Microchip Technology Crystal Filters 1

Reset All
Part RoHS Manufacturer Filter Type Construction No. of Functions Mounting Type No. of Terminals I/O Impedance Dimensions Maximum Operating Temperature Attenuation At Maximum Frequency Maximum Attenuation Frequency (± Δf) Minimum Operating Temperature Attenuation At Minimum Frequency Minimum Attenuation Frequency (± Δf) Terminal Finish Height Width (mm) Bandwidth (± Δf) Maximum Insertion Loss Additional Features Center/Cutoff Frequency (fo/fc) JESD-609 Code Length

MQF70.0-1500/03

Microchip Technology

CRYSTAL FILTER

MONOLITHIC

1

THROUGH HOLE MOUNT

50 OHM

L38.4XB18.2XH13 (mm)

70 Cel

90 dB

100 kHz

-20 Cel

60 dB

30 kHz

Tin/Silver (Sn/Ag)

13 mm

7.5 kHz

6 dB

6 POLE

70 MHz

e2

38.4 mm

Crystal Filters

Crystal filters are electronic filters that are used in RF and microwave communication systems to selectively filter out unwanted frequencies from a signal. They are designed to provide a high level of selectivity and precision in filtering, making them ideal for use in applications where accurate frequency response is critical.

Crystal filters use a quartz crystal resonator to selectively filter out specific frequencies from a signal. The quartz crystal is typically cut and polished to resonate at a specific frequency or range of frequencies. When a signal is applied to the crystal, it vibrates at its resonant frequency and filters out all other frequencies.

Crystal filters can be designed as band-pass filters, which allow only a specific range of frequencies to pass through, or as band-stop filters, which block a specific range of frequencies. They can also be designed with multiple crystals, which can increase the level of selectivity and precision in filtering.

Crystal filters are commonly used in a variety of RF and microwave communication systems, including radios, satellite communication systems, and radar systems. They are also used in scientific research applications, such as particle accelerators and radio telescopes.