STMicroelectronics Data Line Filters 148

Reset All
Part RoHS Manufacturer Filter Type Construction Maximum DC Resistance Maximum Frequency Material Rated Current Minimum Insulation Resistance Approvals (V) Power Supply (V) No. of Functions Technology Screening Level Output Impedance (ohm) High Pot Packing Method Mounting Type Rated Voltage No. of Terminals Sub-Category Dimensions Case Code Maximum Operating Temperature Attenuation At Maximum Frequency Minimum Attenuation Frequency Package Material Minimum Operating Temperature Attenuation At Minimum Frequency Terminal Finish Inductance Maximum Attenuation Frequency Manufacturer Series Height Width (mm) Diameter (mm) Maximum Insertion Loss Additional Features JESD-609 Code Minimum Frequency Operating Frequency (Hz) Series Length Capacitance

ECMF04-4AMX12

STMicroelectronics

DATA LINE FILTER

2.5 ohm

UL; IEC

4

TAPE AND REEL

SURFACE MOUNT

12

L3.35XB1.55XH0.6 (mm)/L0.132XB0.061XH0.024 (inch)

85 Cel

-40 Cel

.6 mm

1.55

3.35 mm

EMIF04-1502M8

STMicroelectronics

DATA LINE FILTER

187 ohm

UL; IEC

4

TAPE AND REEL

SURFACE MOUNT

10 V

8

Data Line Filters

L1.7XB1.5XH0.6 (mm)/L0.067XB0.059XH0.024 (inch)

85 Cel

PLASTIC

-40 Cel

.6 mm

1.5

1.7 mm

16.5 uF

EMIF02-SPK02F2

STMicroelectronics

DATA LINE FILTER

.8 ohm

IEC

2

TR

SURFACE MOUNT

Data Line Filters

L1.26XB0.89XH0.65 (mm)/L0.05XB0.035XH0.026 (inch)

125 Cel

PLASTIC

-30 Cel

.65 mm

0.89

1.26 mm

250 uF

ECMF4-40A100N10

STMicroelectronics

DATA LINE FILTER

IEC

4

50 OHM

TR

SURFACE MOUNT

10

125 Cel

-55 Cel

.5 mm

1.4

2.25 mm

.25 uF

Data Line Filters

Data line filters are electronic filters that are used to filter out noise and interference from data communication lines. They are designed to provide a high level of attenuation of unwanted frequencies while allowing the desired data signal to pass through with minimal distortion.

Data line filters use a combination of passive and active components, including resistors, capacitors, inductors, and op-amps, to filter out noise and interference from data communication lines. They can be designed for a wide range of communication standards, including Ethernet, USB, HDMI, and other data communication protocols.

Data line filters can be designed as low-pass filters, which allow low-frequency signals to pass through while attenuating high-frequency signals, or as band-stop filters, which block a specific range of frequencies while allowing other frequencies to pass through. They can also be designed with multiple stages of filtering to provide increased attenuation of unwanted frequencies.

Data line filters are commonly used in a variety of electronic systems, including computers, telecommunication equipment, medical equipment, and industrial control systems. They are also used in data centers and other applications where high-speed data communication is critical.