.012 ohm Data Line Filters 6

Reset All
Part RoHS Manufacturer Filter Type Construction Maximum DC Resistance Maximum Frequency Material Rated Current Minimum Insulation Resistance Approvals (V) Power Supply (V) No. of Functions Technology Screening Level Output Impedance (ohm) High Pot Packing Method Mounting Type Rated Voltage No. of Terminals Sub-Category Dimensions Case Code Maximum Operating Temperature Attenuation At Maximum Frequency Minimum Attenuation Frequency Package Material Minimum Operating Temperature Attenuation At Minimum Frequency Terminal Finish Inductance Maximum Attenuation Frequency Manufacturer Series Height Width (mm) Diameter (mm) Maximum Insertion Loss Additional Features JESD-609 Code Minimum Frequency Operating Frequency (Hz) Series Length Capacitance

BLE18PK160SN1D

Murata Manufacturing

FERRITE CHIP

.012 ohm

2.8 A

1

16 OHM

TR, 7 INCH

SURFACE MOUNT

2

125 Cel

-55 Cel

.8 mm

0.8

1.6 mm

CKD510JB1A105ST

TDK

FEED THROUGH CAPACITOR

.012 ohm

2 A

1000 Mohm

1

TAPE AND REEL

SURFACE MOUNT

10 V

3

L2.0XB1.25XH0.85 (mm)/L0.079XB0.049XH0.033 (inch)

Matte Tin (Sn) - with Nickel (Ni) barrier

.85 mm

1.25

e3

2 mm

1000000 uF

SC-15-200

KEMET Corporation

MAINS FILTER

.012 ohm

15 A

2

BOX; TRAY

THROUGH HOLE MOUNT

250 V

4

120 Cel

-25 Cel

2000 uH

28 mm

50

COMMON MODE CHOKE

ACM12V-172-2PL-TL00

TDK

DATA LINE FILTER

.012 ohm

4.8 A

10 Mohm

2

AEC-Q200

1700 OHM

TR, 13 INCH

SURFACE MOUNT

80 V

4

125 Cel

-40 Cel

6 mm

11

12 mm

8119-RC

Bourns

DATA LINE FILTER

.012 ohm

14.5 A

UL

2

THROUGH HOLE MOUNT

4

L43.18XB22.86XH41.91 (mm)/L1.7XB0.9XH1.65 (inch)

105 Cel

-55 Cel

4000 uH

41.91 mm

22.86

43.18 mm

PM3700-30-RC

Bourns

DATA LINE FILTER

.012 ohm

5.5 A

2

TAPE AND REEL

SURFACE MOUNT

4

D17.78XH11.43 (mm)/D0.7XH0.45 (inch)

125 Cel

20 dB

-55 Cel

TIN SILVER COPPER

750 uH

20 MHz

11.43 mm

17.78

TAPE AND REEL

e1

Data Line Filters

Data line filters are electronic filters that are used to filter out noise and interference from data communication lines. They are designed to provide a high level of attenuation of unwanted frequencies while allowing the desired data signal to pass through with minimal distortion.

Data line filters use a combination of passive and active components, including resistors, capacitors, inductors, and op-amps, to filter out noise and interference from data communication lines. They can be designed for a wide range of communication standards, including Ethernet, USB, HDMI, and other data communication protocols.

Data line filters can be designed as low-pass filters, which allow low-frequency signals to pass through while attenuating high-frequency signals, or as band-stop filters, which block a specific range of frequencies while allowing other frequencies to pass through. They can also be designed with multiple stages of filtering to provide increased attenuation of unwanted frequencies.

Data line filters are commonly used in a variety of electronic systems, including computers, telecommunication equipment, medical equipment, and industrial control systems. They are also used in data centers and other applications where high-speed data communication is critical.