LINE RECEIVER Line Drivers & Receivers 2,400+

Reset All

Part	Manufacturer	Interface IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	Maximum Supply Voltage	No. of Functions	Technology	Screening Level	Interface Standard	Maximum Supply Current	Input Characteristics	Nominal Supply Voltage	Power Supplies (V)	Package Style (Meter)	Package Equivalence Code	Sub-Category	Maximum High Level Input Current	Minimum Supply Voltage	Terminal Pitch	Maximum Operating Temperature	Output Characteristics	Minimum Operating Temperature	Terminal Finish	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Seated Height	Width	Qualification	Maximum Output Low Current	Output Polarity	Receiver No. of Bits	Additional Features	Differential Output	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Minimum Out Swing	Maximum Receive Delay
MAX96708GTJ/V+T	Analog Devices	LINE RECEIVER																										Matte Tin (Sn) - annealed			1									e3	30	260
MAX9278GTM+T	Analog Devices	LINE RECEIVER	INDUSTRIAL	NO LEAD	48	HQCCN	SQUARE	UNSPECIFIED	YES	3.6 V	1	CMOS		I2C	.3 mA	DIFFERENTIAL	3.3 V		CHIP CARRIER, HEAT SINK/SLUG	LCC48,.28SQ,20			3 V	.5 mm	105 Cel	3-STATE	-40 Cel	Matte Tin (Sn) - annealed	QUAD	S-XQCC-N48	1	.8 mm	7 mm	Not Qualified		TRUE	1		YES	e3	30	260	7 mm
MAX9282AGTM/V+T	Analog Devices	LINE RECEIVER																										Matte Tin (Sn) - annealed			1									e3	30	260
MAX9282AGTM+T	Analog Devices	LINE RECEIVER																										Matte Tin (Sn) - annealed			1									e3	30	260
MAX9248ECM/V+	Analog Devices	LINE RECEIVER	INDUSTRIAL	GULL WING	48	LFQFP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1	CMOS	AEC-Q100	GENERAL PURPOSE	120 mA	STANDARD	3.3 V	3.3	FLATPACK, LOW PROFILE, FINE PITCH	QFP48,.35SQ,20	Line Driver or Receivers		3 V	.5 mm	85 Cel		-40 Cel	Matte Tin (Sn) - annealed	QUAD	S-PQFP-G48	1	1.6 mm	7 mm	Not Qualified			1	ALSO OPEARTES FROM 1.8 TO 3.3 SUPLY	YES	e3	30	260	7 mm		0 ns
MAX9282GTM+	Analog Devices	LINE RECEIVER	INDUSTRIAL	NO LEAD	48	HQCCN	SQUARE	UNSPECIFIED	YES	3.6 V	1	CMOS		I2C	.3 mA	DIFFERENTIAL	3.3 V		CHIP CARRIER, HEAT SINK/SLUG	LCC48,.28SQ,20			3 V	.5 mm	105 Cel	3-STATE	-40 Cel	Matte Tin (Sn) - annealed	QUAD	S-XQCC-N48	1	.8 mm	7 mm			TRUE	1		YES	e3	30	260	7 mm
MAX9278AGTM+T	Analog Devices	LINE RECEIVER																										Matte Tin (Sn) - annealed			1									e3	30	260
MAX9278AGTM/V+	Analog Devices	LINE RECEIVER																										Matte Tin (Sn) - annealed			1									e3	30	260
MAX9250ETM+	Analog Devices	LINE RECEIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE	UNSPECIFIED	YES	3.6 V	1	CMOS		GENERAL PURPOSE	120 mA	STANDARD	3.3 V	3.3	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC48,.24SQ,16	Line Driver or Receivers		3 V	.4 mm	85 Cel		-40 Cel	Matte Tin (Sn) - annealed	QUAD	S-XQCC-N48	1	.8 mm	6 mm	Not Qualified			1		YES	e3	30	260	6 mm		0 ns
MAX9218ETM+	Analog Devices	LINE RECEIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE	UNSPECIFIED	YES	3.6 V	1	CMOS		GENERAL PURPOSE	70 mA	DIFFERENTIAL	3.3 V	3.3	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC48,.24SQ,16	Line Driver or Receivers		3 V	.4 mm	85 Cel		-40 Cel	Matte Tin (Sn) - annealed	QUAD	S-XQCC-N48	1	.8 mm	6 mm	Not Qualified			1			e3	30	260	6 mm		0 ns
MAX9206EAI+	Analog Devices	LINE RECEIVER	INDUSTRIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	10	CMOS		GENERAL PURPOSE	75 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.3	SMALL OUTLINE, SHRINK PITCH	SSOP28,.3	Line Driver or Receivers		3 V	.65 mm	85 Cel		-40 Cel	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G28	1	1.99 mm	5.29 mm	Not Qualified			10			e3	30	260	10.2 mm		0 ns
MAX9179ETE+	Analog Devices	LINE RECEIVER	INDUSTRIAL	NO LEAD	16	HVQCCN	SQUARE	UNSPECIFIED	YES	3.6 V	4	CMOS		EIA-644; TIA-644		DIFFERENTIAL	3.3 V		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE				3 V	.65 mm	85 Cel		-40 Cel	Matte Tin (Sn) - annealed	QUAD	S-XQCC-N16	1	.8 mm	4 mm	Not Qualified			4			e3	30	260	4 mm		4.6 ns
MAX9240AGTM/V+	Analog Devices	LINE RECEIVER																										Matte Tin (Sn) - annealed			1									e3	30	260
MAX9236EUM+T	Analog Devices	LINE RECEIVER	INDUSTRIAL	GULL WING	48	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4	CMOS		EIA-644; TIA-644	98 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.3,3.3/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP48,.3,20	Line Driver or Receivers		3 V	.5 mm	85 Cel		-40 Cel	TIN LEAD	DUAL	R-PDSO-G48	3	1.1 mm	6.1 mm	Not Qualified			4			e0			12.5 mm		0 ns
MAX9250GCM+	Analog Devices	LINE RECEIVER	INDUSTRIAL	GULL WING	48	LFQFP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1	CMOS		GENERAL PURPOSE	89 mA	STANDARD	3.3 V	3.3	FLATPACK, LOW PROFILE, FINE PITCH	QFP48,.35SQ,20	Line Driver or Receivers		3 V	.5 mm	105 Cel		-40 Cel	Matte Tin (Sn) - annealed	QUAD	S-PQFP-G48	1	1.6 mm	7 mm	Not Qualified			1	ALSO OPEARTES FROM 1.8 TO 3.3 SUPLY	YES	e3	30	260	7 mm		0 ns
MAX9260GCB/V+TWGG4	Analog Devices	LINE RECEIVER																										Matte Tin (Sn) - annealed			3									e3	30	260
ADM5180JP	Analog Devices	LINE RECEIVER	COMMERCIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	5.25 V	1	BICMOS		EIA-232-E; V.10; V.11; V.28; X.26; X.27; EIA-422-A; EIA-423-A	5 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V	5	CHIP CARRIER	LDCC28,.5SQ	Line Driver or Receivers		4.75 V	1.27 mm	70 Cel	TOTEM-POLE	0 Cel	TIN LEAD	QUAD	S-PQCC-J28	1	4.57 mm	11.505 mm	Not Qualified	4 Amp	TRUE	8		NO	e0		225	11.505 mm		550 ns
ADM5180AN	Analog Devices	LINE RECEIVER	INDUSTRIAL	THROUGH-HOLE	28	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.25 V	1	BICMOS		EIA-232-E; V.10; V.11; V.28; X.26; X.27; EIA-422-A; EIA-423-A	5 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V	5	IN-LINE	DIP28,.6	Line Driver or Receivers		4.75 V	2.54 mm	85 Cel	TOTEM-POLE	-40 Cel	TIN LEAD	DUAL	R-PDIP-T28		6.35 mm	15.24 mm	Not Qualified	4 Amp	TRUE	8		NO	e0			37.4 mm		550 ns
ADM5180APZ	Analog Devices	LINE RECEIVER	INDUSTRIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	5.25 V	1	BICMOS		EIA-232-E; V.10; V.11; V.28; X.26; X.27; EIA-422-A; EIA-423-A	5 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		CHIP CARRIER				4.75 V	1.27 mm	85 Cel	TOTEM-POLE	-40 Cel	MATTE TIN	QUAD	S-PQCC-J28	3	4.57 mm	11.505 mm	Not Qualified		TRUE	8		NO	e3		260	11.505 mm		550 ns
ADM5180AP-REEL	Analog Devices	LINE RECEIVER	INDUSTRIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	5.25 V	1	BICMOS		EIA-232-E; V.10; V.11; V.28; X.26; X.27; EIA-422-A; EIA-423-A	5 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V	5	CHIP CARRIER	LDCC28,.5SQ	Line Driver or Receivers		4.75 V	1.27 mm	85 Cel	TOTEM-POLE	-40 Cel	TIN LEAD	QUAD	S-PQCC-J28	1	4.57 mm	11.505 mm	Not Qualified	4 Amp	TRUE	8		NO	e0		225	11.505 mm		550 ns
ADM5180ANZ	Analog Devices	LINE RECEIVER	INDUSTRIAL	THROUGH-HOLE	28	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.25 V	1	BICMOS		EIA-232-E; V.10; V.11; V.28; X.26; X.27; EIA-422-A; EIA-423-A	5 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		IN-LINE				4.75 V	2.54 mm	85 Cel	TOTEM-POLE	-40 Cel	MATTE TIN	DUAL	R-PDIP-T28		6.35 mm	15.24 mm	Not Qualified		TRUE	8		NO	e3			37.4 mm		550 ns
ADM5180JPZ	Analog Devices	LINE RECEIVER	COMMERCIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	5.25 V	1	BICMOS		EIA-232-E; V.10; V.11; V.28; X.26; X.27; EIA-422-A; EIA-423-A	5 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		CHIP CARRIER				4.75 V	1.27 mm	70 Cel	TOTEM-POLE	0 Cel	MATTE TIN	QUAD	S-PQCC-J28	3	4.57 mm	11.505 mm	Not Qualified		TRUE	8		NO	e3		260	11.505 mm		550 ns
MAX9260GCB/V+WGG4	Analog Devices	LINE RECEIVER																										Matte Tin (Sn) - annealed			3									e3	30	260
MAX9248GCM+T	Analog Devices	LINE RECEIVER	INDUSTRIAL	GULL WING	48	QFP	SQUARE	PLASTIC/EPOXY	YES			CMOS			120 mA		3.3 V	3.3	FLATPACK	QFP48,.35SQ,20	Line Driver or Receivers			.5 mm	105 Cel		-40 Cel	Matte Tin (Sn) - annealed	QUAD	S-PQFP-G48	1			Not Qualified						e3	30	260
MAX9248GCM+	Analog Devices	LINE RECEIVER	INDUSTRIAL	GULL WING	48	LFQFP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1	CMOS		GENERAL PURPOSE	120 mA	STANDARD	3.3 V	3.3	FLATPACK, LOW PROFILE, FINE PITCH	QFP48,.35SQ,20	Line Driver or Receivers		3 V	.5 mm	105 Cel		-40 Cel	Matte Tin (Sn) - annealed	QUAD	S-PQFP-G48	1	1.6 mm	7 mm	Not Qualified			1	ALSO OPEARTES FROM 1.8 TO 3.3 SUPLY	YES	e3	30	260	7 mm		0 ns
MAX9258AGCM/V+TW	Analog Devices	LINE RECEIVER																										Matte Tin (Sn) - annealed			1									e3	30	260
MAX96706GTJ+T	Analog Devices	LINE RECEIVER		NO LEAD	32	HVQCCN	SQUARE	UNSPECIFIED	YES	1.9 V	1		AEC-Q100	ISO 10605		DIFFERENTIAL	1.8 V		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC32,.2SQ,20			1.7 V	.5 mm	115 Cel	OPEN-DRAIN	-40 Cel	Matte Tin (Sn) - annealed	QUAD	S-XQCC-N32	1	.8 mm	5 mm		2 Amp		1		NO	e3	30	260	5 mm
MAX9282GTM+T	Analog Devices	LINE RECEIVER	INDUSTRIAL	NO LEAD	48	HQCCN	SQUARE	UNSPECIFIED	YES	3.6 V	1	CMOS		I2C	.3 mA	DIFFERENTIAL	3.3 V		CHIP CARRIER, HEAT SINK/SLUG	LCC48,.28SQ,20			3 V	.5 mm	105 Cel	3-STATE	-40 Cel	Matte Tin (Sn) - annealed	QUAD	S-XQCC-N48	1	.8 mm	7 mm	Not Qualified		TRUE	1		YES	e3	30	260	7 mm
MAX9268GCM/V+TGG5	Analog Devices	LINE RECEIVER	INDUSTRIAL	GULL WING	48	HTFQFP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1	CMOS		ISO 10605	280 mA	DIFFERENTIAL	3.3 V		FLATPACK, HEAT SINK/SLUG, THIN PROFILE, FINE PITCH	TQFP48,.35SQ		.00001 Amp	3 V	.5 mm	105 Cel		-40 Cel	Matte Tin (Sn) - annealed	QUAD	S-PQFP-G48	3	1.2 mm	7 mm		2 Amp	COMPLEMENTARY	1		NO	e3	30	260	7 mm	.25 V
MAX9278AGGM/VY+	Analog Devices	LINE RECEIVER																																							NOT SPECIFIED	NOT SPECIFIED
MAX9248GCM/V+TGB	Analog Devices	LINE RECEIVER																													1
MAX9172ETA	Analog Devices	LINE RECEIVER	INDUSTRIAL	NO LEAD	8	HVSON	SQUARE	UNSPECIFIED	YES	3.6 V	2	CMOS		EIA-644; TIA-644	9 mA	DIFFERENTIAL	3.3 V	3.3	SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE	SOLCC8,.12,25	Line Driver or Receivers		3 V	.65 mm	85 Cel		-40 Cel	TIN LEAD	DUAL	S-XDSO-N8	1	.8 mm	3 mm	Not Qualified	4 Amp		2			e0			3 mm		2.5 ns
MAX9240AGTM+	Analog Devices	LINE RECEIVER																										Matte Tin (Sn) - annealed			1									e3	30	260
MAX9208EAI+	Analog Devices	LINE RECEIVER	INDUSTRIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	10	CMOS		GENERAL PURPOSE	100 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.3	SMALL OUTLINE, SHRINK PITCH	SSOP28,.3	Line Driver or Receivers		3 V	.65 mm	85 Cel		-40 Cel	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G28	1	1.99 mm	5.29 mm	Not Qualified			10			e3	30	260	10.2 mm		0 ns
MAX9218ECM/V+	Analog Devices	LINE RECEIVER	INDUSTRIAL	GULL WING	48	LFQFP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1	CMOS	AEC-Q100	GENERAL PURPOSE	70 mA	DIFFERENTIAL	3.3 V	3.3	FLATPACK, LOW PROFILE, FINE PITCH	QFP48,.35SQ,20	Line Driver or Receivers		3 V	.5 mm	85 Cel		-40 Cel	Matte Tin (Sn) - annealed	QUAD	S-PQFP-G48	1	1.6 mm	7 mm	Not Qualified			1			e3	30	260	7 mm		0 ns
MAX9249GCM/V+	Analog Devices	LINE RECEIVER	INDUSTRIAL	GULL WING	48	HTFQFP	SQUARE	PLASTIC/EPOXY	YES	1.9 V	1	CMOS	AEC-Q100	ISO 10605	220 mA	DIFFERENTIAL SCHMITT TRIGGER	1.8 V	1.8	FLATPACK, HEAT SINK/SLUG, THIN PROFILE, FINE PITCH	TQFP48,.35SQ	Line Driver or Receivers		1.7 V	.5 mm	105 Cel		-40 Cel	Matte Tin (Sn) - annealed	QUAD	S-PQFP-G48	3	1.2 mm	7 mm	Not Qualified			1		YES	e3	30	260	7 mm		0 ns
MAX9206EAI+T	Analog Devices	LINE RECEIVER	INDUSTRIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1	CMOS		GENERAL PURPOSE	75 mA	DIFFERENTIAL	3.3 V	3.3	SMALL OUTLINE, SHRINK PITCH	SSOP28,.3	Line Driver or Receivers		3 V	.65 mm	85 Cel		-40 Cel	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G28	1	1.99 mm	5.29 mm	Not Qualified			1			e3	30	260	10.2 mm		0 ns
MAX9111EKA+	Analog Devices	LINE RECEIVER	INDUSTRIAL	GULL WING	8	LSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1	CMOS		EIA-644; TIA-644	6 mA	DIFFERENTIAL	3.3 V	3.3	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSSOP8,.1	Line Driver or Receivers		3 V	.65 mm	85 Cel		-40 Cel	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G8	1	1.45 mm	1.625 mm	Not Qualified	4 Amp		1		NO	e3	30	260	2.9 mm		2.5 ns
MAX9113ESA/V+	Analog Devices	LINE RECEIVER																																							NOT SPECIFIED	NOT SPECIFIED
MAX96724FGTN/V+	Analog Devices	LINE RECEIVER
MAX9272AGTM+	Analog Devices	LINE RECEIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE	UNSPECIFIED	YES	1.9 V	1	CMOS		ISO 10605		DIFFERENTIAL	1.8 V		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE				1.7 V	.5 mm	105 Cel		-40 Cel	Matte Tin (Sn) - annealed	QUAD	S-XQCC-N48	1	.8 mm	7 mm				1		NO	e3	30	260	7 mm
MAX9280AGTN/VY+	Analog Devices	LINE RECEIVER																																							30	260
MAX9218ECM/V+T	Analog Devices	LINE RECEIVER																										Matte Tin (Sn) - annealed			1									e3	30	260
MAX9248ECM/V+T	Analog Devices	LINE RECEIVER	INDUSTRIAL	GULL WING	48	QFP	SQUARE	PLASTIC/EPOXY	YES			CMOS	AEC-Q100		120 mA		3.3 V	3.3	FLATPACK	QFP48,.35SQ,20	Line Driver or Receivers			.5 mm	85 Cel		-40 Cel	Matte Tin (Sn) - annealed	QUAD	S-PQFP-G48	1			Not Qualified						e3	30	260
MAX9278AGTM/VY+T	Analog Devices	LINE RECEIVER																										Matte Tin (Sn) - annealed			1									e3	30	260
MAX9111ESA+T	Analog Devices	LINE RECEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1	CMOS		EIA-644; TIA-644	6 mA	DIFFERENTIAL	3.3 V	3.3	SMALL OUTLINE	SOP8,.25	Line Driver or Receivers		3 V	1.27 mm	85 Cel		-40 Cel	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified	4 Amp		1			e3	30	260	4.9 mm		2.5 ns
MAX9250ECM+T	Analog Devices	LINE RECEIVER	INDUSTRIAL	GULL WING	48	LFQFP	SQUARE	UNSPECIFIED	YES	3.6 V	1	CMOS		GENERAL PURPOSE	89 mA	STANDARD	3.3 V	3.3	FLATPACK, LOW PROFILE, FINE PITCH	QFP48,.35SQ,20	Line Driver or Receivers		3 V	.5 mm	85 Cel		-40 Cel	Matte Tin (Sn) - annealed	QUAD	S-XQFP-G48	1	1.6 mm	7 mm	Not Qualified			1		YES	e3	30	260	7 mm		0 ns
MAX9122EUE/GG8	Analog Devices	LINE RECEIVER

Line Drivers & Receivers

Line drivers and receivers are electronic components that are used to transmit and receive data signals over long distances. They are commonly used in industrial and commercial applications that require reliable and high-speed data transmission.

Line drivers are electronic components that amplify signals and provide the necessary voltage and current to drive the transmission line. They are used to ensure that the data signal maintains its integrity and strength as it travels through the transmission line.

Line receivers are electronic components that are used to receive the data signal and convert it back to a usable form. They typically include a differential amplifier and a threshold detector to ensure that the received signal is of sufficient quality and strength to be used by the receiving device.

Line drivers and receivers can be classified into several types based on their specific applications and characteristics. Some of the most common types of line drivers and receivers include RS-232, RS-422, and RS-485.