.32 ohm Data Line Filters 8

Reset All

Part	Manufacturer	Filter Type	Construction	Maximum DC Resistance	Rated Current	Approvals (V)	No. of Functions	Screening Level	Output Impedance (ohm)	Packing Method	Mounting Type	Rated Voltage	No. of Terminals	Dimensions	Maximum Operating Temperature	Attenuation At Maximum Frequency	Minimum Attenuation Frequency	Minimum Operating Temperature	Attenuation At Minimum Frequency	Terminal Finish	Inductance	Maximum Attenuation Frequency	Height	Width (mm)	Additional Features	JESD-609 Code	Length
744242510	Wurth Elektronik	DATA LINE FILTER		.32 ohm	.3 A	UL	2		2500 OHM	TAPE AND REEL	SURFACE MOUNT	80 V	4	L5.0XB3.3XH3.3 (mm)/L0.197XB0.13XH0.13 (inch)	125 Cel			-40 Cel		TIN SILVER COPPER	51 uH		3.3 mm	3.3		e1	5 mm
SRF0905-500Y	Bourns	DATA LINE FILTER		.32 ohm	.8 A		2		1500 OHM	TAPE AND REEL	SURFACE MOUNT	50 V	4	L9.2XB6.0XH5.0 (mm)/L0.362XB0.236XH0.197 (inch)	105 Cel			-40 Cel		Tin (Sn)	50 uH		5 mm	6.0		e3	9.2 mm
SRF0905A-500Y	Bourns	DATA LINE FILTER		.32 ohm	.8 A		2	AEC-Q200	1500 OHM	TR, 13 Inch	SURFACE MOUNT	80 V	4	L9.2XB6.0XH5.0 (mm)/L0.362XB0.236XH0.197 (inch)	105 Cel			-40 Cel		TIN	50 uH		5 mm	6		e3	9.2 mm
MMZ0603S241HT000	TDK	FERRITE CHIP	Chip Bead	.32 ohm	.42 A		1		240 OHM	TR, 7 INCH	SURFACE MOUNT		2	L0.6XB0.3XH0.3 (mm)/L0.024XB0.012XH0.012 (inch)	125 Cel			-55 Cel					.3 mm	0.3			.6 mm
0805USB-372MLC	Coilcraft	DATA LINE FILTER		.32 ohm	.5 A		2		370 OHM	TAPE AND REEL	SURFACE MOUNT		4	L2.03XB1.27XH1.65 (mm)/L0.08XB0.05XH0.065 (inch)	85 Cel	34.3 dB	100 MHz	-40 Cel	11.9 dB	Gold (Au) - with Nickel (Ni) barrier	.189 uH	500 MHz	1.65 mm	1.27	GOLD OVER NICKEL OVER SILVER-PALLADIUM-GLASS FRIT TERMINATION	e4	2.03 mm
DR221-513AE	Bourns	DATA LINE FILTER		.32 ohm	.2 A	UL	2		1400 OHM	TAPE AND REEL	SURFACE MOUNT	50 V	4	L5.0XB3.3XH3.3 (mm)/L0.197XB0.13XH0.13 (inch)	125 Cel			-40 Cel		TIN OVER NICKEL	50 uH		3.3 mm	3.3		e3	5 mm
0805USB-372MLB	Coilcraft	DATA LINE FILTER		.32 ohm	.5 A		2		370 OHM	TAPE AND REEL	SURFACE MOUNT		4	L2.03XB1.27XH1.65 (mm)/L0.08XB0.05XH0.065 (inch)	85 Cel	34.3 dB	100 MHz	-40 Cel	11.9 dB	Gold (Au) - with Nickel (Ni) barrier	.189 uH	500 MHz	1.65 mm	1.27	GOLD OVER NICKEL OVER SILVER-PALLADIUM-GLASS FRIT TERMINATION	e4	2.03 mm
0805USBF-502MRC	Coilcraft	DATA LINE FILTER		.32 ohm			2	AEC-Q200		TR, Plastic, 7 Inch	SURFACE MOUNT		4		125 Cel			-40 Cel		Matte Tin (Sn) - with Nickel (Ni) barrier	.315 uH		1.4 mm	1.27	AEC-Q200	e3	2.03 mm

Data Line Filters

Data line filters are electronic filters that are used to filter out noise and interference from data communication lines. They are designed to provide a high level of attenuation of unwanted frequencies while allowing the desired data signal to pass through with minimal distortion.

Data line filters use a combination of passive and active components, including resistors, capacitors, inductors, and op-amps, to filter out noise and interference from data communication lines. They can be designed for a wide range of communication standards, including Ethernet, USB, HDMI, and other data communication protocols.

Data line filters can be designed as low-pass filters, which allow low-frequency signals to pass through while attenuating high-frequency signals, or as band-stop filters, which block a specific range of frequencies while allowing other frequencies to pass through. They can also be designed with multiple stages of filtering to provide increased attenuation of unwanted frequencies.

Data line filters are commonly used in a variety of electronic systems, including computers, telecommunication equipment, medical equipment, and industrial control systems. They are also used in data centers and other applications where high-speed data communication is critical.