10 A Data Line Filters 105

Reset All

Part	Manufacturer	Filter Type	Maximum DC Resistance	Rated Current	Minimum Insulation Resistance	Approvals (V)	No. of Functions	Screening Level	Output Impedance (ohm)	Packing Method	Mounting Type	Rated Voltage	No. of Terminals	Dimensions	Maximum Operating Temperature	Attenuation At Maximum Frequency	Minimum Operating Temperature	Terminal Finish	Inductance	Maximum Attenuation Frequency	Manufacturer Series	Height	Width (mm)	Diameter (mm)	Maximum Insertion Loss	Additional Features	JESD-609 Code	Length	Capacitance
YFF31HC1H153MT000N	TDK	FEED THROUGH CAPACITOR		10 A			1			TR	SURFACE MOUNT	50 V	4	L3.2XB1.6XH1.3 (mm)/L0.126XB0.063XH0.051 (inch)	125 Cel		-55 Cel	TIN OVER NICKEL				1.3 mm	1.6		40 dB		e3	3.2 mm	15000 uF
NFM31KC103R1H3L	Murata Manufacturing	FEED THROUGH CAPACITOR		10 A	1000 Mohm		1			TAPE AND REEL	SURFACE MOUNT	50 V	3	L3.2XB1.6XH1.3 (mm)/L0.126XB0.063XH0.051 (inch)	125 Cel		-55 Cel	TIN OVER NICKEL				1.3 mm	1.6				e3	3.2 mm	10000 uF
BNP002-02	Murata Manufacturing	DATA LINE FILTER	.05 ohm	10 A	1000 Mohm		2				THROUGH HOLE MOUNT	50 V		L12XB11XH12 (mm)	100 Cel	40 dB	-40 Cel			20 MHz	BNP	12 mm			40 dB	PI-TYPE CIRCUIT		12 mm
SC-10-E200H	KEMET Corporation	MAINS FILTER	.02 ohm	10 A			2			BOX; TRAY	THROUGH HOLE MOUNT	250 V	4		120 Cel		-25 Cel		2000 uH			24 mm		34		COMMON MODE CHOKE
NFM31KC223R2A3L	Murata Manufacturing	FEED THROUGH CAPACITOR		10 A	1000 Mohm		1			TAPE AND REEL	SURFACE MOUNT	100 V	3	L3.2XB1.6XH1.3 (mm)/L0.126XB0.063XH0.051 (inch)	105 Cel		-55 Cel	TIN OVER NICKEL				1.3 mm	1.6				e3	3.2 mm	22000 uF
7124-RC	Bourns	DATA LINE FILTER	.02 ohm	10 A		UL	2				THROUGH HOLE MOUNT		4	L30.48XB20.32XH30.48 (mm)/L1.2XB0.8XH1.2 (inch)	105 Cel		-55 Cel		2550 uH			30.48 mm	20.32					30.48 mm
AB4X2X4.5W	Toshiba	FERRITE BEAD		10 A			1			BOX	SURFACE MOUNT	15 V										6 mm		5
BLE32PN300SH1L	Murata Manufacturing	FERRITE CHIP	1.6 ohm	10 A			1	AEC-Q200	30 OHM	TR, PLASTIC, 7 INCH	SURFACE MOUNT		2	L3.2XB2.5XH2.0 (mm)/L0.126XB0.098XH0.079 (inch)	125 Cel		-55 Cel					2 mm	2.5			AEC-Q200		3.2 mm
BLM31SN500SZ1B	Murata Manufacturing	FERRITE CHIP	.0016 ohm	10 A			1	AEC-Q200	50 OHM	BAG; BULK	SURFACE MOUNT		2		125 Cel		-55 Cel					1.1 mm	1.6					3.2 mm

Data Line Filters

Data line filters are electronic filters that are used to filter out noise and interference from data communication lines. They are designed to provide a high level of attenuation of unwanted frequencies while allowing the desired data signal to pass through with minimal distortion.

Data line filters use a combination of passive and active components, including resistors, capacitors, inductors, and op-amps, to filter out noise and interference from data communication lines. They can be designed for a wide range of communication standards, including Ethernet, USB, HDMI, and other data communication protocols.

Data line filters can be designed as low-pass filters, which allow low-frequency signals to pass through while attenuating high-frequency signals, or as band-stop filters, which block a specific range of frequencies while allowing other frequencies to pass through. They can also be designed with multiple stages of filtering to provide increased attenuation of unwanted frequencies.

Data line filters are commonly used in a variety of electronic systems, including computers, telecommunication equipment, medical equipment, and industrial control systems. They are also used in data centers and other applications where high-speed data communication is critical.