4 A EMI Mains Filters 16

Reset All

Part	Manufacturer	Filter Type	Rated Current	Minimum Insulation Resistance	Approvals (V)	High Pot	Maximum Leakage Current	Packing Method	Mounting Type	Rated Voltage	No. of Terminals	Dimensions	Maximum Operating Temperature	Minimum Operating Temperature	Terminal Finish	Height	Width (mm)	Additional Features	JESD-609 Code	Operating Frequency (Hz)	Length
RN112-4-02-0M7	Schaffner Holding Ag	SINGLE PHASE EMI FILTER	4 A		UL; IEC; VDE; ENEC-10			TUBE	THROUGH HOLE MOUNT	300 V		L17.7XB17.1XH12.6 (mm)/L0.697XB0.673XH0.496 (inch)	100 Cel	-40 Cel		12.6 mm	17.1			50/60Hz	17.7 mm
7448030417	Wurth Elektronik	SINGLE PHASE EMI FILTER	4 A		ENEC-10; VDE			TRAY	THROUGH HOLE MOUNT	250 V			125 Cel	-40 Cel		25 mm	13.5			50Hz	22 mm
RN212-4-02-0M7	Schaffner Holding Ag	SINGLE PHASE EMI FILTER	4 A		UL; IEC; VDE; ENEC-10				THROUGH HOLE MOUNT	300 V		L18.0XB12.5XH20.0 (mm)/L0.709XB0.492XH0.787 (inch)	100 Cel	-40 Cel		20 mm	12.5			50/60Hz	18 mm
RN114-4-02-1M5	Schaffner Holding Ag	SINGLE PHASE EMI FILTER	4 A		UL; IEC; VDE; ENEC-10				THROUGH HOLE MOUNT	300 V		L22.5XB21.5XH13.2 (mm)/L0.886XB0.846XH0.52 (inch)	100 Cel	-40 Cel		13.2 mm	21.5			50/60Hz	22.5 mm
NAC-04-472-D	Cosel	SINGLE PHASE EMI FILTER	4 A		UL; CSA; VDE; ENEC-10	2500 V	1 mA		DIN RAIL MOUNT	250 V		L92.0XB53.0XH41.0 (mm)/L3.622XB2.087XH1.614 (inch)	85 Cel	-40 Cel		41 mm	53.0			60Hz	92 mm
744841414	Wurth Elektronik	SINGLE PHASE EMI FILTER	4 A		ENEC-10; IEC; VDE			TRAY; PAPER	THROUGH HOLE MOUNT	250 V		L16.0XB7.5XH17.5 (mm)/L0.63XB0.295XH0.689 (inch)	125 Cel	-40 Cel	Tin/Silver/Copper (Sn/Ag/Cu)	17.5 mm	7.5		e1	50Hz	16 mm
RN122-4-02-1M8	Schaffner Holding Ag	SINGLE PHASE EMI FILTER	4 A		UL; IEC; VDE; ENEC-10				THROUGH HOLE MOUNT	300 V		L28.0XB27.0XH16.5 (mm)/L1.102XB1.063XH0.65 (inch)	100 Cel	-40 Cel		16.5 mm	27.0			50/60Hz	28 mm
RN122-4-02-3M3	Schaffner Holding Ag	SINGLE PHASE EMI FILTER	4 A		UL; IEC; VDE; ENEC-10				THROUGH HOLE MOUNT	300 V		L28.0XB27.0XH16.5 (mm)/L1.102XB1.063XH0.65 (inch)	100 Cel	-40 Cel		16.5 mm	27.0			50/60Hz	28 mm
RN122-4-02	Schaffner Holding Ag	SINGLE PHASE EMI FILTER	4 A		UL; VDE				THROUGH HOLE MOUNT	250 V			125 Cel	-40 Cel		16.5 mm	27			50/60Hz	28 mm
5500.2003	Schurter Ag	SINGLE PHASE EMI FILTER	4 A		UL; CUL; VDE; ENEC-10	2700 V	.25 mA		THROUGH HOLE MOUNT	250 V	5	L25.0XB25.0XH25.0 (mm)/L0.984XB0.984XH0.984 (inch)	85 Cel	-25 Cel	TIN	25 mm	25.0	INDUCTANCE 1.5 MILLIHENRY	e3	60Hz	25 mm
744834405	Wurth Elektronik	SINGLE PHASE EMI FILTER	4 A						THROUGH HOLE MOUNT	250 V	4	L32.5XB28.0XH22.0 (mm)/L1.28XB1.102XH0.866 (inch)	125 Cel	-40 Cel	Tin (Sn) over Copper (Cu)	22 mm	28.0			50Hz	32.5 mm
RN114-4-02	Schaffner Holding Ag	SINGLE PHASE EMI FILTER	4 A		UL; VDE				THROUGH HOLE MOUNT	250 V			125 Cel	-40 Cel		13.2 mm	21.5			50/60Hz	22.5 mm
RN222-4-02-3M3	Schaffner Holding Ag	SINGLE PHASE EMI FILTER	4 A		UL; IEC; VDE; ENEC-10				THROUGH HOLE MOUNT	300 V		L31.0XB18.0XH29.3 (mm)/L1.22XB0.709XH1.154 (inch)	100 Cel	-40 Cel		29.3 mm	18.0			50/60Hz	31 mm
SC-05-50J	KEMET Corporation	SINGLE PHASE EMI FILTER	4 A	100 Mohm	UL			TRAY	THROUGH HOLE MOUNT	250 V		L34.0XB23.0XH33.0 (mm)/L1.339XB0.906XH1.299 (inch)	105 Cel	-25 Cel		33 mm	23.0				34 mm
SS30V-400021	KEMET Corporation	SINGLE PHASE EMI FILTER	4 A	100 Mohm	UL	500 V		TRAY	THROUGH HOLE MOUNT	250 V			120 Cel	-25 Cel		33 mm	22.5				31 mm
SSRH24NVS-40059	KEMET Corporation	SINGLE PHASE EMI FILTER	4 A	100 Mohm	UL			TRAY	THROUGH HOLE MOUNT	250 V			120 Cel	-25 Cel		31 mm	20				25.5 mm

EMI Mains Filters

EMI mains filters are electronic filters that are used to suppress electromagnetic interference (EMI) from mains power lines. They are designed to provide a high level of attenuation of unwanted frequencies while allowing the desired power signal to pass through with minimal distortion.

EMI mains filters use a combination of passive and active components, including capacitors, inductors, resistors, and diodes, to filter out noise and interference from power lines. They can be designed for a wide range of power ratings and frequencies, depending on the application.

EMI mains filters can be designed as low-pass filters, which allow low-frequency power signals to pass through while attenuating high-frequency EMI signals, or as band-stop filters, which block a specific range of frequencies while allowing other frequencies to pass through. They can also be designed with multiple stages of filtering to provide increased attenuation of unwanted frequencies.

EMI mains filters are commonly used in a variety of electronic systems, including power supplies, motor drives, medical equipment, and industrial control systems. They are also used in residential and commercial buildings to suppress EMI noise from power lines and prevent interference with other electronic devices.