Taiyo Yuden Data Line Filters 347

Reset All

Part	Manufacturer	Filter Type	Maximum DC Resistance	Rated Current	Minimum Insulation Resistance	No. of Functions	Output Impedance (ohm)	Packing Method	Mounting Type	Rated Voltage	No. of Terminals	Dimensions	Maximum Operating Temperature	Minimum Operating Temperature	Terminal Finish	Inductance	Height	Width (mm)	Additional Features	JESD-609 Code	Length
LSMCA160808T180NGR	Taiyo Yuden	FERRITE CHIP	.004 ohm	7.5 A		1	18 OHM	TR, PAPER	SURFACE MOUNT		2		125 Cel	-40 Cel			.8 mm	0.8			1.6 mm
LSMCA201208T330RG	Taiyo Yuden	FERRITE CHIP	.008 ohm	4 A		1	33 OHM	TR, PAPER	SURFACE MOUNT		2		125 Cel	-40 Cel			.85 mm	1.25			2 mm
LSMCA451611T900RG	Taiyo Yuden	FERRITE CHIP	.014 ohm	4 A		1	90 OHM	TR, EMBOSSED	SURFACE MOUNT		2		125 Cel	-40 Cel			1.1 mm	1.6			4.5 mm
LSMCC201208T250NG	Taiyo Yuden	FERRITE CHIP	.004 ohm	6 A		1	25 OHM	TR, PAPER	SURFACE MOUNT		2		125 Cel	-40 Cel			.85 mm	1.25			2 mm
LSMCC321611T480NG	Taiyo Yuden	FERRITE CHIP	.005 ohm	6 A		1	48 OHM	TR, EMBOSSED	SURFACE MOUNT		2		125 Cel	-40 Cel			1.1 mm	1.6			3.2 mm
LSMCC451611T720NG	Taiyo Yuden	FERRITE CHIP	.007 ohm	6 A		1	72 OHM	TR, EMBOSSED	SURFACE MOUNT		2		125 Cel	-40 Cel	MATTE TIN OVER NICKEL		1.1 mm	1.6		e3	4.5 mm
LSMGA201208T800RG	Taiyo Yuden	FERRITE CHIP	.025 ohm	2.7 A		1	80 OHM	TR, PAPER	SURFACE MOUNT		2		125 Cel	-40 Cel			.85 mm	1.25			2 mm
LSMGA322525T202NG	Taiyo Yuden	FERRITE CHIP	.13 ohm	1.2 A		1	2000 OHM	TR, EMBOSSED	SURFACE MOUNT		2		125 Cel	-40 Cel			2.5 mm	2.5			3.2 mm
MCF06052E900-T	Taiyo Yuden	DATA LINE FILTER	6.5 ohm	.05 A	100 Mohm	1	90 OHM	TAPE	SURFACE MOUNT		4	L0.65XB0.5XH0.3 (mm)/L0.026XB0.02XH0.012 (inch)					.3 mm	0.5			.65 mm
MCF08062G120-T	Taiyo Yuden	DATA LINE FILTER	2.5 ohm	.13 A	100 Mohm	1	12 OHM	TAPE	SURFACE MOUNT		4	L0.85XB0.65XH0.4 (mm)/L0.033XB0.026XH0.016 (inch)					.4 mm	0.65			.85 mm
TLF9UBH302W	Taiyo Yuden	DATA LINE FILTER	1.5 ohm	.4 A	100 Mohm	2	20000 OHM	BOX	THROUGH HOLE MOUNT	50 V	4	L17.0XB15.0XH12.0 (mm)/L0.669XB0.591XH0.472 (inch)	105 Cel	-25 Cel		3000 uH	12 mm	15.0	IMPEDANCE AT 1 MHZ		17 mm

Data Line Filters

Data line filters are electronic filters that are used to filter out noise and interference from data communication lines. They are designed to provide a high level of attenuation of unwanted frequencies while allowing the desired data signal to pass through with minimal distortion.

Data line filters use a combination of passive and active components, including resistors, capacitors, inductors, and op-amps, to filter out noise and interference from data communication lines. They can be designed for a wide range of communication standards, including Ethernet, USB, HDMI, and other data communication protocols.

Data line filters can be designed as low-pass filters, which allow low-frequency signals to pass through while attenuating high-frequency signals, or as band-stop filters, which block a specific range of frequencies while allowing other frequencies to pass through. They can also be designed with multiple stages of filtering to provide increased attenuation of unwanted frequencies.

Data line filters are commonly used in a variety of electronic systems, including computers, telecommunication equipment, medical equipment, and industrial control systems. They are also used in data centers and other applications where high-speed data communication is critical.