5 A EMI Mains Filters 18

Reset All

Part	Manufacturer	Filter Type	Maximum Frequency	Rated Current	Minimum Insulation Resistance	Approvals (V)	Insertion Loss At Minimum Frequency	High Pot	Maximum Leakage Current	Packing Method	Mounting Type	Rated Voltage	No. of Terminals	Dimensions	Maximum Operating Temperature	Insertion Loss At Maximum Frequency	Minimum Operating Temperature	Terminal Finish	Manufacturer Series	Height	Width (mm)	Diameter (mm)	Additional Features	JESD-609 Code	Minimum Frequency	Operating Frequency (Hz)	Length
7448030509	Wurth Elektronik	SINGLE PHASE EMI FILTER		5 A						TRAY	THROUGH HOLE MOUNT	250 V		L22.0XB13.5XH25.0 (mm)/L0.866XB0.531XH0.984 (inch)	125 Cel		-40 Cel			25 mm	13.5					50Hz	22 mm
5VR1	TE Connectivity	SINGLE PHASE EMI FILTER	10 MHz	5 A		UL; CSA; VDE	5 dB	2250 V	.4 mA		PANEL MOUNT	250 V		L85.1XB52.6XH29.5 (mm)/L3.35XB2.07XH1.16 (inch)	40 Cel	65 dB	-10 Cel			29.5 mm	52.6		1/4 INCH QUICK CONNECT TERMINAL		.15 MHz	50/60Hz	85.1 mm
744834433	Wurth Elektronik	SINGLE PHASE EMI FILTER		5 A							THROUGH HOLE MOUNT	250 V	4	L32.5XB28.0XH22.0 (mm)/L1.28XB1.102XH0.866 (inch)	125 Cel		-40 Cel	Tin (Sn) over Copper (Cu)		22 mm	28.0					50Hz	32.5 mm
SC-05-10J	KEMET Corporation	SINGLE PHASE EMI FILTER		5 A	100 Mohm	UL				TRAY	THROUGH HOLE MOUNT	250 V		L25.0XB20.0XH27.0 (mm)/L0.984XB0.787XH1.063 (inch)	120 Cel		-25 Cel			27 mm	20.0						25 mm
RSEL-2005M	TDK	SINGLE PHASE EMI FILTER		5 A	100 Mohm	UL; CSA; EN; SEMKO			1 mA		CHASSIS MOUNT	250 V		L56.0XB38.0XH30.0 (mm)/L2.205XB1.496XH1.181 (inch)	85 Cel		-25 Cel			30 mm	38.0					60Hz	56 mm
SCF20-05-550	KEMET Corporation	SINGLE PHASE EMI FILTER		5 A							THROUGH HOLE MOUNT	250 V	4	L25.0XB15.5XH25.0 (mm)/L0.984XB0.61XH0.984 (inch)	70 Cel		-25 Cel			25 mm	15.5					50Hz	25 mm
7448025003	Wurth Elektronik	SINGLE PHASE EMI FILTER		5 A		ENEC-10; VDE				TRAY	THROUGH HOLE MOUNT	250 V			125 Cel		-40 Cel			22 mm	14					50Hz	18 mm
SN8S-130	KEMET Corporation	SINGLE PHASE EMI FILTER		5 A						TRAY	THROUGH HOLE MOUNT				105 Cel		-25 Cel			9 mm		18
6609032-9	TE Connectivity	SINGLE PHASE EMI FILTER	10 MHz	5 A		UL; CSA; VDE	5 dB	1450 V	.4 mA		PANEL MOUNT	250 V		L97.8XB52.6XH29.5 (mm)/L3.85XB2.071XH1.161 (inch)	40 Cel	65 dB	-10 Cel			29.5 mm	52.6		1/4 INCH QUICK CONNECT TERMINAL		.15 MHz	50/60Hz	97.8 mm
744866392	Wurth Elektronik	SINGLE PHASE EMI FILTER		5 A							THROUGH HOLE MOUNT	250 V			125 Cel		-40 Cel			45 mm	26					50Hz	37 mm
SC-05-100J	KEMET Corporation	SINGLE PHASE EMI FILTER		5 A	100 Mohm	UL		500 V		TRAY	THROUGH HOLE MOUNT	250 V			120 Cel		-25 Cel			33 mm	23						34 mm
TF2326VU-300Y5R0-1H	TDK	SINGLE PHASE EMI FILTER		5 A		UL; CSA; IEC					THROUGH HOLE MOUNT	280 V		D23XL20 (mm)	120 Cel		-20 Cel		TF			23	INDUCTANCE 30 MICRO HENRY
5VK1	TE Connectivity	SINGLE PHASE EMI FILTER	30 MHz	5 A		UL; CSA; VDE	6 dB	2250 V	.4 mA		PANEL MOUNT	250 V		L78.7XB71.4XH29.5 (mm)/L3.1XB2.81XH1.16 (inch)	40 Cel	50 dB	-10 Cel			29.5 mm	71.4		1/4 INCH QUICK CONNECT TERMINAL		.15 MHz	50/60Hz	78.7 mm
SCF-05-350	KEMET Corporation	SINGLE PHASE EMI FILTER		5 A							THROUGH HOLE MOUNT	250 V	4	L15.0XB12.0XH15.0 (mm)/L0.591XB0.472XH0.591 (inch)	65 Cel		-25 Cel			15 mm	12.0					50Hz	15 mm
P3216-AL	Coilcraft	SINGLE PHASE EMI FILTER		5 A		UL					THROUGH HOLE MOUNT		4	L31.8XB15.88XH31.2 (mm)/L1.252XB0.625XH1.228 (inch)	85 Cel		-40 Cel	Tin/Silver (Sn/Ag)		31.2 mm	15.88			e2			31.8 mm
SC22-05-30J	KEMET Corporation	SINGLE PHASE EMI FILTER		5 A	100 Mohm	UL		500 V		TRAY	THROUGH HOLE MOUNT	250 V			120 Cel		-25 Cel			29 mm	18.5						28 mm
SCR-050-0R9A070JH	KEMET Corporation	SINGLE PHASE EMI FILTER		5 A	100 Mohm						THROUGH HOLE MOUNT	250 V		L29.0XB23.0XH27.0 (mm)/L1.142XB0.906XH1.063 (inch)	50 Cel		-25 Cel			27 mm	23.0		INDUCTANCE 7 MILLI HENRY				29 mm
SSRH24NH-50041	KEMET Corporation	SINGLE PHASE EMI FILTER		5 A	100 Mohm	UL				TRAY	THROUGH HOLE MOUNT	250 V			120 Cel		-25 Cel			18 mm	25.5						25.5 mm

EMI Mains Filters

EMI mains filters are electronic filters that are used to suppress electromagnetic interference (EMI) from mains power lines. They are designed to provide a high level of attenuation of unwanted frequencies while allowing the desired power signal to pass through with minimal distortion.

EMI mains filters use a combination of passive and active components, including capacitors, inductors, resistors, and diodes, to filter out noise and interference from power lines. They can be designed for a wide range of power ratings and frequencies, depending on the application.

EMI mains filters can be designed as low-pass filters, which allow low-frequency power signals to pass through while attenuating high-frequency EMI signals, or as band-stop filters, which block a specific range of frequencies while allowing other frequencies to pass through. They can also be designed with multiple stages of filtering to provide increased attenuation of unwanted frequencies.

EMI mains filters are commonly used in a variety of electronic systems, including power supplies, motor drives, medical equipment, and industrial control systems. They are also used in residential and commercial buildings to suppress EMI noise from power lines and prevent interference with other electronic devices.