.0024 ohm Data Line Filters 5

Reset All
Part RoHS Manufacturer Filter Type Construction Maximum DC Resistance Maximum Frequency Material Rated Current Minimum Insulation Resistance Approvals (V) Power Supply (V) No. of Functions Technology Screening Level Output Impedance (ohm) High Pot Packing Method Mounting Type Rated Voltage No. of Terminals Sub-Category Dimensions Case Code Maximum Operating Temperature Attenuation At Maximum Frequency Minimum Attenuation Frequency Package Material Minimum Operating Temperature Attenuation At Minimum Frequency Terminal Finish Inductance Maximum Attenuation Frequency Manufacturer Series Height Width (mm) Diameter (mm) Maximum Insertion Loss Additional Features JESD-609 Code Minimum Frequency Operating Frequency (Hz) Series Length Capacitance

504-6

West Coast Magnetics

DATA LINE FILTER

.0024 ohm

2

TAPE AND REEL

SURFACE MOUNT

4

L30.5XB25.2XH13.2 (mm)/L1.201XB0.992XH0.52 (inch)

110 uH

13.2 mm

30.5 mm

RB6132-25-0M5

Schaffner Holding Ag

DATA LINE FILTER

.0024 ohm

25 A

IEC; UL

3

PANEL MOUNT

1000 V

6

125 Cel

-40 Cel

470 uH

48 mm

57.8

58.8 mm

PA2755NLT

Pulse Electronics

DATA LINE FILTER

.0024 ohm

14 A

2

TR

SURFACE MOUNT

4

L21.1XB19.05XH11.2 (mm)/L0.831XB0.75XH0.441 (inch)

130 Cel

-40 Cel

117 uH

11.2 mm

19.05

0.00195 DC RESISTANCE MAX AVAILABLE

21.1 mm

PA2755NL

Pulse Electronics

DATA LINE FILTER

.0024 ohm

14 A

2

SURFACE MOUNT

4

L21.1XB19.05XH11.2 (mm)/L0.831XB0.75XH0.441 (inch)

130 Cel

-40 Cel

117 uH

11.2 mm

19.05

0.00195 DC RESISTANCE MAX AVAILABLE

21.1 mm

RB6532-25-0M5

Schaffner Holding Ag

DATA LINE FILTER

.0024 ohm

25 A

IEC; UL

3

PANEL MOUNT

1000 V

6

125 Cel

-40 Cel

470 uH

58 mm

55

58 mm

Data Line Filters

Data line filters are electronic filters that are used to filter out noise and interference from data communication lines. They are designed to provide a high level of attenuation of unwanted frequencies while allowing the desired data signal to pass through with minimal distortion.

Data line filters use a combination of passive and active components, including resistors, capacitors, inductors, and op-amps, to filter out noise and interference from data communication lines. They can be designed for a wide range of communication standards, including Ethernet, USB, HDMI, and other data communication protocols.

Data line filters can be designed as low-pass filters, which allow low-frequency signals to pass through while attenuating high-frequency signals, or as band-stop filters, which block a specific range of frequencies while allowing other frequencies to pass through. They can also be designed with multiple stages of filtering to provide increased attenuation of unwanted frequencies.

Data line filters are commonly used in a variety of electronic systems, including computers, telecommunication equipment, medical equipment, and industrial control systems. They are also used in data centers and other applications where high-speed data communication is critical.