15 A EMI Mains Filters 11

Reset All

Part	Manufacturer	Filter Type	Maximum Frequency	Rated Current	Minimum Insulation Resistance	Approvals (V)	Insertion Loss At Minimum Frequency	High Pot	Maximum Leakage Current	Packing Method	Mounting Type	Rated Voltage	Dimensions	Maximum Operating Temperature	Insertion Loss At Maximum Frequency	Minimum Operating Temperature	Manufacturer Series	Height	Width (mm)	Diameter (mm)	Additional Features	Minimum Frequency	Operating Frequency (Hz)	Length
7448031501	Wurth Elektronik	SINGLE PHASE EMI FILTER		15 A		ENEC-10; VDE				TRAY	THROUGH HOLE MOUNT	250 V	L23.0XB17.0XH25.0 (mm)/L0.906XB0.669XH0.984 (inch)	125 Cel		-40 Cel		25 mm	17				50Hz	23 mm
6609047-3	TE Connectivity	SINGLE PHASE EMI FILTER		15 A					1.2 mA		PANEL MOUNT	250 V		40 Cel		-10 Cel							50Hz
SUP-P15H-EPR-4	Okaya Electric Industries	SINGLE PHASE EMI FILTER		15 A	6000 Mohm	CSA; ENEC-14; SEMKO; UL			.6 mA		PANEL MOUNT	250 V		50 Cel		-25 Cel		38 mm	50.8				50/60Hz	84 mm
1-6609037-4	TE Connectivity	SINGLE PHASE EMI FILTER		15 A	6000 Mohm	UL; CSA; VDE		2250 V	.21 mA		PANEL MOUNT	250 V	L93.73XB57.66XH45.72 (mm)/L3.69XB2.27XH1.8 (inch)	40 Cel		-10 Cel		45.72 mm	57.66				50/60Hz	93.73 mm
7448061507	Wurth Elektronik	SINGLE PHASE EMI FILTER		15 A		ENEC-10; VDE				CARTON	THROUGH HOLE MOUNT	250 V	L46.0XB27.0XH46.0 (mm)/L1.811XB1.063XH1.811 (inch)	125 Cel		-40 Cel		46 mm	27.0				50Hz	46 mm
TF3435VU-300Y15R0-1H	TDK	SINGLE PHASE EMI FILTER		15 A		UL; CSA; IEC					THROUGH HOLE MOUNT	280 V	D33XL22 (mm)	120 Cel		-20 Cel	TF			33	INDUCTANCE 30 MICRO HENRY
SCT25XV-150-1R6A010JH	KEMET Corporation	SINGLE PHASE EMI FILTER		15 A	100 Mohm						THROUGH HOLE MOUNT	1000 V		150 Cel		-40 Cel		26.5 mm	33		AEC-Q200			35.5 mm
SCR25XV-150-1R6A010JV	KEMET Corporation	SINGLE PHASE EMI FILTER		15 A	100 Mohm					TRAY	THROUGH HOLE MOUNT	1000 V		120 Cel		-40 Cel		33.5 mm	26		AEC-Q200			35.5 mm
SCT19XV-150-1R3A006JV	KEMET Corporation	SINGLE PHASE EMI FILTER		15 A	100 Mohm						THROUGH HOLE MOUNT	1000 V		150 Cel		-40 Cel		27.5 mm	18.4		AEC-Q200			27 mm
15VT1	TE Connectivity	SINGLE PHASE EMI FILTER	30 MHz	15 A		UL; CSA; VDE	8 dB	2250 V	1.2 mA		PANEL MOUNT	250 V	L138.4XB79.2XH55.4 (mm)/L5.449XB3.118XH2.181 (inch)	40 Cel	35 dB	-10 Cel		55.4 mm	79.2		1/4 INCH QUICK CONNECT TERMINAL	.01 MHz	50/60Hz	138.4 mm
SC-15-05J	KEMET Corporation	SINGLE PHASE EMI FILTER		15 A	100 Mohm	UL				TRAY	THROUGH HOLE MOUNT	250 V	L34.0XB23.0XH33.0 (mm)/L1.339XB0.906XH1.299 (inch)	105 Cel		-25 Cel		33 mm	23.0					34 mm

EMI Mains Filters

EMI mains filters are electronic filters that are used to suppress electromagnetic interference (EMI) from mains power lines. They are designed to provide a high level of attenuation of unwanted frequencies while allowing the desired power signal to pass through with minimal distortion.

EMI mains filters use a combination of passive and active components, including capacitors, inductors, resistors, and diodes, to filter out noise and interference from power lines. They can be designed for a wide range of power ratings and frequencies, depending on the application.

EMI mains filters can be designed as low-pass filters, which allow low-frequency power signals to pass through while attenuating high-frequency EMI signals, or as band-stop filters, which block a specific range of frequencies while allowing other frequencies to pass through. They can also be designed with multiple stages of filtering to provide increased attenuation of unwanted frequencies.

EMI mains filters are commonly used in a variety of electronic systems, including power supplies, motor drives, medical equipment, and industrial control systems. They are also used in residential and commercial buildings to suppress EMI noise from power lines and prevent interference with other electronic devices.