull Wing

10

TSSOP

Square

Plastic/Epoxy

1

Yes

5.8 V

1

16

0.0019 %

5 V

Binary

Small Outline, Thin Profile, Shrink Pitch

0.02 in (0.5 mm)

85 °C (185 °F)

-300 mV

Serial

-40 °C (-40 °F)

Tin/Lead

Dual

149.6 ms

S-PDSO-G10

1

0.043 in (1.1 mm)

0.118 in (3 mm)

No

e0

0.118 in (3 mm)

LTC2439-1IGN#TRPBF

Analog Devices

Analog To Digital Converter, Delta-Sigma

Industrial

Gull Wing

28

SSOP

Rectangular

Plastic/Epoxy

16

Yes

2.75 V

1

16

0.0019 %

5 V

Binary

Small Outline, Shrink Pitch

0.025 in (0.635 mm)

85 °C (185 °F)

-2.75 V

Serial

-40 °C (-40 °F)

Matte Tin

Dual

149.6 ms

R-PDSO-G28

1

0.069 in (1.748 mm)

0.154 in (3.899 mm)

No

e3

30 s

260 °C (500 °F)

0.389 in (9.893 mm)

AD7124-4TRUZ-EP-R7

Analog Devices

Analog To Digital Converter, Delta-Sigma

Military

Gull Wing

24

TSSOP

Rectangular

Plastic/Epoxy

4

Yes

3.6 V

1

24

1.2 mA

0.0015 %

3 V

Offset Binary

Small Outline, Thin Profile, Shrink Pitch

TSSOP24,.25

0.026 in (0.65 mm)

125 °C (257 °F)

2.7 V

Serial

-55 °C (-67 °F)

Nickel Palladium Gold

Dual

R-PDSO-G24

1

0.047 in (1.2 mm)

0.173 in (4.4 mm)

e4

30 s

260 °C (500 °F)

0.307 in (7.8 mm)

AD7356BRUZ-500RL7

Analog Devices

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

16

TSSOP

Rectangular

Plastic/Epoxy

2

Yes

5 MHz

1

CMOS

12

0.0244 %

2.5 V

Binary

2.5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP16,.25

Analog to Digital Converters

0.026 in (0.65 mm)

85 °C (185 °F)

Serial

-40 °C (-40 °F)

Matte Tin

Track

Dual

R-PDSO-G16

1

0.047 in (1.2 mm)

0.173 in (4.4 mm)

No

e3

30 s

260 °C (500 °F)

0.197 in (5 mm)

AD7417ARUZ

Analog Devices

Analog To Digital Converter, Successive Approximation

Automotive

Gull Wing

16

TSSOP

Rectangular

Plastic/Epoxy

4

Yes

2.625 V

1

10

0.0977 %

3 V

2's Complement Binary

Small Outline, Thin Profile, Shrink Pitch

0.026 in (0.65 mm)

125 °C (257 °F)

0 mV

Serial

-40 °C (-40 °F)

Matte Tin

Track

Dual

15 µs

R-PDSO-G16

1

0.047 in (1.2 mm)

0.173 in (4.4 mm)

No

e3

30 s

260 °C (500 °F)

0.197 in (5 mm)

AD9238BSTZ-40

Analog Devices

Analog To Digital Converter, Flash Method

Industrial

Gull Wing

64

LFQFP

Square

Plastic/Epoxy

2

Yes

2 V

40 MHz

1

CMOS

12

0.0342 %

3 V

Offset Binary, 2's Complement Binary

2.5,3 V

Flatpack, Low Profile, Fine Pitch

QFP64,.35SQ,16

Analog to Digital Converters

0.016 in (0.4 mm)

85 °C (185 °F)

1 V

Parallel, Word

-40 °C (-40 °F)

Matte Tin

Sample

Quad

S-PQFP-G64

3

0.063 in (1.6 mm)

0.276 in (7 mm)

No

e3

30 s

260 °C (500 °F)

0.276 in (7 mm)

AD9265BCPZ-125

Analog Devices

Analog To Digital Converter, Flash Method

Industrial

No Lead

48

HVQCCN

Square

1

Yes

2 V

125 MHz

1

16

202 mA

0.006866 %

1.8 V

Offset Binary, 2's Complement Binary, Gray Code

1.8 V

Chip Carrier, Heat Sink/Slug, Very Thin Profile

LCC48,.27SQ,20

Analog to Digital Converters

0.02 in (0.5 mm)

85 °C (185 °F)

-2 V

Parallel, Word

-40 °C (-40 °F)

Matte Tin

Sample

Quad

100 ns

S-XQCC-N48

0.031 in (0.8 mm)

0.276 in (7 mm)

No

e3

0.276 in (7 mm)

ADC101C021CIMKX/NOPB

Texas Instruments

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

6

TSSOP

Rectangular

Plastic/Epoxy

1

Yes

5.5 V

189 kHz

1

10

990 μA

0.0488 %

3 V

Binary

3/5 V

Small Outline, Thin Profile, Shrink Pitch

TSOP6,.11,37

Analog to Digital Converters

2.7 V

0.037 in (0.95 mm)

105 °C (221 °F)

0 mV

Serial

-40 °C (-40 °F)

Matte Tin

Track

Dual

179 µs

R-PDSO-G6

1

0.043 in (1.1 mm)

0.063 in (1.6 mm)

No

e3

30 s

260 °C (500 °F)

0.114 in (2.9 mm)

ADS131M03IRUKT

Texas Instruments

Analog To Digital Converter, Delta-Sigma

Automotive

No Lead

20

HVQCCN

Square

Plastic/Epoxy

3

Yes

3.6 V

64 kHz

1

24

3.2 mA

0.0006 %

3 V

Binary, 2's Complement Binary

Chip Carrier, Heat Sink/Slug, Very Thin Profile

LCC20,.12SQ,16

1.65 V

0.016 in (0.4 mm)

125 °C (257 °F)

-1.3 V

Serial

-40 °C (-40 °F)

Nickel Palladium Gold

Quad

S-PQCC-N20

1

0.031 in (0.8 mm)

0.118 in (3 mm)

e4

30 s

260 °C (500 °F)

0.118 in (3 mm)

ADS54RF63IPFP

Texas Instruments

Analog To Digital Converter, Proprietary Method

Industrial

Gull Wing

80

HTFQFP

Square

Plastic/Epoxy

1

Yes

2.2 V

550 MHz

1

Bipolar

12

330 mA

0.1099 %

3.3 V

Offset Binary

3.3,5 V

Flatpack, Heat Sink/Slug, Thin Profile, Fine Pitch

TQFP80,.55SQ

Analog to Digital Converters

0.02 in (0.5 mm)

85 °C (185 °F)

-2.2 V

Parallel, Word

-40 °C (-40 °F)

Nickel Palladium Gold

Track

Quad

S-PQFP-G80

4

0.047 in (1.2 mm)

0.472 in (12 mm)

No

Peak-to-peak input voltage range: 2.2 V

e4

30 s

260 °C (500 °F)

0.472 in (12 mm)

ADS8350IRTER

Texas Instruments

Analog To Digital Converter, Successive Approximation

Automotive

No Lead

16

HVQCCN

Square

Plastic/Epoxy

2

Yes

5.5 V

750 kHz

1

16

9 mA

0.0038 %

5 V

Binary

Chip Carrier, Heat Sink/Slug, Very Thin Profile

1.65 V

0.02 in (0.5 mm)

125 °C (257 °F)

-2.25 V

Serial

-40 °C (-40 °F)

Nickel Palladium Gold

Sample

Quad

590 ns

S-PQCC-N16

2

0.031 in (0.8 mm)

0.118 in (3 mm)

e4

30 s

260 °C (500 °F)

0.118 in (3 mm)

CS53L21-CNZ

Cirrus Logic

Analog To Digital Converter, Delta-Sigma

Commercial

No Lead

32

VQCCN

Square

2

Yes

2.15 V

960 Hz

1

24

1.8 V

Binary, 2's Complement Binary

Chip Carrier, Very Thin Profile

0.02 in (0.5 mm)

70 °C (158 °F)

350 mV

Serial

-10 °C (14 °F)

Matte Tin

Quad

S-XQCC-N32

3

0.039 in (1 mm)

0.197 in (5 mm)

No

e3

260 °C (500 °F)

0.197 in (5 mm)

LTC1403ACMSE-1#PBF

Analog Devices

Analog To Digital Converter, Proprietary Method

Commercial

Gull Wing

10

TSSOP

Square

Plastic/Epoxy

1

Yes

1.25 V

2.8 MHz

1

CMOS

14

0.0244 %

3 V

Binary, 2's Complement Binary

Small Outline, Thin Profile, Shrink Pitch

0.02 in (0.5 mm)

70 °C (158 °F)

-1.25 V

Serial

0 °C (32 °F)

Matte Tin

Sample

Dual

357 µs

S-PDSO-G10

1

0.043 in (1.1 mm)

0.118 in (3 mm)

No

e3

30 s

260 °C (500 °F)

0.118 in (3 mm)

MAX11606EUA+

Analog Devices

Analog To Digital Converter, Proprietary Method

Industrial

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

4

Yes

4.256 V

94.4 kHz

1

BICMOS

10

0.0977 %

5 V

Binary, 2's Complement Binary

5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.19

Analog to Digital Converters

0.026 in (0.65 mm)

85 °C (185 °F)

0 mV

Serial

-40 °C (-40 °F)

Nickel Gold Palladium

Track

Dual

6.8 µs

S-PDSO-G8

1

0.043 in (1.1 mm)

0.118 in (3 mm)

No

30 s

260 °C (500 °F)

0.118 in (3 mm)

MCP37221-200I/TL

Microchip Technology

Analog To Digital Converter, Flash Method

Industrial

Butt

124

HVBCC

Square

8

Yes

200 MHz

1

TS 16949

14

1.2 V

Offset Binary, 2's Complement Binary

Chip Carrier, Heat Sink/Slug, Very Thin Profile

85 °C (185 °F)

Serial, Parallel, Word

-40 °C (-40 °F)

Nickel Palladium Gold

Sample

Bottom

5 ns

S-XBCC-B124

1

0.037 in (0.95 mm)

0.354 in (9 mm)

e4

0.354 in (9 mm)

MCP3903-I/SS

Microchip Technology

Analog To Digital Converter, Delta-Sigma

Industrial

Gull Wing

28

SSOP

Rectangular

Plastic/Epoxy

6

Yes

1 V

64 kHz

TS 16949

24

Binary

3/3.3,5 V

Small Outline, Shrink Pitch

SSOP28,.3

Other Converters

0.026 in (0.65 mm)

85 °C (185 °F)

-1 V

-40 °C (-40 °F)

Matte Tin

Dual

R-PDSO-G28

1

0.079 in (2 mm)

0.209 in (5.3 mm)

No

e3

260 °C (500 °F)

0.402 in (10.2 mm)

TLV2544IPW

Texas Instruments

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

16

TSSOP

Rectangular

Plastic/Epoxy

4

Yes

5.5 V

200 kHz

1

CMOS

12

2.1 mA

0.0244 %

3.3 V

Binary

3/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP16,.25

Analog to Digital Converters

2.7 V

0.026 in (0.65 mm)

85 °C (185 °F)

0 mV

Serial

-40 °C (-40 °F)

Nickel Palladium Gold

Sample

Dual

3.86 µs

R-PDSO-G16

1

0.047 in (1.2 mm)

0.173 in (4.4 mm)

No

e4

30 s

260 °C (500 °F)

0.197 in (5 mm)

TLV2548IPWRG4

Texas Instruments

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

20

TSSOP

Rectangular

Plastic/Epoxy

8

Yes

5.5 V

200 kHz

1

CMOS

12

2.1 mA

0.0244 %

3.3 V

Binary

3/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP20,.25

Analog to Digital Converters

0.026 in (0.65 mm)

85 °C (185 °F)

0 mV

Serial

-40 °C (-40 °F)

Nickel Palladium Gold

Sample

Dual

3.86 µs

R-PDSO-G20

1

0.047 in (1.2 mm)

0.173 in (4.4 mm)

No

e4

30 s

260 °C (500 °F)

0.256 in (6.5 mm)

AD7091RBRMZ

Analog Devices

Analog To Digital Converter, Successive Approximation

Automotive

Gull Wing

10

TSSOP

Square

Plastic/Epoxy

1

Yes

2.525 V

1 MHz

1

CMOS

12

0.0244 %

3 V

Binary

3/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP10,.19,20

Analog to Digital Converters

0.02 in (0.5 mm)

125 °C (257 °F)

0 mV

Serial

-40 °C (-40 °F)

Matte Tin

Track

Dual

650 ns

S-PDSO-G10

1

0.043 in (1.1 mm)

0.118 in (3 mm)

No

e3

30 s

260 °C (500 °F)

0.118 in (3 mm)

AD7321BRUZ-REEL7

Analog Devices

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

14

TSSOP

Rectangular

Plastic/Epoxy

2

Yes

10 V

500 kHz

1

CMOS

12

0.0269 %

3 V

Binary, 2's Complement Binary

3/5,±12/±16.5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP14,.25

Analog to Digital Converters

0.026 in (0.65 mm)

85 °C (185 °F)

-10 V

Serial

-40 °C (-40 °F)

Matte Tin

Track

Dual

1.6 µs

R-PDSO-G14

1

0.047 in (1.2 mm)

0.173 in (4.4 mm)

No

e3

30 s

260 °C (500 °F)

0.197 in (5 mm)

Analog-to-Digital Converters

Analog-to-digital converters (ADCs) are electronic devices that convert continuous analog signals into digital signals, which can be processed by digital circuits, microcontrollers, or computers. ADCs are essential components in many electronic systems, as they allow the measurement and processing of physical signals, such as temperature, pressure, light, and sound.

ADCs work by sampling the analog signal at regular intervals and quantizing the sampled signal into a series of digital values. The sampling rate and the resolution of the ADC determine the accuracy and the bandwidth of the digital signal. ADCs may also include features such as amplification, filtering, or signal conditioning, to improve the accuracy and stability of the digital signal.

ADCs can be classified based on their architecture and their application. The most common types of ADCs are successive approximation ADCs, delta-sigma ADCs, and pipeline ADCs. Each type has its advantages and limitations, depending on the application and the required performance.

ADCs are used in a wide range of applications, from consumer electronics, such as smartphones and digital cameras, to industrial automation, medical devices, and scientific instruments. They play a crucial role in the conversion of physical signals into digital signals, allowing the processing, storage, and transmission of data in electronic systems.

Overall, ADCs are essential components in many electronic systems, providing the necessary signal conversion for a wide range of applications. Their accuracy, speed, and resolution determine the performance and the functionality of many electronic devices and systems.