Part | RoHS | Manufacturer | Filter Type | Construction | Maximum DC Resistance | Maximum Frequency | Material | Rated Current | Minimum Insulation Resistance | Approvals (V) | Power Supply (V) | No. of Functions | Technology | Screening Level | Output Impedance (ohm) | High Pot | Packing Method | Mounting Type | Rated Voltage | No. of Terminals | Sub-Category | Dimensions | Case Code | Maximum Operating Temperature | Attenuation At Maximum Frequency | Minimum Attenuation Frequency | Package Material | Minimum Operating Temperature | Attenuation At Minimum Frequency | Terminal Finish | Inductance | Maximum Attenuation Frequency | Manufacturer Series | Height | Width (mm) | Diameter (mm) | Maximum Insertion Loss | Additional Features | JESD-609 Code | Minimum Frequency | Operating Frequency (Hz) | Series | Length | Capacitance |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
TDK |
FERRITE CHIP |
.006 ohm |
8 A |
10 Mohm |
2 |
700 OHM |
TAPE AND REEL |
SURFACE MOUNT |
80 V |
4 |
L12.0XB11.0XH6.0 (mm)/L0.472XB0.433XH0.236 (inch) |
85 Cel |
-40 Cel |
6 mm |
11.0 |
12 mm |
|||||||||||||||||||||||||||
|
Wurth Elektronik |
FERRITE CHIP |
Chip Bead |
.006 ohm |
1100 MHz |
Ferrite |
8 A |
1 |
100 OHM |
TR, 13 INCH |
SURFACE MOUNT |
2 |
Other Filters |
L4.5XB3.2XH2.3 (mm)/L0.177XB0.126XH0.091 (inch) |
1812 |
125 Cel |
-55 Cel |
Tin (Sn) - with Nickel (Ni) barrier |
2.3 mm |
3.2 |
e3 |
100 MHz |
4.5 mm |
|||||||||||||||||||||
|
TDK |
DATA LINE FILTER |
.006 ohm |
8 A |
10 Mohm |
2 |
AEC-Q200 |
700 OHM |
TR, 13 INCH |
SURFACE MOUNT |
80 V |
4 |
L12.0XB11.0XH6.0 (mm)/L0.472XB0.433XH0.236 (inch) |
125 Cel |
-40 Cel |
TIN OVER NICKEL |
6 mm |
11.0 |
AEC-Q200 |
e3 |
12 mm |
|||||||||||||||||||||||
|
Wurth Elektronik |
DATA LINE FILTER |
.006 ohm |
8 A |
IEC |
2 |
AEC-Q200 |
700 OHM |
TR, EMBOSSED, 13 INCH |
SURFACE MOUNT |
80 V |
4 |
125 Cel |
-40 Cel |
9 uH |
6 mm |
11 |
12 mm |
||||||||||||||||||||||||||
|
Taiyo Yuden |
FERRITE CHIP |
Chip Bead |
.006 ohm |
100 MHz |
Ferrite |
6 A |
Tape, Paper |
SURFACE MOUNT |
Other Passive Filters |
L1.6XB.8XH.8 (mm)/L.063XB.0315XH.0315 (inch) |
0603 |
125 Cel |
-40 Cel |
.8 mm |
.8 |
100 MHz |
1.6 mm |
||||||||||||||||||||||||||
|
Taiyo Yuden |
FERRITE CHIP |
.006 ohm |
6 A |
1 |
AEC-Q200 |
28 OHM |
Tape, Paper |
SURFACE MOUNT |
2 |
125 Cel |
-40 Cel |
.8 mm |
0.8 |
1.6 mm |
|||||||||||||||||||||||||||||
|
Bourns |
DATA LINE FILTER |
.006 ohm |
16 A |
UL |
2 |
THROUGH HOLE MOUNT |
4 |
L38.1XB20.701XH38.86 (mm)/L1.50XB0.815XH1.53 (inch) |
105 Cel |
-55 Cel |
1200 uH |
38.86 mm |
20.32 |
38.1 mm |
|||||||||||||||||||||||||||||
|
Taiyo Yuden |
FERRITE CHIP |
.006 ohm |
6 A |
1 |
28 OHM |
PAPER, TAPE |
SURFACE MOUNT |
2 |
125 Cel |
-40 Cel |
.8 mm |
0.8 |
1.6 mm |
||||||||||||||||||||||||||||||
Traco Electronic Ag |
DATA LINE FILTER |
.006 ohm |
16 A |
2 |
THROUGH HOLE MOUNT |
500 V |
4 |
105 Cel |
-40 Cel |
285 uH |
15 mm |
16 |
16 mm |
|||||||||||||||||||||||||||||||
|
Taiyo Yuden |
FERRITE CHIP |
.006 ohm |
6 A |
1 |
28 OHM |
TR, PAPER |
SURFACE MOUNT |
2 |
125 Cel |
-40 Cel |
.8 mm |
0.8 |
1.6 mm |
||||||||||||||||||||||||||||||
|
Taiyo Yuden |
FERRITE CHIP |
.006 ohm |
6 A |
1 |
AEC-Q200 |
28 OHM |
TR, PAPER |
SURFACE MOUNT |
2 |
125 Cel |
-40 Cel |
.8 mm |
0.8 |
1.6 mm |
Data line filters are electronic filters that are used to filter out noise and interference from data communication lines. They are designed to provide a high level of attenuation of unwanted frequencies while allowing the desired data signal to pass through with minimal distortion.
Data line filters use a combination of passive and active components, including resistors, capacitors, inductors, and op-amps, to filter out noise and interference from data communication lines. They can be designed for a wide range of communication standards, including Ethernet, USB, HDMI, and other data communication protocols.
Data line filters can be designed as low-pass filters, which allow low-frequency signals to pass through while attenuating high-frequency signals, or as band-stop filters, which block a specific range of frequencies while allowing other frequencies to pass through. They can also be designed with multiple stages of filtering to provide increased attenuation of unwanted frequencies.
Data line filters are commonly used in a variety of electronic systems, including computers, telecommunication equipment, medical equipment, and industrial control systems. They are also used in data centers and other applications where high-speed data communication is critical.