.49 ohm Data Line Filters 6

Reset All
Part RoHS Manufacturer Filter Type Construction Maximum DC Resistance Maximum Frequency Material Rated Current Minimum Insulation Resistance Approvals (V) Power Supply (V) No. of Functions Technology Screening Level Output Impedance (ohm) High Pot Packing Method Mounting Type Rated Voltage No. of Terminals Sub-Category Dimensions Case Code Maximum Operating Temperature Attenuation At Maximum Frequency Minimum Attenuation Frequency Package Material Minimum Operating Temperature Attenuation At Minimum Frequency Terminal Finish Inductance Maximum Attenuation Frequency Manufacturer Series Height Width (mm) Diameter (mm) Maximum Insertion Loss Additional Features JESD-609 Code Minimum Frequency Operating Frequency (Hz) Series Length Capacitance

BLM15AX102SN1D

Murata Manufacturing

FERRITE CHIP

Chip Bead

.49 ohm

100 MHz

Ferrite

.35 A

1

1000 OHM

TR, PAPER, 7 INCH

SURFACE MOUNT

2

Other Filters

L1.0XB0.5XH0.5 (mm)/L0.039XB0.02XH0.02 (inch)

0402

125 Cel

-55 Cel

TIN OVER NICKEL

.5 mm

0.5

e3

100 MHz

1 mm

DLW21HN670HQ2L

Murata Manufacturing

DATA LINE FILTER

.49 ohm

.24 A

10 Mohm

2

67 OHM

TR, EMBOSSED, 7 INCH

SURFACE MOUNT

20 V

4

L2.0XB1.2XH0.9 (mm)/L0.079XB0.047XH0.035 (inch)

85 Cel

-40 Cel

.9 mm

1.2

2 mm

BLM15AX102SN1J

Murata Manufacturing

FERRITE CHIP

Chip Bead

.49 ohm

100 MHz

Ferrite

.35 A

1

1000 OHM

TAPE

SURFACE MOUNT

2

Other Filters

L1.0XB0.5XH0.5 (mm)/L0.039XB0.02XH0.02 (inch)

0402

125 Cel

-55 Cel

TIN

.5 mm

0.5

e3

100 MHz

1 mm

MMZ1005S102HT000

TDK

FERRITE CHIP

Chip Bead

.49 ohm

.36 A

1

1000 OHM

TR, 7 INCH

SURFACE MOUNT

2

L1.0XB0.5XH0.5 (mm)/L0.039XB0.02XH0.02 (inch)

125 Cel

-55 Cel

.5 mm

0.5

1 mm

MMZ1005S102HTD25

TDK

FERRITE CHIP

Chip Bead

.49 ohm

.36 A

1

AEC-Q200

1000 OHM

TR, 7 INCH

SURFACE MOUNT

2

125 Cel

-55 Cel

.5 mm

0.5

1 mm

LPD5030V-103MRB

Coilcraft

DATA LINE FILTER

.49 ohm

UL

2

11690 OHM

TR

SURFACE MOUNT

4

85 Cel

-40 Cel

MATTE TIN OVER NICKEL

10 uH

2.9 mm

4.8

4.8 mm

Data Line Filters

Data line filters are electronic filters that are used to filter out noise and interference from data communication lines. They are designed to provide a high level of attenuation of unwanted frequencies while allowing the desired data signal to pass through with minimal distortion.

Data line filters use a combination of passive and active components, including resistors, capacitors, inductors, and op-amps, to filter out noise and interference from data communication lines. They can be designed for a wide range of communication standards, including Ethernet, USB, HDMI, and other data communication protocols.

Data line filters can be designed as low-pass filters, which allow low-frequency signals to pass through while attenuating high-frequency signals, or as band-stop filters, which block a specific range of frequencies while allowing other frequencies to pass through. They can also be designed with multiple stages of filtering to provide increased attenuation of unwanted frequencies.

Data line filters are commonly used in a variety of electronic systems, including computers, telecommunication equipment, medical equipment, and industrial control systems. They are also used in data centers and other applications where high-speed data communication is critical.