20 Line Drivers & Receivers 2,400+

Reset All

Part	Manufacturer	Interface IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Total Dose (V)	Package Body Material	Surface Mount	Maximum Supply Voltage	No. of Functions	Technology	Screening Level	Maximum Transmit Delay	Interface Standard	Maximum Supply Current	Input Characteristics	Nominal Supply Voltage	Maximum Supply Voltage-1	Power Supplies (V)	Nominal Negative Supply Voltage	Package Style (Meter)	Package Equivalence Code	Minimum Supply Voltage-1	Sub-Category	Maximum High Level Input Current	Minimum Supply Voltage	Terminal Pitch	Maximum Operating Temperature	Nominal Supply Voltage-1	Output Characteristics	Minimum Operating Temperature	Driver No. of Bits	Terminal Finish	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Seated Height	Width	Qualification	Maximum Output Low Current	Output Polarity	Receiver No. of Bits	Additional Features	Differential Output	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Minimum Out Swing	Maximum Receive Delay
MC10H116FNR2G	Onsemi	LINE RECEIVER	COMMERCIAL EXTENDED	J BEND	20	QCCJ	SQUARE		PLASTIC/EPOXY	YES		3	ECL			GENERAL PURPOSE	23 mA	DIFFERENTIAL			-5.2	-5.2 V	CHIP CARRIER	LDCC20,.4SQ		Line Driver or Receivers			1.27 mm	75 Cel			0 Cel		MATTE TIN	QUAD	S-PQCC-J20	3	4.57 mm	8.965 mm	Not Qualified			3		YES	e3	30	260	8.965 mm		1.3 ns
MC100EL17DWG	Onsemi	LINE RECEIVER	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	5.7 V	4	ECL			GENERAL PURPOSE	33 mA	DIFFERENTIAL	5 V		-4.2/-5.5		SMALL OUTLINE	SOP20,.4		Line Driver or Receivers		4.2 V	1.27 mm	85 Cel			-40 Cel		MATTE TIN	DUAL	R-PDSO-G20	3	2.65 mm	7.5 mm	Not Qualified			4	ALSO OPERATE WITH -4.2V TO -5.7V SUPPLY IN NECL MODE	YES	e3	30	260	12.8 mm		.55 ns
MC10115FN	Onsemi	LINE RECEIVER	OTHER	J BEND	20	QCCJ	SQUARE		PLASTIC/EPOXY	YES		4	ECL			GENERAL PURPOSE	29 mA	DIFFERENTIAL			-5.2	-5.2 V	CHIP CARRIER	LDCC20,.4SQ		Line Driver or Receivers			1.27 mm	85 Cel			-30 Cel		TIN LEAD	QUAD	S-PQCC-J20	1	4.57 mm	8.965 mm	Not Qualified			4		NO	e0		235	8.965 mm		2.9 ns
MC10SX1190DTR2	Onsemi	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	20	TSSOP	RECTANGULAR		PLASTIC/EPOXY	YES	5.5 V	1	ECL		.65 ns	GENERAL PURPOSE		DIFFERENTIAL	5 V				SMALL OUTLINE, THIN PROFILE, SHRINK PITCH					3 V	.65 mm	85 Cel			-40 Cel	1	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G20	1	1.2 mm	4.4 mm	Not Qualified			1	OPERATES AT -3 TO -5.5V SUPPLY IN ECL MODE	YES	e4		260	6.5 mm		.38 ns
MC10129FN	Onsemi	LINE RECEIVER	OTHER	J BEND	20	QCCJ	SQUARE		PLASTIC/EPOXY	YES		4	ECL			GENERAL PURPOSE		SCHMITT TRIGGER	5 V			-5.2 V	CHIP CARRIER						1.27 mm	85 Cel			-30 Cel		TIN LEAD	QUAD	S-PQCC-J20		4.57 mm	8.965 mm	Not Qualified			4			e0			8.965 mm		15 ns
MC10216FNR2	Onsemi	LINE RECEIVER	OTHER	J BEND	20	QCCJ	SQUARE		PLASTIC/EPOXY	YES		3	ECL			GENERAL PURPOSE	27 mA	DIFFERENTIAL			-5.2	-5.2 V	CHIP CARRIER	LDCC20,.4SQ		Line Driver or Receivers			1.27 mm	85 Cel			-30 Cel		TIN LEAD	QUAD	S-PQCC-J20		4.57 mm	8.965 mm	Not Qualified			3		YES	e0		235	8.965 mm		2.5 ns
MC10116FNR2	Onsemi	LINE RECEIVER	OTHER	J BEND	20	QCCJ	SQUARE		PLASTIC/EPOXY	YES		3	ECL10K			GENERAL PURPOSE	23 mA	DIFFERENTIAL SCHMITT TRIGGER			-5.2	-5.2 V	CHIP CARRIER	LDCC20,.4SQ		Line Driver or Receivers			1.27 mm	85 Cel			-30 Cel		TIN LEAD	QUAD	S-PQCC-J20	1	4.57 mm	8.9662 mm	Not Qualified			3			e0		235	8.9662 mm		2.9 ns
MC10EP17DTR2	Onsemi	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	20	TSSOP	RECTANGULAR		PLASTIC/EPOXY	YES	5.5 V	4	ECL		.3 ns	GENERAL PURPOSE	62 mA	DIFFERENTIAL	3.3 V		-3.0/-5.5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP20,.25		Line Driver or Receivers		3 V	.65 mm	85 Cel			-40 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G20		1.2 mm	4.4 mm	Not Qualified			4	CAN ALSO OPERATE WITH -3V TO -5.5V SUPPLY IN NECL MODE	YES	e4		260	6.5 mm		.3 ns
MC100EP17DTG	Onsemi	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	20	TSSOP	RECTANGULAR		PLASTIC/EPOXY	YES	5.5 V	4	ECL		.32 ns	GENERAL PURPOSE		DIFFERENTIAL	3.3 V		-3.0/-5.5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP20,.25		Line Driver or Receivers		3 V	.65 mm	85 Cel			-40 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G20	1	1.2 mm	4.4 mm	Not Qualified			4	CAN ALSO OPERATE WITH -3V TO -5.5V SUPPLY IN NECL MODE	YES	e4	30	260	6.5 mm		.32 ns
MC10SX1190DTR2G	Onsemi	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	20	TSSOP	RECTANGULAR		PLASTIC/EPOXY	YES	5.5 V	1			.65 ns	GENERAL PURPOSE		DIFFERENTIAL	5 V				SMALL OUTLINE, THIN PROFILE, SHRINK PITCH					3 V	.65 mm	85 Cel			-40 Cel	1	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G20	1	1.2 mm	4.4 mm	Not Qualified			1		YES	e4	30	260	6.5 mm		.38 ns
MC100EP17MNG	Onsemi	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	20	HVQCCN	SQUARE		UNSPECIFIED	YES	5.5 V	4	ECL		.32 ns	GENERAL PURPOSE	70 mA	DIFFERENTIAL	3.3 V		+-3.3/+-5		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC20,.16SQ,20		Line Driver or Receivers		3 V	.5 mm	85 Cel			-40 Cel	4	TIN	QUAD	S-XQCC-N20	1	1 mm	4 mm	Not Qualified			4	CAN ALSO OPERATE WITH -3V TO -5.5V SUPPLY IN NECL MODE	YES	e3		260	4 mm		.32 ns
MC10114FNR2	Onsemi	LINE RECEIVER	OTHER	J BEND	20	QCCJ	SQUARE		PLASTIC/EPOXY	YES		3	ECL			GENERAL PURPOSE	39 mA	DIFFERENTIAL			-5.2	-5.2 V	CHIP CARRIER	LDCC20,.4SQ		Line Driver or Receivers			1.27 mm	85 Cel			-30 Cel		TIN LEAD	QUAD	S-PQCC-J20		4.57 mm	8.965 mm	Not Qualified			3		YES	e0		235	8.965 mm		4 ns
MC10EP17DWR2G	Onsemi	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	5.5 V	4	ECL		.3 ns	GENERAL PURPOSE	68 mA	DIFFERENTIAL	3.3 V		+-3.3/+-5		SMALL OUTLINE	SOP20,.4		Line Driver or Receivers		3 V	1.27 mm	85 Cel			-40 Cel	4	TIN	DUAL	R-PDSO-G20	3	2.65 mm	7.5 mm	Not Qualified			4	CAN ALSO OPERATE WITH -3V TO -5.5V SUPPLY IN NECL MODE	YES	e3		260	12.8 mm		.3 ns
MC10114FN	Onsemi	LINE RECEIVER	OTHER	J BEND	20	QCCJ	SQUARE		PLASTIC/EPOXY	YES		3	ECL			GENERAL PURPOSE	39 mA	DIFFERENTIAL			-5.2	-5.2 V	CHIP CARRIER	LDCC20,.4SQ		Line Driver or Receivers			1.27 mm	85 Cel			-30 Cel		TIN LEAD	QUAD	S-PQCC-J20		4.57 mm	8.965 mm	Not Qualified			3		YES	e0		235	8.965 mm		4 ns
MC10116FN	Onsemi	LINE RECEIVER	OTHER	J BEND	20	QCCJ	SQUARE		PLASTIC/EPOXY	YES		3	ECL10K			GENERAL PURPOSE	23 mA	DIFFERENTIAL SCHMITT TRIGGER			-5.2	-5.2 V	CHIP CARRIER	LDCC20,.4SQ		Line Driver or Receivers			1.27 mm	85 Cel			-30 Cel		TIN LEAD	QUAD	S-PQCC-J20	1	4.57 mm	8.9662 mm	Not Qualified			3			e0	30	235	8.9662 mm		2.9 ns
MC100EP17DT	Onsemi	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	20	TSSOP	RECTANGULAR		PLASTIC/EPOXY	YES	5.5 V	4	ECL		.32 ns	GENERAL PURPOSE		DIFFERENTIAL	3.3 V		-3.0/-5.5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP20,.25		Line Driver or Receivers		3 V	.65 mm	85 Cel			-40 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G20		1.2 mm	4.4 mm	Not Qualified			4	CAN ALSO OPERATE WITH -3V TO -5.5V SUPPLY IN NECL MODE	YES	e4		260	6.5 mm		.32 ns
ST75185CPR	STMicroelectronics	LINE TRANSCEIVER	COMMERCIAL	GULL WING	20	SSOP	RECTANGULAR		PLASTIC/EPOXY	YES	5.5 V	3	BIPOLAR		500 ns	EIA-232-E; TIA-232-E; V.28		SCHMITT TRIGGER	5 V	15 V	5,+-7.5/+-15	-9 V	SMALL OUTLINE, SHRINK PITCH	SSOP20,.3	7.5 V	Line Driver or Receivers	.00001 Amp	4.5 V	.65 mm	70 Cel	9 V		0 Cel	3	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G20		2 mm	5.3 mm	Not Qualified	10 Amp		5	SUPPORT DATA RATES UPTO 120K BITS/S	NO	e4			7.2 mm	6 V	1000 ns
ST75C185BTR	STMicroelectronics	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	20	TSSOP	RECTANGULAR		PLASTIC/EPOXY	YES	5.5 V	3	BICMOS		4000 ns	EIA-232-E		SCHMITT TRIGGER	5 V	13.2 V	5,+-12	-12 V	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP20,.25	7 V	Line Driver or Receivers	.000001 Amp	4.5 V	.65 mm	85 Cel	12 V		-40 Cel	3		DUAL	R-PDSO-G20		1.2 mm	4.4 mm	Not Qualified	3.2 Amp		5		NO				6.5 mm	10 V	4000 ns
ST75C185CDR	STMicroelectronics	LINE TRANSCEIVER	COMMERCIAL	GULL WING	20	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	5.5 V	3	BICMOS		4000 ns	EIA-232-E		SCHMITT TRIGGER	5 V	13.2 V	5,+-12	-12 V	SMALL OUTLINE	SOP20,.4	7 V	Line Driver or Receivers	.000001 Amp	4.5 V	1.27 mm	70 Cel	12 V		0 Cel	3	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G20		2.65 mm	7.5 mm	Not Qualified	3.2 Amp		5		NO	e4			12.8 mm	10 V	4000 ns
ST75C185CN	STMicroelectronics	LINE TRANSCEIVER	COMMERCIAL	THROUGH-HOLE	20	DIP	RECTANGULAR		PLASTIC/EPOXY	NO	5.5 V	3	BICMOS		4000 ns	EIA-232-E		SCHMITT TRIGGER	5 V	13.2 V	5,+-12	-12 V	IN-LINE	DIP20,.3	7 V	Line Driver or Receivers	.000001 Amp	4.5 V	2.54 mm	70 Cel	12 V		0 Cel	3	MATTE TIN	DUAL	R-PDIP-T20		3.93 mm	7.62 mm	Not Qualified	3.2 Amp		5		NO	e3			25.15 mm	10 V	4000 ns
STA1102RQTR	STMicroelectronics	LINE TRANSCEIVER	OTHER	NO LEAD	20	HVQCCN	SQUARE		UNSPECIFIED	YES	3.6 V	1			.4 ns	GENERAL PURPOSE		DIFFERENTIAL	3.3 V				CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE					3 V	.5 mm	85 Cel			0 Cel	1		QUAD	S-XQCC-N20		.8 mm	4 mm	Not Qualified			1		YES				4 mm		.4 ns
ST75C185CTR	STMicroelectronics	LINE TRANSCEIVER	COMMERCIAL	GULL WING	20	TSSOP	RECTANGULAR		PLASTIC/EPOXY	YES	5.5 V	3	BICMOS		4000 ns	EIA-232-E		SCHMITT TRIGGER	5 V	13.2 V	5,+-12	-12 V	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP20,.25	7 V	Line Driver or Receivers	.000001 Amp	4.5 V	.65 mm	70 Cel	12 V		0 Cel	3		DUAL	R-PDSO-G20		1.2 mm	4.4 mm	Not Qualified	3.2 Amp		5		NO				6.5 mm	10 V	4000 ns
STA1102RUTR	STMicroelectronics	LINE TRANSCEIVER	OTHER	NO LEAD	20	HVQCCN	SQUARE		UNSPECIFIED	YES	3.6 V	2			.4 ns	GENERAL PURPOSE		DIFFERENTIAL	3.3 V				CHIP CARRIER					3 V	.5 mm	85 Cel			0 Cel	2	NICKEL PALLADIUM GOLD	QUAD	S-XQCC-N20	1	.8 mm	4 mm	Not Qualified			2		YES	e4	30	260	4 mm		.4 ns
ST3384ECPR	STMicroelectronics	LINE TRANSCEIVER	COMMERCIAL	GULL WING	20	SSOP	RECTANGULAR		PLASTIC/EPOXY	YES	5.5 V	2				EIA-232; TIA-232; V.24; V.28	1 mA	SCHMITT TRIGGER	3.3 V		3.3/5		SMALL OUTLINE, SHRINK PITCH	SSOP20,.3		Line Driver or Receivers		3 V	.65 mm	70 Cel			0 Cel	2	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G20		2 mm	5.3 mm	Not Qualified	2 Amp		2		NO	e4			7.2 mm	5 V	0 ns
ST75C185BN	STMicroelectronics	LINE TRANSCEIVER	INDUSTRIAL	THROUGH-HOLE	20	DIP	RECTANGULAR		PLASTIC/EPOXY	NO	5.5 V	3	BICMOS		4000 ns	EIA-232-E		SCHMITT TRIGGER	5 V	13.2 V	5,+-12	-12 V	IN-LINE	DIP20,.3	7 V	Line Driver or Receivers	.000001 Amp	4.5 V	2.54 mm	85 Cel	12 V		-40 Cel	3	MATTE TIN	DUAL	R-PDIP-T20		3.93 mm	7.62 mm	Not Qualified	3.2 Amp		5		NO	e3			25.15 mm	10 V	4000 ns
ST75C185CDR03	STMicroelectronics	LINE TRANSCEIVER	COMMERCIAL	GULL WING	20	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	5.5 V	3	BICMOS		4000 ns	EIA-232-E		SCHMITT TRIGGER	5 V	13.2 V		-12 V	SMALL OUTLINE		7 V			4.5 V	1.27 mm	70 Cel	12 V		0 Cel	3		DUAL	R-PDSO-G20		2.65 mm	7.5 mm				5		NO				12.8 mm		4000 ns
STSLVDSP27BJR	STMicroelectronics	LINE DRIVER	INDUSTRIAL	BALL	20	VFBGA	RECTANGULAR		PLASTIC/EPOXY	YES	3.6 V	1			2.8 ns	GENERAL PURPOSE		STANDARD	3 V				GRID ARRAY, VERY THIN PROFILE, FINE PITCH					2.5 V	.5 mm	85 Cel			-40 Cel	1		BOTTOM	R-PBGA-B20		1 mm	1.98 mm	Not Qualified					YES		NOT SPECIFIED	NOT SPECIFIED	2.46 mm		0 ns
ST75185CDR	STMicroelectronics	LINE TRANSCEIVER	COMMERCIAL	GULL WING	20	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	5.5 V	3	BIPOLAR		500 ns	EIA-232-E; TIA-232-E; V.28		SCHMITT TRIGGER	5 V	15 V	5,+-7.5/+-15	-9 V	SMALL OUTLINE	SOP20,.4	7.5 V	Line Driver or Receivers	.00001 Amp	4.5 V	1.27 mm	70 Cel	9 V		0 Cel	3	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G20		2.65 mm	7.5 mm	Not Qualified	10 Amp		5	SUPPORT DATA RATES UPTO 120K BITS/S	NO	e4			12.8 mm	6 V	1000 ns
ST3384BPR	STMicroelectronics	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	20	SSOP	RECTANGULAR		PLASTIC/EPOXY	YES	5.5 V	2				EIA-232; TIA-232; V.24; V.28	1 mA	STANDARD	3.3 V		3.3/5		SMALL OUTLINE, SHRINK PITCH	SSOP20,.3		Line Driver or Receivers		3 V	.65 mm	85 Cel			-40 Cel	2	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G20		2 mm	5.3 mm	Not Qualified	2 Amp		2		NO	e4			7.2 mm	10 V	0 ns
ST75C185BD	STMicroelectronics	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	5.5 V	3	BICMOS		4000 ns	EIA-232-E		SCHMITT TRIGGER	5 V	13.2 V	5,+-12	-12 V	SMALL OUTLINE	SOP20,.4	7 V	Line Driver or Receivers	.000001 Amp	4.5 V	1.27 mm	85 Cel	12 V		-40 Cel	3	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G20		2.65 mm	7.5 mm	Not Qualified	3.2 Amp		5		NO	e4			12.8 mm	10 V	4000 ns
L6374FPT	STMicroelectronics	LINE DRIVER	OTHER	GULL WING	20	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	35 V	4			1500 ns	GENERAL PURPOSE		DIFFERENTIAL SCHMITT TRIGGER	24 V		24		SMALL OUTLINE	SOP20,.4		Line Driver or Receivers		10.8 V	1.27 mm	85 Cel			-25 Cel	4		DUAL	R-PDSO-G20		2.65 mm	7.5 mm	Not Qualified					NO				12.8 mm	35 V	0 ns
ST75185CTR	STMicroelectronics	LINE TRANSCEIVER	COMMERCIAL	GULL WING	20	TSSOP	RECTANGULAR		PLASTIC/EPOXY	YES	5.5 V	3	BIPOLAR		500 ns	EIA-232-E; TIA-232-E; V.28		SCHMITT TRIGGER	5 V	15 V	5,+-7.5/+-15	-9 V	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP20,.25	7.5 V	Line Driver or Receivers	.00001 Amp	4.5 V	.65 mm	70 Cel	9 V		0 Cel	3	MATTE TIN	DUAL	R-PDSO-G20	3	1.2 mm	4.4 mm	Not Qualified	10 Amp		5	SUPPORT DATA RATES UPTO 120K BITS/S	NO	e3	30	260	6.5 mm	12 V	1000 ns
74ACT1284M	STMicroelectronics	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	5.5 V	4	CMOS		8.5 ns	IEEE 1284		SCHMITT TRIGGER	5 V				SMALL OUTLINE					4.5 V	1.27 mm	85 Cel			-40 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G20		2.65 mm	7.5 mm	Not Qualified			7		NO	e4			12.8 mm		8.5 ns
ST75C185BDR	STMicroelectronics	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	5.5 V	3	BICMOS		4000 ns	EIA-232-E		SCHMITT TRIGGER	5 V	13.2 V	5,+-12	-12 V	SMALL OUTLINE	SOP20,.4	7 V	Line Driver or Receivers	.000001 Amp	4.5 V	1.27 mm	85 Cel	12 V		-40 Cel	3	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G20		2.65 mm	7.5 mm	Not Qualified	3.2 Amp		5		NO	e4			12.8 mm	10 V	4000 ns
74ACT1284MTR	STMicroelectronics	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	5.5 V	4	CMOS		8.5 ns	IEEE 1284		SCHMITT TRIGGER	5 V				SMALL OUTLINE					4.5 V	1.27 mm	85 Cel			-40 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G20		2.65 mm	7.5 mm	Not Qualified			7		NO	e4			12.8 mm		8.5 ns
ST75185CD	STMicroelectronics	LINE TRANSCEIVER	COMMERCIAL	GULL WING	20	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	5.5 V	3	BIPOLAR		500 ns	EIA-232-E; TIA-232-E; V.28		SCHMITT TRIGGER	5 V	15 V	5,+-7.5/+-15	-9 V	SMALL OUTLINE	SOP20,.4	7.5 V	Line Driver or Receivers	.00001 Amp	4.5 V	1.27 mm	70 Cel	9 V		0 Cel	3	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G20		2.65 mm	7.5 mm	Not Qualified	10 Amp		5	SUPPORT DATA RATES UPTO 120K BITS/S	NO	e4			12.8 mm	6 V	1000 ns
ST75C185CD	STMicroelectronics	LINE TRANSCEIVER	COMMERCIAL	GULL WING	20	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	5.5 V	3	BICMOS		4000 ns	EIA-232-E		SCHMITT TRIGGER	5 V	13.2 V	5,+-12	-12 V	SMALL OUTLINE	SOP20,.4	7 V	Line Driver or Receivers	.000001 Amp	4.5 V	1.27 mm	70 Cel	12 V		0 Cel	3	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G20		2.65 mm	7.5 mm	Not Qualified	3.2 Amp		5		NO	e4			12.8 mm	10 V	4000 ns
ST3384EBPR	STMicroelectronics	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	20	SSOP	RECTANGULAR		PLASTIC/EPOXY	YES	5.5 V	2				EIA-232; TIA-232; V.24; V.28	1 mA	SCHMITT TRIGGER	3.3 V		3.3/5		SMALL OUTLINE, SHRINK PITCH	SSOP20,.3		Line Driver or Receivers		3 V	.65 mm	85 Cel			-40 Cel	2	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G20		2 mm	5.3 mm	Not Qualified	2 Amp		2		NO	e4			7.2 mm	5 V	0 ns
74ACT1284TTR	STMicroelectronics	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	20	TSSOP	RECTANGULAR		PLASTIC/EPOXY	YES	5.5 V	4	CMOS		8.5 ns	IEEE 1284		SCHMITT TRIGGER	5 V				SMALL OUTLINE, THIN PROFILE, SHRINK PITCH					4.5 V	.65 mm	85 Cel			-40 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G20		1.2 mm	4.4 mm	Not Qualified			7		NO	e4			6.5 mm		8.5 ns
ST3384CPR	STMicroelectronics	LINE TRANSCEIVER	COMMERCIAL	GULL WING	20	SSOP	RECTANGULAR		PLASTIC/EPOXY	YES	5.5 V	2				EIA-232; TIA-232; V.24; V.28	1 mA	STANDARD	3.3 V		3.3/5		SMALL OUTLINE, SHRINK PITCH	SSOP20,.3		Line Driver or Receivers		3 V	.65 mm	70 Cel			0 Cel	2	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G20		2 mm	5.3 mm	Not Qualified	2 Amp		2		NO	e4			7.2 mm	10 V	0 ns
ST75185CN	STMicroelectronics	LINE TRANSCEIVER	COMMERCIAL	THROUGH-HOLE	20	DIP	RECTANGULAR		PLASTIC/EPOXY	NO	5.5 V	3	BIPOLAR		500 ns	EIA-232-E; TIA-232-E; V.28		SCHMITT TRIGGER	5 V	15 V	5,+-7.5/+-15	-12 V	IN-LINE	DIP20,.3	7.5 V	Line Driver or Receivers	.00001 Amp	4.5 V	2.54 mm	70 Cel	12 V		0 Cel	3	MATTE TIN	DUAL	R-PDIP-T20		3.93 mm	7.62 mm	Not Qualified	10 Amp		5	SUPPORT DATA RATESUPTO120 KBPS	NO	e3			25.15 mm	6 V	1000 ns
L6374DP	STMicroelectronics	LINE DRIVER	OTHER	THROUGH-HOLE	20	DIP	RECTANGULAR		PLASTIC/EPOXY	NO	35 V	4			1500 ns	GENERAL PURPOSE	5 mA	DIFFERENTIAL SCHMITT TRIGGER	24 V		24		IN-LINE	DIP20,.3		Line Driver or Receivers		10.8 V	2.54 mm	85 Cel		TOTEM-POLE	-25 Cel	4	MATTE TIN	DUAL	R-PDIP-T20		5.1 mm	7.62 mm	Not Qualified		TRUE			NO	e3				35 V	0 ns
ST3222CTR	STMicroelectronics	LINE TRANSCEIVER	COMMERCIAL	GULL WING	20	TSSOP	RECTANGULAR		PLASTIC/EPOXY	YES	3.6 V	2				EIA-232; TIA-232; V.24; V.28	1 mA	SCHMITT TRIGGER	3.3 V		3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP20,.25		Line Driver or Receivers		3 V	.65 mm	70 Cel			0 Cel	2	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G20	3	1.2 mm	4.4 mm	Not Qualified	1.6 Amp		2		NO	e4	40	260	6.5 mm	10 V	0 ns
ST3222ECTR	STMicroelectronics	LINE TRANSCEIVER	COMMERCIAL	GULL WING	20	TSSOP	RECTANGULAR		PLASTIC/EPOXY	YES	5.5 V	2				EIA-232; TIA-232; V.24; V.28	1 mA	SCHMITT TRIGGER	3.3 V		3.3/5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP20,.25		Line Driver or Receivers	.000001 Amp	3 V	.65 mm	70 Cel			0 Cel	2	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G20	3	1.2 mm	4.4 mm	Not Qualified	1.6 Amp		2		NO	e4	40	260	6.5 mm	10 V	0 ns
5962F9865108V9X	STMicroelectronics	LINE DRIVER	MILITARY	NO LEAD	20	DIE	SQUARE	300k Rad(Si)	UNSPECIFIED	YES	3.6 V	4	CMOS	MIL-PRF-38535 Class V	3.5 ns	GENERAL PURPOSE	35 mA	STANDARD	3.3 V				UNCASED CHIP	DIE OR CHIP			.00001 Amp	3 V		125 Cel		DIFFERENTIAL	-55 Cel	4		UPPER	S-XUUC-N20				Qualified					YES					.25 V
5962F9865107V9X	STMicroelectronics	LINE DRIVER	MILITARY	NO LEAD	20	DIE	SQUARE	300k Rad(Si)	UNSPECIFIED	YES	3.6 V	4	CMOS	MIL-PRF-38535 Class V	1.5 ns	GENERAL PURPOSE	20 mA	STANDARD	3.3 V				UNCASED CHIP	DIE OR CHIP			.00001 Amp	3 V		125 Cel		DIFFERENTIAL	-55 Cel	4		UPPER	S-XUUC-N20				Qualified					YES					.25 V
ST3222ECDR	STMicroelectronics	LINE TRANSCEIVER	COMMERCIAL	GULL WING	20	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	5.5 V	2				EIA-232; TIA-232; V.24; V.28	1 mA	SCHMITT TRIGGER	3.3 V		3.3/5		SMALL OUTLINE	SOP18,.4		Line Driver or Receivers	.000001 Amp	3 V	1.27 mm	70 Cel			0 Cel	2	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G20		2.65 mm	7.5 mm	Not Qualified	1.6 Amp		2		NO	e4			11.55 mm	10 V	0 ns
5962F9865108V9A	STMicroelectronics	LINE DRIVER	MILITARY	NO LEAD	20	DIE	SQUARE	300k Rad(Si)	UNSPECIFIED	YES	3.6 V	4	CMOS	MIL-PRF-38535 Class V	3.5 ns	GENERAL PURPOSE	35 mA	STANDARD	3.3 V				UNCASED CHIP	DIE OR CHIP			.00001 Amp	3 V		125 Cel		DIFFERENTIAL	-55 Cel	4		UPPER	S-XUUC-N20				Qualified					YES					.25 V

Line Drivers & Receivers

Line drivers and receivers are electronic components that are used to transmit and receive data signals over long distances. They are commonly used in industrial and commercial applications that require reliable and high-speed data transmission.

Line drivers are electronic components that amplify signals and provide the necessary voltage and current to drive the transmission line. They are used to ensure that the data signal maintains its integrity and strength as it travels through the transmission line.

Line receivers are electronic components that are used to receive the data signal and convert it back to a usable form. They typically include a differential amplifier and a threshold detector to ensure that the received signal is of sufficient quality and strength to be used by the receiving device.

Line drivers and receivers can be classified into several types based on their specific applications and characteristics. Some of the most common types of line drivers and receivers include RS-232, RS-422, and RS-485.