Broadcom Fiber Optics - Receivers 179

Reset All

Part	Manufacturer	Fiber Optic Type	Mounting Feature	Maximum Supply Voltage	Terminal Finish	Maximum Operating Temperature	Minimum Operating Temperature	Emitter or Detector Type	Responsivity	Fiber Type	Connection Type	Nominal Supply Voltage	Body Length/Diameter	Body Width	Package Style (Meter)	Reception Type	Sub-Category	Body Height	Nominal Operating Wavelength	Minimum Supply Voltage	Minimum Operating Wavelength	Maximum Operating Wavelength	Data Rate	Minimum Return Loss	Additional Features	JESD-609 Code	Built-in Features	Sensitivity Level
HFBR-2533Z	Broadcom	RECEIVER	THROUGH HOLE MOUNT	5.5 V	MATTE TIN	70 Cel	0 Cel			POF		5 V	18.3 mm	7.62 inch	DIP	DIGITAL	Fiber Optic Receivers	18.8 mm	660 nm	4.5 V			.04 Mbps			e3
AFBR-2419TZ	Broadcom	RECEIVER	THROUGH HOLE MOUNT	5.25 V	TIN	85 Cel	-40 Cel	PHOTODIODE	.65 A/W	62.5/125, MMF	ST CONNECTOR	3.3 V	12.7 mm	12.7 inch	DIP	DIGITAL	Fiber Optic Receivers	10.2 mm	820 nm	3.135 V	792 nm	865 nm			IT ALSO HAS NOMINAL SUPPLY VOLTAGE 5 VOLTS	e3
AFBR-2555ARZ	Broadcom	RECEIVER			Tin (Sn)																					e3
AFBR-2644Z	Broadcom	RECEIVER	THROUGH HOLE MOUNT	5.25 V	TIN	85 Cel	-40 Cel										Fiber Optic Receivers		658 nm							e3
HFBR-2406Z	Broadcom	RECEIVER	THROUGH HOLE MOUNT	5.25 V		85 Cel	-40 Cel	PIN PHOTODIODE		62.5/125, MMF	SMA CONNECTOR	5 V	22.2 mm	12.7 inch		ANALOG	Fiber Optic Receivers	10.2 mm	820 nm	4.75 V			160 Mbps		OTHER FIBER SIZES: 50/125; 100/140; 200; HCS, DATA RATE(MBD): 5; 20; 32; 55; 125; 155		AMPLIFIER	-34.4 dBm
HFBR-2505C	Broadcom	RECEIVER	THROUGH HOLE MOUNT	5.25 V	Tin/Lead (Sn/Pb)	70 Cel	0 Cel	PIN PHOTODIODE		POF	SMA CONNECTOR	5 V	16.1 mm	12.5 inch		DIGITAL	Fiber Optic Receivers		650 nm	4.75 V			2 Mbps			e0
HFBR-2521	Broadcom	RECEIVER	THROUGH HOLE MOUNT	5.25 V	Tin/Lead (Sn/Pb)	70 Cel	0 Cel					5 V	18.8 mm	10.2 inch	DIP	DIGITAL	Fiber Optic Receivers	7.6 mm	660 nm	4.75 V			5 Mbps			e0
HFBR-2521ETZ	Broadcom	RECEIVER	THROUGH HOLE MOUNT	5.25 V	TIN	85 Cel	-40 Cel	LED		POF		5 V				DIGITAL	Fiber Optic Receivers		660 nm	4.75 V			5 Mbps			e3
AFBR-2531CZ	Broadcom	RECEIVER	THROUGH HOLE MOUNT	5.25 V	Tin (Sn)	85 Cel	-40 Cel										Fiber Optic Receivers		650 nm							e3
AFBR-2539Z	Broadcom	RECEIVER			Tin (Sn)																					e3
HFBR-2505AZ	Broadcom	RECEIVER	THROUGH HOLE MOUNT	5.25 V	TIN	70 Cel	0 Cel	PIN PHOTODIODE		POF	SMA CONNECTOR	5 V	16.1 mm	12.5 inch		DIGITAL	Fiber Optic Receivers		650 nm	4.75 V			10 Mbps			e3
HFBR-2533	Broadcom	RECEIVER	THROUGH HOLE MOUNT	5.25 V	Tin/Lead (Sn/Pb)	70 Cel	0 Cel			POF		5 V	18.3 mm	10.2 inch		DIGITAL	Fiber Optic Receivers	18.8 mm	660 nm	4.75 V						e0
HFBR-2541ETZ	Broadcom	RECEIVER	THROUGH HOLE MOUNT	5.25 V	TIN	85 Cel	-40 Cel	LED		POF		5 V				DIGITAL	Fiber Optic Receivers			4.75 V						e3
HFBR-2602	Broadcom	RECEIVER	THROUGH HOLE MOUNT	5.25 V	Tin/Lead (Sn/Pb)	55 Cel	0 Cel	LED		POF	SMA CONNECTOR	5 V	12.7 mm	12.7 inch		DIGITAL	Fiber Optic Receivers	10.2 mm	655 nm	4.75 V			2 Mbps			e0	AMPLIFIER
SFH551/1VE9557	Broadcom	RECEIVER	THROUGH HOLE MOUNT	5.5 V		85 Cel	-40 Cel	PIN PHOTODIODE		POF			24 mm	9 inch		DIGITAL		8.8 mm	700 nm				5 Mbps				AMPLIFIER
AFBR-2150L	Broadcom	RECEIVER	THROUGH HOLE MOUNT	3.465 V		95 Cel	-40 Cel	PHOTODIODE		POF		3.3 V		2.72 inch		DIGITAL	Fiber Optic Receivers		650 nm	3.135 V	635 nm	675 nm	150 Mbps				AMPLIFIER
AFBR-821FH1Z	Broadcom	RECEIVER		3.3 V		70 Cel	0 Cel										Fiber Optic Receivers		850 nm
SPFMPR302	Broadcom	RECEIVER	THROUGH HOLE MOUNT	5.25 V		85 Cel	-40 Cel	PIN PHOTODIODE		POF		5 V	9.6 mm	3.4 inch		DIGITAL	Fiber Optic Receivers	6.2 mm	850 nm	4.75 V			25 Mbps				AMPLIFIER	-24.5 dBm
AFBR-2010T	Broadcom	RECEIVER	THROUGH HOLE MOUNT-RIGHT ANGLE	5.25 V	Tin/Lead (Sn/Pb)	95 Cel	-40 Cel	PIN PHOTODIODE		POF		5 V	7.2 mm	7 inch		DIGITAL		2.72 mm	650 nm	4.75 V	630 nm	685 nm	50 Mbps			e0	AMPLIFIER
AFBR-78D13SZ	Broadcom	RECEIVER
AFBR-785BZ	Broadcom	RECEIVER	PANEL MOUNT	2.625 V		80 Cel	0 Cel	PIN PHOTODIODE		MMF		2.5 V				DIGITAL	Fiber Optic Receivers		850 nm	2.375 V	830 nm	860 nm		12 dB	IT ALSO HAS SUPPLY VOLTAGE 3.135 TO 3.465 VOLTS AND REFERENCE STANDARDS-CENELEC, FCC, FDA, IEEE-P802.3AE, JESD22-A114-B, JESD22-A115-A		AMPLIFIER
AFBR-2010	Broadcom	RECEIVER	THROUGH HOLE MOUNT	5.25 V	Tin/Lead (Sn/Pb)	95 Cel	-40 Cel	PIN PHOTODIODE		POF		5 V	7.2 mm	7 inch		DIGITAL		2.72 mm	650 nm	4.75 V	630 nm	685 nm	50 Mbps			e0	AMPLIFIER
AFBR-2409Z	Broadcom	RECEIVER	THROUGH HOLE MOUNT	5.25 V	TIN	85 Cel	-40 Cel	PHOTODIODE	.65 A/W	62.5/125, MMF	SMA CONNECTOR	3.3 V	12.7 mm	12.7 inch	DIP	DIGITAL	Fiber Optic Receivers	10.2 mm	820 nm	3.135 V	792 nm	865 nm			IT ALSO HAS NOMINAL SUPPLY VOLTAGE 5 VOLTS	e3
AFBR-824FN1Z	Broadcom	RECEIVER		3.3 V		70 Cel	0 Cel										Fiber Optic Receivers		850 nm
AFBR-2153L	Broadcom	RECEIVER	THROUGH HOLE MOUNT	3.465 V		95 Cel	-40 Cel										Fiber Optic Receivers		650 nm
AFBR-821FH3Z	Broadcom	RECEIVER
AFBR-742BZ	Broadcom	RECEIVER	BOARD/PANEL MOUNT	3.465 V		80 Cel	0 Cel	PIN PHOTODIODE		50/125, MMF		3.3 V	34.12 mm	17.5 inch		DIGITAL	Fiber Optic Receivers	12.9 mm	850 nm	3.135 V	830 nm	860 nm	2500 Mbps	12 dB	10 X 10 ARRYA		AMPLIFIER	-11.8 dBm
AFBR-822RH1Z	Broadcom	RECEIVER		3.3 V		70 Cel	0 Cel										Fiber Optic Receivers		850 nm
AFBR-785BEZ	Broadcom	RECEIVER	PANEL MOUNT	2.625 V		80 Cel	0 Cel	PIN PHOTODIODE		MMF		2.5 V				DIGITAL	Fiber Optic Receivers		850 nm	2.375 V	830 nm	860 nm		12 dB	IT ALSO HAS SUPPLY VOLTAGE 3.135 TO 3.465 VOLTS AND REFERENCE STANDARDS-CENELEC, FCC, FDA, IEEE-P802.3AE, JESD22-A114-B, JESD22-A115-A		AMPLIFIER
AFBR-78D1Z	Broadcom	RECEIVER	SURFACE MOUNT			85 Cel	20 Cel										Fiber Optic Receivers		850 nm
AFBR-2012M	Broadcom	RECEIVER	THROUGH HOLE MOUNT	3.465 V		95 Cel	-40 Cel					3.3 V				DIGITAL	Fiber Optic Receivers		650 nm	3.135 V	630 nm	685 nm			IT ALSO HAS SUPPLY VOLTAGE 4.75 TO 5.25 VOLTS			-25 dBm
AFBR-785BHZ	Broadcom	RECEIVER	PANEL MOUNT	2.625 V		80 Cel	0 Cel	PIN PHOTODIODE		MMF		2.5 V				DIGITAL	Fiber Optic Receivers		850 nm	2.375 V	830 nm	860 nm		12 dB	IT ALSO HAS SUPPLY VOLTAGE 3.135 TO 3.465 VOLTS AND REFERENCE STANDARDS-CENELEC, FCC, FDA, IEEE-P802.3AE, JESD22-A114-B, JESD22-A115-A		AMPLIFIER
AFBR-824FH1Z	Broadcom	RECEIVER		3.3 V		70 Cel	0 Cel										Fiber Optic Receivers		850 nm
AFBR-821FN3Z	Broadcom	RECEIVER
AFBR-742BEZ	Broadcom	RECEIVER	BOARD/PANEL MOUNT	3.465 V		80 Cel	0 Cel	PIN PHOTODIODE		50/125, MMF		3.3 V	34.12 mm	17.5 inch		DIGITAL	Fiber Optic Receivers	13.12 mm	850 nm	3.135 V	830 nm	860 nm	2500 Mbps	12 dB	10 X 10 ARRYA		AMPLIFIER	-11.8 dBm
ODINMOR402	Broadcom	RECEIVER	THROUGH HOLE MOUNT	3.465 V		95 Cel	-40 Cel	PIN PHOTODIODE		POF		3.3 V	9.6 mm	3.4 inch		DIGITAL	Fiber Optic Receivers	6.2 mm	650 nm	3.135 V	630 nm	685 nm	25 Mbps		IT ALSO OPERATES VOLTAGE RANGES FROM 4.75V TO 5.25V			-25 dBm
AFBR-2012S	Broadcom	RECEIVER	THROUGH HOLE MOUNT	3.465 V		95 Cel	-40 Cel					3.3 V		2.72 inch		DIGITAL	Fiber Optic Receivers		650 nm	3.135 V	630 nm	685 nm			IT ALSO HAS SUPPLY VOLTAGE 4.75 TO 5.25 VOLTS			-25 dBm
AFBR-786BEHZ	Broadcom	RECEIVER	PANEL MOUNT	2.625 V		80 Cel	0 Cel	PIN PHOTODIODE		MMF		2.5 V				DIGITAL	Fiber Optic Receivers		850 nm	2.375 V	830 nm	860 nm		12 dB	IT ALSO HAS SUPPLY VOLTAGE 3.135 TO 3.465 VOLTS AND REFERENCE STANDARDS-CENELEC, FCC, FDA, IEEE-P802.3AE, JESD22-A114-B, JESD22-A115-A		AMPLIFIER
AFBR-822RN1Z	Broadcom	RECEIVER		3.3 V		70 Cel	0 Cel										Fiber Optic Receivers		850 nm
AFBR-785BEHZ	Broadcom	RECEIVER	PANEL MOUNT	2.625 V		80 Cel	0 Cel	PIN PHOTODIODE		MMF		2.5 V				DIGITAL	Fiber Optic Receivers		850 nm	2.375 V	830 nm	860 nm		12 dB	IT ALSO HAS SUPPLY VOLTAGE 3.135 TO 3.465 VOLTS AND REFERENCE STANDARDS-CENELEC, FCC, FDA, IEEE-P802.3AE, JESD22-A114-B, JESD22-A115-A		AMPLIFIER
AFBR-824RH1Z	Broadcom	RECEIVER		3.3 V		70 Cel	0 Cel										Fiber Optic Receivers		850 nm
AFBR-785BEPZ	Broadcom	RECEIVER	PANEL MOUNT	2.625 V		80 Cel	0 Cel	PIN PHOTODIODE		MMF		2.5 V				DIGITAL	Fiber Optic Receivers		850 nm	2.375 V	830 nm	860 nm		12 dB	IT ALSO HAS SUPPLY VOLTAGE 3.135 TO 3.465 VOLTS AND REFERENCE STANDARDS-CENELEC, FCC, FDA, IEEE-P802.3AE, JESD22-A114-B, JESD22-A115-A		AMPLIFIER
AFBR-2419MZ	Broadcom	RECEIVER	THROUGH HOLE MOUNT	5.25 V	TIN	85 Cel	-40 Cel	PHOTODIODE	.65 A/W	62.5/125, MMF	ST CONNECTOR	3.3 V	12.7 mm	12.7 inch	DIP	DIGITAL	Fiber Optic Receivers	10.2 mm	820 nm	3.135 V	792 nm	865 nm			IT ALSO HAS NOMINAL SUPPLY VOLTAGE 5 VOLTS	e3
AFBR-786BEPZ	Broadcom	RECEIVER	PANEL MOUNT	2.625 V		80 Cel	0 Cel	PIN PHOTODIODE		MMF		2.5 V				DIGITAL	Fiber Optic Receivers		850 nm	2.375 V	830 nm	860 nm		12 dB	IT ALSO HAS SUPPLY VOLTAGE 3.135 TO 3.465 VOLTS AND REFERENCE STANDARDS-CENELEC, FCC, FDA, IEEE-P802.3AE, JESD22-A114-B, JESD22-A115-A		AMPLIFIER
ODINMPR402	Broadcom	RECEIVER	THROUGH HOLE MOUNT	3.465 V		95 Cel	-40 Cel	PIN PHOTODIODE		POF		3.3 V	9.6 mm	3.4 inch		DIGITAL	Fiber Optic Receivers	6.2 mm	650 nm	3.135 V	630 nm	685 nm	25 Mbps		IT ALSO OPERATES VOLTAGE RANGES FROM 4.75V TO 5.25V			-25 dBm
AFBR-2541CZ	Broadcom	RECEIVER	THROUGH HOLE MOUNT	3.465 V	Tin (Sn)	95 Cel	-40 Cel			POF		3.3 V				DIGITAL	Fiber Optic Receivers		650 nm	3.135 V					IT ALSO OPERATES AT 5V NOMINAL SUPPLY VOLTAGE	e3	PHOTODIODE
AFBR-78D4SZ	Broadcom	RECEIVER	SURFACE MOUNT			70 Cel	0 Cel										Fiber Optic Receivers		850 nm
SPFMOR302	Broadcom	RECEIVER	THROUGH HOLE MOUNT	5.25 V		85 Cel	-40 Cel	PIN PHOTODIODE		POF		5 V	9.6 mm	3.4 inch		DIGITAL		6.2 mm	850 nm	4.75 V			25 Mbps				AMPLIFIER	-24.5 dBm

Fiber Optics - Receivers

Fiber optic receivers are electronic devices that are used in fiber optic communication systems to detect and convert optical signals into electrical signals. They are a critical component of fiber optic networks, enabling high-speed data transmission and processing over long distances.

Fiber optic receivers typically consist of a photodetector, an amplifier, and a demodulator. The photodetector detects the optical signal and converts it into an electrical signal. The amplifier amplifies the electrical signal, making it strong enough for further processing. The demodulator extracts the data from the electrical signal, enabling it to be decoded and processed by the receiving device.

There are different types of photodetectors used in fiber optic receivers, including PIN photodiodes, avalanche photodiodes, and photomultiplier tubes. These photodetectors convert the incoming optical signal into an electrical current, which is then amplified and demodulated.

Fiber optic receivers come in different configurations and designs, depending on the application and the required performance. They can be integrated into a fiber optic network or mounted in a separate enclosure, depending on the application and the space available.