Analog Devices Fiber Optics - Receivers 4

Reset All

Part	Manufacturer	Fiber Optic Type	Mounting Feature	Maximum Supply Voltage	Maximum Operating Temperature	Minimum Operating Temperature	Emitter or Detector Type	Fiber Type	Nominal Supply Voltage	Packing Method	Body Length/Diameter	Body Width	Body Height	Nominal Operating Wavelength	Minimum Supply Voltage	Minimum Operating Wavelength	Communication Standard	Maximum Operating Wavelength	Data Rate	Built-in Features	Sensitivity Level
ADN3010-11-50A-DF	Analog Devices	RECEIVER	SURFACE MOUNT	3.6 V	85 Cel	-40 Cel		SMF	3.3 V	TR	.835 mm	.675 inch	.245 mm	1310 nm	3 V	850 nm	SONET	1565 nm	1412.5 Mbps	AMPLIFIER, PIN PHOTODIODE	-16.5 dBm
ADN3010-11-50A-RL7	Analog Devices	RECEIVER	SURFACE MOUNT	3.6 V	85 Cel	-40 Cel		SMF	3.3 V	TR	.835 mm	.675 inch	.245 mm	1310 nm	3 V	850 nm	SONET	1565 nm	1412.5 Mbps	AMPLIFIER, PIN PHOTODIODE	-16.5 dBm
ADN3010-11-50A-WP	Analog Devices	RECEIVER	SURFACE MOUNT	3.6 V	85 Cel	-40 Cel		SMF	3.3 V	TR	.835 mm	.675 inch	.245 mm	1310 nm	3 V	850 nm	SONET	1565 nm	1412.5 Mbps	AMPLIFIER, PIN PHOTODIODE	-16.5 dBm
ADN3010-11-50A-R2	Analog Devices	RECEIVER	SURFACE MOUNT	3.6 V	85 Cel	-40 Cel	PHOTODIODE	SMF	3.3 V		.835 mm	.675 inch	.245 mm	1310 nm	3 V	850 nm	ETHERNET, SONET	1565 nm	11300 Mbps	AMPLIFIER, PIN PHOTODIODE

Fiber Optics - Receivers

Fiber optic receivers are electronic devices that are used in fiber optic communication systems to detect and convert optical signals into electrical signals. They are a critical component of fiber optic networks, enabling high-speed data transmission and processing over long distances.

Fiber optic receivers typically consist of a photodetector, an amplifier, and a demodulator. The photodetector detects the optical signal and converts it into an electrical signal. The amplifier amplifies the electrical signal, making it strong enough for further processing. The demodulator extracts the data from the electrical signal, enabling it to be decoded and processed by the receiving device.

There are different types of photodetectors used in fiber optic receivers, including PIN photodiodes, avalanche photodiodes, and photomultiplier tubes. These photodetectors convert the incoming optical signal into an electrical current, which is then amplified and demodulated.

Fiber optic receivers come in different configurations and designs, depending on the application and the required performance. They can be integrated into a fiber optic network or mounted in a separate enclosure, depending on the application and the space available.