MATTE TIN Fiber Optics - Receivers 6

Reset All

Part	Manufacturer	Fiber Optic Type	Mounting Feature	Maximum Supply Voltage	Terminal Finish	Maximum Operating Temperature	Emitter or Detector Type	Responsivity	Fiber Type	Nominal Supply Voltage	Body Length/Diameter	Body Width	Package Style (Meter)	Reception Type	Sub-Category	Body Height	Nominal Operating Wavelength	Minimum Supply Voltage	Minimum Operating Wavelength	Maximum Operating Wavelength	Data Rate	Additional Features	JESD-609 Code	Built-in Features	Sensitivity Level
HFBR-2521Z	Broadcom	RECEIVER	THROUGH HOLE MOUNT	5.25 V	MATTE TIN	70 Cel			POF	5 V	18.8 mm		DIP	DIGITAL	Fiber Optic Receivers	7.62 mm	660 nm	4.75 V			5 Mbps		e3
HFBR-2522Z	Broadcom	RECEIVER	THROUGH HOLE MOUNT	5.25 V	MATTE TIN	70 Cel			POF	5 V	18.8 mm		DIP	DIGITAL	Fiber Optic Receivers	7.62 mm	660 nm	4.75 V			1 Mbps		e3
HFBR-2526Z	Broadcom	RECEIVER	THROUGH HOLE MOUNT	5.25 V	MATTE TIN	70 Cel	PIN PHOTODIODE	3.9 A/W	HCS, POF	5 V	18.8 mm	10.2 inch		ANALOG	Fiber Optic Receivers	7.62 mm	650 nm	4.75 V	640 nm	660 nm	125 Mbps	IT HAS AC RESPONSIVITY 1 MM POF OF 3.9 MV/MICRO WATT, IT ALSO HAVE RECEIVER SENSITIVITY OF -28.5 DBM	e3	AMPLIFIER	-27.5 dBm
HFBR-2524Z	Broadcom	RECEIVER	THROUGH HOLE MOUNT	5.25 V	MATTE TIN	70 Cel			POF	5 V	18.8 mm		DIP	DIGITAL	Fiber Optic Receivers	7.62 mm	660 nm	4.75 V			1 Mbps		e3
HFBR-2523Z	Broadcom	RECEIVER	THROUGH HOLE MOUNT	5.5 V	MATTE TIN	70 Cel			POF	5 V	18.8 mm		DIP	DIGITAL	Fiber Optic Receivers	7.62 mm	660 nm	4.5 V			.04 Mbps		e3
HFBR-2533Z	Broadcom	RECEIVER	THROUGH HOLE MOUNT	5.5 V	MATTE TIN	70 Cel			POF	5 V	18.3 mm	7.62 inch	DIP	DIGITAL	Fiber Optic Receivers	18.8 mm	660 nm	4.5 V			.04 Mbps		e3

Fiber Optics - Receivers

Fiber optic receivers are electronic devices that are used in fiber optic communication systems to detect and convert optical signals into electrical signals. They are a critical component of fiber optic networks, enabling high-speed data transmission and processing over long distances.

Fiber optic receivers typically consist of a photodetector, an amplifier, and a demodulator. The photodetector detects the optical signal and converts it into an electrical signal. The amplifier amplifies the electrical signal, making it strong enough for further processing. The demodulator extracts the data from the electrical signal, enabling it to be decoded and processed by the receiving device.

There are different types of photodetectors used in fiber optic receivers, including PIN photodiodes, avalanche photodiodes, and photomultiplier tubes. These photodetectors convert the incoming optical signal into an electrical current, which is then amplified and demodulated.

Fiber optic receivers come in different configurations and designs, depending on the application and the required performance. They can be integrated into a fiber optic network or mounted in a separate enclosure, depending on the application and the space available.