LINE TRANSCEIVER Line Drivers & Receivers 2,400+

Reset All

Part	Manufacturer	Interface IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	Maximum Supply Voltage	No. of Functions	Technology	Screening Level	Maximum Transmit Delay	Interface Standard	Maximum Supply Current	Input Characteristics	Nominal Supply Voltage	Maximum Supply Voltage-1	Power Supplies (V)	Package Style (Meter)	Package Equivalence Code	Minimum Supply Voltage-1	Sub-Category	Maximum High Level Input Current	Minimum Supply Voltage	Terminal Pitch	Maximum Operating Temperature	Nominal Supply Voltage-1	Output Characteristics	Minimum Operating Temperature	Driver No. of Bits	Terminal Finish	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Seated Height	Width	Qualification	Maximum Output Low Current	Output Polarity	Receiver No. of Bits	Additional Features	Differential Output	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Minimum Out Swing	Maximum Receive Delay
ADM485JRZ	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	1	BICMOS		15 ns	EIA-422; EIA-485	2.2 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5	SMALL OUTLINE	SOP8,.25		Line Driver or Receivers	.000001 Amp	4.75 V	1.27 mm	70 Cel			0 Cel	1	MATTE TIN	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified	4 Amp		1	1 RECEIVER ACTIVE UNDER SHUTDOWN; COMMON I/O; TRISTATABLE RECEIVERS	YES	e3		260	4.9 mm	1.5 V	30 ns
LTC1334ISW#PBF	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	28	SOP	RECTANGULAR	PLASTIC/EPOXY	YES		3	CMOS		4000 ns	EIA-232; EIA-422; EIA-485; EIA-562		DIFFERENTIAL SCHMITT TRIGGER	5 V			SMALL OUTLINE						1.27 mm	85 Cel			-40 Cel	3	MATTE TIN	DUAL	R-PDSO-G28	1	2.65 mm	7.5 mm	Not Qualified		COMPLEMENTARY	3	CONFIGURABLE INTERFACE STANDARDS	YES	e3	30	260	17.9 mm		6000 ns
LTC1387IG	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	20	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	1	CMOS		4000 ns	EIA-232; EIA-422; EIA-485; EIA-562		DIFFERENTIAL SCHMITT TRIGGER	5 V			SMALL OUTLINE, SHRINK PITCH					4.75 V	.65 mm	85 Cel			-40 Cel	1	TIN LEAD	DUAL	R-PDSO-G20	1	2 mm	5.3 mm	Not Qualified			1		YES	e0			7.2 mm		6000 ns
LTC2851IS8#PBF	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1			50 ns	EIA-485-A; TIA-485-A; EIA-422		DIFFERENTIAL SCHMITT TRIGGER	3.3 V			SMALL OUTLINE					3 V	1.27 mm	85 Cel			-40 Cel	1	MATTE TIN	DUAL	R-PDSO-G8	1	1.752 mm	3.899 mm	Not Qualified			1		YES	e3	30	260	4.9025 mm		70 ns
LTC2852CMS#PBF	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	GULL WING	10	TSSOP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1			50 ns	EIA-485-A; TIA-485-A; EIA-422		DIFFERENTIAL SCHMITT TRIGGER	3.3 V			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH					3 V	.5 mm	70 Cel			0 Cel	1	MATTE TIN	DUAL	S-PDSO-G10	1	1.1 mm	3 mm	Not Qualified			1		YES	e3	30	260	3 mm		70 ns
LTC2861CDE#PBF	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	NO LEAD	12	HVSON	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1	CMOS		50 ns	EIA-485-A; TIA-485-A; EIA-422		DIFFERENTIAL SCHMITT TRIGGER	5 V			SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE					4.5 V	.5 mm	70 Cel			0 Cel	1	MATTE TIN	DUAL	R-PDSO-N12	1	.8 mm	3 mm	Not Qualified			1		YES	e3	30	260	4 mm		70 ns
LTC491IS#PBF	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	1	CMOS		50 ns	EIA-422; EIA-485		DIFFERENTIAL SCHMITT TRIGGER	5 V			SMALL OUTLINE					4.75 V	1.27 mm	85 Cel		3-STATE	-40 Cel	1	MATTE TIN	DUAL	R-PDSO-G14	1	1.75 mm	3.9 mm	Not Qualified		COMPLEMENTARY	1	TRISTATABLE RECEIVER; 1 RECEIVER ACTIVE UNDER SHUTDOWN	YES	e3	30	260	8.65 mm		150 ns
LTM2882CV-3#PBF	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	NO LEAD	32	LGA	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	2	CMOS		500 ns	EIA-232-F; TIA-232-F		SCHMITT TRIGGER	3.3 V			GRID ARRAY					1.62 V	1.27 mm	70 Cel			0 Cel	2	GOLD	BOTTOM	R-PBGA-N32	3	2.95 mm	11.25 mm	Not Qualified			2		NO	e4	30	245	15 mm		400 ns
LTM2882CY-3#PBF	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	BALL	32	BGA	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	2	CMOS		500 ns	EIA-232-F; TIA-232-F		SCHMITT TRIGGER	3.3 V			GRID ARRAY					1.62 V	1.27 mm	70 Cel			0 Cel	2	TIN SILVER COPPER	BOTTOM	R-PBGA-B32	3	3.62 mm	11.25 mm	Not Qualified			2		NO	e1	30	245	15 mm		400 ns
MAX232EIPWR	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	2				EIA-232-F; TIA-232-F; V.28	10 mA	SCHMITT TRIGGER	5 V	5.5 V	5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	4.5 V	Line Driver or Receivers		4.5 V	.65 mm	85 Cel	5 V		-40 Cel	2	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G16	1	1.2 mm	4.4 mm	Not Qualified	3.2 Amp	INVERTED	2		NO	e4	NOT SPECIFIED	260	5 mm	10 V	0 ns
MAX3221ECPWE4	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1				EIA-232-F; TIA-232-F; V.28	1 mA	SCHMITT TRIGGER	3.3 V	3.6 V	3.3/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	3 V	Line Driver or Receivers	.000001 Amp	3 V	.65 mm	70 Cel	3.3 V		0 Cel	1	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	1.2 mm	4.4 mm	Not Qualified	1.6 Amp	INVERTED	1	ALSO OPERATES AT 5V SUPPLY	NO	e4	30	260	5 mm	10 V	150 ns
SN65C3221IPWRQ1	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1	CMOS	AEC-Q100		EIA-232	1 mA	SCHMITT TRIGGER	3.3 V	3.6 V	3.3/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	3 V	Line Driver or Receivers	.000001 Amp	3 V	.65 mm	85 Cel	3.3 V		-40 Cel	1	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G16	2	1.2 mm	4.4 mm	Not Qualified	1.6 Amp	INVERTED	1	CAN ALSO OPERATE WITH A 5V SUPPLY	NO	e4	NOT SPECIFIED	260	5 mm	10 V	0 ns
SN65HVD1470DR	Texas Instruments	LINE TRANSCEIVER	AUTOMOTIVE	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1			550 ns	EIA-485	1.1 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.6 V		SMALL OUTLINE		3 V			3 V	1.27 mm	125 Cel	3.3 V		-40 Cel	1	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G14	2	1.75 mm	3.9 mm				1		YES	e4	NOT SPECIFIED	260	8.65 mm		110 ns
SN65HVD3088EDGK	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	5.5 V	1	CMOS		20 ns	EIA-485-A; TIA-485-A	.9 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V	5.5 V	5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	4.5 V	Line Driver or Receivers	.0001 Amp	4.5 V	.65 mm	85 Cel	5 V	DIFFERENTIAL	-40 Cel	1	Nickel/Palladium/Gold/Silver (Ni/Pd/Au/Ag)	DUAL	S-PDSO-G8	1	1.1 mm	3 mm	Not Qualified	8 Amp	TRUE	1		YES	e4	NOT SPECIFIED	260	3 mm	1.5 V	100 ns
SN65HVD30DG4	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1	CMOS		18 ns	EIA-422-B; TIA-422-B; EIA-485-A; TIA-485-A; V.11	2.1 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.6 V	3.3	SMALL OUTLINE	SOP8,.25	3 V	Line Driver or Receivers		3 V	1.27 mm	85 Cel	3.3 V	3-STATE	-40 Cel	1	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified	8 Amp	COMPLEMENTARY	1	SIGNALING RATE 25MBPS	YES	e4	NOT SPECIFIED	260	4.9 mm	1.5 V	45 ns
SN75LBC179DRG4	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	1	BICMOS		18 ns	EIA-485; ISO 8482	5 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V	5.25 V	5	SMALL OUTLINE	SOP8,.25	4.75 V	Line Driver or Receivers	.0001 Amp	4.75 V	1.27 mm	70 Cel	5 V	DIFFERENTIAL	0 Cel	1	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified	8 Amp	COMPLEMENTARY	1		YES	e4	NOT SPECIFIED	260	4.9 mm	1.5 V	30 ns
ADM485ARM-REEL	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	5.25 V	1	BICMOS		15 ns	EIA-422; EIA-485	2.2 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19		Line Driver or Receivers	.000001 Amp	4.75 V	.65 mm	85 Cel			-40 Cel	1	Tin/Lead (Sn85Pb15)	DUAL	S-PDSO-G8	1	1.1 mm	3 mm	Not Qualified	4 Amp		1	1 RECEIVER ACTIVE UNDER SHUTDOWN; COMMON I/O; TRISTATABLE RECEIVERS	YES	e0		240	3 mm	1.5 V	30 ns
LTC2851IMS8#PBF	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1			50 ns	EIA-485-A; TIA-485-A; EIA-422		DIFFERENTIAL SCHMITT TRIGGER	3.3 V			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH					3 V	.65 mm	85 Cel			-40 Cel	1	MATTE TIN	DUAL	S-PDSO-G8	1	1.1 mm	3 mm	Not Qualified			1		YES	e3	30	260	3 mm		70 ns
MAX3075EESA	Maxim Integrated	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.63 V	1	BICMOS		800 ns	EIA-422; EIA-485; TIA-485	1.5 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V		3.3	SMALL OUTLINE	SOP8,.25		Line Driver or Receivers		2.97 V	1.27 mm	85 Cel			-40 Cel	1	TIN LEAD	DUAL	R-PDSO-G8		1.75 mm	3.9 mm	Not Qualified	1 Amp		1		YES	e0			4.9 mm	1.5 V	200 ns
MAX3075EESA+	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.63 V	1	BICMOS		800 ns	EIA-422; EIA-485; TIA-485	1.5 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V		3.3	SMALL OUTLINE	SOP8,.25		Line Driver or Receivers		2.97 V	1.27 mm	85 Cel			-40 Cel	1	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified	1 Amp		1		YES	e3	30	260	4.9 mm	1.5 V	200 ns
MAX3080EESD	Maxim Integrated	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	1			2600 ns	EIA-422; EIA-485	1 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5	SMALL OUTLINE	SOP14,.25		Line Driver or Receivers		4.75 V	1.27 mm	85 Cel			-40 Cel	1	TIN LEAD	DUAL	R-PDSO-G14	1	1.75 mm	3.9 mm	Not Qualified	4 Amp		1		YES	e0			8.65 mm	2 V	200 ns
MAX3080EESD+	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	1			2600 ns	EIA-422; EIA-485	1 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5	SMALL OUTLINE	SOP14,.25		Line Driver or Receivers		4.75 V	1.27 mm	85 Cel			-40 Cel	1	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G14	1	1.75 mm	3.9 mm	Not Qualified	4 Amp		1		YES	e3	30	260	8.65 mm	2 V	200 ns
MAX3221ECPWG4	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1				EIA-232-F; TIA-232-F; V.28	.01 mA	SCHMITT TRIGGER	3.3 V	3.6 V	3.3/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	3 V	Line Driver or Receivers	.000001 Amp	3 V	.65 mm	70 Cel	3.3 V		0 Cel	1	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	1.2 mm	4.4 mm	Not Qualified	1.6 Amp	INVERTED	1	ALSO OPERATES AT 5V SUPPLY	NO	e4	30	260	5 mm	10 V	150 ns
SN65LBC176AD	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	1	BICMOS		12 ns	EIA-485-A; TIA-485-A; ISO 8482	15 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V	5.25 V	5	SMALL OUTLINE	SOP8,.25	4.75 V	Line Driver or Receivers	.0001 Amp	4.75 V	1.27 mm	85 Cel	5 V		-40 Cel	1	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified	8 Amp		1		YES	e4	NOT SPECIFIED	260	4.9 mm	1 V	20 ns
TRSF3232EIDBR	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	16	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	2				EIA-232	1 mA	SCHMITT TRIGGER	3.3 V	3.6 V	3.3/5	SMALL OUTLINE, SHRINK PITCH	SSOP16,.3	3 V	Line Driver or Receivers	.000001 Amp	3 V	.65 mm	85 Cel	3.3 V		-40 Cel	2	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G16	1	2 mm	5.3 mm	Not Qualified	1.6 Amp	INVERTED	2		NO	e4	NOT SPECIFIED	260	6.2 mm	10 V	0 ns
TUSB542RWQR	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	18	HVQCCN	RECTANGULAR	PLASTIC/EPOXY	YES	1.98 V	2				GENERAL PURPOSE		DIFFERENTIAL	1.8 V	1.98 V		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		1.62 V			1.62 V	.4 mm	85 Cel	1.8 V		-40 Cel	2	NICKEL PALLADIUM GOLD	QUAD	R-PQCC-N18	2	.4 mm	2 mm				2		YES	e4	30	260	2.4 mm
TUSB544RNQT	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	40	HVQCCN	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4				GENERAL PURPOSE		DIFFERENTIAL	3.3 V	3.6 V		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		3 V			3 V	.4 mm	85 Cel	3.3 V		-40 Cel	4	NICKEL PALLADIUM GOLD	QUAD	R-PQCC-N40	1	.8 mm	4 mm				4		YES	e4	30	260	6 mm
ADM3483EARZ-REEL7	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1			1500 ns	EIA-422; EIA-485	2.2 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V		3.3	SMALL OUTLINE	SOP8,.25		Line Driver or Receivers		3 V	1.27 mm	85 Cel			-40 Cel	1	MATTE TIN	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified	2.5 Amp		1	DATA RATES UPTO 250 KBPS	YES	e3		260	5 mm	1.5 V	120 ns
ISL32492EIBZ-T7A	Renesas Electronics	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1	BICMOS		1000 ns	EIA-485; EIA-422		DIFFERENTIAL SCHMITT TRIGGER	5 V			SMALL OUTLINE					4.5 V	1.27 mm	85 Cel			-40 Cel	1	MATTE TIN	DUAL	R-PDSO-G8	2	1.75 mm	3.9 mm				1		YES	e3	30	260	4.9 mm		280 ns
LTC2852IDD#TRPBF	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	10	HVSON	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1	CMOS		50 ns	EIA-485-A; TIA-485-A; EIA-422		DIFFERENTIAL SCHMITT TRIGGER	3.3 V			SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE					3 V	.5 mm	85 Cel			-40 Cel	1	MATTE TIN	DUAL	S-PDSO-N10	1	.8 mm	3 mm	Not Qualified			1		YES	e3	30	260	3 mm		70 ns
LTC2855CGN#PBF	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	GULL WING	16	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1			50 ns	EIA-485-A; TIA-485-A		DIFFERENTIAL SCHMITT TRIGGER	3.3 V			SMALL OUTLINE, SHRINK PITCH					3 V	.635 mm	70 Cel			0 Cel	1	MATTE TIN	DUAL	R-PDSO-G16	1	1.75 mm	3.899 mm	Not Qualified			1		YES	e3	30	260	4.8895 mm		70 ns
MAX232ECDWG4	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	2				EIA-232-F; TIA-232-F; V.28	10 mA	SCHMITT TRIGGER	5 V		5	SMALL OUTLINE	SOP16,.4		Line Driver or Receivers		4.5 V	1.27 mm	70 Cel			0 Cel	2	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	2.65 mm	7.5 mm	Not Qualified	3.2 Amp		2		NO	e4	30	260	10.3 mm	10 V	0 ns
MAX232ECDWRG4	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	2				EIA-232-F; TIA-232-F; V.28	10 mA	SCHMITT TRIGGER	5 V	5.5 V	5	SMALL OUTLINE	SOP16,.4	4.5 V	Line Driver or Receivers		4.5 V	1.27 mm	70 Cel	5 V		0 Cel	2	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G16	1	2.65 mm	7.5 mm	Not Qualified	3.2 Amp	INVERTED	2		NO	e4	NOT SPECIFIED	260	10.3 mm	10 V	0 ns
MAX3080CPD	Maxim Integrated	LINE TRANSCEIVER	COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.25 V	1	CMOS		2600 ns	EIA-422; EIA-485	1 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5	IN-LINE	DIP14,.3		Line Driver or Receivers	.000125 Amp	4.75 V	2.54 mm	70 Cel			0 Cel	1	TIN LEAD	DUAL	R-PDIP-T14	1	4.572 mm	7.62 mm	Not Qualified	4 Amp	COMPLEMENTARY	1		YES	e0			19.05 mm	2 V	200 ns
MAX3080CPD+	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.25 V	1	CMOS		2600 ns	EIA-422; EIA-485	1 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5	IN-LINE	DIP14,.3		Line Driver or Receivers	.000125 Amp	4.75 V	2.54 mm	70 Cel			0 Cel	1	Matte Tin (Sn) - annealed	DUAL	R-PDIP-T14	1	4.572 mm	7.62 mm	Not Qualified	4 Amp	COMPLEMENTARY	1		YES	e3	30	260	19.05 mm	2 V	200 ns
MAX3223EEAP-T	Maxim Integrated	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	20	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	2	BICMOS			EIA-232; TIA-232; V.24; V.28	1 mA	SCHMITT TRIGGER	3.3 V		3.3/5	SMALL OUTLINE, SHRINK PITCH	SSOP20,.3		Line Driver or Receivers		3 V	.65 mm	85 Cel			-40 Cel	2	TIN LEAD	DUAL	R-PDSO-G20	1	1.99 mm	5.29 mm	Not Qualified	1.6 Amp		2		NO	e0			7.2 mm	10 V	0 ns
MAX3223EEAP+T	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	20	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	2	BICMOS			EIA-232; TIA-232; V.24; V.28	1 mA	SCHMITT TRIGGER	3.3 V		3.3/5	SMALL OUTLINE, SHRINK PITCH	SSOP20,.3		Line Driver or Receivers		3 V	.65 mm	85 Cel			-40 Cel	2	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G20	1	1.99 mm	5.29 mm	Not Qualified	1.6 Amp		2		NO	e3	30	260	7.2 mm	10 V	0 ns
MAX3442EEPA	Maxim Integrated	LINE TRANSCEIVER	INDUSTRIAL	THROUGH-HOLE	8	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.25 V	1	BICMOS		2000 ns	EIA-422; EIA-485	30 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5	IN-LINE	DIP8,.3		Line Driver or Receivers		4.75 V	2.54 mm	85 Cel			-40 Cel	1	TIN LEAD	DUAL	R-PDIP-T8		4.572 mm	7.62 mm	Not Qualified	1 Amp		1		YES	e0		245	9.375 mm	1.5 V	2000 ns
MAX3442EEPA+	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	THROUGH-HOLE	8	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.25 V	1	BICMOS		2000 ns	EIA-422; EIA-485; TIA-485	30 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5	IN-LINE	DIP8,.3		Line Driver or Receivers		4.75 V	2.54 mm	85 Cel			-40 Cel	1	Matte Tin (Sn) - annealed	DUAL	R-PDIP-T8	1	4.572 mm	7.62 mm	Not Qualified	1 Amp		1		YES	e3	30	260	9.375 mm	1.5 V	2000 ns
MAX483ECSA-T	Maxim Integrated	LINE TRANSCEIVER	COMMERCIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	1	CMOS		2000 ns	EIA-422; EIA-485	.65 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5	SMALL OUTLINE	SOP8,.25		Line Driver or Receivers	.000002 Amp	4.75 V	1.27 mm	70 Cel			0 Cel	1	TIN LEAD	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified	4 Amp	COMPLEMENTARY	1	COMMON I/O; 1 RECEIVER ACTIVE UNDER SHUTDOWN; TRISTATABLE RECEIVER	YES	e0			4.9 mm	1.5 V	2000 ns
MAX483ECSA+T	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	1	CMOS		2000 ns	EIA-422; EIA-485	.65 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5	SMALL OUTLINE	SOP8,.25		Line Driver or Receivers	.000002 Amp	4.75 V	1.27 mm	70 Cel			0 Cel	1	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified	4 Amp	COMPLEMENTARY	1	COMMON I/O; 1 RECEIVER ACTIVE UNDER SHUTDOWN; TRISTATABLE RECEIVER	YES	e3	30	260	4.9 mm	1.5 V	2000 ns
MAX483EESA	Maxim Integrated	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	1	CMOS		2000 ns	EIA-422; EIA-485	.65 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5	SMALL OUTLINE	SOP8,.25		Line Driver or Receivers	.001 Amp	4.75 V	1.27 mm	85 Cel			-40 Cel	1	TIN LEAD	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified	4 Amp	COMPLEMENTARY	1	COMMON I/O; 1 RECEIVER ACTIVE UNDER SHUTDOWN; TRISTATABLE RECEIVER	YES	e0	40	260	4.9 mm	1.5 V	2000 ns
MAX483EESA+	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	1	CMOS		2000 ns	EIA-422; EIA-485	.65 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5	SMALL OUTLINE	SOP8,.25		Line Driver or Receivers	.001 Amp	4.75 V	1.27 mm	85 Cel			-40 Cel	1	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified	4 Amp	COMPLEMENTARY	1	COMMON I/O; 1 RECEIVER ACTIVE UNDER SHUTDOWN; TRISTATABLE RECEIVER	YES	e3	30	260	4.9 mm	1.5 V	2000 ns
MXL1535EEWI-T	Maxim Integrated	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	28	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1	BICMOS		1560 ns	EIA-422; EIA-485	70 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5	SMALL OUTLINE	SOP28,.4		Line Driver or Receivers		4.5 V	1.27 mm	85 Cel			-40 Cel	1	TIN LEAD	DUAL	R-PDSO-G28	1	2.65 mm	7.5 mm	Not Qualified	4 Amp		1		YES	e0			17.9 mm	1.5 V	855 ns
MXL1535EEWI+T	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	28	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1	BICMOS		1560 ns	EIA-422; EIA-485		DIFFERENTIAL SCHMITT TRIGGER	5 V			SMALL OUTLINE					4.5 V	1.27 mm	85 Cel			-40 Cel	1	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G28	1	2.65 mm	7.5 mm	Not Qualified			1		YES	e3	30	260	17.9 mm		855 ns
SN65C1168ENS	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	2			16 ns	EIA-422-B; TIA-422-B; V.11	9 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V	5.5 V	5	SMALL OUTLINE	SOP16,.3	4.5 V	Line Driver or Receivers	.000001 Amp	4.5 V	1.27 mm	85 Cel	5 V	3-STATE	-40 Cel	2	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	2 mm	5.3 mm	Not Qualified	20 Amp	TRUE	2		YES	e4	30	260	10.2 mm	2 V	27 ns
SN65HVD33DG4	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1	CMOS		18 ns	EIA-422-B; TIA-422-B; EIA-485-A; TIA-485-A; V.11	2 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.6 V	3.3	SMALL OUTLINE	SOP14,.25	3 V	Line Driver or Receivers		3 V	1.27 mm	85 Cel		3-STATE	-40 Cel	1	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G14	1	1.75 mm	3.9 mm	Not Qualified	60 Amp	COMPLEMENTARY	1	SIGNALING RATE 25MBPS	YES	e4	NOT SPECIFIED	260	8.65 mm	1.5 V	45 ns
SN65HVD37DR	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1	BICMOS		20 ns	EIA-485-A; TIA-485-A	.8 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.6 V	3.3	SMALL OUTLINE	SOP14,.25	3 V	Line Driver or Receivers		3 V	1.27 mm	85 Cel	3.3 V	DIFFERENTIAL	-40 Cel	1	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G14	1	1.75 mm	3.9 mm	Not Qualified	8 Amp	COMPLEMENTARY	1		YES	e4	30	260	8.65 mm	1.5 V	75 ns

Line Drivers & Receivers

Line drivers and receivers are electronic components that are used to transmit and receive data signals over long distances. They are commonly used in industrial and commercial applications that require reliable and high-speed data transmission.

Line drivers are electronic components that amplify signals and provide the necessary voltage and current to drive the transmission line. They are used to ensure that the data signal maintains its integrity and strength as it travels through the transmission line.

Line receivers are electronic components that are used to receive the data signal and convert it back to a usable form. They typically include a differential amplifier and a threshold detector to ensure that the received signal is of sufficient quality and strength to be used by the receiving device.

Line drivers and receivers can be classified into several types based on their specific applications and characteristics. Some of the most common types of line drivers and receivers include RS-232, RS-422, and RS-485.