Microchip Technology Digital Potentiometers (DigiPOT) 351
| Part | RoHS | Manufacturer | Converter Type | Temperature Grade | Terminal Form | No. of Terminals | Package Code | Package Shape | Package Body Material | Surface Mount | Nominal Temperature Coefficient | No. of Functions | Technology | Screening Level | Nominal Bandwidth | Control Interface | Resistance Law | Nominal Total Resistance | Maximum Supply Current | Maximum Resistor Terminal Voltage | Maximum Linearity Error (EL) | Nominal Supply Voltage | Power Supplies (V) | Nominal Negative Supply Voltage | Package Style (Meter) | Package Equivalence Code | Sub-Category | Terminal Pitch | Maximum Operating Temperature | Minimum Operating Temperature | Terminal Finish | Terminal Position | Minimum Resistor Terminal Voltage | JESD-30 Code | Moisture Sensitivity Level (MSL) | Maximum Seated Height | Maximum Resistance Tolerance | Width | Qualification | No. of Positions | Additional Features | JESD-609 Code | Maximum Time At Peak Reflow Temperature (s) | Peak Reflow Temperature (C) | Length | Input Bit Code |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
Microchip Technology |
Digital Potentiometer |
Automotive |
Gull Wing |
8 |
SOP |
Square |
Plastic/Epoxy |
Yes |
150 ppm/°C |
1 |
CMOS |
TS 16949 |
2 kHz |
2-Wire Serial |
Linear |
100 KΩ |
600 μA |
5.5 V |
3 V |
3/5 V |
Small Outline |
SOP8,.19 |
Digital Potentiometers |
0.026 in (0.65 mm) |
125 °C (257 °F) |
-40 °C (-40 °F) |
Matte Tin - annealed |
Dual |
0 V |
S-PDSO-G8 |
1 |
0.043 in (1.1 mm) |
20 % |
0.118 in (3 mm) |
No |
257 |
The resistor array values are 5000 Ω, 10000 Ω, 50000 Ω |
e3 |
40 s |
260 °C (500 °F) |
0.118 in (3 mm) |
||||
|
|
Microchip Technology |
Digital Potentiometer |
Automotive |
Gull Wing |
8 |
SOP |
Square |
Plastic/Epoxy |
Yes |
150 ppm/°C |
1 |
CMOS |
TS 16949 |
2 kHz |
Increment/Decrement |
Linear |
5 KΩ |
600 μA |
5.5 V |
2.7 V |
3/5 V |
Small Outline |
SOP8,.19 |
Digital Potentiometers |
0.026 in (0.65 mm) |
125 °C (257 °F) |
-40 °C (-40 °F) |
Matte Tin |
Dual |
0 V |
S-PDSO-G8 |
1 |
0.043 in (1.1 mm) |
20 % |
0.118 in (3 mm) |
No |
257 |
Non-volatile memory |
e3 |
40 s |
260 °C (500 °F) |
0.118 in (3 mm) |
||||
|
|
Microchip Technology |
Digital Potentiometer |
Automotive |
Gull Wing |
8 |
SOP |
Square |
Plastic/Epoxy |
Yes |
150 ppm/°C |
1 |
CMOS |
TS 16949 |
1 kHz |
Increment/Decrement |
Linear |
10 KΩ |
600 μA |
5.5 V |
2.7 V |
3/5 V |
Small Outline |
SOP8,.19 |
Digital Potentiometers |
0.026 in (0.65 mm) |
125 °C (257 °F) |
-40 °C (-40 °F) |
Matte Tin |
Dual |
0 V |
S-PDSO-G8 |
1 |
0.043 in (1.1 mm) |
20 % |
0.118 in (3 mm) |
No |
257 |
Non-volatile memory |
e3 |
40 s |
260 °C (500 °F) |
0.118 in (3 mm) |
||||
|
|
Microchip Technology |
Digital Potentiometer |
Automotive |
Gull Wing |
8 |
SOP |
Square |
Plastic/Epoxy |
Yes |
150 ppm/°C |
1 |
CMOS |
TS 16949 |
2 kHz |
Increment/Decrement |
Linear |
5 KΩ |
600 μA |
5.5 V |
2.7 V |
3/5 V |
Small Outline |
SOP8,.19 |
Digital Potentiometers |
0.026 in (0.65 mm) |
125 °C (257 °F) |
-40 °C (-40 °F) |
Matte Tin |
Dual |
0 V |
S-PDSO-G8 |
1 |
0.043 in (1.1 mm) |
20 % |
0.118 in (3 mm) |
No |
257 |
Non-volatile memory |
e3 |
40 s |
260 °C (500 °F) |
0.118 in (3 mm) |
||||
|
|
Microchip Technology |
Digital Potentiometer |
Automotive |
No Lead |
8 |
HVSON |
Square |
Plastic/Epoxy |
Yes |
150 ppm/°C |
1 |
CMOS |
TS 16949 |
200 Hz |
Increment/Decrement |
Linear |
50 KΩ |
600 μA |
5.5 V |
2.7 V |
3/5 V |
Small Outline, Heat Sink/Slug, Very Thin Profile |
SOLCC8,.12,25 |
Digital Potentiometers |
0.026 in (0.65 mm) |
125 °C (257 °F) |
-40 °C (-40 °F) |
Matte Tin |
Dual |
0 V |
S-PDSO-N8 |
1 |
0.039 in (1 mm) |
20 % |
0.118 in (3 mm) |
No |
257 |
Non-volatile memory |
e3 |
40 s |
260 °C (500 °F) |
0.118 in (3 mm) |
||||
|
|
Microchip Technology |
Digital Potentiometer |
Automotive |
Gull Wing |
14 |
TSSOP |
Rectangular |
Plastic/Epoxy |
Yes |
100 ppm/°C |
1 |
AEC-Q100; TS 16949 |
24 Hz |
2-Wire Serial |
Linear |
100 KΩ |
650 μA |
18 V |
3.5 V |
Small Outline, Thin Profile, Shrink Pitch |
TSSOP14,.25 |
0.026 in (0.65 mm) |
125 °C (257 °F) |
-40 °C (-40 °F) |
Matte Tin |
Dual |
-18 V |
R-PDSO-G14 |
1 |
0.047 in (1.2 mm) |
20 % |
0.173 in (4.4 mm) |
128 |
The resistor array values are 5000 Ω, 10000 Ω, 50000 Ω |
e3 |
40 s |
260 °C (500 °F) |
0.197 in (5 mm) |
||||||||
|
|
Microchip Technology |
Digital Potentiometer |
Automotive |
Gull Wing |
14 |
TSSOP |
Rectangular |
Plastic/Epoxy |
Yes |
100 ppm/°C |
1 |
AEC-Q100; TS 16949 |
24 Hz |
2-Wire Serial |
Linear |
100 KΩ |
650 μA |
18 V |
3.5 V |
Small Outline, Thin Profile, Shrink Pitch |
TSSOP14,.25 |
0.026 in (0.65 mm) |
125 °C (257 °F) |
-40 °C (-40 °F) |
Matte Tin |
Dual |
-18 V |
R-PDSO-G14 |
1 |
0.047 in (1.2 mm) |
20 % |
0.173 in (4.4 mm) |
128 |
The resistor array values are 5000 Ω, 10000 Ω, 50000 Ω |
e3 |
40 s |
260 °C (500 °F) |
0.197 in (5 mm) |
||||||||
|
|
Microchip Technology |
Digital Potentiometer |
Automotive |
Gull Wing |
14 |
TSSOP |
Rectangular |
Plastic/Epoxy |
Yes |
150 ppm/°C |
2 |
CMOS |
TS 16949 |
1 kHz |
Increment/Decrement |
Linear |
10 KΩ |
600 μA |
5.5 V |
2.7 V |
3/5 V |
Small Outline, Thin Profile, Shrink Pitch |
TSSOP14,.25 |
Digital Potentiometers |
0.026 in (0.65 mm) |
125 °C (257 °F) |
-40 °C (-40 °F) |
Matte Tin |
Dual |
0 V |
R-PDSO-G14 |
1 |
0.047 in (1.2 mm) |
20 % |
0.173 in (4.4 mm) |
No |
129 |
Non-volatile memory |
e3 |
40 s |
260 °C (500 °F) |
0.197 in (5 mm) |
||||
|
|
Microchip Technology |
Digital Potentiometer |
Automotive |
Gull Wing |
14 |
TSSOP |
Rectangular |
Plastic/Epoxy |
Yes |
150 ppm/°C |
2 |
CMOS |
TS 16949 |
2 kHz |
Increment/Decrement |
Linear |
5 KΩ |
600 μA |
5.5 V |
2.7 V |
3/5 V |
Small Outline, Thin Profile, Shrink Pitch |
TSSOP14,.25 |
Digital Potentiometers |
0.026 in (0.65 mm) |
125 °C (257 °F) |
-40 °C (-40 °F) |
Matte Tin |
Dual |
0 V |
R-PDSO-G14 |
1 |
0.047 in (1.2 mm) |
20 % |
0.173 in (4.4 mm) |
No |
129 |
Non-volatile memory |
e3 |
40 s |
260 °C (500 °F) |
0.197 in (5 mm) |
||||
|
|
Microchip Technology |
Digital Potentiometer |
Automotive |
No Lead |
16 |
HVQCCN |
Square |
Plastic/Epoxy |
Yes |
150 ppm/°C |
2 |
CMOS |
TS 16949 |
2 kHz |
2-Wire Serial |
Linear |
50 KΩ |
600 μA |
5.5 V |
3 V |
3/5 V |
Chip Carrier, Heat Sink/Slug, Very Thin Profile |
LCC16,.16SQ,25 |
Digital Potentiometers |
0.026 in (0.65 mm) |
125 °C (257 °F) |
-40 °C (-40 °F) |
Matte Tin - annealed |
Quad |
0 V |
S-PQCC-N16 |
1 |
0.039 in (1 mm) |
20 % |
0.157 in (4 mm) |
No |
257 |
e3 |
40 s |
260 °C (500 °F) |
0.157 in (4 mm) |
|||||
|
|
Microchip Technology |
Digital Potentiometer |
Automotive |
Gull Wing |
10 |
TSSOP |
Square |
Plastic/Epoxy |
Yes |
150 ppm/°C |
1 |
CMOS |
TS 16949 |
2 kHz |
2-Wire Serial |
Linear |
100 KΩ |
600 μA |
5.5 V |
3 V |
3/5 V |
Small Outline |
TSSOP10,.19,20 |
Digital Potentiometers |
0.02 in (0.5 mm) |
125 °C (257 °F) |
-40 °C (-40 °F) |
Matte Tin - annealed |
Dual |
0 V |
S-PDSO-G10 |
2 |
0.039 in (1 mm) |
20 % |
0.118 in (3 mm) |
No |
257 |
The resistor array values are 5000 Ω, 10000 Ω, 50000 Ω |
e3 |
40 s |
260 °C (500 °F) |
0.118 in (3 mm) |
||||
|
|
Microchip Technology |
Digital Potentiometer |
Automotive |
No Lead |
8 |
HVSON |
Square |
Plastic/Epoxy |
Yes |
150 ppm/°C |
1 |
CMOS |
TS 16949 |
2 kHz |
2-Wire Serial |
Linear |
100 KΩ |
600 μA |
5.5 V |
3 V |
3/5 V |
Small Outline, Heat Sink/Slug, Very Thin Profile |
SOLCC8,.12,25 |
Digital Potentiometers |
0.026 in (0.65 mm) |
125 °C (257 °F) |
-40 °C (-40 °F) |
Matte Tin - annealed |
Dual |
0 V |
S-PDSO-N8 |
1 |
0.039 in (1 mm) |
20 % |
0.118 in (3 mm) |
No |
257 |
The resistor array values are 5000 Ω, 10000 Ω, 50000 Ω |
e3 |
40 s |
260 °C (500 °F) |
0.118 in (3 mm) |
||||
|
|
Microchip Technology |
Digital Potentiometer |
Automotive |
Gull Wing |
14 |
TSSOP |
Rectangular |
Plastic/Epoxy |
Yes |
150 ppm/°C |
2 |
CMOS |
TS 16949 |
100 Hz |
Increment/Decrement |
Linear |
100 KΩ |
600 μA |
5.5 V |
2.7 V |
3/5 V |
Small Outline, Thin Profile, Shrink Pitch |
TSSOP14,.25 |
Digital Potentiometers |
0.026 in (0.65 mm) |
125 °C (257 °F) |
-40 °C (-40 °F) |
Matte Tin |
Dual |
0 V |
R-PDSO-G14 |
1 |
0.047 in (1.2 mm) |
20 % |
0.173 in (4.4 mm) |
No |
257 |
Non-volatile memory |
e3 |
260 °C (500 °F) |
0.197 in (5 mm) |
|||||
|
|
Microchip Technology |
Digital Potentiometer |
Automotive |
Gull Wing |
10 |
TSSOP |
Square |
Plastic/Epoxy |
Yes |
150 ppm/°C |
2 |
CMOS |
TS 16949 |
2 kHz |
Increment/Decrement |
Linear |
5 KΩ |
600 μA |
5.5 V |
2.7 V |
3/5 V |
Small Outline, Thin Profile, Shrink Pitch |
TSSOP10,.19,20 |
Digital Potentiometers |
0.02 in (0.5 mm) |
125 °C (257 °F) |
-40 °C (-40 °F) |
Matte Tin |
Dual |
0 V |
S-PDSO-G10 |
2 |
0.043 in (1.1 mm) |
20 % |
0.118 in (3 mm) |
No |
257 |
Non-volatile memory |
e3 |
40 s |
260 °C (500 °F) |
0.118 in (3 mm) |
||||
|
|
Microchip Technology |
Digital Potentiometer |
Automotive |
No Lead |
10 |
HVSON |
Square |
Plastic/Epoxy |
Yes |
150 ppm/°C |
2 |
CMOS |
TS 16949 |
2 kHz |
Increment/Decrement |
Linear |
5 KΩ |
600 μA |
5.5 V |
2.7 V |
3/5 V |
Small Outline, Heat Sink/Slug, Very Thin Profile |
SOLCC10,.12,20 |
Digital Potentiometers |
0.02 in (0.5 mm) |
125 °C (257 °F) |
-40 °C (-40 °F) |
Matte Tin |
Dual |
0 V |
S-PDSO-N10 |
1 |
0.039 in (1 mm) |
20 % |
0.118 in (3 mm) |
No |
257 |
Non-volatile memory |
e3 |
40 s |
260 °C (500 °F) |
0.118 in (3 mm) |
Digital potentiometers, also known as DigiPOTs, are electronic devices that allow the user to adjust the resistance of a circuit digitally. They are designed to replace traditional mechanical potentiometers and offer several advantages, such as greater precision, faster response, and remote control.
DigiPOTs consist of a set of resistive elements, divided into several segments, and a wiper that can be moved to change the resistance between two terminals. The position of the wiper is controlled by digital signals, which are decoded to select the appropriate resistance segment. DigiPOTs can be programmed to provide a specific resistance value or to change the resistance in response to a specific input signal.
DigiPOTs are used in a wide range of applications, such as audio amplifiers, motor control circuits, and power management systems. They offer several advantages over traditional potentiometers, such as faster response time, more precise adjustment, and greater reliability. DigiPOTs also eliminate the need for mechanical parts, which can wear out over time and require replacement.
DigiPOTs come in different configurations, including single, dual, and quad-channel versions, each with different resistance ranges and step sizes. They can be controlled by a microcontroller or other digital circuit, and some models offer features such as non-volatile memory, temperature compensation, and programmable resolution.