16 Line Drivers & Receivers 2,400+

Reset All

Part	Manufacturer	Interface IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	Maximum Supply Voltage	No. of Functions	Technology	Screening Level	Maximum Transmit Delay	Interface Standard	Maximum Supply Current	Input Characteristics	Nominal Supply Voltage	Maximum Supply Voltage-1	Power Supplies (V)	Nominal Negative Supply Voltage	Package Style (Meter)	Package Equivalence Code	Minimum Supply Voltage-1	Sub-Category	Maximum High Level Input Current	Minimum Supply Voltage	Terminal Pitch	Maximum Operating Temperature	Nominal Supply Voltage-1	Output Characteristics	Minimum Operating Temperature	Driver No. of Bits	Terminal Finish	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Seated Height	Width	Qualification	Maximum Output Low Current	Output Polarity	Receiver No. of Bits	Additional Features	Differential Output	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Minimum Out Swing	Maximum Receive Delay
SN7534050NSG4	Texas Instruments	LINE TRANSCEIVER	OTHER	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	2			25 ns	EIA-422-B; TIA-422-B; V.11	110 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V	5.25 V	5		SMALL OUTLINE	SOP16,.3	4.75 V	Line Driver or Receivers	.00002 Amp	4.75 V	1.27 mm	85 Cel	5 V	DIFFERENTIAL	-20 Cel	2	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	2 mm	5.3 mm	Not Qualified	16 Amp	COMPLEMENTARY	2	RECEIVER 3-STATE OUTPUTS	YES	e4	30	260	10.2 mm	1.5 V	35 ns
SP202EEN-L	Exar	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	2	CMOS		3000 ns	EIA-232-D; V.28	5 mA	SCHMITT TRIGGER	5 V		5		SMALL OUTLINE	SOP16,.25		Line Driver or Receivers	.0002 Amp	4.5 V	1.27 mm	85 Cel			-40 Cel	2	MATTE TIN	DUAL	R-PDSO-G16	2	1.75 mm	3.9 mm	Not Qualified	3.2 Amp		2		NO	e3		260	9.9 mm	10 V	1000 ns
EQCO125X40C1T-I/8EX	Microchip Technology	LINE TRANSCEIVER		NO LEAD	16	HVQCCN	SQUARE	PLASTIC/EPOXY	YES		1				GENERAL PURPOSE		STANDARD	1.25 V				CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.16SQ,25					.65 mm					1	Nickel/Palladium/Gold (Ni/Pd/Au)	QUAD	S-PQCC-N16		.95 mm	4 mm				1		NO	e4			4 mm
FIN1047MX	Onsemi	LINE DRIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4			1.7 ns	EIA-644; TIA-644		STANDARD	3.3 V		3.3		SMALL OUTLINE	SOP16,.25		Line Driver or Receivers	.00002 Amp	3 V	1.27 mm	85 Cel		3-STATE	-40 Cel	4	MATTE TIN	DUAL	R-PDSO-G16	1	1.75 mm	3.9 mm	Not Qualified					YES	e3	30	260	9.9 mm	.25 V
HIN232CPZ	Renesas Electronics	LINE TRANSCEIVER	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.5 V	2				V.28; EIA-232-E	10 mA	SCHMITT TRIGGER	5 V				IN-LINE	DIP16,.3				4.5 V	2.54 mm	70 Cel			0 Cel	2	MATTE TIN	DUAL	R-PDIP-T16		5.33 mm	7.62 mm		1.6 Amp	TRUE	2		NO	e3			19.17 mm	10 V
MAX3221CPW	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1	CMOS			EIA-232-F; TIA-232-F; V.28	1 mA	SCHMITT TRIGGER	3.3 V	5.5 V	3.3/5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	4.5 V	Line Driver or Receivers	.000001 Amp	3 V	.65 mm	70 Cel	5 V		0 Cel	1	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	1.2 mm	4.4 mm	Not Qualified	1.6 Amp		1	ALSO OPERATE WITH 5V SUPPLY	NO	e4	30	260	5 mm	10 V	150 ns
MAX3227EETE-T	Maxim Integrated	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	16	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	5.5 V	1	BICMOS			EIA-232; TIA-232; V.24; V.28	1 mA	SCHMITT TRIGGER	3.3 V		3.3/5		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.12SQ,20		Line Driver or Receivers		3 V	.8 mm	85 Cel			-40 Cel	1		QUAD	S-PQCC-N16	1	.8 mm	5 mm	Not Qualified	1.6 Amp		1		NO				5 mm	10 V	0 ns
MAX3227EETE+T	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	16	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	5.5 V	1	BICMOS			EIA-232; TIA-232; V.24; V.28	1 mA	SCHMITT TRIGGER	3.3 V		3.3/5		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.12SQ,20		Line Driver or Receivers		3 V	.8 mm	85 Cel			-40 Cel	1	Matte Tin (Sn) - annealed	QUAD	S-PQCC-N16	1	.8 mm	5 mm	Not Qualified	1.6 Amp		1		NO	e3	30	260	5 mm	10 V	0 ns
SN65LVDM051PWRG4	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	2	CMOS		2.7 ns	GENERAL PURPOSE	20 mA	DIFFERENTIAL	3.3 V	3.6 V	3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	3 V	Line Driver or Receivers	.00002 Amp	3 V	.65 mm	85 Cel	3.3 V	DIFFERENTIAL	-40 Cel	2	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G16	1	1.2 mm	4.4 mm	Not Qualified	8 Amp	TRUE	2		YES	e4	NOT SPECIFIED	260	5 mm	.247 V	4.5 ns
AM26C32CNSRE4	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	4	BICMOS			EIA-422-B; TIA-422-B; EIA-423-B; TIA-423-B; V.10; V.11	15 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		SMALL OUTLINE	SOP16,.3		Line Driver or Receivers		4.5 V	1.27 mm	70 Cel			0 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	2 mm	5.3 mm	Not Qualified	6 Amp		4		NO	e4	30	260	10.2 mm		27 ns
AM26C32INSRE4	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	4	BICMOS			EIA-422-B; TIA-422-B; EIA-423-B; TIA-423-B; V.10; V.11	15 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		SMALL OUTLINE	SOP16,.3		Line Driver or Receivers		4.5 V	1.27 mm	85 Cel			-40 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	2 mm	5.3 mm	Not Qualified	6 Amp		4		NO	e4	30	260	10.2 mm		27 ns
AM26C32INSRG4	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	4	BICMOS			EIA-422-B; TIA-422-B; EIA-423-B; TIA-423-B; V.10; V.11	15 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		SMALL OUTLINE	SOP16,.3		Line Driver or Receivers		4.5 V	1.27 mm	85 Cel			-40 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	2 mm	5.3 mm	Not Qualified	6 Amp		4		NO	e4	30	260	10.2 mm		27 ns
AM26LS32AMJB	Texas Instruments	LINE RECEIVER	MILITARY	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	5.5 V	4	BIPOLAR	MIL-STD-883 Class B		EIA-422-B; TIA-422-B; EIA-423-B; TIA-423-B; V.10; V.11	70 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V	5.5 V	5		IN-LINE	DIP16,.3	4.5 V	Line Driver or Receivers		4.5 V	2.54 mm	125 Cel	5 V	3-STATE	-55 Cel		TIN LEAD	DUAL	R-GDIP-T16		5.08 mm	7.62 mm	Not Qualified	8 Amp	TRUE	4		NO	e0			19.56 mm		35 ns
DS26LS31MJ/883C	National Semiconductor		MILITARY	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC	NO			BIPOLAR	MIL-STD-883 Class C	15 ns				5 V		5		IN-LINE	DIP16,.3		Line Driver or Receivers	.00002 Amp		2.54 mm	125 Cel		3-STATE	-55 Cel	4	Tin/Lead (Sn/Pb)	DUAL	R-XDIP-T16				Not Qualified					YES	e0				2 V
DS3691MX/NOPB	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	2	BIPOLAR		300 ns	EIA-423; EIA-442		STANDARD	5 V		5/+-5	-5 V	SMALL OUTLINE	SOP16,.25		Line Driver or Receivers	.00004 Amp	4.75 V	1.27 mm	70 Cel		3-STATE	0 Cel	2	MATTE TIN	DUAL	R-PDSO-G16	1	1.75 mm	3.9 mm	Not Qualified				CAN ALSO BE USED AS SINGLE ENDED DRIVER; CONFIGURABLE INTERFACE STANDARDS	YES	e3	30	260	9.9 mm	2 V	0 ns
DS90LV049HMTX/NOPB	Texas Instruments	LINE TRANSCEIVER	AUTOMOTIVE	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	2	CMOS		2 ns	EIA-644-A; TIA-644-A	35 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.6 V	3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	3 V	Line Driver or Receivers	.00001 Amp	3 V	.65 mm	125 Cel	3.3 V	DIFFERENTIAL	-40 Cel	2	MATTE TIN	DUAL	R-PDSO-G16	1	1.2 mm	4.4 mm	Not Qualified	2 Amp	COMPLEMENTARY	2		YES	e3	30	260	5 mm	.25 V	2 ns
HIN202EIBNZ	Renesas Electronics	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	2	CMOS		10000 ns	EIA-232; V.28		SCHMITT TRIGGER	5 V				SMALL OUTLINE					4.5 V	1.27 mm	85 Cel			-40 Cel	2	MATTE TIN	DUAL	R-PDSO-G16	2	1.75 mm	3.9 mm				2		NO	e3	30	260	9.9 mm		10000 ns
MAX14856GWE+T	Analog Devices	LINE TRANSCEIVER		GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1	BICMOS		1040 ns	EIA-422; TIA-422; EIA-485; TIA-485	12.5 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V	5.5 V			SMALL OUTLINE	SOP16,.4	3 V			1.71 V	1.27 mm	105 Cel	3.3 V	DIFFERENTIAL	-40 Cel	1	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G16	1	2.65 mm	7.5 mm			INVERTED	1		YES	e3	30	260	10.3 mm	1.5 V	240 ns
PCA9516APW,118	NXP Semiconductors	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	2.7 V	10	CMOS		150 ns	GENERAL PURPOSE		STANDARD	2.5 V				SMALL OUTLINE, THIN PROFILE, SHRINK PITCH					2.3 V	.65 mm	85 Cel			-40 Cel	10	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	1.1 mm	4.4 mm	Not Qualified			10	SUPPLY VOLTAGE 3.3 V ALSO POSSIBLE	NO	e4	30	260	5 mm		150 ns
SN75ALS194N	Texas Instruments	LINE DRIVER	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.25 V	2	BIPOLAR		14 ns	V.11; EIA-422-B	45 mA	STANDARD	5 V	5.25 V	5		IN-LINE	DIP16,.3	4.75 V	Line Driver or Receivers	.00005 Amp	4.75 V	2.54 mm	70 Cel	5 V	3-STATE	0 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDIP-T16		5.08 mm	7.62 mm	Not Qualified	48 Amp	COMPLEMENTARY			YES	e4			19.305 mm	2 V	0 ns
SN75LBC173ADG4	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	4	BICMOS			EIA-422; TIA-422; EIA-485; TIA-485; ISO 8482	20 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V	5.25 V	5		SMALL OUTLINE	SOP16,.25	4.75 V	Line Driver or Receivers		4.75 V	1.27 mm	70 Cel	5 V	3-STATE	0 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	1.75 mm	3.9 mm	Not Qualified	8 Amp	COMPLEMENTARY	4			e4	30	260	9.9 mm		16 ns
SP3232ECA-L	Exar	LINE TRANSCEIVER	COMMERCIAL	GULL WING	16	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	2				EIA-232; EIA-232-D; EIA-232-F; V.24; V.28; EIA-562; TIA-232; TIA-232-F; TIA-562	1 mA	SCHMITT TRIGGER	3.3 V		3/5		SMALL OUTLINE, SHRINK PITCH	SSOP16,.3		Line Driver or Receivers		3 V	.65 mm	70 Cel			0 Cel	2	MATTE TIN	DUAL	R-PDSO-G16	1	2 mm	5.3 mm	Not Qualified	1.6 Amp		2		NO	e3		260	6.2 mm	10 V	0 ns
TRSF3232EIDWR	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	2				EIA-232	1 mA	SCHMITT TRIGGER	3.3 V	3.6 V	3.3/5		SMALL OUTLINE	SOP16,.4	3 V	Line Driver or Receivers	.000001 Amp	3 V	1.27 mm	85 Cel	3.3 V		-40 Cel	2	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G16	1	2.65 mm	7.5 mm	Not Qualified	1.6 Amp	INVERTED	2		NO	e4	NOT SPECIFIED	260	10.3 mm	10 V	0 ns
ADM232AARWZ-REEL	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	2	BICMOS		3500 ns	EIA-232-E; V.28		SCHMITT TRIGGER	5 V				SMALL OUTLINE					4.5 V	1.27 mm	85 Cel		TOTEM-POLE	-40 Cel	2	MATTE TIN	DUAL	R-PDSO-G16	1	2.65 mm	7.5 mm	Not Qualified		INVERTED	2	EXTERNAL CHARGE PUMP	NO	e3	30	260	10.25 mm		500 ns
ADM2761EBRWZ-RL7	Analog Devices	LINE TRANSCEIVER	AUTOMOTIVE	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1			400 ns	EIA-485	8 mA		3.3 V	5.5 V			SMALL OUTLINE	SOP16,.4	3 V			1.7 V	1.27 mm	125 Cel	3.3 V	DIFFERENTIAL	-40 Cel	1		DUAL	R-PDSO-G16	3	2.65 mm	7.5 mm		1 Amp	TRUE	1				30	260	10.3 mm	1.5 V	200 ns
AM26C32IN	Texas Instruments	LINE RECEIVER	INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.5 V	4	BICMOS			EIA-422-B; TIA-422-B; EIA-423-B; TIA-423-B; V.10; V.11	15 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V	5.5 V	5		IN-LINE	DIP16,.3	4.5 V	Line Driver or Receivers		4.5 V	2.54 mm	85 Cel	5 V	3-STATE	-40 Cel		Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDIP-T16		5.08 mm	7.62 mm	Not Qualified	6 Amp	TRUE	4		NO	e4	NOT SPECIFIED	NOT SPECIFIED	19.305 mm		27 ns
AM26LV31IDRE4	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4	BICMOS		12 ns	EIA-422-B; TIA-422-B; V.11		STANDARD	3.3 V		3.3		SMALL OUTLINE	SOP16,.25		Line Driver or Receivers	.00001 Amp	3 V	1.27 mm	85 Cel		3-STATE	-45 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	1.75 mm	3.9 mm	Not Qualified				BUILT-IN DRIVER OUTPUT SHORT CIRCUIT PROTECTION	YES	e4	30	260	9.9 mm	.95 V	0 ns
HI-8382C	Holt Integrated Circuits	LINE DRIVER	INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC, METAL-SEALED COFIRED	NO	5.25 V	1	CMOS		3000 ns	ARINC 429		DIFFERENTIAL	5 V	15 V	5,+-12/+-15		IN-LINE	DIP16,.3	12 V	Line Driver or Receivers	.000001 Amp	4.75 V	2.54 mm	85 Cel		TOTEM-POLE	-40 Cel	1	GOLD	DUAL	R-CDIP-T16		5.08 mm	7.62 mm	Not Qualified		COMPLEMENTARY		LEAD FINISH-GOLD	YES	e4			20.57 mm	9.5 V	0 ns
HI-8382CM	Holt Integrated Circuits	LINE DRIVER	MILITARY	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC, METAL-SEALED COFIRED	NO	33 V	1	CMOS		3000 ns	ARINC 429	11 mA	DIFFERENTIAL	30 V		5,+-12/+-15		IN-LINE	DIP16,.3		Line Driver or Receivers	.000001 Amp	21.6 V	2.54 mm	125 Cel		TOTEM-POLE	-55 Cel	1	TIN LEAD	DUAL	R-CDIP-T16		5.08 mm	7.62 mm	Not Qualified		COMPLEMENTARY			YES	e0			19.05 mm	9.5 V	0 ns
HI-8596PCI	Holt Integrated Circuits	LINE DRIVER	INDUSTRIAL	NO LEAD	16	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	3.45 V	1	CMOS			ARINC 429		STANDARD	3.3 V		3.3		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.16SQ,25		Line Driver or Receivers	.0000001 Amp	3.15 V	.65 mm	85 Cel		3-STATE	-40 Cel	1	Tin/Lead (Sn/Pb)	QUAD	S-PQCC-N16	3	1 mm	4 mm	Not Qualified					YES	e0	NOT SPECIFIED	NOT SPECIFIED	4 mm	9 V	0 ns
LTC2803CDHC#PBF	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	NO LEAD	16	HVSON	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	2	CMOS		2000 ns	EIA-232-F; TIA-232-F		SCHMITT TRIGGER	3.3 V				SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE					1.8 V	.5 mm	70 Cel			0 Cel	2	MATTE TIN	DUAL	R-PDSO-N16	1	.8 mm	3 mm	Not Qualified			2		NO	e3	30	260	5 mm		400 ns
MAX202CPWR	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	2				EIA-232-F; TIA-232-F; V.28	15 mA	SCHMITT TRIGGER	5 V	5.5 V	5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	4.5 V	Line Driver or Receivers	.00001 Amp	4.5 V	.65 mm	70 Cel	5 V		0 Cel	2	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G16	1	1.2 mm	4.4 mm	Not Qualified	1.6 Amp	INVERTED	2		NO	e4	NOT SPECIFIED	260	5 mm	10 V	10000 ns
MAX3097EESE	Maxim Integrated	LINE RECEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	3	CMOS			EIA-422; EIA-485	4 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		3.3/5		SMALL OUTLINE	SOP16,.25		Line Driver or Receivers		3 V	1.27 mm	85 Cel			-40 Cel		TIN LEAD	DUAL	R-PDSO-G16	1	1.75 mm	3.9 mm	Not Qualified	4 Amp		3			e0			9.9 mm		85 ns
MAX3097EESE+	Analog Devices	LINE RECEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	3	CMOS			EIA-422; EIA-485		DIFFERENTIAL SCHMITT TRIGGER	5 V				SMALL OUTLINE					3 V	1.27 mm	85 Cel			-40 Cel		Matte Tin (Sn) - annealed	DUAL	R-PDSO-G16	1	1.75 mm	3.9 mm	Not Qualified			3			e3	30	260	9.9 mm		85 ns
SN65C3232PWRE4	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	2	BIPOLAR			EIA-232	1 mA	SCHMITT TRIGGER	3.3 V	3.6 V	3.3/5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	3 V	Line Driver or Receivers	.000001 Amp	3 V	.65 mm	85 Cel	3.3 V		-40 Cel	2	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	1.2 mm	4.4 mm	Not Qualified	1.6 Amp	INVERTED	2	ALSO OPERATES AT 5V SUPPLY	NO	e4	30	260	5 mm	10 V	0 ns
SN75ALS175N	Texas Instruments	LINE RECEIVER	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.25 V	4	BIPOLAR			V.10; V.11; X.26; X.27; EIA-422-B; EIA-423-B; EIA-485	24 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V	5.25 V	5		IN-LINE	DIP16,.3	4.75 V	Line Driver or Receivers	.00002 Amp	4.75 V	2.54 mm	70 Cel	5 V	3-STATE	0 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDIP-T16		5.08 mm	7.62 mm	Not Qualified	8 Amp	TRUE	4		NO	e4			19.305 mm		27 ns
SP3232EBEA-L/TR	Exar	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	2				EIA-232-F; TIA-232-F; V.24; V.28	1 mA	SCHMITT TRIGGER	3.3 V		3.3/5		SMALL OUTLINE	SSOP16,.3		Line Driver or Receivers		3 V	.65 mm	85 Cel			-40 Cel	2	MATTE TIN	DUAL	R-PDSO-G16	1	2 mm	5.3 mm	Not Qualified	1.6 Amp		2		NO	e3		260	6.2 mm	10 V	0 ns
TRS3221IPWR	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1				EIA-232-F; TIA-232-F; V.28	1 mA	SCHMITT TRIGGER	3.3 V	3.6 V	3.3/5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	3 V	Line Driver or Receivers	.000001 Amp	3 V	.65 mm	85 Cel	3.3 V		-40 Cel	1	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	1.2 mm	4.4 mm	Not Qualified	1.6 Amp	INVERTED	1	ALSO OPERATES AT 5V SUPPLY	NO	e4	30	260	5 mm	10 V	0 ns
TRSF3232ECPWR	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	2				EIA-232	1 mA	SCHMITT TRIGGER	3.3 V	3.6 V	3.3/5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	3 V	Line Driver or Receivers	.000001 Amp	3 V	.65 mm	70 Cel	3.3 V		0 Cel	2	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G16	1	1.2 mm	4.4 mm	Not Qualified	1.6 Amp	INVERTED	2		NO	e4	NOT SPECIFIED	260	5 mm	10 V	0 ns
ADM232AARN	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	2	BICMOS		3500 ns	EIA-232-E; V.28	8 mA	SCHMITT TRIGGER	5 V		5		SMALL OUTLINE	SOP16,.25		Line Driver or Receivers		4.5 V	1.27 mm	85 Cel		TOTEM-POLE	-40 Cel	2	TIN LEAD	DUAL	R-PDSO-G16	1	1.75 mm	3.9 mm	Not Qualified	3.2 Amp	INVERTED	2	EXTERNAL CHARGE PUMP	NO	e0		240	9.9 mm	10 V	500 ns
AM26LS31CNS	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	4	BIPOLAR		20 ns	EIA-422-B; TIA-422-B; V.11		STANDARD	5 V				SMALL OUTLINE					4.75 V	1.27 mm	70 Cel			0 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	2 mm	5.3 mm	Not Qualified					YES	e4	30	260	10.2 mm
DS26C32AMW/883	Texas Instruments	LINE RECEIVER	MILITARY	FLAT	16	DFP	RECTANGULAR	CERAMIC, GLASS-SEALED	YES	5.5 V	4	CMOS	MIL-STD-883		EIA-422; EIA-423; FED STD 1020; FED STD 1030	23 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V	5.5 V	5		FLATPACK	FL16,.3	4.5 V	Line Driver or Receivers		4.5 V	1.27 mm	125 Cel	5 V	3-STATE	-55 Cel		TIN LEAD	DUAL	R-GDFP-F16	1	2.032 mm	6.35 mm	Not Qualified	6 Amp	TRUE	4	LG-MAX	YES	e0			9.906 mm		35 ns
DS26LV32AW-QML	Texas Instruments	LINE RECEIVER	MILITARY	FLAT	16	DFP	RECTANGULAR	CERAMIC, GLASS-SEALED	YES	3.6 V	4	CMOS	MIL-PRF-38535 Class Q		EIA-422-B; TIA-422-B; V.11	.1 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.6 V	3.3		FLATPACK	FL16,.3	3 V	Line Driver or Receivers		3 V	1.27 mm	125 Cel	3.3 V	DIFFERENTIAL	-55 Cel		TIN LEAD	DUAL	R-GDFP-F16	1	2.032 mm	6.35 mm	Not Qualified	6 Amp	COMPLEMENTARY	4	LG-MAX	NO	e0			9.906 mm	2.4 V	45 ns
DS8922AM/NOPB	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	2	BIPOLAR		15 ns	EIA-422; ESDI; ST412; ST506	78 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		SMALL OUTLINE	SOP16,.25		Line Driver or Receivers	.00002 Amp	4.5 V	1.27 mm	70 Cel			0 Cel	2	MATTE TIN	DUAL	R-PDSO-G16	1	1.75 mm	3.9 mm	Not Qualified	8 Amp		2		YES	e3	30	260	9.9 mm	2.5 V	20 ns
LTC2804CDHC#PBF	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	NO LEAD	16	HVSON	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	2	CMOS		500 ns	EIA-232-F; TIA-232-F		SCHMITT TRIGGER	3.3 V				SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE					1.8 V	.5 mm	70 Cel			0 Cel	2	MATTE TIN	DUAL	R-PDSO-N16	1	.8 mm	3 mm	Not Qualified			2		NO	e3	30	260	5 mm		400 ns
MAX202EEWE-T	Maxim Integrated	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	2	CMOS			EIA-232-E; TIA-232-E; V.28	15 mA	SCHMITT TRIGGER	5 V		5		SMALL OUTLINE	SOP16,.4		Line Driver or Receivers	.0002 Amp	4.5 V	1.27 mm	85 Cel		TOTEM-POLE	-40 Cel	2	TIN LEAD	DUAL	R-PDSO-G16	1	2.65 mm	7.5 mm	Not Qualified	3.2 Amp	INVERTED	2	EXTERNAL CHARGE PUMP	NO	e0	20	245	10.3 mm	10 V	10000 ns
MAX202EEWE+T	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	2	CMOS			EIA-232-E; TIA-232-E; V.28	15 mA	SCHMITT TRIGGER	5 V		5		SMALL OUTLINE	SOP16,.4		Line Driver or Receivers	.0002 Amp	4.5 V	1.27 mm	85 Cel		TOTEM-POLE	-40 Cel	2	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G16	1	2.65 mm	7.5 mm	Not Qualified	3.2 Amp	INVERTED	2	EXTERNAL CHARGE PUMP	NO	e3	30	260	10.3 mm	10 V	10000 ns
MAX3041EWE	Maxim Integrated	LINE DRIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	4	CMOS		1500 ns	EIA-422; EIA-485		STANDARD	5 V		5		SMALL OUTLINE	SOP16,.4		Line Driver or Receivers		4.75 V	1.27 mm	85 Cel		3-STATE	-40 Cel	4	TIN LEAD	DUAL	R-PDSO-G16	1	2.65 mm	7.5 mm	Not Qualified					YES	e0			10.3 mm	1.5 V	0 ns

Line Drivers & Receivers

Line drivers and receivers are electronic components that are used to transmit and receive data signals over long distances. They are commonly used in industrial and commercial applications that require reliable and high-speed data transmission.

Line drivers are electronic components that amplify signals and provide the necessary voltage and current to drive the transmission line. They are used to ensure that the data signal maintains its integrity and strength as it travels through the transmission line.

Line receivers are electronic components that are used to receive the data signal and convert it back to a usable form. They typically include a differential amplifier and a threshold detector to ensure that the received signal is of sufficient quality and strength to be used by the receiving device.

Line drivers and receivers can be classified into several types based on their specific applications and characteristics. Some of the most common types of line drivers and receivers include RS-232, RS-422, and RS-485.