.5 A EMI Mains Filters 12

Reset All

Part	Manufacturer	Filter Type	Rated Current	Minimum Insulation Resistance	Approvals (V)	High Pot	Maximum Leakage Current	Packing Method	Mounting Type	Rated Voltage	No. of Terminals	Dimensions	Maximum Operating Temperature	Minimum Operating Temperature	Height	Width (mm)	Additional Features	Operating Frequency (Hz)	Length
SU9V-R05034	KEMET Corporation	MAINS FILTER	.5 A	100 Mohm	UL			TRAY	THROUGH HOLE MOUNT	250 V			120 Cel	-25 Cel	17 mm	11			17 mm
FN406-0.5-02	Schaffner Holding Ag	SINGLE PHASE EMI FILTER	.5 A		UL; CSA; ENEC-14	2000 V	.373 mA		THROUGH HOLE MOUNT	250 V		L45.0XB15.0XH28.0 (mm)/L1.772XB0.591XH1.102 (inch)	100 Cel	-25 Cel	28 mm	15.0	INDUCTANCE 24 MILLIHENRY	50/60Hz	45 mm
RN112-0.5-02-27M	Schaffner Holding Ag	SINGLE PHASE EMI FILTER	.5 A		UL; IEC; VDE; ENEC-10				THROUGH HOLE MOUNT	300 V		L17.7XB17.1XH12.6 (mm)/L0.697XB0.673XH0.496 (inch)	100 Cel	-40 Cel	12.6 mm	17.1		50/60Hz	17.7 mm
EH20-0.5-02-18M	Schaffner Holding Ag	SINGLE PHASE EMI FILTER	.5 A		UL	2000 V			THROUGH HOLE MOUNT	250 V		L21.0XB21.0XH17.8 (mm)/L0.827XB0.827XH0.701 (inch)	100 Cel	-25 Cel	17.8 mm	21.0	INDUCTANCE 18 MILLI HENRY	400Hz	21 mm
RN112-0.5-02-18M	Schaffner Holding Ag	SINGLE PHASE EMI FILTER	.5 A		UL; IEC; VDE; ENEC-10				THROUGH HOLE MOUNT	300 V		L17.7XB17.1XH12.6 (mm)/L0.697XB0.673XH0.496 (inch)	100 Cel	-40 Cel	12.6 mm	17.1		50/60Hz	17.7 mm
RN212-0.5-02	Schaffner Holding Ag	SINGLE PHASE EMI FILTER	.5 A		UL; VDE				THROUGH HOLE MOUNT	250 V			125 Cel	-40 Cel	20 mm	12.5		50/60Hz	18 mm
RN212-0.5-02-18M	Schaffner Holding Ag	SINGLE PHASE EMI FILTER	.5 A		UL; IEC; VDE; ENEC-10				THROUGH HOLE MOUNT	300 V		L18.0XB12.5XH20.0 (mm)/L0.709XB0.492XH0.787 (inch)	100 Cel	-40 Cel	20 mm	12.5		50/60Hz	18 mm
RN212-0.5-02-15M	Schaffner Holding Ag	SINGLE PHASE EMI FILTER	.5 A		UL; IEC; VDE; ENEC-10				THROUGH HOLE MOUNT	300 V		L18.0XB12.5XH20.0 (mm)/L0.709XB0.492XH0.787 (inch)	100 Cel	-40 Cel	20 mm	12.5		50/60Hz	18 mm
CMS2-14-R	Eaton Corporation	SINGLE PHASE EMI FILTER	.5 A		UL			TAPE AND REEL	SURFACE MOUNT		4	L8.89XB8.89XH6.0 (mm)/L0.35XB0.35XH0.236 (inch)	160 Cel	-40 Cel	6 mm	8.89			8.89 mm
RN112-0.5-02-15M	Schaffner Holding Ag	SINGLE PHASE EMI FILTER	.5 A		UL; IEC; VDE; ENEC-10				THROUGH HOLE MOUNT	300 V		L17.7XB17.1XH12.6 (mm)/L0.697XB0.673XH0.496 (inch)	100 Cel	-40 Cel	12.6 mm	17.1		50/60Hz	17.7 mm
SU7VC-05011	KEMET Corporation	SINGLE PHASE EMI FILTER	.5 A	100 Mohm					THROUGH HOLE MOUNT	125 V		L15.0XB10.0XH8.5 (mm)/L0.591XB0.394XH0.335 (inch)	75 Cel	-25 Cel	8.5 mm	10.0	INDUCTANCE 1.1 MILLI HENRY		15 mm
SSRH7HS-M05324	KEMET Corporation	SINGLE PHASE EMI FILTER	.5 A	100 Mohm	UL			TRAY	THROUGH HOLE MOUNT	250 V			120 Cel	-25 Cel	12 mm	14.5			18 mm

EMI Mains Filters

EMI mains filters are electronic filters that are used to suppress electromagnetic interference (EMI) from mains power lines. They are designed to provide a high level of attenuation of unwanted frequencies while allowing the desired power signal to pass through with minimal distortion.

EMI mains filters use a combination of passive and active components, including capacitors, inductors, resistors, and diodes, to filter out noise and interference from power lines. They can be designed for a wide range of power ratings and frequencies, depending on the application.

EMI mains filters can be designed as low-pass filters, which allow low-frequency power signals to pass through while attenuating high-frequency EMI signals, or as band-stop filters, which block a specific range of frequencies while allowing other frequencies to pass through. They can also be designed with multiple stages of filtering to provide increased attenuation of unwanted frequencies.

EMI mains filters are commonly used in a variety of electronic systems, including power supplies, motor drives, medical equipment, and industrial control systems. They are also used in residential and commercial buildings to suppress EMI noise from power lines and prevent interference with other electronic devices.