Part | RoHS | Manufacturer | Converter Type | Temperature Grade | Terminal Form | No. of Terminals | Package Code | Package Shape | Package Body Material | Surface Mount | Nominal Temperature Coefficient | No. of Functions | Technology | Screening Level | Nominal Bandwidth | Control Interface | Resistance Law | Nominal Total Resistance | Maximum Supply Current | Maximum Resistor Terminal Voltage | Maximum Linearity Error (EL) | Nominal Supply Voltage | Power Supplies (V) | Nominal Negative Supply Voltage | Package Style (Meter) | Package Equivalence Code | Sub-Category | Terminal Pitch | Maximum Operating Temperature | Minimum Operating Temperature | Terminal Finish | Terminal Position | Minimum Resistor Terminal Voltage | JESD-30 Code | Moisture Sensitivity Level (MSL) | Maximum Seated Height | Maximum Resistance Tolerance | Width | Qualification | No. of Positions | Additional Features | JESD-609 Code | Maximum Time At Peak Reflow Temperature (s) | Peak Reflow Temperature (C) | Length | Input Bit Code |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Maxim Integrated |
Digital Potentiometer |
Industrial |
Gull Wing |
6 |
LSSOP |
Rectangular |
Plastic/Epoxy |
Yes |
1 |
CMOS |
3-Wire Serial |
Linear |
200 KΩ |
5 V |
3/5 V |
Small Outline, Low Profile, Shrink Pitch |
TSOP6,.11,37 |
Digital Potentiometers |
0.037 in (0.95 mm) |
85 °C (185 °F) |
-40 °C (-40 °F) |
Tin Lead |
Dual |
R-PDSO-G6 |
1 |
0.057 in (1.45 mm) |
0.064 in (1.625 mm) |
No |
32 |
Rest 3 resistor array values are: 50000, 100000 Ω |
e0 |
0.114 in (2.9 mm) |
||||||||||||||
Maxim Integrated |
Digital Potentiometer |
Industrial |
Gull Wing |
8 |
SOP |
Rectangular |
Plastic/Epoxy |
Yes |
750 ppm/°C |
1 |
100 Hz |
Push-Button |
Linear |
100 KΩ |
4.5/8.0 V |
Small Outline |
SOP8,.25 |
Digital Potentiometers |
0.05 in (1.27 mm) |
85 °C (185 °F) |
-40 °C (-40 °F) |
Tin Lead |
Dual |
R-PDSO-G8 |
1 |
0.084 in (2.13 mm) |
20 % |
0.208 in (5.285 mm) |
No |
64 |
The voltage applied to any terminal must not exceed the -v or by 0.5 V |
e0 |
0.209 in (5.31 mm) |
|||||||||||||
|
Maxim Integrated |
Digital Potentiometer |
Industrial |
Gull Wing |
8 |
SOP |
Rectangular |
Plastic/Epoxy |
Yes |
750 ppm/°C |
1 |
Increment/Decrement |
Linear |
50 KΩ |
1.5 V |
±2.2/±8 V |
-1.5 V |
Small Outline |
SOP8,.25 |
Digital Potentiometers |
0.05 in (1.27 mm) |
85 °C (185 °F) |
-40 °C (-40 °F) |
Matte Tin |
Dual |
R-PDSO-G8 |
1 |
0.084 in (2.13 mm) |
20 % |
0.208 in (5.29 mm) |
No |
64 |
Also operate with single 5 V supply |
e3 |
30 s |
260 °C (500 °F) |
0.209 in (5.31 mm) |
|||||||||
Maxim Integrated |
Digital Potentiometer |
Industrial |
Gull Wing |
8 |
SOP |
Rectangular |
Plastic/Epoxy |
Yes |
750 ppm/°C |
1 |
1 kHz |
Push-Button |
Linear |
10 KΩ |
4.5/8.0 V |
Small Outline |
SOP8,.25 |
Digital Potentiometers |
0.05 in (1.27 mm) |
85 °C (185 °F) |
-40 °C (-40 °F) |
Tin/Lead |
Dual |
R-PDSO-G8 |
1 |
0.084 in (2.13 mm) |
20 % |
0.208 in (5.285 mm) |
No |
64 |
The voltage applied to any terminal must not exceed the -v or by 0.5 V |
e0 |
20 s |
240 °C (464 °F) |
0.209 in (5.31 mm) |
|||||||||||
Maxim Integrated |
Digital Potentiometer |
Industrial |
Gull Wing |
16 |
SOP |
Rectangular |
Plastic/Epoxy |
Yes |
3-Wire Serial |
Linear |
10 KΩ |
5 V |
-5 V |
Small Outline |
0.1 in (2.54 mm) |
85 °C (185 °F) |
-40 °C (-40 °F) |
Tin Lead |
Dual |
R-PDSO-G16 |
1 |
0.18 in (4.57 mm) |
0.25 in (6.35 mm) |
No |
256 |
e0 |
0.76 in (19.304 mm) |
|||||||||||||||||||
Maxim Integrated |
Digital Potentiometer |
Industrial |
Gull Wing |
20 |
TSSOP |
Rectangular |
Plastic/Epoxy |
Yes |
1 |
CMOS |
3-Wire Serial |
Linear |
50 KΩ |
3 V |
5 V |
Small Outline, Thin Profile, Shrink Pitch |
TSSOP20,.25 |
Digital Potentiometers |
0.026 in (0.65 mm) |
85 °C (185 °F) |
-40 °C (-40 °F) |
Tin Lead |
Dual |
R-PDSO-G20 |
1 |
0.043 in (1.1 mm) |
0.173 in (4.4 mm) |
No |
256 |
User selectable 5 V supply |
e0 |
0.256 in (6.5 mm) |
||||||||||||||
Maxim Integrated |
Digital Potentiometer |
Industrial |
Gull Wing |
16 |
SOP |
Rectangular |
Plastic/Epoxy |
Yes |
CMOS |
Linear |
5 V |
5 V |
Small Outline |
SOP16,.4 |
Digital Potentiometers |
0.05 in (1.27 mm) |
85 °C (185 °F) |
-40 °C (-40 °F) |
Tin/Lead |
Dual |
R-PDSO-G16 |
No |
e0 |
|||||||||||||||||||||||
Maxim Integrated |
Digital Potentiometer |
Industrial |
Ball |
14 |
VFBGA |
Rectangular |
Yes |
30 ppm/°C |
2 |
2-Wire Serial |
Linear |
100 KΩ |
3.5 V |
3 V |
3/5 V |
Grid Array, Very Thin Profile, Fine Pitch |
BGA16,4X4,40 |
Digital Potentiometers |
0.02 in (0.5 mm) |
85 °C (185 °F) |
-40 °C (-40 °F) |
Tin Lead |
Bottom |
-500 mV |
R-XBGA-B14 |
1 |
0.033 in (0.841 mm) |
20 % |
0.079 in (2 mm) |
No |
256 |
Nonvolatile memory; other resistor value is 10000 Ω; it can also operate from a 5 V supply |
e0 |
0.092 in (2.338 mm) |
||||||||||||
Maxim Integrated |
Digital Potentiometer |
|||||||||||||||||||||||||||||||||||||||||||||
Maxim Integrated |
Digital Potentiometer |
Industrial |
Gull Wing |
14 |
TSSOP |
Rectangular |
Plastic/Epoxy |
Yes |
35 ppm/°C |
2 |
BICMOS |
2-Wire Serial |
Linear |
10 KΩ |
5 V |
5 V |
3/5 V |
Small Outline, Thin Profile, Shrink Pitch |
TSSOP14,.25 |
Digital Potentiometers |
0.026 in (0.65 mm) |
85 °C (185 °F) |
-40 °C (-40 °F) |
Tin Lead |
Dual |
0 V |
R-PDSO-G14 |
1 |
0.043 in (1.1 mm) |
0.173 in (4.4 mm) |
No |
256 |
e0 |
245 °C (473 °F) |
0.197 in (5 mm) |
|||||||||||
Maxim Integrated |
Digital Potentiometer |
Industrial |
Through-Hole |
20 |
DIP |
Rectangular |
Plastic/Epoxy |
No |
750 ppm/°C |
4 |
CMOS |
200 Hz |
2-Wire Serial |
Linear |
50 KΩ |
3.5 V |
3 V |
3/5 V |
In-Line |
DIP20,.3 |
Digital Potentiometers |
0.1 in (2.54 mm) |
85 °C (185 °F) |
-40 °C (-40 °F) |
Tin Lead |
Dual |
-500 mV |
R-PDIP-T20 |
1 |
0.18 in (4.572 mm) |
20 % |
0.3 in (7.62 mm) |
No |
64 |
Rest 3 resistor array values are 50000 Ω each with 64 tap position |
e0 |
1.03 in (26.16 mm) |
|||||||||
Maxim Integrated |
Digital Potentiometer |
Industrial |
Gull Wing |
16 |
SOP |
Rectangular |
Plastic/Epoxy |
Yes |
CMOS |
Linear |
3/5 V |
Small Outline |
SOP16,.4 |
Digital Potentiometers |
0.05 in (1.27 mm) |
85 °C (185 °F) |
-40 °C (-40 °F) |
Tin/Lead |
Dual |
R-PDSO-G16 |
No |
e0 |
||||||||||||||||||||||||
Maxim Integrated |
Digital Potentiometer |
Industrial |
Gull Wing |
16 |
SOP |
Rectangular |
Plastic/Epoxy |
Yes |
750 ppm/°C |
2 |
700 Hz |
3-Wire Serial |
Logarithmic |
45 KΩ |
3.5 V |
3 V |
3/5 V |
Small Outline |
SOP16,.4 |
Digital Potentiometers |
0.05 in (1.27 mm) |
85 °C (185 °F) |
-40 °C (-40 °F) |
Tin Lead |
Dual |
-500 mV |
R-PDSO-G16 |
0.104 in (2.65 mm) |
20 % |
0.295 in (7.5 mm) |
No |
65 |
Other resistor value is 45000 Ω with 65 tap positions |
e0 |
0.406 in (10.3 mm) |
|||||||||||
Maxim Integrated |
Digital Potentiometer |
Industrial |
Gull Wing |
8 |
SOP |
Rectangular |
Plastic/Epoxy |
Yes |
50 ppm/°C |
1 |
BICMOS |
2-Wire Serial |
Linear |
50 KΩ |
1.65 V |
5 V |
Small Outline |
85 °C (185 °F) |
-40 °C (-40 °F) |
Tin Lead |
Dual |
1.89 V |
R-PDSO-G8 |
1 |
256 |
e0 |
||||||||||||||||||||
Maxim Integrated |
Digital Potentiometer |
Industrial |
Gull Wing |
14 |
TSSOP |
Rectangular |
Plastic/Epoxy |
Yes |
750 ppm/°C |
2 |
1 kHz |
2-Wire Serial |
Linear |
10 KΩ |
3.5 V |
3 V |
Small Outline, Thin Profile, Shrink Pitch |
0.026 in (0.65 mm) |
85 °C (185 °F) |
-40 °C (-40 °F) |
Tin Lead |
Dual |
-500 mV |
R-PDSO-G14 |
1 |
0.043 in (1.1 mm) |
20 % |
0.173 in (4.4 mm) |
No |
256 |
ALSO OPERATES FROM 5 V NOMINAL SUPPLY |
e0 |
0.197 in (5 mm) |
|||||||||||||
Maxim Integrated |
Digital Potentiometer |
Industrial |
Gull Wing |
8 |
SOP |
Rectangular |
Plastic/Epoxy |
Yes |
1 |
Linear |
50 KΩ |
0 V |
Small Outline |
0.05 in (1.27 mm) |
85 °C (185 °F) |
-40 °C (-40 °F) |
Tin Lead |
Dual |
R-PDSO-G8 |
1 |
0.084 in (2.13 mm) |
0.209 in (5.31 mm) |
No |
The voltage applied to any terminal must not exceed ±0.5 V |
e0 |
0.209 in (5.31 mm) |
||||||||||||||||||||
|
Maxim Integrated |
Digital Potentiometer |
Industrial |
Through-Hole |
3 |
TO-92 |
Round |
Plastic/Epoxy |
No |
800 ppm/°C |
1 |
100 Hz |
1-Wire Serial |
Linear |
100 KΩ |
11 V |
3 V |
3/5 V |
Cylindrical |
SIP3,.1,50 |
Digital Potentiometers |
0.05 in (1.27 mm) |
85 °C (185 °F) |
-40 °C (-40 °F) |
Matte Tin |
Bottom |
-300 mV |
O-PBCY-T3 |
25 % |
No |
256 |
Operates at 2.8 V to 6 V supply |
e3 |
|||||||||||||
|
Maxim Integrated |
Digital Potentiometer |
Commercial |
Ball |
16 |
LBGA |
Square |
Plastic/Epoxy |
Yes |
50 ppm/°C |
2 |
2-Wire Serial |
Linear |
20 KΩ |
3.6 V |
3.3 V |
GRID ARRAY, LOW PROFILE |
0.039 in (1 mm) |
70 °C (158 °F) |
0 °C (32 °F) |
Bottom |
-300 mV |
S-PBGA-B16 |
0.059 in (1.5 mm) |
0.157 in (4 mm) |
No |
256 |
Nonvolatile memory; other resistor value is 20000 Ω; it can also operate from a 5 V supply |
0.157 in (4 mm) |
|||||||||||||||||
Maxim Integrated |
Digital Potentiometer |
Industrial |
Gull Wing |
8 |
TSSOP |
Square |
Plastic/Epoxy |
Yes |
35 ppm/°C |
1 |
BICMOS |
200 Hz |
Increment/Decrement |
Linear |
50 KΩ |
5 V |
3/5 V |
Small Outline, Thin Profile, Shrink Pitch |
TSSOP8,.19 |
Digital Potentiometers |
0.026 in (0.65 mm) |
105 °C (221 °F) |
-40 °C (-40 °F) |
Tin Lead |
Dual |
S-PDSO-G8 |
1 |
0.043 in (1.1 mm) |
0.118 in (3 mm) |
No |
64 |
e0 |
245 °C (473 °F) |
0.118 in (3 mm) |
||||||||||||
Maxim Integrated |
Digital Potentiometer |
Industrial |
Gull Wing |
16 |
SOP |
Rectangular |
Plastic/Epoxy |
Yes |
CMOS |
Linear |
3/5 V |
Small Outline |
SOP16,.25 |
Digital Potentiometers |
0.05 in (1.27 mm) |
85 °C (185 °F) |
-40 °C (-40 °F) |
Tin/Lead |
Dual |
R-PDSO-G16 |
No |
e0 |
||||||||||||||||||||||||
Maxim Integrated |
Digital Potentiometer |
Industrial |
Gull Wing |
6 |
TSSOP |
Rectangular |
Plastic/Epoxy |
Yes |
50 ppm/°C |
1 |
Increment/Decrement |
Linear |
200 KΩ |
5 V |
5 V |
3/5 V |
Small Outline, Thin Profile, Shrink Pitch |
TSOP6,.11,37 |
Digital Potentiometers |
0.037 in (0.95 mm) |
85 °C (185 °F) |
-40 °C (-40 °F) |
Tin Lead |
Dual |
0 V |
R-PDSO-G6 |
1 |
0.043 in (1.1 mm) |
25 % |
0.063 in (1.6 mm) |
No |
32 |
e0 |
245 °C (473 °F) |
0.114 in (2.9 mm) |
|||||||||||
Maxim Integrated |
Digital Potentiometer |
Industrial |
Ball |
16 |
LBGA |
Square |
Plastic/Epoxy |
Yes |
2 |
2-Wire Serial |
Linear |
50 KΩ |
3.3 V |
3 V |
GRID ARRAY, LOW PROFILE |
0.039 in (1 mm) |
95 °C (203 °F) |
-40 °C (-40 °F) |
Bottom |
-300 mV |
S-PBGA-B16 |
0.059 in (1.5 mm) |
0.157 in (4 mm) |
No |
256 |
Nonvolatile memory; other resistor value is 10000 Ω; it can also operate from a 5 V supply |
0.157 in (4 mm) |
|||||||||||||||||||
Maxim Integrated |
Digital Potentiometer |
Industrial |
Gull Wing |
16 |
SOP |
Rectangular |
Plastic/Epoxy |
Yes |
750 ppm/°C |
2 |
100 Hz |
3-Wire Serial |
Linear |
100 KΩ |
5.5 V |
5 V |
5 V |
Small Outline |
SOP16,.4 |
Digital Potentiometers |
0.05 in (1.27 mm) |
85 °C (185 °F) |
-40 °C (-40 °F) |
Tin Lead |
Dual |
R-PDSO-G16 |
1 |
0.104 in (2.65 mm) |
20 % |
0.295 in (7.5 mm) |
No |
256 |
e0 |
0.406 in (10.3 mm) |
||||||||||||
Maxim Integrated |
Digital Potentiometer |
Industrial |
Gull Wing |
8 |
SOP |
Rectangular |
Plastic/Epoxy |
Yes |
1 |
Linear |
10 KΩ |
0 V |
Small Outline |
85 °C (185 °F) |
-40 °C (-40 °F) |
Dual |
R-PDSO-G8 |
No |
The voltage applied to any terminal must not exceed ±0.5 V |
|||||||||||||||||||||||||||
Maxim Integrated |
Digital Potentiometer |
Industrial |
Through-Hole |
14 |
DIP |
Rectangular |
Plastic/Epoxy |
No |
750 ppm/°C |
2 |
700 Hz |
3-Wire Serial |
Logarithmic |
45 KΩ |
3.5 V |
3 V |
3/5 V |
In-Line |
DIP14,.3 |
Digital Potentiometers |
0.1 in (2.54 mm) |
85 °C (185 °F) |
-40 °C (-40 °F) |
Tin Lead |
Dual |
-500 mV |
R-PDIP-T14 |
1 |
0.18 in (4.572 mm) |
20 % |
0.3 in (7.62 mm) |
No |
65 |
Other resistor value is 45000 Ω with 65 tap positions |
e0 |
245 °C (473 °F) |
0.75 in (19.05 mm) |
|||||||||
Maxim Integrated |
Digital Potentiometer |
Industrial |
Gull Wing |
20 |
SOP |
Rectangular |
Plastic/Epoxy |
Yes |
3-Wire Serial |
Linear |
50 KΩ |
3/5 V |
Small Outline |
SOP20,.4 |
Digital Potentiometers |
0.05 in (1.27 mm) |
85 °C (185 °F) |
-40 °C (-40 °F) |
Tin Lead |
Dual |
R-PDSO-G20 |
1 |
0.104 in (2.65 mm) |
0.295 in (7.5 mm) |
No |
64 |
e0 |
245 °C (473 °F) |
0.504 in (12.8 mm) |
|||||||||||||||||
Maxim Integrated |
Digital Potentiometer |
Industrial |
Gull Wing |
16 |
SSOP |
Rectangular |
Plastic/Epoxy |
Yes |
1 |
CMOS |
Increment/Decrement |
Linear |
10 KΩ |
3/5 V |
Small Outline, Shrink Pitch |
SSOP16,.25 |
Digital Potentiometers |
0.025 in (0.635 mm) |
85 °C (185 °F) |
-40 °C (-40 °F) |
Tin Lead |
Dual |
R-PDSO-G16 |
1 |
0.069 in (1.75 mm) |
0.154 in (3.9 mm) |
No |
e0 |
0.193 in (4.9 mm) |
|||||||||||||||||
Maxim Integrated |
Digital Potentiometer |
Industrial |
Ball |
16 |
LBGA |
Square |
Plastic/Epoxy |
Yes |
850 ppm/°C |
2 |
2-Wire Serial |
Linear |
10 KΩ |
3.3 V |
3 V |
3.3/5 V |
GRID ARRAY, LOW PROFILE |
BGA16,4X4,40 |
Digital Potentiometers |
0.039 in (1 mm) |
95 °C (203 °F) |
-40 °C (-40 °F) |
Tin Lead |
Bottom |
-300 mV |
S-PBGA-B16 |
3 |
0.059 in (1.5 mm) |
0.157 in (4 mm) |
No |
256 |
Nonvolatile memory; other resistor value is 10000 Ω; it can also operate from a 5 V supply |
e0 |
0.157 in (4 mm) |
||||||||||||
Maxim Integrated |
Digital Potentiometer |
Industrial |
No Lead |
16 |
HVQCCN |
Square |
Yes |
35 ppm/°C |
2 |
BICMOS |
250 Hz |
3-Wire Serial |
Linear |
10 KΩ |
5 V |
3/5 V |
0 V |
Chip Carrier, Heat Sink/Slug, Very Thin Profile |
LCC16,.2SQ,32 |
Digital Potentiometers |
0.031 in (0.8 mm) |
85 °C (185 °F) |
-40 °C (-40 °F) |
Tin Lead |
Quad |
S-XQCC-N16 |
1 |
0.031 in (0.8 mm) |
0.197 in (5 mm) |
No |
1024 |
Nonvolatile; other resistor value is 10000 Ω w/1024 tap postions; also operate w/2.5 V dual supply |
e0 |
0.197 in (5 mm) |
||||||||||||
Maxim Integrated |
Digital Potentiometer |
Commercial |
Gull Wing |
16 |
SOP |
Rectangular |
Plastic/Epoxy |
Yes |
1 |
CMOS |
3-Wire Serial |
Linear |
10 KΩ |
5 V |
5 V |
Small Outline |
SOP16,.4 |
Digital Potentiometers |
0.1 in (2.54 mm) |
70 °C (158 °F) |
0 °C (32 °F) |
Tin Lead |
Dual |
R-PDSO-G16 |
0.18 in (4.57 mm) |
0.25 in (6.35 mm) |
No |
256 |
e0 |
0.76 in (19.304 mm) |
||||||||||||||||
Maxim Integrated |
Digital Potentiometer |
Industrial |
Gull Wing |
8 |
TSSOP |
Square |
Plastic/Epoxy |
Yes |
2 |
2-Wire Serial |
Linear |
50 KΩ |
5.5 V |
3.3 V |
2.5/5 V |
Small Outline, Thin Profile, Shrink Pitch |
TSSOP8,.19 |
Digital Potentiometers |
0.026 in (0.65 mm) |
95 °C (203 °F) |
-40 °C (-40 °F) |
Tin Lead |
Dual |
-300 mV |
S-PDSO-G8 |
0.043 in (1.1 mm) |
20 % |
0.118 in (3 mm) |
No |
256 |
Nonvolatile memory; rest 2 resistor array value is 30000 Ω |
e0 |
245 °C (473 °F) |
0.118 in (3 mm) |
||||||||||||
Maxim Integrated |
Digital Potentiometer |
Industrial |
Gull Wing |
20 |
TSSOP |
Rectangular |
Plastic/Epoxy |
Yes |
2-Wire Serial |
Linear |
10 KΩ |
5 V |
Small Outline, Thin Profile, Shrink Pitch |
0.026 in (0.65 mm) |
85 °C (185 °F) |
-40 °C (-40 °F) |
Tin Lead |
Dual |
R-PDSO-G20 |
1 |
0.043 in (1.1 mm) |
0.173 in (4.4 mm) |
No |
256 |
e0 |
0.256 in (6.5 mm) |
||||||||||||||||||||
Maxim Integrated |
Digital Potentiometer |
Industrial |
No Lead |
16 |
HVQCCN |
Square |
Yes |
35 ppm/°C |
2 |
BICMOS |
250 Hz |
3-Wire Serial |
Linear |
10 KΩ |
5 V |
3/5 V |
0 V |
Chip Carrier, Heat Sink/Slug, Very Thin Profile |
LCC16,.2SQ,32 |
Digital Potentiometers |
0.031 in (0.8 mm) |
85 °C (185 °F) |
-40 °C (-40 °F) |
Tin Lead |
Quad |
S-XQCC-N16 |
1 |
0.031 in (0.8 mm) |
0.197 in (5 mm) |
No |
1024 |
Nonvolatile; other resistor value is 10000 Ω w/1024 tap postions; also operate w/2.5 V dual supply |
e0 |
245 °C (473 °F) |
0.197 in (5 mm) |
|||||||||||
|
Maxim Integrated |
Digital Potentiometer |
Automotive |
Gull Wing |
14 |
TSSOP |
Rectangular |
Plastic/Epoxy |
Yes |
35 ppm/°C |
2 |
BICMOS |
50 Hz |
3-Wire Serial |
Linear |
100 KΩ |
1.8 V |
1.8 V |
Small Outline, Thin Profile, Shrink Pitch |
0.026 in (0.65 mm) |
125 °C (257 °F) |
-40 °C (-40 °F) |
Matte Tin |
Dual |
0 V |
R-PDSO-G14 |
1 |
0.043 in (1.1 mm) |
25 % |
0.173 in (4.4 mm) |
No |
256 |
e3 |
30 s |
260 °C (500 °F) |
0.197 in (5 mm) |
||||||||||
|
Maxim Integrated |
Digital Potentiometer |
Commercial |
Ball |
16 |
LBGA |
Square |
Plastic/Epoxy |
Yes |
50 ppm/°C |
2 |
2-Wire Serial |
Linear |
20 KΩ |
3.6 V |
3.3 V |
GRID ARRAY, LOW PROFILE |
0.039 in (1 mm) |
70 °C (158 °F) |
0 °C (32 °F) |
Tin Silver Copper |
Bottom |
-300 mV |
S-PBGA-B16 |
3 |
0.059 in (1.5 mm) |
0.157 in (4 mm) |
No |
256 |
Nonvolatile memory; other resistor value is 20000 Ω; it can also operate from a 5 V supply |
e1 |
30 s |
260 °C (500 °F) |
0.157 in (4 mm) |
||||||||||||
Maxim Integrated |
Digital Potentiometer |
Commercial |
Gull Wing |
20 |
TSSOP |
Rectangular |
Plastic/Epoxy |
Yes |
CMOS |
3-Wire Serial |
Linear |
100 KΩ |
5 V |
5 V |
Small Outline, Thin Profile, Shrink Pitch |
TSSOP20,.25 |
Digital Potentiometers |
0.026 in (0.65 mm) |
70 °C (158 °F) |
0 °C (32 °F) |
Tin Lead |
Dual |
R-PDSO-G20 |
1 |
0.043 in (1.1 mm) |
0.173 in (4.4 mm) |
No |
256 |
e0 |
0.256 in (6.5 mm) |
||||||||||||||||
Maxim Integrated |
Digital Potentiometer |
Industrial |
Gull Wing |
8 |
TSSOP |
Rectangular |
Plastic/Epoxy |
Yes |
750 ppm/°C |
1 |
200 Hz |
Increment/Decrement |
Linear |
50 KΩ |
5.5 V |
5 V |
3/5 V |
Small Outline, Thin Profile, Shrink Pitch |
TSSOP8,.19 |
Digital Potentiometers |
0.026 in (0.65 mm) |
85 °C (185 °F) |
-40 °C (-40 °F) |
Tin Lead |
Dual |
-500 mV |
R-PDSO-G8 |
1 |
0.043 in (1.1 mm) |
20 % |
0.118 in (3 mm) |
No |
100 |
Nonvolatile memory |
e0 |
0.118 in (3 mm) |
||||||||||
Maxim Integrated |
Digital Potentiometer |
Industrial |
Ball |
16 |
BGA |
Square |
Plastic/Epoxy |
Yes |
30 ppm/°C |
2 |
2-Wire Serial |
Linear |
20 KΩ |
3.5 V |
3 V |
3/5 V |
Grid Array |
FLIP CHIP |
Digital Potentiometers |
0.039 in (1 mm) |
85 °C (185 °F) |
-40 °C (-40 °F) |
Tin Lead |
Bottom |
-500 mV |
S-PBGA-B16 |
3 |
0.059 in (1.5 mm) |
20 % |
0.157 in (4 mm) |
No |
256 |
Nonvolatile memory; other resistor value is 10000 Ω; it can also operate from a 5 V supply |
e0 |
245 °C (473 °F) |
0.157 in (4 mm) |
||||||||||
Maxim Integrated |
Digital Potentiometer |
Industrial |
Through-Hole |
14 |
DIP |
Rectangular |
Plastic/Epoxy |
No |
750 ppm/°C |
2 |
CMOS |
100 Hz |
3-Wire Serial |
Linear |
100 KΩ |
5.5 V |
5 V |
5 V |
In-Line |
DIP14,.3 |
Digital Potentiometers |
0.1 in (2.54 mm) |
85 °C (185 °F) |
-40 °C (-40 °F) |
Tin Lead |
Dual |
R-PDIP-T14 |
1 |
0.18 in (4.572 mm) |
20 % |
0.3 in (7.62 mm) |
No |
256 |
e0 |
0.75 in (19.05 mm) |
|||||||||||
Maxim Integrated |
Digital Potentiometer |
Industrial |
Gull Wing |
20 |
TSSOP |
Rectangular |
Plastic/Epoxy |
Yes |
Linear |
5/±5 V |
Small Outline, Thin Profile, Shrink Pitch |
TSSOP20,.25 |
Digital Potentiometers |
0.025 in (0.635 mm) |
85 °C (185 °F) |
-40 °C (-40 °F) |
Tin/Lead |
Dual |
R-PDSO-G20 |
No |
e0 |
|||||||||||||||||||||||||
Maxim Integrated |
Digital Potentiometer |
Commercial |
Ball |
16 |
LBGA |
Square |
Plastic/Epoxy |
Yes |
50 ppm/°C |
2 |
2-Wire Serial |
Linear |
50 KΩ |
3.6 V |
3.3 V |
3/5 V |
GRID ARRAY, LOW PROFILE |
BGA16,4X4,40 |
Digital Potentiometers |
0.039 in (1 mm) |
70 °C (158 °F) |
0 °C (32 °F) |
Tin Lead |
Bottom |
-300 mV |
S-PBGA-B16 |
3 |
0.059 in (1.5 mm) |
0.157 in (4 mm) |
No |
256 |
Nonvolatile memory; other resistor value is 50000 Ω; it can also operate from a 5 V supply |
e0 |
0.157 in (4 mm) |
||||||||||||
|
Maxim Integrated |
Digital Potentiometer |
Industrial |
Gull Wing |
6 |
TSSOP |
Rectangular |
Plastic/Epoxy |
Yes |
35 ppm/°C |
1 |
BICMOS |
250 Hz |
2-Wire Serial |
Linear |
100 KΩ |
5 V |
5 V |
Small Outline, Thin Profile, Shrink Pitch |
0.037 in (0.95 mm) |
85 °C (185 °F) |
-40 °C (-40 °F) |
Matte Tin |
Dual |
0 V |
R-PDSO-G6 |
1 |
0.043 in (1.1 mm) |
0.063 in (1.6 mm) |
No |
32 |
e3 |
30 s |
260 °C (500 °F) |
0.114 in (2.9 mm) |
|||||||||||
Maxim Integrated |
Digital Potentiometer |
Industrial |
No Lead |
8 |
HVSON |
Square |
Yes |
35 ppm/°C |
1 |
BICMOS |
200 Hz |
Increment/Decrement |
Linear |
50 KΩ |
5 V |
3/5 V |
Small Outline, Heat Sink/Slug, Very Thin Profile |
SOLCC8,.12,25 |
Digital Potentiometers |
0.026 in (0.65 mm) |
105 °C (221 °F) |
-40 °C (-40 °F) |
Tin Lead |
Dual |
S-XDSO-N8 |
1 |
0.031 in (0.8 mm) |
0.118 in (3 mm) |
No |
64 |
e0 |
245 °C (473 °F) |
0.118 in (3 mm) |
|||||||||||||
|
Maxim Integrated |
Digital Potentiometer |
Industrial |
Ball |
16 |
LBGA |
Square |
Plastic/Epoxy |
Yes |
50 ppm/°C |
2 |
2-Wire Serial |
Linear |
20 KΩ |
3.6 V |
3.3 V |
3/5 V |
GRID ARRAY, LOW PROFILE |
BGA16,4X4,40 |
Digital Potentiometers |
0.039 in (1 mm) |
95 °C (203 °F) |
-40 °C (-40 °F) |
Tin Silver Copper |
Bottom |
-300 mV |
S-PBGA-B16 |
3 |
0.059 in (1.5 mm) |
0.157 in (4 mm) |
No |
256 |
Nonvolatile memory; other resistor value is 20000 Ω; it can also operate from a 5 V supply |
e1 |
30 s |
260 °C (500 °F) |
0.157 in (4 mm) |
|||||||||
Maxim Integrated |
Digital Potentiometer |
Industrial |
Gull Wing |
16 |
SOP |
Rectangular |
Plastic/Epoxy |
Yes |
750 ppm/°C |
2 |
CMOS |
2-Wire Serial |
Logarithmic |
45 KΩ |
6 V |
3 V |
3/5 V |
Small Outline |
SOP16,.4 |
Digital Potentiometers |
0.05 in (1.27 mm) |
85 °C (185 °F) |
-40 °C (-40 °F) |
Tin Lead |
Dual |
-500 mV |
R-PDSO-G16 |
1 |
0.104 in (2.65 mm) |
20 % |
0.295 in (7.5 mm) |
No |
65 |
e0 |
0.406 in (10.3 mm) |
|||||||||||
Maxim Integrated |
Digital Potentiometer |
Industrial |
Through-Hole |
14 |
DIP |
Rectangular |
Plastic/Epoxy |
No |
750 ppm/°C |
2 |
200 Hz |
3-Wire Serial |
Linear |
50 KΩ |
5.5 V |
5 V |
5 V |
-5 V |
In-Line |
DIP14,.3 |
Digital Potentiometers |
0.1 in (2.54 mm) |
85 °C (185 °F) |
-40 °C (-40 °F) |
Tin Lead |
Dual |
-5 V |
R-PDIP-T14 |
1 |
0.18 in (4.572 mm) |
20 % |
0.3 in (7.62 mm) |
No |
256 |
Operate with single 5 V supply |
e0 |
0.75 in (19.05 mm) |
|||||||||
Maxim Integrated |
Digital Potentiometer |
|||||||||||||||||||||||||||||||||||||||||||||
Maxim Integrated |
Digital Potentiometer |
Industrial |
Gull Wing |
6 |
TSSOP |
Rectangular |
Plastic/Epoxy |
Yes |
35 ppm/°C |
1 |
Increment/Decrement |
Linear |
50 KΩ |
2.7 V |
2.7 V |
3/5 V |
Small Outline, Thin Profile, Shrink Pitch |
TSSOP6,.08 |
Digital Potentiometers |
0.026 in (0.65 mm) |
85 °C (185 °F) |
-40 °C (-40 °F) |
Nickel Palladium Gold |
Dual |
0 V |
R-PDSO-G6 |
1 |
0.043 in (1.1 mm) |
0.049 in (1.25 mm) |
No |
32 |
e4 |
245 °C (473 °F) |
0.079 in (2 mm) |
Digital potentiometers, also known as DigiPOTs, are electronic devices that allow the user to adjust the resistance of a circuit digitally. They are designed to replace traditional mechanical potentiometers and offer several advantages, such as greater precision, faster response, and remote control.
DigiPOTs consist of a set of resistive elements, divided into several segments, and a wiper that can be moved to change the resistance between two terminals. The position of the wiper is controlled by digital signals, which are decoded to select the appropriate resistance segment. DigiPOTs can be programmed to provide a specific resistance value or to change the resistance in response to a specific input signal.
DigiPOTs are used in a wide range of applications, such as audio amplifiers, motor control circuits, and power management systems. They offer several advantages over traditional potentiometers, such as faster response time, more precise adjustment, and greater reliability. DigiPOTs also eliminate the need for mechanical parts, which can wear out over time and require replacement.
DigiPOTs come in different configurations, including single, dual, and quad-channel versions, each with different resistance ranges and step sizes. They can be controlled by a microcontroller or other digital circuit, and some models offer features such as non-volatile memory, temperature compensation, and programmable resolution.