85 Cel Fiber Optics - Transceivers 586

Reset All

Part	Manufacturer	Fiber Optic Type	Mounting Feature	Maximum Supply Voltage	Maximum Operating Temperature	Minimum Operating Temperature	Rx Data Rate	Tx Data Rate	Emitter or Detector Type	Fiber Type	Nominal Optical Power Output	Connection Type	Nominal Supply Voltage	Body Length/Diameter	Body Width	Sub-Category	Body Height	Nominal Operating Wavelength	Minimum Supply Voltage	Minimum Operating Wavelength	Communication Standard	Maximum Operating Wavelength	Built-in Features	Sensitivity Level
AFBR-734ASMZ	Broadcom	TRANSCEIVER	PANEL MOUNT	3.465 V	85 Cel	0 Cel	25781.25 Mbps	25781.25 Mbps	VCSEL	50/125, MMF	.5 mW	LC DUPLEX CONNECTOR	3.3 V	56.49 mm	13.46 inch		8.5 mm	850 nm	3.135 V	840 nm	GBE	860 nm	AMPLIFIER, PIN PHOTODIODE	-5.2 dBm
AFBR-FS13B25	Broadcom	TRANSCEIVER		3.47 V	85 Cel	-10 Cel	1250 Mbps	1250 Mbps	VCSEL				3.3 V	5.25 mm	5.25 inch		4.9 mm	850 nm	3.13 V	830 nm		860 nm	AMPLIFIER, PIN PHOTODIODE
AFBR-5718PZ	Broadcom	SFP TRANSCEIVER	BOARD/PANEL MOUNT	3.47 V	85 Cel	-10 Cel	1250 Mbps	1250 Mbps	PIN PHOTO DETECTOR, VCSEL LASER	50/125, 62.5/125, MMF	.223 mW	LC CONNECTOR	3.3 V	56.49 mm	13.4 inch		8.6 mm	850 nm	3.14 V	830 nm	GBE, GR-1089	860 nm	AMPLIFIER, LASER DRIVER	-17 dBm
TR113LA-0D30S	Samsung	TRANSCEIVER	THROUGH HOLE MOUNT	3.6 V	85 Cel	-40 Cel										Fiber Optic Transceivers		1310 nm
TR134LA-0A10S	Samsung	TRANSCEIVER	THROUGH HOLE MOUNT	3.47 V	85 Cel	-40 Cel										Fiber Optic Transceivers		1310 nm
TR134LA-0D30S	Samsung	TRANSCEIVER	THROUGH HOLE MOUNT	3.47 V	85 Cel	-40 Cel										Fiber Optic Transceivers		1310 nm
TR137FA-0D30S	Samsung	TRANSCEIVER		3.5 V	85 Cel	-40 Cel										Fiber Optic Transceivers		1310 nm
TR117FA-0D40S	Samsung	TRANSCEIVER		3.5 V	85 Cel	-40 Cel										Fiber Optic Transceivers		1310 nm
TR117FA-0D30S	Samsung	TRANSCEIVER		3.5 V	85 Cel	-40 Cel										Fiber Optic Transceivers		1310 nm
TR113LA-0D40S	Samsung	TRANSCEIVER	THROUGH HOLE MOUNT	3.6 V	85 Cel	-40 Cel										Fiber Optic Transceivers		1310 nm

Fiber Optics - Transceivers

Fiber optic transceivers are electronic devices that are used in fiber optic communication systems to transmit and receive optical signals. They are designed to both transmit and receive data over a fiber optic network, allowing for two-way communication between devices.

Fiber optic transceivers typically consist of a transmitter, a receiver, and control circuitry. The transmitter converts electrical signals into optical signals, which are then transmitted over the fiber optic cable. The receiver converts the incoming optical signal into an electrical signal, which is then processed by the control circuitry.

Fiber optic transceivers use different technologies to transmit and receive optical signals, including:

1. Direct modulation: Direct modulation uses an LED or laser diode to directly modulate the optical signal in response to an electrical signal.

2. External modulation: External modulation uses an electro-optic modulator to modulate the optical signal in response to an electrical signal.

3. Coherent detection: Coherent detection uses a local oscillator to synchronize the optical signal with a reference signal, enabling precise phase and amplitude measurements of the optical signal.

Fiber optic transceivers come in different configurations and designs, depending on the application and the required performance. They can be integrated into a fiber optic network or mounted in a separate enclosure, depending on the application and the space available.