8.5 A Data Line Filters 7

Reset All
Part RoHS Manufacturer Filter Type Construction Maximum DC Resistance Maximum Frequency Material Rated Current Minimum Insulation Resistance Approvals (V) Power Supply (V) No. of Functions Technology Screening Level Output Impedance (ohm) High Pot Packing Method Mounting Type Rated Voltage No. of Terminals Sub-Category Dimensions Case Code Maximum Operating Temperature Attenuation At Maximum Frequency Minimum Attenuation Frequency Package Material Minimum Operating Temperature Attenuation At Minimum Frequency Terminal Finish Inductance Maximum Attenuation Frequency Manufacturer Series Height Width (mm) Diameter (mm) Maximum Insertion Loss Additional Features JESD-609 Code Minimum Frequency Operating Frequency (Hz) Series Length Capacitance

7448229004

Wurth Elektronik

DATA LINE FILTER

.0055 ohm

8.5 A

UL

2

THROUGH HOLE MOUNT

250 V

L18.5XB14.5XH22.0 (mm)/L0.728XB0.571XH0.866 (inch)

125 Cel

-40 Cel

350 uH

22 mm

14.5

18.5 mm

BDS3/3/4.6-4S2-Z

Ferroxcube International Holding B V

FERRITE BEAD

.0006 ohm

8.5 A

1

50 OHM

TAPE AND REEL

SURFACE MOUNT

60 V

2

L4.6XB3.05XH3.0 (mm)/L0.181XB0.12XH0.118 (inch)

TIN

3 mm

3.05

e3

4.6 mm

BDS3/3/4.6-4S2

Ferroxcube International Holding B V

FERRITE BEAD

.0006 ohm

8.5 A

1

50 OHM

TAPE AND REEL

SURFACE MOUNT

60 V

2

L4.6XB3.05XH3 (mm)

3 mm

3.05

4.6 mm

BLM21SN300SN1D

Murata Manufacturing

FERRITE CHIP

.004 ohm

8.5 A

1

30 OHM

TR, PAPER, 7 INCH

SURFACE MOUNT

2

L2.0XB1.25XH0.85 (mm)/L0.079XB0.049XH0.033 (inch)

125 Cel

-55 Cel

TIN

.85 mm

1.25

e3

2 mm

BLM21SN300SZ1D

Murata Manufacturing

FERRITE CHIP

.004 ohm

8.5 A

1

AEC-Q200

30 OHM

TR, 7 INCH

SURFACE MOUNT

2

L2.0XB1.25XH0.85 (mm)/L0.079XB0.049XH0.033 (inch)

125 Cel

-55 Cel

TIN

.85 mm

1.25

AEC-Q200

e3

2 mm

BDS3/3/4.6-3S1-CZ

Ferroxcube International Holding B V

FERRITE BEAD

.0006 ohm

8.5 A

IEC

1

35 OHM

TR, BLISTER, 13 INCH

SURFACE MOUNT

60 V

2

L4.6XB3.05XH3.0 (mm)/L0.181XB0.12XH0.118 (inch)

3 mm

3.05

IMPEDANCE AT 25 MHZ

4.6 mm

BDS3/3/8.9-3S1

Ferroxcube International Holding B V

FERRITE BEAD

.001 ohm

8.5 A

1

80 OHM

TAPE AND REEL

SURFACE MOUNT

60 V

2

L8.9XB3.05XH3 (mm)

3 mm

3.05

IMPEDANCE AT 10 MHZ

8.9 mm

Data Line Filters

Data line filters are electronic filters that are used to filter out noise and interference from data communication lines. They are designed to provide a high level of attenuation of unwanted frequencies while allowing the desired data signal to pass through with minimal distortion.

Data line filters use a combination of passive and active components, including resistors, capacitors, inductors, and op-amps, to filter out noise and interference from data communication lines. They can be designed for a wide range of communication standards, including Ethernet, USB, HDMI, and other data communication protocols.

Data line filters can be designed as low-pass filters, which allow low-frequency signals to pass through while attenuating high-frequency signals, or as band-stop filters, which block a specific range of frequencies while allowing other frequencies to pass through. They can also be designed with multiple stages of filtering to provide increased attenuation of unwanted frequencies.

Data line filters are commonly used in a variety of electronic systems, including computers, telecommunication equipment, medical equipment, and industrial control systems. They are also used in data centers and other applications where high-speed data communication is critical.