THROUGH-HOLE Data Bus Terminators 66

  1. Home
  2. Data Bus Terminators
Manufacturers
    • Analog Devices
    • Diodes Incorporated
    • Koa Speer Electronics
    • Maxim Integrated
    • NXP Semiconductors
    • National Semiconductor
    • Onsemi
    • STMicroelectronics
    • Texas Instruments
Interface IC Type
    • BTL TERMINATOR
    • BUS TERMINATOR SUPPORT CIRCUIT
    • DIODE BUS TERMINATION ARRAY
    • OTHER TERMINATOR
    • SCSI BUS TERMINATOR
Temperature Grade
    • AUTOMOTIVE
    • COMMERCIAL
    • INDUSTRIAL
    • MILITARY
    • OTHER
Terminal Form (1)
    • THROUGH-HOLE
    • GULL WING
    • J BEND
    • NO LEAD
No. of Terminals
    • 10
    • 14
    • 16
    • 2
    • 20
    • 24
    • 28
    • 3
    • 32
    • 36
    • 38
    • 4
    • 44
    • 48
    • 5
    • 56
    • 6
    • 64
    • 8
    • 80
Package Code
    • DIE
    • DIP
    • HLSOP
    • HSON
    • HTSSOP
    • HVQCCN
    • HVSON
    • LFQFP
    • LQFP
    • LSSOP
    • QCCJ
    • QFP
    • SIP
    • SOP
    • SSOP
    • TO-220
    • TO-252
    • TO-263
    • TSSOP
    • VSSOP
    • ZIP
Package Shape
    • RECTANGULAR
    • SQUARE
Package Body Material
    • CERAMIC, GLASS-SEALED
    • CERAMIC, METAL-SEALED COFIRED
    • PLASTIC/EPOXY
    • UNSPECIFIED
Surface Mount
    • NO
    • YES
Maximum Supply Voltage
    • 15 V
    • 18 V
    • 2.95 V
    • 3.5 V
    • 3.6 V
    • 5.25 V
    • 5.3 V
    • 5.5 V
    • 6 V
    • 7 V
No. of Functions
    • 1
    • 2
Technology
    • BICMOS
    • BIPOLAR
    • CMOS
    • ECL
    • HYBRID
    • MOS
Screening Level
    • AEC-Q100
No. of Bits
    • 10
    • 12
    • 16
    • 4
    • 8
No. of Signal Lines
    • 1
    • 10
    • 12
    • 14
    • 15
    • 16
    • 17
    • 18
    • 2
    • 27
    • 32
    • 4
    • 6
    • 8
    • 9
Maximum Supply Current
    • .04 mA
    • 1 mA
    • 218 mA
    • 25 mA
    • 250 mA
    • 35 mA
    • 5.9 mA
    • 750 mA
    • 8 mA
Nominal Supply Voltage
    • 2.5 V
    • 2.85 V
    • 3.3 V
    • 4.25 V
    • 4.75 V
    • 5 V
Maximum Supply Voltage-1
    • -5.25 V
    • 5.25 V
    • 5.5 V
Power Supplies (V)
    • +-5
    • 2.9
    • 3.3
    • 3.5/5.5
    • 3.8/5.25
    • 3.9/5.25
    • 3/5
    • 3/5,5
    • 4.75
    • 5
    • 5/15
Nominal Negative Supply Voltage
    • -5 V
Package Style (Meter)
    • CHIP CARRIER
    • CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE
    • FLANGE MOUNT
    • FLATPACK
    • FLATPACK, LOW PROFILE
    • FLATPACK, LOW PROFILE, FINE PITCH
    • IN-LINE
    • SMALL OUTLINE
    • SMALL OUTLINE, HEAT SINK/SLUG
    • SMALL OUTLINE, HEAT SINK/SLUG, LOW PROFILE
    • SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH
    • SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE
    • SMALL OUTLINE, LOW PROFILE, SHRINK PITCH
    • SMALL OUTLINE, SHRINK PITCH
    • SMALL OUTLINE, THIN PROFILE, SHRINK PITCH
    • SMALL OUTLINE, VERY THIN PROFILE, SHRINK PITCH
    • UNCASED CHIP
Package Equivalence Code
    • DIP14,.3
    • DIP16,.3
    • DIP24,.6
    • LDCC28,.5SQ
    • QFP32,.35SQ,32
    • QFP48,.35SQ,20
    • QFP64,.47SQ,20
    • QFP80,.55SQ,20
    • SIP5(UNSEC)
    • SOP14,.25
    • SOP14,.3
    • SOP16,.25
    • SOP16,.4
    • SOP20,.3
    • SOP20,.4
    • SOP24,.3
    • SOP24,.4
    • SOP28,.4
    • SOP36,.4,32
    • SOP44,.4,32
    • SOT-223
    • SSOP20,.3
    • SSOP24,.3
    • SSOP28,.25
    • SSOP28,.3
    • TO-236
    • TSOP5/6,.11,37
    • TSSOP14,.25
    • TSSOP20,.25
    • TSSOP24,.25
    • TSSOP28,.25
    • TSSOP56,.3,20
    • TSSOP6,.08
    • ZIP16,.1
    • ZIP16,.11
Minimum Supply Voltage-1
    • -4.75 V
    • 4.5 V
    • 4.75 V
Sub-Category
    • Bus Terminators
Minimum Supply Voltage
    • 1.6 V
    • 2.2 V
    • 2.375 V
    • 2.7 V
    • 2.75 V
    • 3 V
    • 3.135 V
    • 3.5 V
    • 3.8 V
    • 3.9 V
    • 4 V
    • 4.25 V
    • 4.5 V
    • 4.7 V
    • 4.75 V
Terminal Pitch
    • .5 mm
    • .635 mm
    • .65 mm
    • .8 mm
    • .95 mm
    • 1.27 mm
    • 1.7 mm
    • 2.29 mm
    • 2.3 mm
    • 2.54 mm
Maximum Operating Temperature
    • 125 Cel
    • 155 Cel
    • 70 Cel
    • 85 Cel
Nominal Supply Voltage-1
    • -5 V
    • 15 V
    • 5 V
Minimum Operating Temperature
    • -40 Cel
    • -55 Cel
    • 0 Cel
Terminal Finish
    • MATTE TIN
    • Matte Tin (Sn)
    • Matte Tin (Sn) - annealed
    • NICKEL PALLADIUM GOLD
    • Nickel/Palladium/Gold (Ni/Pd/Au)
    • Nickel/Palladium/Gold/Silver (Ni/Pd/Au/Ag)
    • TIN
    • TIN LEAD
    • Tin/Lead (Sn/Pb)
    • Tin/Lead (Sn85Pb15)
Terminal Position
    • DUAL
    • QUAD
    • SINGLE
    • UPPER
    • ZIG-ZAG
JESD-30 Code
    • R-CDIP-T16
    • R-GDIP-T14
    • R-GDIP-T16
    • R-GDIP-T24
    • R-PDIP-T14
    • R-PDIP-T16
    • R-PDIP-T20
    • R-PDIP-T24
    • R-PDIP-T8
    • R-PDSO-G14
    • R-PDSO-G16
    • R-PDSO-G20
    • R-PDSO-G24
    • R-PDSO-G28
    • R-PDSO-G36
    • R-PDSO-G4
    • R-PDSO-G44
    • R-PDSO-G5
    • R-PDSO-G56
    • R-PDSO-G6
    • R-PDSO-G8
    • R-PSFM-T5
    • R-PSIP-T10
    • R-PSSO-G2
    • R-PSSO-G5
    • R-PZIP-T16
    • R-XQCC-N38
    • R-XUUC-N14
    • S-PDSO-N10
    • S-PQCC-J28
    • S-PQCC-N10
    • S-PQFP-G32
    • S-PQFP-G48
    • S-PQFP-G64
    • S-PQFP-G80
Moisture Sensitivity Level (MSL)
    • 1
    • 2
    • 3
Maximum Seated Height
    • .6 mm
    • 1 mm
    • 1.1 mm
    • 1.2 mm
    • 1.45 mm
    • 1.6 mm
    • 1.68 mm
    • 1.7 mm
    • 1.73 mm
    • 1.75 mm
    • 1.8 mm
    • 1.99 mm
    • 2 mm
    • 2.05 mm
    • 2.38 mm
    • 2.64 mm
    • 2.65 mm
    • 2.67 mm
    • 2.68 mm
    • 4.32 mm
    • 4.57 mm
    • 4.82 mm
    • 4.91 mm
    • 5.08 mm
    • 5.33 mm
    • 5.72 mm
    • 7.4 mm
    • 7.5 mm
Width
    • 1.2 mm
    • 1.25 mm
    • 1.625 mm
    • 10 mm
    • 11.505 mm
    • 11.5062 mm
    • 12 mm
    • 15.24 mm
    • 2.8 mm
    • 3 mm
    • 3.5 mm
    • 3.9 mm
    • 3.91 mm
    • 3.9116 mm
    • 4.4 mm
    • 5.29 mm
    • 5.3 mm
    • 5.99 mm
    • 6.1 mm
    • 6.16 mm
    • 7 mm
    • 7.495 mm
    • 7.5 mm
    • 7.62 mm
    • 8 mm
    • 8.41 mm
Qualification
    • Not Qualified
Additional Features
    • SINGLE ENDED TERMINATION REQUIRES 4V TO 5.5V SUPPLY
    • SINGLE ENDED TERMINATION REQUIRES 5V SUPPLY
Differential Output
    • NO
    • YES
JESD-609 Code
    • e0
    • e3
    • e4
Maximum Time At Peak Reflow Temperature (s)
    • 10
    • 20
    • 30
    • NOT SPECIFIED
Peak Reflow Temperature (C)
    • 235
    • 240
    • 245
    • 260
    • NOT SPECIFIED
Length
    • 1.6 mm
    • 10 mm
    • 10.18 mm
    • 10.2 mm
    • 10.285 mm
    • 10.3 mm
    • 11.505 mm
    • 11.5062 mm
    • 12 mm
    • 12.6 mm
    • 12.75 mm
    • 12.8 mm
    • 14 mm
    • 15.375 mm
    • 15.385 mm
    • 15.4 mm
    • 17.9 mm
    • 17.905 mm
    • 17.925 mm
    • 19.05 mm
    • 19.3 mm
    • 19.305 mm
    • 19.5 mm
    • 19.56 mm
    • 2 mm
    • 2.9 mm
    • 2.925 mm
    • 25.4 mm
    • 25.91 mm
    • 3 mm
    • 30.985 mm
    • 31.75 mm
    • 4.89 mm
    • 4.9 mm
    • 5 mm
    • 6.5 mm
    • 6.54 mm
    • 7 mm
    • 7.2 mm
    • 7.55 mm
    • 7.8 mm
    • 8.2 mm
    • 8.65 mm
    • 8.66 mm
    • 8.89 mm
    • 9.425 mm
    • 9.7 mm
    • 9.89 mm
    • 9.9 mm
Nominal Pull Up Resistance
    • 10 ohm
    • 100 ohm
    • 104 ohm
    • 105 ohm
    • 110 ohm
    • 118 ohm
    • 120 ohm
    • 125 ohm
    • 150 ohm
    • 1500 ohm
    • 153 ohm
    • 237 ohm
    • 33 ohm
    • 330 ohm
    • 4700 ohm
    • 50 ohm
    • 52 ohm
    • 55 ohm
    • 56 ohm
    • 75 ohm
Reset All
Part RoHS Manufacturer Interface IC Type Temperature Grade Terminal Form No. of Terminals Package Code Package Shape Package Body Material Surface Mount Maximum Supply Voltage No. of Functions Technology Screening Level No. of Bits No. of Signal Lines Maximum Supply Current Nominal Supply Voltage Maximum Supply Voltage-1 Power Supplies (V) Nominal Negative Supply Voltage Package Style (Meter) Package Equivalence Code Minimum Supply Voltage-1 Sub-Category Minimum Supply Voltage Terminal Pitch Maximum Operating Temperature Nominal Supply Voltage-1 Minimum Operating Temperature Terminal Finish Terminal Position JESD-30 Code Moisture Sensitivity Level (MSL) Maximum Seated Height Width Qualification Additional Features Differential Output JESD-609 Code Maximum Time At Peak Reflow Temperature (s) Peak Reflow Temperature (C) Length Nominal Pull Up Resistance

UC5603J

Texas Instruments

SCSI BUS TERMINATOR

COMMERCIAL

THROUGH-HOLE

16

DIP

RECTANGULAR

CERAMIC, GLASS-SEALED

NO

5.25 V

1

BIPOLAR

9

4.75 V

5

IN-LINE

DIP16,.3

Bus Terminators

3.8 V

2.54 mm

70 Cel

0 Cel

DUAL

R-GDIP-T16

5.08 mm

7.62 mm

Not Qualified

NO

NOT SPECIFIED

NOT SPECIFIED

19.56 mm

110 ohm

UC5604N

Texas Instruments

SCSI BUS TERMINATOR

COMMERCIAL

THROUGH-HOLE

16

DIP

RECTANGULAR

PLASTIC/EPOXY

NO

5.25 V

1

BIPOLAR

9

4.75 V

5

IN-LINE

DIP16,.3

Bus Terminators

3.8 V

2.54 mm

70 Cel

0 Cel

DUAL

R-PDIP-T16

5.33 mm

7.62 mm

Not Qualified

NO

NOT SPECIFIED

NOT SPECIFIED

19.3 mm

110 ohm

UCC5618N

Texas Instruments

SCSI BUS TERMINATOR

COMMERCIAL

THROUGH-HOLE

24

DIP

RECTANGULAR

PLASTIC/EPOXY

NO

5.25 V

1

BICMOS

18

4.75 V

4.75

IN-LINE

DIP24,.6

Bus Terminators

4 V

2.54 mm

70 Cel

0 Cel

DUAL

R-PDIP-T24

5.33 mm

15.24 mm

Not Qualified

NO

31.75 mm

110 ohm

UCC5615J

Texas Instruments

SCSI BUS TERMINATOR

COMMERCIAL

THROUGH-HOLE

16

DIP

RECTANGULAR

CERAMIC, METAL-SEALED COFIRED

NO

5.25 V

1

BICMOS

9

4.75 V

5

IN-LINE

DIP16,.3

Bus Terminators

4 V

2.54 mm

70 Cel

0 Cel

DUAL

R-CDIP-T16

5.08 mm

7.62 mm

Not Qualified

NO

NOT SPECIFIED

NOT SPECIFIED

110 ohm

UCC5614Z

Texas Instruments

SCSI BUS TERMINATOR

COMMERCIAL

THROUGH-HOLE

16

ZIP

RECTANGULAR

PLASTIC/EPOXY

NO

5.25 V

1

BICMOS

9

3.3 V

3/5

IN-LINE

ZIP16,.11

Bus Terminators

2.7 V

1.27 mm

70 Cel

0 Cel

ZIG-ZAG

R-PZIP-T16

7.5 mm

2.8 mm

Not Qualified

NO

NOT SPECIFIED

NOT SPECIFIED

19.5 mm

110 ohm

SN74S1052NE4

Texas Instruments

DIODE BUS TERMINATION ARRAY

COMMERCIAL

THROUGH-HOLE

20

DIP

RECTANGULAR

PLASTIC/EPOXY

NO

1

16

5 V

IN-LINE

2.54 mm

70 Cel

0 Cel

NICKEL PALLADIUM GOLD

DUAL

R-PDIP-T20

5.08 mm

7.62 mm

Not Qualified

NO

e4

25.4 mm

SN74S1052N

Texas Instruments

DIODE BUS TERMINATION ARRAY

COMMERCIAL

THROUGH-HOLE

20

DIP

RECTANGULAR

PLASTIC/EPOXY

NO

1

16

5 V

IN-LINE

2.54 mm

70 Cel

0 Cel

NICKEL PALLADIUM GOLD

DUAL

R-PDIP-T20

5.08 mm

7.62 mm

Not Qualified

NO

e4

25.4 mm

SN74S1053N

Texas Instruments

DIODE BUS TERMINATION ARRAY

COMMERCIAL

THROUGH-HOLE

20

DIP

RECTANGULAR

PLASTIC/EPOXY

NO

5.25 V

1

16

16

5 V

IN-LINE

4.75 V

2.54 mm

70 Cel

0 Cel

NICKEL PALLADIUM GOLD

DUAL

R-PDIP-T20

5.08 mm

7.62 mm

Not Qualified

NO

e4

25.4 mm

SN74F1056SC

Texas Instruments

DIODE BUS TERMINATION ARRAY

COMMERCIAL

THROUGH-HOLE

10

SIP

RECTANGULAR

PLASTIC/EPOXY

NO

1

8

IN-LINE

2.54 mm

70 Cel

0 Cel

SINGLE

R-PSIP-T10

7.4 mm

Not Qualified

NO

SN74S1050N

Texas Instruments

DIODE BUS TERMINATION ARRAY

COMMERCIAL

THROUGH-HOLE

16

DIP

RECTANGULAR

PLASTIC/EPOXY

NO

1

12

5 V

IN-LINE

2.54 mm

70 Cel

0 Cel

DUAL

R-PDIP-T16

5.08 mm

7.62 mm

Not Qualified

NO

NOT SPECIFIED

NOT SPECIFIED

19.305 mm

SN74S1051NE4

Texas Instruments

DIODE BUS TERMINATION ARRAY

COMMERCIAL

THROUGH-HOLE

16

DIP

RECTANGULAR

PLASTIC/EPOXY

NO

1

12

5 V

IN-LINE

2.54 mm

70 Cel

0 Cel

NICKEL PALLADIUM GOLD

DUAL

R-PDIP-T16

5.08 mm

7.62 mm

Not Qualified

NO

e4

19.305 mm

SN74S1053NE4

Texas Instruments

DIODE BUS TERMINATION ARRAY

COMMERCIAL

THROUGH-HOLE

20

DIP

RECTANGULAR

PLASTIC/EPOXY

NO

5.25 V

1

16

16

5 V

IN-LINE

4.75 V

2.54 mm

70 Cel

0 Cel

NICKEL PALLADIUM GOLD

DUAL

R-PDIP-T20

5.08 mm

7.62 mm

Not Qualified

NO

e4

25.4 mm

SN74S1056SC

Texas Instruments

DIODE BUS TERMINATION ARRAY

COMMERCIAL

THROUGH-HOLE

10

SIP

RECTANGULAR

PLASTIC/EPOXY

NO

1

8

5 V

IN-LINE

2.54 mm

70 Cel

0 Cel

SINGLE

R-PSIP-T10

7.4 mm

Not Qualified

NO

NOT SPECIFIED

NOT SPECIFIED

SN74S1051N

Texas Instruments

DIODE BUS TERMINATION ARRAY

COMMERCIAL

THROUGH-HOLE

16

DIP

RECTANGULAR

PLASTIC/EPOXY

NO

5.25 V

1

12

12

5 V

IN-LINE

4.75 V

2.54 mm

70 Cel

0 Cel

NICKEL PALLADIUM GOLD

DUAL

R-PDIP-T16

5.08 mm

7.62 mm

Not Qualified

NO

e4

19.305 mm

SN74S1050NE4

Texas Instruments

DIODE BUS TERMINATION ARRAY

COMMERCIAL

THROUGH-HOLE

16

DIP

RECTANGULAR

PLASTIC/EPOXY

NO

1

12

5 V

IN-LINE

2.54 mm

70 Cel

0 Cel

DUAL

R-PDIP-T16

5.08 mm

7.62 mm

Not Qualified

NO

NOT SPECIFIED

NOT SPECIFIED

19.305 mm

SDA32D20

Diodes Incorporated

DIODE BUS TERMINATION ARRAY

THROUGH-HOLE

20

DIP

RECTANGULAR

PLASTIC/EPOXY

NO

IN-LINE

2.54 mm

TIN LEAD

DUAL

R-PDIP-T20

4.32 mm

7.62 mm

Not Qualified

e0

10

235

25.91 mm

SDA24D16

Diodes Incorporated

DIODE BUS TERMINATION ARRAY

THROUGH-HOLE

16

DIP

RECTANGULAR

PLASTIC/EPOXY

NO

IN-LINE

2.54 mm

TIN LEAD

DUAL

R-PDIP-T16

1

4.32 mm

7.62 mm

Not Qualified

e0

10

235

19.05 mm

SDA12D8

Diodes Incorporated

DIODE BUS TERMINATION ARRAY

THROUGH-HOLE

8

DIP

RECTANGULAR

PLASTIC/EPOXY

NO

IN-LINE

2.54 mm

TIN LEAD

DUAL

R-PDIP-T8

4.32 mm

7.62 mm

Not Qualified

e0

10

235

8.89 mm

Data Bus Terminators

Data bus terminators are electronic components used to minimize signal reflections on a data bus. A data bus is a communication pathway used to transfer data between multiple devices in a computer system or network. Signal reflections can cause errors in data transmission and affect signal quality. Data bus terminators are designed to absorb or reflect these signal reflections, ensuring that the signal remains clear and stable.

Terminators can be classified into several types based on their characteristics and applications. These include parallel bus terminators for parallel data buses, serial bus terminators for serial data buses, and network bus terminators for network data buses such as Ethernet or CAN. Terminators can consist of a resistor, a network of resistors, or a combination of resistors and capacitors to match the impedance of the bus and reduce signal reflections.

Data bus terminators are essential components of data communication systems. They play a critical role in ensuring accurate and reliable signal transmission, particularly in high-speed and high-bandwidth data communication applications.