5000 ppm Ceramic Resonators 251

Reset All

Part	Manufacturer	Crystal or Resonator Type	Mounting Feature	Frequency Tolerance	Additional Features	Frequency Stability	Minimum Operating Temperature	Terminal Finish	JESD-609 Code	Nominal Operating Frequency	Physical Dimension	Manufacturer Series	Maximum Operating Temperature
ECS-HFR-20.00-B-TR	Ecs International	CERAMIC RESONATOR	SURFACE MOUNT	5000 ppm	TR	4000 %	-20 Cel			20 MHz	2.5mm X 2.0mm X 1.0mm		80 Cel
ECS-SR1-4.00-A-TR	Ecs International	CERAMIC RESONATOR	SURFACE MOUNT	5000 ppm	TR	3000 %	-20 Cel	Tin (Sn) - with Nickel (Ni) barrier	e3	4 MHz	7.5mm X 3.3mm X 1.8mm		80 Cel
ECS-SR1-8.00-A-TR	Ecs International	CERAMIC RESONATOR	SURFACE MOUNT	5000 ppm	TR	3000 %	-20 Cel	Tin/Nickel (Sn/Ni)	e2	8 MHz	7.5mm X 3.3mm X 1.8mm		80 Cel
KBR-4.0MSBTR	Kyocera	CERAMIC RESONATOR	THROUGH HOLE MOUNT	5000 ppm		3000 %	-20 Cel	Aluminum (Al)		4 MHz	10mm x 5mm x 7.5mm		80 Cel
PBRC-4.00AR	KYOCERA AVX	CERAMIC RESONATOR	SURFACE MOUNT	5000 ppm		3000 %	-20 Cel	Gold Flash (Au)		4 MHz	7.4mm x 3.4mm x 2mm		80 Cel
PBRC-8.00BR	KYOCERA AVX	CERAMIC RESONATOR	SURFACE MOUNT	5000 ppm		3000 %	-20 Cel	Gold (Au) - with Nickel (Ni) barrier	e4	8 MHz	7.4mm x 3.4mm x 2mm		80 Cel
PBRC12.00HR50X000	KYOCERA AVX	CERAMIC RESONATOR	SURFACE MOUNT	5000 ppm		5000 %	-40 Cel			12 MHz	7.4mm x 3.4mm x 2mm		85 Cel
PRQV8.00CR5010Y000	KYOCERA AVX	CERAMIC RESONATOR	SURFACE MOUNT	5000 ppm		5000 %	-40 Cel	Tin (Sn) - with Nickel (Ni) barrier	e3	8 MHz	3.2mm x 1.3mmx 1mm		125 Cel
ZTT-8.00MT	Ecs International	CERAMIC RESONATOR	THROUGH HOLE MOUNT	5000 ppm		3000 %	-20 Cel			8 MHz	10.0mm x 5.0mm x 10.0mm		80 Cel
ZTTCC4.00MG	Shoulder Electronics	CERAMIC RESONATOR	SURFACE MOUNT	5000 ppm	BAG; BOX; TAPE AND REEL	3000 %	-25 Cel			4 MHz	L7.4XB3.4XH1.8 (mm)/L0.291XB0.134XH0.071 (inch)		85 Cel
DECRHTC4.00	Renesas Electronics	CERAMIC RESONATOR	SURFACE MOUNT	5000 ppm	BUILT IN CAPACITOR	2000 %	-20 Cel			4 MHz	L4.5XB2.0XH1.15 (mm)/L0.177XB0.079XH0.045 (inch)	ECRHTC	80 Cel

Ceramic Resonators

Ceramic resonators are electronic components that are used to generate stable and precise frequency signals for various applications. They are small, compact, and easy to use, making them a popular choice in many electronic devices and systems.

Ceramic resonators consist of a ceramic disk that is coated with metal electrodes on both sides. The disk is designed to vibrate at a specific frequency when an AC voltage is applied across the electrodes. The resonance frequency is determined by the dimensions of the disk and the properties of the ceramic material, which have a high Q-factor and temperature stability.

Ceramic resonators are used in a wide range of applications, such as clocks, timers, sensors, and remote controls. They offer several advantages over other types of resonators, such as quartz crystal resonators, including lower cost, smaller size, and simpler circuit design.

Ceramic resonators come in different frequencies, ranging from a few kilohertz to several megahertz, and they are available in various packages, including through-hole and surface-mount. They are also available in different tolerances and stability levels, depending on the application and the required performance.