Analog Devices General Purpose Electronic Filters 55
| Part | RoHS | Manufacturer | Filter Type | Maximum Frequency | Minimum No. of Sections | Power Supply (V) | Maximum No. of Sections | Output Impedance (ohm) | Average Input Power | Packing Method | Connector (Input) | Mounting Type | No. of Terminals | I/O Impedance | Sub-Category | Dimensions | Maximum Operating Temperature | Attenuation At Maximum Frequency | Minimum Attenuation Frequency | Package Material | Minimum Operating Temperature | Attenuation At Minimum Frequency | Terminal Finish | Maximum Attenuation Frequency | Manufacturer Series | Height | Width (mm) | Diameter (mm) | Maximum Insertion Loss | Connector (Output) | Additional Features | Center/Cutoff Frequency (fo/fc) | JESD-609 Code | Minimum Frequency | Voltage Standing Wave Ratio | Impedance (Input) | Length |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
Analog Devices |
HIGH PASS FILTER |
1 |
1 |
50 OHM |
TR |
SURFACE MOUNT |
56 |
105 Cel |
-55 Cel |
1.03 mm |
9.15 |
10000 MHz |
50 OHM |
9.15 mm |
||||||||||||||||||||||
|
Analog Devices |
BAND PASS FILTER |
50 OHM |
SURFACE MOUNT |
24 |
L4.1XB4.1XH1.0 (mm)/L0.161XB0.161XH0.039 (inch) |
85 Cel |
-40 Cel |
1 mm |
4.1 |
15000 MHz |
50 OHM |
4.1 mm |
|||||||||||||||||||||||||
|
|
Analog Devices |
HIGH PASS FILTER |
|||||||||||||||||||||||||||||||||||
|
|
Analog Devices |
BAND PASS FILTER |
50 OHM |
.01 W |
TR, 7 INCH |
SURFACE MOUNT |
24 |
L4.1XB4.1XH0.8 (mm)/L0.161XB0.161XH0.031 (inch) |
85 Cel |
-40 Cel |
.8 mm |
4.1 |
15500 MHz |
50 OHM |
4.1 mm |
||||||||||||||||||||||
|
|
Analog Devices |
HIGH PASS FILTER |
|||||||||||||||||||||||||||||||||||
|
Analog Devices |
BAND PASS FILTER |
||||||||||||||||||||||||||||||||||||
|
Analog Devices |
HIGH PASS FILTER |
1 |
1 |
50 OHM |
SURFACE MOUNT |
30 |
105 Cel |
-55 Cel |
.94 mm |
3.1 |
5 dB |
9.5 MHz |
50 OHM |
6.1 mm |
General-purpose electronic filters are electronic circuits that are used to selectively filter out unwanted frequencies from an input signal. They are designed to provide a high level of selectivity and precision in filtering, making them ideal for use in a wide range of applications.
General-purpose electronic filters can be designed with a variety of filter responses, including low-pass, high-pass, band-pass, and band-stop. They can also be designed with different cutoff frequencies and Q values, depending on the application.
General-purpose electronic filters use a combination of passive and active components, including resistors, capacitors, inductors, and op-amps, to filter out unwanted frequencies from an input signal. They can be designed for a wide range of input signals and frequencies, from audio signals to RF and microwave signals.
General-purpose electronic filters are commonly used in a variety of electronic systems, including audio processing, signal conditioning, and control systems. They are also used in scientific research applications, such as particle accelerators and radio telescopes.