16 Line Drivers & Receivers 2,400+

Reset All

Part	Manufacturer	Interface IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	Maximum Supply Voltage	No. of Functions	No. of Channels	Technology	Screening Level	Maximum Transmit Delay	Interface Standard	Maximum Supply Current	Input Characteristics	Nominal Supply Voltage	Maximum Supply Voltage-1	Power Supplies (V)	Nominal Negative Supply Voltage	Package Style (Meter)	Package Equivalence Code	Minimum Supply Voltage-1	Sub-Category	Maximum High Level Input Current	Minimum Supply Voltage	Terminal Pitch	Maximum Operating Temperature	Nominal Supply Voltage-1	Output Characteristics	Minimum Operating Temperature	Driver No. of Bits	Terminal Finish	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Seated Height	Width	Qualification	Maximum Output Low Current	Output Polarity	Receiver No. of Bits	Additional Features	Differential Output	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Minimum Out Swing	Maximum Receive Delay
SN55LVDS32MDR	Texas Instruments	LINE TRANSCEIVER	MILITARY	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES		4					EIA-644		DIFFERENTIAL	3.3 V				SMALL OUTLINE						1.27 mm	125 Cel			-55 Cel	1		DUAL	R-PDSO-G16		1.75 mm	3.9 mm	Not Qualified			1		YES				9.9 mm
TB5D2HDWR	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4				3.5 ns	GENERAL PURPOSE		STANDARD	3.3 V		3.3/5		SMALL OUTLINE	SOP16,.4		Line Driver or Receivers	.0001 Amp	3 V	1.27 mm	85 Cel		3-STATE	-40 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	2	2.65 mm	7.5 mm	Not Qualified				ALSO OPERATES WITH 5V SUPPLY	YES	e4	30	250	10.3 mm	.5 V	0 ns
DRV612RGT	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	16	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1					GENERAL PURPOSE		SCHMITT TRIGGER	3.3 V				CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE					3 V	.5 mm	85 Cel			-40 Cel	1		QUAD	S-PQCC-N16		1 mm	3 mm	Not Qualified					NO				3 mm
DS34C87TN	Texas Instruments	LINE DRIVER	INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.5 V	4		CMOS		11 ns	EIA-422		STANDARD	5 V				IN-LINE					4.5 V	2.54 mm	85 Cel			-40 Cel	4		DUAL	R-PDIP-T16		5.08 mm	7.62 mm						YES				19.305 mm
TL145406N	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.5 V	3		BIPOLAR		500 ns	EIA-232-F; TIA-232-F; V.28	20 mA	SCHMITT TRIGGER	5 V	15 V	5,+-7.5/+-15	-9 V	IN-LINE	DIP16,.3	7.5 V	Line Driver or Receivers	.00001 Amp	4.5 V	2.54 mm	70 Cel	9 V	TOTEM-POLE	0 Cel	3	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDIP-T16		5.08 mm	7.62 mm	Not Qualified	10 Amp	INVERTED	3		NO	e4	NOT SPECIFIED	NOT SPECIFIED	19.305 mm	12 V	425 ns
TB5R2DRE4	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	4					GENERAL PURPOSE	40 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		SMALL OUTLINE	SOP16,.25		Line Driver or Receivers		4.5 V	1.27 mm	85 Cel			-40 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	2	1.75 mm	3.9 mm	Not Qualified	8 Amp		4		NO	e4	30	250	9.9 mm		5 ns
SNJ55113W	Texas Instruments	LINE DRIVER	MILITARY	FLAT	16	DFP	RECTANGULAR	CERAMIC, GLASS-SEALED	YES	5.5 V	2		BIPOLAR	MIL-PRF-38535	20 ns	GENERAL PURPOSE	65 mA	GATED	5 V	5.5 V	5		FLATPACK	FL16,.3	4.5 V	Line Driver or Receivers	.00004 Amp	4.5 V	1.27 mm	125 Cel	5 V		-55 Cel	2	Tin/Lead (Sn/Pb)	DUAL	R-GDFP-F16		2.03 mm	6.73 mm	Not Qualified	.04 Amp	COMPLEMENTARY		1 SINGLE INPUT DRIVER	YES	e0	NOT SPECIFIED	NOT SPECIFIED	10.16 mm	1.6 V	0 ns
SNJ55138J	Texas Instruments	LINE TRANSCEIVER	MILITARY	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	5.5 V	1		BIPOLAR	MIL-PRF-38535	24 ns	GENERAL PURPOSE	65 mA	STANDARD	5 V		5		IN-LINE	DIP16,.3		Line Driver or Receivers	.00004 Amp	4.5 V	2.54 mm	125 Cel		OPEN-COLLECTOR	-55 Cel	4		DUAL	R-GDIP-T16		5.08 mm	7.62 mm	Not Qualified	16 Amp	INVERTED	4	COMMON I/O	NO		NOT SPECIFIED	NOT SPECIFIED	19.56 mm	2 V	15 ns
TB5T1LDW	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	2				2 ns	GENERAL PURPOSE	35 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		SMALL OUTLINE	SOP16,.4		Line Driver or Receivers	.00002 Amp	4.5 V	1.27 mm	85 Cel			-40 Cel	2	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	2	2.65 mm	7.5 mm	Not Qualified	8 Amp		2		YES	e4	30	260	10.3 mm	.5 V	5.5 ns
SNJ55LVDS31J	Texas Instruments	LINE DRIVER	MILITARY	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	3.6 V	4		CMOS	MIL-PRF-38535	4.5 ns	EIA-644; TIA-644	35 mA	STANDARD	3.3 V	3.6 V	3.3		IN-LINE	DIP16,.3	3 V	Line Driver or Receivers	.00002 Amp	3 V	2.54 mm	125 Cel	3.3 V	3-STATE	-55 Cel	4	TIN LEAD	DUAL	R-GDIP-T16		5.08 mm	7.62 mm	Not Qualified		TRUE			YES	e0			19.56 mm	.247 V	0 ns
SNM55113J	Texas Instruments		MILITARY	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC	NO				BIPOLAR	MIL-STD-883 Class C	20 ns				5 V		5		IN-LINE	DIP16,.3		Line Driver or Receivers	.00004 Amp		2.54 mm	125 Cel		3-STATE	-55 Cel	2		DUAL	R-XDIP-T16				Not Qualified					YES					1.6 V
LMS202ECMX	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	2					EIA-232-E; TIA-232-E; V.28	7 mA	SCHMITT TRIGGER	5 V		5		SMALL OUTLINE	SOP16,.25		Line Driver or Receivers		4.5 V	1.27 mm	70 Cel			0 Cel	2	TIN LEAD	DUAL	R-PDSO-G16	1	1.753 mm	3.899 mm	Not Qualified	3.2 Amp		2		NO	e0	20	235	9.902 mm	10 V	1000 ns
LMH6555SQ/NOPB	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	16	HVQCCN	SQUARE	UNSPECIFIED	YES	3.6 V	1	1	BIPOLAR			GENERAL PURPOSE	156 mA	DIFFERENTIAL	3.3 V	3.63 V	3.3		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.16SQ,20	2.97 V	Line Driver or Receivers		3 V	.5 mm	85 Cel	3.3 V	DIFFERENTIAL	-40 Cel	1	MATTE TIN	QUAD	S-XQCC-N16	3	.8 mm	4 mm	Not Qualified		COMPLEMENTARY			YES	e3	30	260	4 mm	2.4 V	0 ns
LMH6555SQE	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	16	HVQCCN	SQUARE	UNSPECIFIED	YES	3.63 V	1					GENERAL PURPOSE		DIFFERENTIAL	3.3 V				CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE					2.97 V	.5 mm	85 Cel			-40 Cel	1	TIN LEAD	QUAD	S-XQCC-N16	2	.8 mm	4 mm						YES	e0	30	235	4 mm
LMS202EIMX	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	2					EIA-232-E; TIA-232-E; V.28	7 mA	SCHMITT TRIGGER	5 V		5		SMALL OUTLINE	SOP16,.25		Line Driver or Receivers		4.5 V	1.27 mm	85 Cel			-40 Cel	2	TIN LEAD	DUAL	R-PDSO-G16	1	1.753 mm	3.899 mm	Not Qualified	3.2 Amp		2		NO	e0	20	235	9.902 mm	10 V	1000 ns
TB5R1LDW	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	4					GENERAL PURPOSE	40 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		SMALL OUTLINE	SOP16,.4		Line Driver or Receivers		4.5 V	1.27 mm	85 Cel			-40 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	2	2.65 mm	7.5 mm	Not Qualified	8 Amp		4		NO	e4	30	250	10.3 mm		5 ns
SNC55115J	Texas Instruments	LINE RECEIVER	MILITARY	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	5.5 V	2		BIPOLAR	MIL-STD-883 Class B (Modified)	50 ns	GENERAL PURPOSE	50 mA	DIFFERENTIAL	5 V		5		IN-LINE	DIP16,.3		Line Driver or Receivers		4.5 V	2.54 mm	125 Cel			-55 Cel			DUAL	R-GDIP-T16		5.08 mm	7.62 mm	Not Qualified	15 Amp		2	OPEN-COLLECTOR OR TOTEM-POLE OUTPUT			NOT SPECIFIED	NOT SPECIFIED	19.56 mm		50 ns
TB5R3DWR	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	4					GENERAL PURPOSE	50 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		SMALL OUTLINE	SOP16,.4		Line Driver or Receivers		4.5 V	1.27 mm	85 Cel			-40 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	2.65 mm	7.5 mm	Not Qualified	8 Amp		4		NO	e4	30	260	10.3 mm		3.5 ns
DS3486M/NOPB	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES		4		BIPOLAR			EIA-422; EIA-423	85 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V	5.25 V	5		SMALL OUTLINE	SOP16,.25	4.75 V	Line Driver or Receivers	.00002 Amp		1.27 mm	70 Cel	5 V	3-STATE	0 Cel		MATTE TIN	DUAL	R-PDSO-G16	1	1.75 mm	3.9 mm	Not Qualified	8 Amp	TRUE	4			e3	30	260	9.9 mm		35 ns
TB5R2LDR	Texas Instruments		INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES				BIPOLAR				40 mA		5 V		5		SMALL OUTLINE	SOP16,.25		Line Driver or Receivers			1.27 mm	85 Cel			-40 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1			Not Qualified	8 Amp					e4	20	220			0 ns
TB5R2DW	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	4					GENERAL PURPOSE	40 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		SMALL OUTLINE	SOP16,.4		Line Driver or Receivers		4.5 V	1.27 mm	85 Cel			-40 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	2	2.65 mm	7.5 mm	Not Qualified	8 Amp		4		NO	e4	30	250	10.3 mm		5 ns
SNJ55138W	Texas Instruments	LINE TRANSCEIVER	MILITARY	FLAT	16	DFP	RECTANGULAR	CERAMIC, GLASS-SEALED	YES	5.5 V	1		BIPOLAR	MIL-PRF-38535	24 ns	GENERAL PURPOSE	65 mA	STANDARD	5 V		5		FLATPACK	FL16,.3		Line Driver or Receivers	.00004 Amp	4.5 V	1.27 mm	125 Cel		OPEN-COLLECTOR	-55 Cel	4		DUAL	R-GDFP-F16		2.03 mm	6.73 mm	Not Qualified	16 Amp	INVERTED	4	COMMON I/O	NO		NOT SPECIFIED	NOT SPECIFIED	10.2 mm	2 V	15 ns
SNC55116J	Texas Instruments		MILITARY	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC	NO				BIPOLAR	MIL-STD-883 Class B (Modified)			60 mA		5 V		5		IN-LINE	DIP16,.3		Line Driver or Receivers	.00004 Amp		2.54 mm	125 Cel			-55 Cel	1		DUAL	R-XDIP-T16				Not Qualified	15 Amp				YES					1.8 V	75 ns
SNM55114J	Texas Instruments		MILITARY	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC	NO				BIPOLAR	MIL-STD-883 Class C	20 ns				5 V		5		IN-LINE	DIP16,.3		Line Driver or Receivers	.00004 Amp		2.54 mm	125 Cel			-55 Cel	2		DUAL	R-XDIP-T16				Not Qualified					YES		NOT SPECIFIED	NOT SPECIFIED		1.6 V	0 ns
SN55113W	Texas Instruments	LINE DRIVER	MILITARY	FLAT	16	DFP	RECTANGULAR	CERAMIC, GLASS-SEALED	YES	5.5 V	2		BIPOLAR		20 ns	GENERAL PURPOSE	65 mA	GATED	5 V		5		FLATPACK	FL16,.3		Line Driver or Receivers	.00004 Amp	4.5 V	1.27 mm	125 Cel			-55 Cel	2		DUAL	R-GDFP-F16		2.03 mm	6.73 mm	Not Qualified		COMPLEMENTARY		1 SINGLE INPUT DRIVER	YES		NOT SPECIFIED	NOT SPECIFIED	10.2 mm	1.6 V	0 ns
LMS202EIM/NOPB	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	2					EIA-232-E; TIA-232-E; V.28	7 mA	SCHMITT TRIGGER	5 V		5		SMALL OUTLINE	SOP16,.25		Line Driver or Receivers		4.5 V	1.27 mm	85 Cel			-40 Cel	2	MATTE TIN	DUAL	R-PDSO-G16	1	1.753 mm	3.899 mm	Not Qualified	3.2 Amp		2		NO	e3	30	260	9.902 mm	10 V	1000 ns
TB5R1DWRE4	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	4					GENERAL PURPOSE	40 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		SMALL OUTLINE	SOP16,.4		Line Driver or Receivers		4.5 V	1.27 mm	85 Cel			-40 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	2	2.65 mm	7.5 mm	Not Qualified	8 Amp		4		NO	e4	30	250	10.3 mm		5 ns
SNJ55LBC172W	Texas Instruments	LINE DRIVER	MILITARY	FLAT	16	DFP	RECTANGULAR	CERAMIC, GLASS-SEALED	YES	5.25 V	4		BICMOS	MIL-PRF-38535	40 ns	EIA-485	7 mA	STANDARD	5 V	5.25 V	5		FLATPACK	FL16,.3	4.75 V	Line Driver or Receivers	.0001 Amp	4.75 V	1.27 mm	125 Cel	5 V	3-STATE	-55 Cel	4	Tin/Lead (Sn/Pb)	DUAL	R-GDFP-F16		2.03 mm	6.73 mm	Not Qualified	.1 Amp	TRUE			YES	e0	NOT SPECIFIED	NOT SPECIFIED	10.16 mm	1.1 V	0 ns
8004102EX	Texas Instruments	LINE DRIVER	MILITARY	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	5.5 V	1				25 ns	GENERAL PURPOSE		STANDARD	5 V				IN-LINE					4.5 V	2.54 mm	125 Cel			-55 Cel	2		DUAL	R-GDIP-T16		5.08 mm	7.62 mm					CONFIGURABLE INTERFACE STANDARDS; INDIVIDUAL ENABLES	YES				19.43 mm
SNJ55LBC173W	Texas Instruments	LINE RECEIVER	MILITARY	FLAT	16	DFP	RECTANGULAR	CERAMIC, METAL-SEALED COFIRED	YES	5.25 V	4		BICMOS	38535Q/M;38534H;883B	35 ns	V.11; EIA-422-A; EIA-423-A; EIA-485	11 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V	5.25 V	5		FLATPACK	FL16,.3	4.75 V	Line Driver or Receivers		4.75 V	1.27 mm	125 Cel	5 V	3-STATE	-55 Cel	4	Tin/Lead (Sn/Pb)	DUAL	R-CDFP-F16		1.71 mm	6.73 mm	Not Qualified	16 Amp	TRUE	4		NO	e0	NOT SPECIFIED	NOT SPECIFIED	10.16 mm		35 ns
N8T23N-10	Texas Instruments	LINE DRIVER	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.25 V	2		BIPOLAR		25 ns	IBM 360	60 mA	GATED	5 V				IN-LINE					4.75 V	2.54 mm	70 Cel		OPEN-EMITTER	0 Cel	1		DUAL	R-PDIP-T16		5.08 mm	7.62 mm	Not Qualified		TRUE			NO				19.305 mm
DS3487MX	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES		4		BIPOLAR		15 ns	EIA-422		STANDARD	5 V		5		SMALL OUTLINE	SOP16,.25		Line Driver or Receivers	.00005 Amp		1.27 mm	70 Cel		3-STATE	0 Cel	4	TIN LEAD	DUAL	R-PDSO-G16	1	1.75 mm	3.9 mm	Not Qualified					YES	e0	20	235	9.9 mm	2 V	0 ns
TB3R1D	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4		CMOS			GENERAL PURPOSE	34 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.6 V	3.3		SMALL OUTLINE	SOP16,.25	3 V	Line Driver or Receivers		3 V	1.27 mm	85 Cel	3.3 V		-40 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	2	1.75 mm	3.9 mm	Not Qualified	8 Amp	TRUE	4		YES	e4	30	250	9.9 mm		4 ns
TB5T1DWE4	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	2				2 ns	GENERAL PURPOSE	40 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		SMALL OUTLINE	SOP16,.4		Line Driver or Receivers	.00002 Amp	4.5 V	1.27 mm	85 Cel			-40 Cel	2	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	2	2.65 mm	7.5 mm	Not Qualified	8 Amp		2		YES	e4	30	260	10.3 mm	.7 V	5.5 ns
TB5T1DR	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	2				2 ns	GENERAL PURPOSE	35 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		SMALL OUTLINE	SOP16,.25		Line Driver or Receivers	.00002 Amp	4.5 V	1.27 mm	85 Cel			-40 Cel	2		DUAL	R-PDSO-G16		1.75 mm	3.9 mm	Not Qualified	8 Amp		2		YES		NOT SPECIFIED	NOT SPECIFIED	9.9 mm	.7 V	5.5 ns
DRV612RGTT	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	16	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1	2				GENERAL PURPOSE		SCHMITT TRIGGER	3.3 V	3.6 V	3.3		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.12SQ,20	3 V	Line Driver or Receivers	.000001 Amp	3 V	.5 mm	85 Cel	3.3 V		-40 Cel	1	Nickel/Palladium/Gold (Ni/Pd/Au)	QUAD	S-PQCC-N16	2	1 mm	3 mm	Not Qualified					NO	e4	NOT SPECIFIED	260	3 mm	6.15 V	0 ns
MAXT3221PW	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1					EIA-232-F; V.28		SCHMITT TRIGGER	3.3 V				SMALL OUTLINE, THIN PROFILE, SHRINK PITCH					3 V	.65 mm	70 Cel			0 Cel	1		DUAL	R-PDSO-G16		1.2 mm	4.4 mm	Not Qualified			1		NO				5 mm		0 ns
SN55LBC172W	Texas Instruments	LINE DRIVER	MILITARY	FLAT	16	DFP	RECTANGULAR	CERAMIC, GLASS-SEALED	YES	5.25 V	4		BICMOS		40 ns	EIA-485		STANDARD	5 V				FLATPACK					4.75 V	1.27 mm	125 Cel		3-STATE	-55 Cel	4		DUAL	R-GDFP-F16		2.03 mm	6.73 mm	Not Qualified		COMPLEMENTARY			YES				10.2 mm
LMS202CMWX	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	2					EIA-232-E; TIA-232-E; V.28	7 mA	SCHMITT TRIGGER	5 V		5		SMALL OUTLINE	SOP16,.4		Line Driver or Receivers		4.5 V	1.27 mm	70 Cel			0 Cel	2	TIN LEAD	DUAL	R-PDSO-G16	2A	2.65 mm	7.5 mm	Not Qualified	3.2 Amp		2		NO	e0		220	10.3 mm	10 V	1000 ns
V62/17603-01XE	Texas Instruments	LINE RECEIVER	MILITARY	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	4		BICMOS			EIA-422; TIA-422; EIA-485; TIA-485; ISO 8482	32 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V	5.25 V			SMALL OUTLINE		4.75 V			4.75 V	1.27 mm	125 Cel	5 V		-55 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	1.75 mm	3.9 mm				4		NO	e4	30	260	9.9 mm		18 ns
TB5D2HDR	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	4				3.5 ns	GENERAL PURPOSE	40 mA	STANDARD	3.3 V	3.6 V	3.3/5		SMALL OUTLINE	SOP16,.25	3 V	Line Driver or Receivers	.0001 Amp	4.5 V	1.27 mm	85 Cel	3.3 V	3-STATE	-40 Cel	4	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G16	2	1.75 mm	3.9 mm	Not Qualified				ALSO OPERATES WITH 5V SUPPLY	YES	e4	NOT SPECIFIED	250	9.9 mm	.5 V	0 ns
SN55LBC180RSA	Texas Instruments	LINE TRANSCEIVER	MILITARY	NO LEAD	16	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	5.25 V	1		BICMOS		18 ns	EIA-485; ISO 8482		DIFFERENTIAL SCHMITT TRIGGER	5 V				CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE					4.75 V	.65 mm	125 Cel			-55 Cel	1		QUAD	S-PQCC-N16		1 mm	4 mm	Not Qualified			1	TRISTATABLE RECEIVER; 1 RECEIVER ACTIVE UNDER SHUTDOWN	YES				4 mm		33 ns
SN55LBC175W	Texas Instruments	LINE RECEIVER	MILITARY	FLAT	16	DFP	RECTANGULAR	CERAMIC, GLASS-SEALED	YES	5.25 V	4		BICMOS			V.11; EIA-422-A; EIA-423-A; EIA-485	20 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V				FLATPACK					4.75 V	1.27 mm	125 Cel		3-STATE	-55 Cel			DUAL	R-GDFP-F16		2.03 mm	6.73 mm	Not Qualified		TRUE	4						10.2 mm		35 ns
TB5T1DRE4	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	2				2 ns	GENERAL PURPOSE	40 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		SMALL OUTLINE	SOP16,.25		Line Driver or Receivers	.00002 Amp	4.5 V	1.27 mm	85 Cel			-40 Cel	2		DUAL	R-PDSO-G16		1.75 mm	3.9 mm	Not Qualified	8 Amp		2		YES		NOT SPECIFIED	NOT SPECIFIED	9.9 mm	.7 V	5.5 ns
TB5R3LDR	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	4					GENERAL PURPOSE	50 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		SMALL OUTLINE	SOP16,.25		Line Driver or Receivers		4.5 V	1.27 mm	85 Cel			-40 Cel			DUAL	R-PDSO-G16		1.75 mm	3.9 mm	Not Qualified	8 Amp		4		NO		NOT SPECIFIED	NOT SPECIFIED	9.9 mm		3.5 ns
M38510/10403BFX	Texas Instruments	LINE DRIVER	MILITARY	FLAT	16	DFP	RECTANGULAR	CERAMIC, METAL-SEALED COFIRED	YES	5.5 V	2			MIL-PRF-38535 Class B	30 ns			DIFFERENTIAL	5 V				FLATPACK					4.5 V		125 Cel			-55 Cel			DUAL	R-CDFP-F16				Not Qualified					YES						30 ns
TL145406DW	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	3		BIPOLAR		500 ns	EIA-232-F; TIA-232-F; V.28	20 mA	SCHMITT TRIGGER	5 V	15 V	5,+-7.5/+-15	-9 V	SMALL OUTLINE	SOP16,.4	7.5 V	Line Driver or Receivers	.00001 Amp	4.5 V	1.27 mm	70 Cel	9 V	TOTEM-POLE	0 Cel	3	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G16	1	2.65 mm	7.5 mm	Not Qualified	10 Amp	INVERTED	3		NO	e4	NOT SPECIFIED	260	10.3 mm	12 V	425 ns
DS34C86TN	Texas Instruments	LINE RECEIVER	INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.5 V	4		CMOS			EIA-422; EIA-423; FED STD 1020; FED STD 1030		DIFFERENTIAL SCHMITT TRIGGER	5 V				IN-LINE					4.5 V	2.54 mm	85 Cel			-40 Cel			DUAL	R-PDIP-T16		5.08 mm	7.62 mm				4		NO				19.305 mm		30 ns

Line Drivers & Receivers

Line drivers and receivers are electronic components that are used to transmit and receive data signals over long distances. They are commonly used in industrial and commercial applications that require reliable and high-speed data transmission.

Line drivers are electronic components that amplify signals and provide the necessary voltage and current to drive the transmission line. They are used to ensure that the data signal maintains its integrity and strength as it travels through the transmission line.

Line receivers are electronic components that are used to receive the data signal and convert it back to a usable form. They typically include a differential amplifier and a threshold detector to ensure that the received signal is of sufficient quality and strength to be used by the receiving device.

Line drivers and receivers can be classified into several types based on their specific applications and characteristics. Some of the most common types of line drivers and receivers include RS-232, RS-422, and RS-485.