.3 A EMI Mains Filters 15

Reset All

Part	Manufacturer	Filter Type	Rated Current	Minimum Insulation Resistance	Approvals (V)	High Pot	Packing Method	Mounting Type	Rated Voltage	Dimensions	Maximum Operating Temperature	Minimum Operating Temperature	Terminal Finish	Height	Width (mm)	Additional Features	JESD-609 Code	Operating Frequency (Hz)	Length
SS11VL-R03820	KEMET Corporation	SINGLE PHASE EMI FILTER	.3 A				TRAY	THROUGH HOLE MOUNT	250 V	L22.0XB14.5XH19.5 (mm)/L0.866XB0.571XH0.768 (inch)	120 Cel	-25 Cel		19.5 mm	14.5				22 mm
PLA10AN3630R3D2B	Murata Manufacturing	SINGLE PHASE EMI FILTER	.3 A	100 Mohm			BOX	THROUGH HOLE MOUNT	300 V	L18.0XB16.0XH17.5 (mm)/L0.709XB0.63XH0.689 (inch)	120 Cel	-25 Cel	Tin/Copper (Sn/Cu)	17.5 mm	16.0	INDUCTANCE 36 MILLI HENRY; SECTIONAL WINDING TYPE	e2		18 mm
RN102-0.3-02-12M	Schaffner Holding Ag	SINGLE PHASE EMI FILTER	.3 A		UL; IEC; VDE; ENEC-10			THROUGH HOLE MOUNT	300 V	L14.0XB14.0XH9.0 (mm)/L0.551XB0.551XH0.354 (inch)	100 Cel	-40 Cel		9 mm	14.0			50/60Hz	14 mm
B82722J2302N001	TDK	SINGLE PHASE EMI FILTER	.3 A		UL; EN; IEC; VDE		TRAY	THROUGH HOLE MOUNT	250 V				TIN	25.4 mm	16.1		e3	50/60Hz	23.3 mm
SSRH7HS-M03925	KEMET Corporation	SINGLE PHASE EMI FILTER	.3 A	100 Mohm	UL		TRAY	THROUGH HOLE MOUNT	250 V		120 Cel	-25 Cel		12 mm	14.5				18 mm
RN202-0.3-02-12M	Schaffner Holding Ag	SINGLE PHASE EMI FILTER	.3 A		UL; IEC; VDE; ENEC-10			THROUGH HOLE MOUNT	300 V	L18.2XB8.8XH13.5 (mm)/L0.717XB0.346XH0.531 (inch)	100 Cel	-40 Cel		13.5 mm	8.8			50/60Hz	18.2 mm
EMC-03	Cui	SINGLE PHASE EMI FILTER	.3 A		UL; EN; IEC			THROUGH HOLE MOUNT	305 V		85 Cel	-40 Cel		18 mm	22.2				33.7 mm
RN214-0.3-02-47M	Schaffner Holding Ag	SINGLE PHASE EMI FILTER	.3 A		UL; IEC; VDE; ENEC-10			THROUGH HOLE MOUNT	300 V	L23.0XB15.5XH25.0 (mm)/L0.906XB0.61XH0.984 (inch)	100 Cel	-40 Cel		25 mm	15.5			50/60Hz	23 mm
RN114-0.3-02-47M	Schaffner Holding Ag	SINGLE PHASE EMI FILTER	.3 A		UL; IEC; VDE; ENEC-10			THROUGH HOLE MOUNT	300 V	L22.5XB21.5XH13.2 (mm)/L0.886XB0.846XH0.52 (inch)	100 Cel	-40 Cel		13.2 mm	21.5			50/60Hz	22.5 mm
RN202-0.3-02	Schaffner Holding Ag	SINGLE PHASE EMI FILTER	.3 A		UL; VDE			THROUGH HOLE MOUNT	250 V		125 Cel	-40 Cel		13.5 mm	8.8			50/60Hz	18.2 mm
B82722A2301N001	TDK	SINGLE PHASE EMI FILTER	.3 A		UL; EN; IEC; VDE		TRAY	THROUGH HOLE MOUNT	250 V				TIN OVER NICKEL	13.3 mm	22.3		e3	50/60Hz	22.7 mm
B82722J2301N001	TDK	SINGLE PHASE EMI FILTER	.3 A		UL; EN; IEC; VDE		TRAY	THROUGH HOLE MOUNT	250 V				TIN	25.4 mm	16.1		e3	50/60Hz	23.3 mm
PLA10AN4330R3R2B	Murata Manufacturing	SINGLE PHASE EMI FILTER	.3 A	100 Mohm			BOX	THROUGH HOLE MOUNT	300 V	L18.0XB16.0XH17.5 (mm)/L0.709XB0.63XH0.689 (inch)	120 Cel	-25 Cel	Tin/Copper (Sn/Cu)	17.5 mm	16.0	INDUCTANCE 43 MILLI HENRY; STANDARD WINDING TYPE	e2		18 mm
SSR21NH-031810	KEMET Corporation	SINGLE PHASE EMI FILTER	.3 A	100 Mohm	UL	500 V	TRAY	THROUGH HOLE MOUNT	250 V	L23.0XB23.0XH14.5 (mm)/L0.906XB0.906XH0.571 (inch)	120 Cel	-25 Cel		14.5 mm	23				23 mm
SU9VF-03060	KEMET Corporation	SINGLE PHASE FILTER	.3 A				TRAY	THROUGH HOLE MOUNT	250 V		120 Cel	-25 Cel		17 mm	11				17 mm

EMI Mains Filters

EMI mains filters are electronic filters that are used to suppress electromagnetic interference (EMI) from mains power lines. They are designed to provide a high level of attenuation of unwanted frequencies while allowing the desired power signal to pass through with minimal distortion.

EMI mains filters use a combination of passive and active components, including capacitors, inductors, resistors, and diodes, to filter out noise and interference from power lines. They can be designed for a wide range of power ratings and frequencies, depending on the application.

EMI mains filters can be designed as low-pass filters, which allow low-frequency power signals to pass through while attenuating high-frequency EMI signals, or as band-stop filters, which block a specific range of frequencies while allowing other frequencies to pass through. They can also be designed with multiple stages of filtering to provide increased attenuation of unwanted frequencies.

EMI mains filters are commonly used in a variety of electronic systems, including power supplies, motor drives, medical equipment, and industrial control systems. They are also used in residential and commercial buildings to suppress EMI noise from power lines and prevent interference with other electronic devices.