2.7 A Data Line Filters 8

Reset All
Part RoHS Manufacturer Filter Type Construction Maximum DC Resistance Maximum Frequency Material Rated Current Minimum Insulation Resistance Approvals (V) Power Supply (V) No. of Functions Technology Screening Level Output Impedance (ohm) High Pot Packing Method Mounting Type Rated Voltage No. of Terminals Sub-Category Dimensions Case Code Maximum Operating Temperature Attenuation At Maximum Frequency Minimum Attenuation Frequency Package Material Minimum Operating Temperature Attenuation At Minimum Frequency Terminal Finish Inductance Maximum Attenuation Frequency Manufacturer Series Height Width (mm) Diameter (mm) Maximum Insertion Loss Additional Features JESD-609 Code Minimum Frequency Operating Frequency (Hz) Series Length Capacitance

BKP1608HS121-T

Taiyo Yuden

FERRITE CHIP

Multilayer Chip

.035 ohm

100 MHz

Ferrite

2.7 A

1

120 OHM

TAPE AND REEL

SURFACE MOUNT

2

Other Passive Filters

L1.6XB0.8XH0.8 (mm)/L0.063XB0.031XH0.031 (inch)

0603

85 Cel

-55 Cel

TIN OVER NICKEL

.8 mm

0.8

e3

100 MHz

1.6 mm

BKP1608HS121-TV

Taiyo Yuden

FERRITE CHIP

.035 ohm

2.7 A

1

100 OHM

TAPE

SURFACE MOUNT

2

L1.6XB0.8XH0.8 (mm)/L0.063XB0.031XH0.031 (inch)

85 Cel

-55 Cel

.8 mm

0.8

1.6 mm

BLM31KN471SZ1L

Murata Manufacturing

FERRITE CHIP

.02 ohm

2.7 A

1

AEC-Q200

470 OHM

TR, EMBOSSED, 7 INCH

SURFACE MOUNT

2

125 Cel

-55 Cel

TIN

1.6 mm

1.6

e3

3.2 mm

BLM31KN471SN1L

Murata Manufacturing

FERRITE CHIP

.02 ohm

2.7 A

1

470 OHM

TR, EMBOSSED, 7 INCH

SURFACE MOUNT

2

L3.2XB1.6XH1.6 (mm)/L0.126XB0.063XH0.063 (inch)

125 Cel

-55 Cel

TIN

1.6 mm

1.6

e3

3.2 mm

744207

Wurth Elektronik

DATA LINE FILTER

.035 ohm

2.7 A

UL

2

1100 OHM

SURFACE MOUNT

8

L10.5XB9.5XH5.75 (mm)/L0.413XB0.374XH0.226 (inch)

125 Cel

-40 Cel

35 uH

5.75 mm

9.5

10.5 mm

SRF1306-350Y

Bourns

DATA LINE FILTER

.035 ohm

2.7 A

2

400 OHM

TAPE AND REEL

SURFACE MOUNT

50 V

8

L10.5XB9.5XH5.75 (mm)/L0.413XB0.374XH0.226 (inch)

105 Cel

-40 Cel

TIN

35 uH

5.75 mm

9.5

e3

10.5 mm

LSMGA201208T800RG

Taiyo Yuden

FERRITE CHIP

.025 ohm

2.7 A

1

80 OHM

TR, PAPER

SURFACE MOUNT

2

125 Cel

-40 Cel

.85 mm

1.25

2 mm

BLM31KN471SH1L

Murata Manufacturing

FERRITE CHIP

.02 ohm

2.7 A

1

AEC-Q200

470 OHM

TR, EMBOSSED, 7 INCH

SURFACE MOUNT

2

125 Cel

-55 Cel

TIN

1.6 mm

1.6

e3

3.2 mm

Data Line Filters

Data line filters are electronic filters that are used to filter out noise and interference from data communication lines. They are designed to provide a high level of attenuation of unwanted frequencies while allowing the desired data signal to pass through with minimal distortion.

Data line filters use a combination of passive and active components, including resistors, capacitors, inductors, and op-amps, to filter out noise and interference from data communication lines. They can be designed for a wide range of communication standards, including Ethernet, USB, HDMI, and other data communication protocols.

Data line filters can be designed as low-pass filters, which allow low-frequency signals to pass through while attenuating high-frequency signals, or as band-stop filters, which block a specific range of frequencies while allowing other frequencies to pass through. They can also be designed with multiple stages of filtering to provide increased attenuation of unwanted frequencies.

Data line filters are commonly used in a variety of electronic systems, including computers, telecommunication equipment, medical equipment, and industrial control systems. They are also used in data centers and other applications where high-speed data communication is critical.