TDK SAW Filters 70

Reset All

Part	Manufacturer	Filter Type	Power Supply (V)	No. of Functions	Screening Level	Output Impedance (ohm)	Packing Method	Mounting Type	No. of Terminals	Sub-Category	Dimensions	Maximum Operating Temperature	Attenuation At Maximum Frequency	Maximum Attenuation Frequency (± Δf)	Package Material	Minimum Operating Temperature	Minimum Attenuation Frequency (± Δf)	Terminal Finish	Manufacturer Series	Height	Width (mm)	Maximum Insertion Loss	Additional Features	Center/Cutoff Frequency (fo/fc)	JESD-609 Code	Impedance (Input)	Length
B39921B3588U410	TDK	SAW FILTER		1		50 OHM		SURFACE MOUNT	6	SAW Filters	L3.0XB3.0XH1.1 (mm)/L0.118XB0.118XH0.043 (inch)	85 Cel	22 dB	32000 kHz	CERAMIC	-40 Cel		NICKEL GOLD		1.1 mm	3.0	3.5 dB	AEC-Q200; TEMPERATURE 0 TO 70 ALSO AVAILABLE	915 MHz	e4	50 OHM	3 mm
B39162B4327P810	TDK	SAW FILTER		1		50 OHM		SURFACE MOUNT	5		L1.4XB1.1XH0.4 (mm)/L0.055XB0.043XH0.016 (inch)	85 Cel				-40 Cel				.4 mm	1.1	2 dB		1582.4 MHz		50 OHM	1.4 mm
B39162B8813P810	TDK	SAW FILTER		1		50 OHM		SURFACE MOUNT	5		L1.1XB0.9XH0.45 (mm)/L0.043XB0.035XH0.018 (inch)	85 Cel				-30 Cel		Gold (Au) - with Nickel (Ni) barrier		.45 mm	0.9	1.9 dB		1582.47 MHz	e4	50 OHM	1.1 mm
B39921B3588U410W9	TDK	SAW FILTER		1		50 OHM		SURFACE MOUNT	6		L3.0XB3.0XH1.1 (mm)/L0.118XB0.118XH0.043 (inch)	70 Cel				0 Cel		Gold (Au)		1.1 mm	3.0	3.3 dB	AEC-Q200 QUALIFIED	915 MHz	e4	50 OHM	3 mm
B39242B8328P810	TDK	SAW FILTER		1		50 OHM//6.8 nH		SURFACE MOUNT	5		L1.4XB1.1XH0.45 (mm)/L0.055XB0.043XH0.018 (inch)	85 Cel				-20 Cel		Gold (Au) - with Nickel (Ni) barrier		.45 mm	1.1	2.9 dB		2442 MHz	e4	50 OHM//6.8 nH	1.4 mm
B39431B3710U410	TDK	SAW FILTER		1		50 OHM		SURFACE MOUNT	6	SAW Filters	L3.0XB3.0XH1.1 (mm)/L0.118XB0.118XH0.043 (inch)	105 Cel			CERAMIC	-40 Cel		Nickel/Gold (Ni/Au)		1.1 mm	3.0	3.1 dB	AEC-Q200; TEMPERATURE -40 TO 85 ALSO AVAILABLE	433.92 MHz	e4	50 OHM	3 mm
B39871B3725U410	TDK	SAW FILTER		1		50 OHM		SURFACE MOUNT	6	SAW Filters	L3.0XB3.0XH1.1 (mm)/L0.118XB0.118XH0.043 (inch)	70 Cel			CERAMIC	-20 Cel	16000 kHz	Gold (Au) - with Nickel (Ni) barrier		1.1 mm	3.0	3.5 dB		869 MHz	e4	50 OHM	3 mm
B39921B3728U410	TDK	SAW FILTER		1		50 OHM		SURFACE MOUNT	6	SAW Filters	L3.0XB3.0XH1.1 (mm)/L0.118XB0.118XH0.043 (inch)	85 Cel			CERAMIC	-40 Cel		Nickel/Gold (Ni/Au)		1.1 mm	3.0	4 dB		915 MHz	e4	50 OHM	3 mm
B39921B3407U410	TDK	SAW FILTER		1		50 OHM		SURFACE MOUNT	6		L3.0XB3.0XH1.1 (mm)/L0.118XB0.118XH0.043 (inch)	85 Cel				-40 Cel				1.1 mm	3.0	2 dB	AEC-Q200	922.5 MHz		50 OHM	3 mm
B39252B5115U410	TDK	SAW FILTER		1		50 OHM		SURFACE MOUNT	6	SAW Filters	L3.0XB3.0XH1.1 (mm)/L0.118XB0.118XH0.043 (inch)	85 Cel			CERAMIC	-40 Cel		Gold (Au) - with Nickel (Ni) barrier		1.1 mm	3.0	3.3 dB	OPERATING TEMPERATURE -10 TO 85 ALSO POSSIBLE	2535 MHz	e4	50 OHM	3 mm
B39172B9443M410	TDK	SAW FILTER		1		50 OHM		SURFACE MOUNT	5	SAW Filters	L1.4XB1.1XH0.4 (mm)/L0.055XB0.043XH0.016 (inch)	75 Cel			PLASTIC	-20 Cel		Gold (Au) - with Nickel (Ni) barrier		.4 mm	1.1	3.1 dB	OPERATING TEMPERATURE -30 TO 85 ALSO POSSIBLE	1732.5 MHz	e4	50 OHM	1.4 mm
B39941-B8803-P810	TDK	SAW FILTER		2		50 OHM		SURFACE MOUNT	5			90 Cel				-20 Cel				.45 mm	0.9	4 dB		942.5 MHz		50 OHM	1.1 mm
B39871B3717U410	TDK	SAW FILTER		1	AEC-Q200	50 OHM		SURFACE MOUNT	6	SAW Filters	L3.0XB3.0XH1.1 (mm)/L0.118XB0.118XH0.043 (inch)	85 Cel			CERAMIC	-40 Cel		Nickel/Gold (Ni/Au)		1.1 mm	3.0	3.8 dB		866.5 MHz	e4	50 OHM	3 mm
B39162B3413U410	TDK	SAW FILTER		1		50 OHM		SURFACE MOUNT	6		L3.0XB3.0XH1.1 (mm)/L0.118XB0.118XH0.043 (inch)	85 Cel				-40 Cel				1.1 mm	3.0	2.6 dB	AEC-Q200	1587 MHz		50 OHM	3 mm
B39921B4301F210	TDK	SAW FILTER		1	AEC-Q200	50 OHM		SURFACE MOUNT	5	SAW Filters	L1.4XB1.1XH0.4 (mm)/L0.055XB0.043XH0.016 (inch)	85 Cel			PLASTIC	-40 Cel				.4 mm	1.1	2.5 dB		915 MHz		50 OHM	1.4 mm
B39871B3440U410	TDK	SAW FILTER		1		50 OHM		SURFACE MOUNT	6		L3.0XB3.0XH1.1 (mm)/L0.118XB0.118XH0.043 (inch)	85 Cel				-40 Cel		Gold (Au) - with Nickel (Ni) barrier		1.1 mm	3.0	3.2 dB		869 MHz	e4	50 OHM	3 mm
B39871B4316P810	TDK	SAW FILTER		1	AEC-Q200	50 OHM		SURFACE MOUNT	5	SAW Filters	L1.4XB1.1XH0.4 (mm)/L0.055XB0.043XH0.016 (inch)	85 Cel			PLASTIC	-40 Cel				.4 mm	1.1	2.9 dB		869 MHz		50 OHM	1.4 mm
B39162B9415K610	TDK	SAW FILTER		1		50 OHM		SURFACE MOUNT	5	SAW Filters	L1.4XB1.1XH0.4 (mm)/L0.055XB0.043XH0.016 (inch)	85 Cel			PLASTIC	-40 Cel		Gold (Au) - with Nickel (Ni) barrier		.4 mm	1.1	1 dB		1575.42 MHz	e4	50 OHM	1.4 mm
B39162B8313P810	TDK	SAW FILTER						SURFACE MOUNT	5	SAW Filters		85 Cel			PLASTIC	-30 Cel
B39171-B5068-H810	TDK	SAW FILTER		1		50 OHM		SURFACE MOUNT	12	SAW Filters	L7.0XB5.0XH1.33 (mm)/L0.276XB0.197XH0.052 (inch)	85 Cel			CERAMIC	-40 Cel		Gold (Au) - with Nickel (Ni) barrier		1.33 mm	5.0	11 dB	INSERTION LOSS INCLUDING MATCHING NETWORK	173.8 MHz	e4	50 OHM	7 mm
B39192B9459P810	TDK	SAW FILTER		1		50 OHM		SURFACE MOUNT	5	SAW Filters	L1.4XB1.1XH0.4 (mm)/L0.055XB0.043XH0.016 (inch)	85 Cel			PLASTIC	-30 Cel		Gold (Au) - with Nickel (Ni) barrier		.4 mm	1.1	3.8 dB		1880 MHz	e4	50 OHM	1.4 mm
B39242B9413K610	TDK	SAW FILTER		1		50 OHM//2.5 nH		SURFACE MOUNT	5	SAW Filters	L1.4XB1.1XH0.4 (mm)/L0.055XB0.043XH0.016 (inch)	75 Cel			PLASTIC	-20 Cel		Gold (Au) - with Nickel (Ni) barrier		.4 mm	1.1	2.8 dB		2441.75 MHz	e4	50 OHM//1.5 nH	1.4 mm
B39461B5058Z810	TDK	SAW FILTER		1		50 OHM		SURFACE MOUNT	8	SAW Filters	L3.8XB3.8XH1.5 (mm)/L0.15XB0.15XH0.059 (inch)	60 Cel			CERAMIC	-30 Cel		Gold (Au) - with Nickel (Ni) barrier		1.5 mm	3.8	3.2 dB		460 MHz	e4	50 OHM	3.8 mm
B39122-B4057-U510	TDK	SAW FILTER		1		50 OHM		SURFACE MOUNT	6	SAW Filters	L3.0XB3.0XH1.1 (mm)/L0.118XB0.118XH0.043 (inch)	85 Cel			CERAMIC	-40 Cel		GOLD OVER NICKEL	B4057	1.1 mm		3.5 dB		1228 MHz	e4	50 OHM	3 mm
B39162B3913U410	TDK	SAW FILTER		1	AEC-Q200	50 OHM		SURFACE MOUNT	6	SAW Filters	L3.0XB3.0XH1.1 (mm)/L0.118XB0.118XH0.043 (inch)	85 Cel			CERAMIC	-40 Cel		Gold (Au) - with Nickel (Ni) barrier		1.1 mm	3.0	3 dB		1588 MHz	e4	50 OHM	3 mm
B39182B9402K610	TDK	SAW FILTER		1		150 OHM//22 nH		SURFACE MOUNT	5	SAW Filters	L1.4XB1.1XH0.4 (mm)/L0.055XB0.043XH0.016 (inch)	75 Cel			PLASTIC	-20 Cel		Gold (Au) - with Nickel (Ni) barrier		.4 mm	1.1	2.4 dB		1842.5 MHz	e4	50 OHM	1.4 mm
B39202-B9300-G110	TDK	SAW FILTER		2		150 OHM//18 nH		SURFACE MOUNT	10		L2.0XB1.6XH0.68 (mm)/L0.079XB0.063XH0.027 (inch)	75 Cel				-20 Cel		Gold (Au) - with Nickel (Ni) barrier		.68 mm	1.6	2.3 dB	CENTER FREQUENCY 1842.5 MHZ ALSO AVAILABLE	1960 MHz	e4	50 OHM	2 mm
B39242B9604P810	TDK	SAW FILTER		1		50 OHM		SURFACE MOUNT	5		L1.4XB1.1XH0.4 (mm)/L0.055XB0.043XH0.016 (inch)	85 Cel				-20 Cel		Gold (Au)		.4 mm	1.1	3.3 dB		2441 MHz	e4	50 OHM	1.4 mm
B39731B8811P810	TDK	SAW FILTER		2		50 OHM		SURFACE MOUNT	5			85 Cel				-40 Cel				.4 mm	0.9	2.6 dB		737.5 MHz		50 OHM	1.1 mm
B39871B8825P810	TDK	SAW FILTER		1		50 OHM//1.5 nH		SURFACE MOUNT	5			90 Cel				-30 Cel				.45 mm	0.9	2.8 dB	OTHER CENTER FREQ ALSO AVAILABLE	881.5 MHz		50 OHM//1.5 nH	1.1 mm
B39881B9439M410	TDK	SAW FILTER	5	1		50 OHM		SURFACE MOUNT	5	SAW Filters	L1.4XB1.1XH0.4 (mm)/L0.055XB0.043XH0.016 (inch)	85 Cel			PLASTIC	-30 Cel		Gold (Au) - with Nickel (Ni) barrier		.4 mm	1.1	2.5 dB		881.5 MHz	e4	50 OHM	1.4 mm
B39182B9500L310	TDK	SAW FILTER		2		150 OHM//13 nH		SURFACE MOUNT	10	SAW Filters	L1.8XB1.4XH0.68 (mm)/L0.071XB0.055XH0.027 (inch)	75 Cel			PLASTIC	-20 Cel		Gold (Au) - with Nickel (Ni) barrier		.68 mm	1.4	2.2 dB	CENTER FREQUENCY 942.5 MHZ ALSO AVAILABLE	1842.5 MHz	e4	50 OHM	1.8 mm
B39212-B9876-P810	TDK	SAW FILTER						SURFACE MOUNT	5	SAW Filters		90 Cel			PLASTIC	-30 Cel
B39162B4060U810	TDK	SAW FILTER		1		50 OHM		SURFACE MOUNT	8	SAW Filters	L3.0XB3.0XH1.1 (mm)/L0.118XB0.118XH0.043 (inch)	105 Cel			CERAMIC	-40 Cel		Nickel/Gold (Ni/Au)		1.1 mm	3.0	2 dB		1575.42 MHz	e4	50 OHM	3 mm
B39162-B3517-U510	TDK	SAW FILTER		1		100 OHM//18nH		SURFACE MOUNT	6	SAW Filters	L3.0XB3.0XH1.1 (mm)/L0.118XB0.118XH0.043 (inch)	85 Cel			CERAMIC	-40 Cel				1.1 mm	3.0	2.5 dB		1586 MHz		50 OHM	3 mm
B39901B9442M410	TDK	SAW FILTER		1		50 OHM		SURFACE MOUNT	5	SAW Filters	L1.4XB1.1XH0.4 (mm)/L0.055XB0.043XH0.016 (inch)	85 Cel			PLASTIC	-20 Cel		Gold (Au) - with Nickel (Ni) barrier		.4 mm	1.1	3.6 dB		897.5 MHz	e4	50 OHM	1.4 mm
B39871B3715U410	TDK	SAW FILTER		1		50 OHM		SURFACE MOUNT	6	SAW Filters	L3.0XB3.0XH1.1 (mm)/L0.118XB0.118XH0.043 (inch)	85 Cel			CERAMIC	-40 Cel		NICKEL GOLD		1.1 mm	3.0	3.3 dB		869 MHz	e4	50 OHM	3 mm
B39182B8812P810	TDK	SAW FILTER		1		50 OHM//2 nH		SURFACE MOUNT			L1.1XB0.9XH0.45 (mm)/L0.043XB0.035XH0.018 (inch)	85 Cel				-20 Cel				.45 mm	0.9	3 dB	TR, 7/13 INCH	1842.5 MHz		50 OHM//2 nH	1.1 mm
B39212B9869P810	TDK	SAW FILTER		2		100 OHM//15 nH		SURFACE MOUNT	5			85 Cel				-40 Cel				.4 mm	0.9	2.1 dB		2140 MHz		50 OHM	1.1 mm
B39172B5364U410	TDK	SAW FILTER		1		50 OHM	BOX; TR, 13 INCH	SURFACE MOUNT	6			95 Cel				-40 Cel		GOLD OVER NICKEL		1.1 mm	3	3.5 dB	TR, 7 INCH ALSO AVAILABLE	1747.5 MHz	e4	50 OHM	3 mm
B39881B9867P810	TDK	SAW FILTER		1		100 OHM		SURFACE MOUNT	5	SAW Filters	L1.1XB0.9XH0.4 (mm)/L0.043XB0.035XH0.016 (inch)	85 Cel			PLASTIC	-20 Cel				.4 mm	0.9	2.4 dB		881.5 MHz		50 OHM	1.1 mm
B39871B3744H110	TDK	SAW FILTER		1		290 OHM//1.3 pF		SURFACE MOUNT	6	SAW Filters	L3.0XB3.0XH1.0 (mm)/L0.118XB0.118XH0.039 (inch)	105 Cel			PLASTIC	-45 Cel		Nickel/Gold (Ni/Au)		1 mm	3.0	3.7 dB	INSERTION LOSS INCLUDING MATCHING ELEMENTS	868.3 MHz	e4	290 OHM//1.3 pF	3 mm
B39162B9621P810	TDK	SAW FILTER		1		50 OHM		SURFACE MOUNT	5		L1.4XB1.1XH0.4 (mm)/L0.055XB0.043XH0.016 (inch)	85 Cel				-10 Cel				.4 mm	1.1	1.9 dB		1582.47 MHz		50 OHM	1.4 mm
B39272B9898P810	TDK	SAW FILTER						SURFACE MOUNT	5	SAW Filters		85 Cel			PLASTIC	-20 Cel
B39881B9456P810	TDK	SAW FILTER		1		100 OHM		SURFACE MOUNT	5	SAW Filters	L1.4XB1.1XH0.4 (mm)/L0.055XB0.043XH0.016 (inch)	85 Cel	29 dB	32500 kHz	PLASTIC	-30 Cel		Gold (Au) - with Nickel (Ni) barrier		.4 mm	1.1	2.6 dB		881.5 MHz	e4	50 OHM	1.4 mm
B39731B5328U410	TDK	SAW FILTER		1		50 OHM		SURFACE MOUNT	6		L3.0XB3.0XH1.1 (mm)/L0.118XB0.118XH0.043 (inch)	85 Cel				-40 Cel				1.1 mm	3.0	3.5 dB		725.5 MHz		50 OHM	3 mm
B39162B4310P810	TDK	SAW FILTER		1	AEC-Q200	50 OHM		SURFACE MOUNT	5	SAW Filters	L1.4XB1.1XH0.4 (mm)/L0.055XB0.043XH0.016 (inch)	85 Cel			PLASTIC	-40 Cel		Gold (Au)		.4 mm	1.1	1.9 dB		1588.655 MHz	e4	50 OHM	1.4 mm
B39162B4348P810	TDK	SAW FILTER		1		50 OHM//8.2 nH		SURFACE MOUNT	5		L1.4XB1.1XH0.4 (mm)/L0.055XB0.043XH0.016 (inch)	105 Cel				-40 Cel				.4 mm	1.1	1.3 dB	AEC-Q200	1582.47 MHz		50 OHM	1.4 mm

SAW Filters

SAW (Surface Acoustic Wave) filters are a type of electronic filter that operates on the principle of acoustic waves propagating on the surface of a piezoelectric material. These filters are widely used in radio frequency (RF) and microwave communication systems to suppress unwanted frequencies and improve signal quality.

The SAW filter consists of a piezoelectric substrate, typically made of quartz, onto which a set of interdigitated electrodes are deposited. The input signal is coupled to the SAW filter through the transducer electrodes, which convert the electrical signal to an acoustic wave. The acoustic wave then travels through the substrate, where it is selectively filtered by the frequency-dependent response of the substrate material, before being converted back to an electrical signal by the output transducer electrodes.

One of the key advantages of SAW filters is their high level of selectivity, which allows them to provide superior filtering performance compared to other types of filters. SAW filters can be designed to have very narrow bandwidths, which makes them ideal for applications that require high-frequency stability and low phase noise. Additionally, SAW filters are highly reliable and can operate over a wide temperature range, making them suitable for use in harsh environments.

SAW filters are used in a wide range of applications, including cellular communications, satellite communications, wireless LANs, and radio and television broadcasting. They are also used in industrial and medical applications where high-frequency stability is required. Overall, SAW filters provide a reliable and effective solution for improving the performance of RF and microwave communication systems.