SFP TRANSCEIVER Fiber Optics - Transceivers 12

Reset All

Part	Manufacturer	Fiber Optic Type	Mounting Feature	Maximum Supply Voltage	Terminal Finish	Maximum Operating Temperature	Minimum Operating Temperature	Rx Data Rate	Tx Data Rate	Emitter or Detector Type	Fiber Type	Nominal Optical Power Output	Connection Type	Nominal Supply Voltage	Body Length/Diameter	Body Width	Body Height	Nominal Operating Wavelength	Minimum Supply Voltage	Minimum Operating Wavelength	Communication Standard	Maximum Operating Wavelength	Minimum Return Loss	Additional Features	JESD-609 Code	Built-in Features	Sensitivity Level
FXC-SFP100M-31-FX	Infinite Electronics International	SFP TRANSCEIVER
FXC-SFPOC48-55-80	Infinite Electronics International	SFP TRANSCEIVER
FXC-SFPD44LR2OC48ARS	L-com	SFP TRANSCEIVER
FXC-SFP100M-85-SX	Infinite Electronics International	SFP TRANSCEIVER
FXC-SFP1G-55-120	Infinite Electronics International	SFP TRANSCEIVER	BOARD/PANEL MOUNT			70 Cel	0 Cel	1250 Mbps	1250 Mbps		SMF	1.77 mW	LC DUPLEX CONNECTOR		57.4 mm	13.4 inch	8.45 mm	1550 nm		1500 nm	GBE	1580 nm		IT ALSO HAS RECEIVER WAVELENGTH 1260 TO 1600 NM			-32 dBm
AFBR-57B4APZ	Broadcom	SFP TRANSCEIVER			Tin (Sn)																				e3
AFBR-57G5MZ	Broadcom	SFP TRANSCEIVER
AFBR-5718APZ	Broadcom	SFP TRANSCEIVER	PANEL MOUNT	3.47 V		85 Cel	-10 Cel	1250 Mbps	1250 Mbps	VCSEL	50/125, 62.5/125, MMF	.223 mW	LC CONNECTOR	3.3 V	56.49 mm	13.4 inch	8.6 mm	850 nm	3.14 V	830 nm	GBE	860 nm				PIN PHOTODIODE	-17 dBm
AFBR-57G5AMZ	Broadcom	SFP TRANSCEIVER	PANEL MOUNT	3.465 V		85 Cel	0 Cel	28050 Mbps	28050 Mbps	VCSEL	50/125, 62.5/125, MMF		LC DUPLEX CONNECTOR	3.3 V	56.49 mm	13.46 inch	8.5 mm	850 nm	3.135 V	840 nm		860 nm	12 dB			AMPLIFIER, PIN PHOTODIODE
AFBR-5718PZ	Broadcom	SFP TRANSCEIVER	BOARD/PANEL MOUNT	3.47 V		85 Cel	-10 Cel	1250 Mbps	1250 Mbps	PIN PHOTO DETECTOR, VCSEL LASER	50/125, 62.5/125, MMF	.223 mW	LC CONNECTOR	3.3 V	56.49 mm	13.4 inch	8.6 mm	850 nm	3.14 V	830 nm	GBE, GR-1089	860 nm				AMPLIFIER, LASER DRIVER	-17 dBm
AFCT-57H5MZ	Broadcom	SFP TRANSCEIVER
AFBR-52H5PZ	Broadcom	SFP TRANSCEIVER

Fiber Optics - Transceivers

Fiber optic transceivers are electronic devices that are used in fiber optic communication systems to transmit and receive optical signals. They are designed to both transmit and receive data over a fiber optic network, allowing for two-way communication between devices.

Fiber optic transceivers typically consist of a transmitter, a receiver, and control circuitry. The transmitter converts electrical signals into optical signals, which are then transmitted over the fiber optic cable. The receiver converts the incoming optical signal into an electrical signal, which is then processed by the control circuitry.

Fiber optic transceivers use different technologies to transmit and receive optical signals, including:

1. Direct modulation: Direct modulation uses an LED or laser diode to directly modulate the optical signal in response to an electrical signal.

2. External modulation: External modulation uses an electro-optic modulator to modulate the optical signal in response to an electrical signal.

3. Coherent detection: Coherent detection uses a local oscillator to synchronize the optical signal with a reference signal, enabling precise phase and amplitude measurements of the optical signal.

Fiber optic transceivers come in different configurations and designs, depending on the application and the required performance. They can be integrated into a fiber optic network or mounted in a separate enclosure, depending on the application and the space available.