.8 ohm Data Line Filters 54

Reset All
Part RoHS Manufacturer Filter Type Construction Maximum DC Resistance Maximum Frequency Material Rated Current Minimum Insulation Resistance Approvals (V) Power Supply (V) No. of Functions Technology Screening Level Output Impedance (ohm) High Pot Packing Method Mounting Type Rated Voltage No. of Terminals Sub-Category Dimensions Case Code Maximum Operating Temperature Attenuation At Maximum Frequency Minimum Attenuation Frequency Package Material Minimum Operating Temperature Attenuation At Minimum Frequency Terminal Finish Inductance Maximum Attenuation Frequency Manufacturer Series Height Width (mm) Diameter (mm) Maximum Insertion Loss Additional Features JESD-609 Code Minimum Frequency Operating Frequency (Hz) Series Length Capacitance

ACML-0805-202-T

Abracon

FERRITE CHIP

.8 ohm

.2 A

1

2000 OHM

TAPE AND REEL

SURFACE MOUNT

2

L2.0XB1.25XH0.85 (mm)/L0.079XB0.049XH0.033 (inch)

125 Cel

-55 Cel

MATTE TIN OVER NICKEL

.85 mm

1.25

e3

2 mm

AEMIF-0805-401M-16-T

Abracon

DATA LINE FILTER

.8 ohm

.3 A

200 Mohm

1

TR, 7 INCH

SURFACE MOUNT

16 V

2

85 Cel

-40 Cel

20 dB

.96 mm

1.2

2 mm

M2022-ALC

Coilcraft

DATA LINE FILTER

.8 ohm

.5 A

2

TAPE AND REEL

SURFACE MOUNT

4

L4.95XB3.81XH3.43 (mm)/L0.195XB0.15XH0.135 (inch)

85 Cel

-40 Cel

Gold (Au) - with Nickel (Ni) barrier

4.2 uH

3.43 mm

3.81

NICKEL/GOLD OVER MOLY-MANGANESE

e4

4.95 mm

NFZ15SG152SN10D

Murata Manufacturing

FERRITE CHIP

.8 ohm

.4 A

1

1500 OHM

TR, PAPER, 7 INCH

SURFACE MOUNT

2

85 Cel

-40 Cel

.5 mm

0.5

IMPEDANCE AT 900 MHZ

1 mm

SRF3216A-601Y

Bourns

DATA LINE FILTER

.8 ohm

10 Mohm

2

AEC-Q200

600 OHM

TR, 7 INCH

SURFACE MOUNT

100 V

4

L3.2XB1.6XH2.0 (mm)/L0.126XB0.063XH0.079 (inch)

125 Cel

-55 Cel

TIN OVER NICKEL

2 mm

1.6

e3

3.2 mm

EMIF02-SPK02F2

STMicroelectronics

DATA LINE FILTER

.8 ohm

IEC

2

TR

SURFACE MOUNT

Data Line Filters

L1.26XB0.89XH0.65 (mm)/L0.05XB0.035XH0.026 (inch)

125 Cel

PLASTIC

-30 Cel

.65 mm

0.89

1.26 mm

250 uF

Data Line Filters

Data line filters are electronic filters that are used to filter out noise and interference from data communication lines. They are designed to provide a high level of attenuation of unwanted frequencies while allowing the desired data signal to pass through with minimal distortion.

Data line filters use a combination of passive and active components, including resistors, capacitors, inductors, and op-amps, to filter out noise and interference from data communication lines. They can be designed for a wide range of communication standards, including Ethernet, USB, HDMI, and other data communication protocols.

Data line filters can be designed as low-pass filters, which allow low-frequency signals to pass through while attenuating high-frequency signals, or as band-stop filters, which block a specific range of frequencies while allowing other frequencies to pass through. They can also be designed with multiple stages of filtering to provide increased attenuation of unwanted frequencies.

Data line filters are commonly used in a variety of electronic systems, including computers, telecommunication equipment, medical equipment, and industrial control systems. They are also used in data centers and other applications where high-speed data communication is critical.