Microchip Technology Voltage Multipliers 0
| Part | RoHS | Manufacturer | Diode Type | Terminal Position | Terminal Form | No. of Terminals | Surface Mount | Package Shape | Package Body Material | Config | Maximum Output Current | No. of Elements | Package Style (Meter) | JESD-30 Code | Case Connection | Qualification | Maximum Time At Peak Reflow Temperature (s) | Peak Reflow Temperature (C) | Diode Element Material |
|---|
Voltage multipliers are electronic circuits that are used to increase the voltage of an input signal. They are commonly used in high voltage applications, such as power supplies, x-ray generators, and particle accelerators.
Voltage multipliers work by combining multiple stages of diodes and capacitors to produce a high-voltage output. The basic voltage multiplier circuit is the half-wave rectifier, which consists of a diode and a capacitor. When an AC voltage is applied to the diode, it conducts during the positive half-cycle, charging the capacitor. During the negative half-cycle, the diode blocks the current, and the capacitor discharges through a load resistor, producing a rectified output.
To increase the voltage of the output, multiple stages of the half-wave rectifier can be combined in series or parallel. This produces a voltage multiplier circuit that can produce an output voltage that is several times higher than the input voltage.
There are several types of voltage multiplier circuits, including:
1. Cockcroft-Walton multiplier: The Cockcroft-Walton multiplier uses a series of diodes and capacitors to produce a high-voltage DC output. It is commonly used in particle accelerators and x-ray generators.
2. Voltage doubler: The voltage doubler uses two stages of the half-wave rectifier to produce a DC output voltage that is double the input voltage.
3. Voltage tripler: The voltage tripler uses three stages of the half-wave rectifier to produce a DC output voltage that is three times the input voltage.
Voltage multipliers come in different configurations and ratings, depending on the application and the required performance. They can be integrated into a circuit board or mounted in a separate enclosure, depending on the application and the space available.