Intel Fiber Optics - Transceivers 6

Reset All

Part	Manufacturer	Fiber Optic Type	Mounting Feature	Maximum Supply Voltage	Maximum Operating Temperature	Minimum Operating Temperature	Rx Data Rate	Tx Data Rate	Emitter or Detector Type	Fiber Type	Nominal Optical Power Output	Connection Type	Nominal Supply Voltage	Sub-Category	Nominal Operating Wavelength	Minimum Supply Voltage	Minimum Operating Wavelength	Communication Standard	Maximum Operating Wavelength	Minimum Return Loss	Additional Features	Sensitivity Level
E10GSFPSR903239	Intel	TRANSCEIVER		3.46 V	70 Cel	0 Cel								Fiber Optic Transceivers	850 nm
E10GSFPSR	Intel	TRANSCEIVER	PANEL MOUNT	3.46 V	70 Cel	0 Cel	10300 Mbps	10300 Mbps	LASER	50/125, MMF		LC DUPLEX CONNECTOR			850 nm	3.14 V	840 nm	GBE	860 nm			-11.1 dBm
E25GSFP28SR	Intel	TRANSCEIVER	PANEL MOUNT	3.46 V	70 Cel	0 Cel	10312.5 Mbps	10312.5 Mbps	LASER	50/125, MMF	.5 mW				850 nm	3.15 V	840 nm		860 nm	12 dB		5.6 dBm
E10GSFPLR903240	Intel	TRANSCEIVER		3.46 V	70 Cel	0 Cel								Fiber Optic Transceivers	850 nm
E25GSFP28LRX	Intel	TRANSCEIVER	PANEL MOUNT	3.46 V	85 Cel		25780 Mbps	25780 Mbps	LASER		.56 mW		3.3 V		1310 nm	3.14 V	1295 nm		1325 nm		IT ALSO HAS RECEIVER WAVELENGTH 1260 TO 1355 NM	-12 dBm
E25GSFP28SRX	Intel	TRANSCEIVER	PANEL MOUNT	3.46 V	85 Cel		25780 Mbps	25780 Mbps	VCSEL	MMF	.5 mW		3.3 V		850 nm	3.14 V	840 nm		860 nm			2.4 dBm

Fiber Optics - Transceivers

Fiber optic transceivers are electronic devices that are used in fiber optic communication systems to transmit and receive optical signals. They are designed to both transmit and receive data over a fiber optic network, allowing for two-way communication between devices.

Fiber optic transceivers typically consist of a transmitter, a receiver, and control circuitry. The transmitter converts electrical signals into optical signals, which are then transmitted over the fiber optic cable. The receiver converts the incoming optical signal into an electrical signal, which is then processed by the control circuitry.

Fiber optic transceivers use different technologies to transmit and receive optical signals, including:

1. Direct modulation: Direct modulation uses an LED or laser diode to directly modulate the optical signal in response to an electrical signal.

2. External modulation: External modulation uses an electro-optic modulator to modulate the optical signal in response to an electrical signal.

3. Coherent detection: Coherent detection uses a local oscillator to synchronize the optical signal with a reference signal, enabling precise phase and amplitude measurements of the optical signal.

Fiber optic transceivers come in different configurations and designs, depending on the application and the required performance. They can be integrated into a fiber optic network or mounted in a separate enclosure, depending on the application and the space available.