Coilcraft General Purpose Electronic Filters 5
| Part | RoHS | Manufacturer | Filter Type | Maximum Frequency | Minimum No. of Sections | Power Supply (V) | Maximum No. of Sections | Output Impedance (ohm) | Average Input Power | Packing Method | Connector (Input) | Mounting Type | No. of Terminals | I/O Impedance | Sub-Category | Dimensions | Maximum Operating Temperature | Attenuation At Maximum Frequency | Minimum Attenuation Frequency | Package Material | Minimum Operating Temperature | Attenuation At Minimum Frequency | Terminal Finish | Maximum Attenuation Frequency | Manufacturer Series | Height | Width (mm) | Diameter (mm) | Maximum Insertion Loss | Connector (Output) | Additional Features | Center/Cutoff Frequency (fo/fc) | JESD-609 Code | Minimum Frequency | Voltage Standing Wave Ratio | Impedance (Input) | Length |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
Coilcraft |
LOW PASS FILTER |
50 OHM |
TRAY |
THROUGH HOLE MOUNT |
9 |
L24.13XB4.7XH11.43 (mm)/L0.95XB0.185XH0.45 (inch) |
85 Cel |
-40 Cel |
Matte Tin (Sn) - with Nickel (Ni) barrier |
11.43 mm |
4.7 |
.3 dB |
7 POLE; IMPEDANCE 75 OHM VERSION ALSO AVAILABLE |
15 MHz |
e3 |
50 OHM |
24.13 mm |
|||||||||||||||||||
|
|
Coilcraft |
LOW PASS FILTER |
50 OHM |
TRAY |
THROUGH HOLE MOUNT |
9 |
L24.13XB4.7XH11.43 (mm)/L0.95XB0.185XH0.45 (inch) |
85 Cel |
-40 Cel |
Matte Tin (Sn) - with Nickel (Ni) barrier |
11.43 mm |
4.7 |
.3 dB |
7 POLE; IMPEDANCE 75 OHM VERSION ALSO AVAILABLE |
1.5 MHz |
e3 |
50 OHM |
24.13 mm |
|||||||||||||||||||
|
|
Coilcraft |
LOW PASS FILTER |
50 OHM |
TRAY |
THROUGH HOLE MOUNT |
9 |
L24.13XB4.7XH11.43 (mm)/L0.95XB0.185XH0.45 (inch) |
85 Cel |
-40 Cel |
Matte Tin (Sn) - with Nickel (Ni) barrier |
11.43 mm |
4.7 |
.3 dB |
7 POLE; IMPEDANCE 75 OHM VERSION ALSO AVAILABLE |
6 MHz |
e3 |
50 OHM |
24.13 mm |
|||||||||||||||||||
|
|
Coilcraft |
HIGH PASS FILTER |
50 OHM |
TAPE AND REEL |
SURFACE MOUNT |
3 |
L5.21XB4.06XH2.16 (mm)/L0.205XB0.16XH0.085 (inch) |
85 Cel |
-40 Cel |
GOLD/SILVER |
2.16 mm |
4.06 |
.3 dB |
15 MHz |
e4 |
50 OHM |
5.21 mm |
||||||||||||||||||||
|
|
Coilcraft |
LOW PASS FILTER |
50 OHM |
TAPE AND REEL |
SURFACE MOUNT |
3 |
L5.21XB4.06XH2.16 (mm)/L0.205XB0.16XH0.085 (inch) |
85 Cel |
-40 Cel |
Gold (Au) |
2.16 mm |
4.06 |
.3 dB |
300 MHz |
e4 |
50 OHM |
5.21 mm |
General-purpose electronic filters are electronic circuits that are used to selectively filter out unwanted frequencies from an input signal. They are designed to provide a high level of selectivity and precision in filtering, making them ideal for use in a wide range of applications.
General-purpose electronic filters can be designed with a variety of filter responses, including low-pass, high-pass, band-pass, and band-stop. They can also be designed with different cutoff frequencies and Q values, depending on the application.
General-purpose electronic filters use a combination of passive and active components, including resistors, capacitors, inductors, and op-amps, to filter out unwanted frequencies from an input signal. They can be designed for a wide range of input signals and frequencies, from audio signals to RF and microwave signals.
General-purpose electronic filters are commonly used in a variety of electronic systems, including audio processing, signal conditioning, and control systems. They are also used in scientific research applications, such as particle accelerators and radio telescopes.