28 Line Drivers & Receivers 2,129

Reset All

Part	Manufacturer	Interface IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	Maximum Supply Voltage	No. of Functions	No. of Channels	Technology	Maximum Transmit Delay	Interface Standard	Maximum Supply Current	Input Characteristics	Nominal Supply Voltage	Maximum Supply Voltage-1	Power Supplies (V)	Nominal Negative Supply Voltage	Package Style (Meter)	Package Equivalence Code	Minimum Supply Voltage-1	Sub-Category	Maximum High Level Input Current	Minimum Supply Voltage	Terminal Pitch	Maximum Operating Temperature	Nominal Supply Voltage-1	Output Characteristics	Minimum Operating Temperature	Driver No. of Bits	Terminal Finish	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Seated Height	Width	Qualification	Maximum Output Low Current	Output Polarity	Receiver No. of Bits	Additional Features	Differential Output	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Minimum Out Swing	Maximum Receive Delay
UC5170CJ	Texas Instruments	LINE DRIVER	COMMERCIAL	THROUGH-HOLE	28	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	15 V	8		CMOS		EIA232-E; EIA423-A; V.10; V.28; X.26		STANDARD	10 V			-10 V	IN-LINE					9 V	2.54 mm	70 Cel			0 Cel	8		DUAL	R-GDIP-T28		4.91 mm	15.24 mm	Not Qualified					NO				36.83 mm
UC5170CQTR	Texas Instruments	LINE DRIVER	COMMERCIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	15 V	8		CMOS		EIA232-E; EIA423-A; V.10; V.28; X.26		STANDARD	10 V		+-10	-10 V	CHIP CARRIER	LDCC28,.5SQ		Line Driver or Receivers	.00004 Amp	9 V	1.27 mm	70 Cel		3-STATE	0 Cel	8	NICKEL PALLADIUM GOLD	QUAD	S-PQCC-J28	3	4.57 mm	11.505 mm	Not Qualified					NO	e4	30	260	11.505 mm	9 V	0 ns
UC5180CN	Texas Instruments	LINE RECEIVER	COMMERCIAL	THROUGH-HOLE	28	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	7 V	8		BIPOLAR		EIA232-E; EIA422-A; EIA423-A; V.10; V.11; V.28; X.26; X.27	35 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		IN-LINE	DIP28,.6		Line Driver or Receivers		3 V	2.54 mm	70 Cel			0 Cel			DUAL	R-PDIP-T28				Not Qualified	8 Amp		1		NO						550 ns
DRV604PWPR	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	28	HTSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.7 V	4	4			GENERAL PURPOSE	35 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.7 V	3.3		SMALL OUTLINE	TSSOP28,.25	3 V	Line Driver or Receivers	.000001 Amp	3 V	.65 mm	85 Cel	3.3 V		-40 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G28	3	1.2 mm	4.4 mm	Not Qualified		TRUE			NO	e4	30	260	9.7 mm	6.15 V	0 ns
UC5170CQ	Texas Instruments	LINE DRIVER	COMMERCIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	15 V	8		CMOS		EIA232-E; EIA423-A; V.10; V.28; X.26		STANDARD	10 V		+-10	-10 V	CHIP CARRIER	LDCC28,.5SQ		Line Driver or Receivers	.00004 Amp	9 V	1.27 mm	70 Cel		3-STATE	0 Cel	8	NICKEL PALLADIUM GOLD	QUAD	S-PQCC-J28	3	4.57 mm	11.505 mm	Not Qualified					NO	e4	30	260	11.505 mm	9 V	0 ns
UC5181CQ	Texas Instruments	LINE RECEIVER	COMMERCIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	5.25 V	8		BIPOLAR		EIA-232-E; V.10; V.11; V.28; X.26; X.27; EIA-422-A; EIA-423-A	35 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		CHIP CARRIER	LDCC28,.5SQ		Line Driver or Receivers		4.75 V	1.27 mm	70 Cel			0 Cel		NICKEL PALLADIUM GOLD	QUAD	S-PQCC-J28	3	4.57 mm	11.505 mm	Not Qualified	8 Amp		8		NO	e4	30	260	11.505 mm		120 ns
UC5181CQTR	Texas Instruments	LINE RECEIVER	COMMERCIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	5.25 V	8		BIPOLAR		EIA-232-E; V.10; V.11; V.28; X.26; X.27; EIA-422-A; EIA-423-A	35 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		CHIP CARRIER	LDCC28,.5SQ		Line Driver or Receivers		4.75 V	1.27 mm	70 Cel			0 Cel			QUAD	S-PQCC-J28		4.57 mm	11.505 mm	Not Qualified	8 Amp		8		NO		NOT SPECIFIED	NOT SPECIFIED	11.505 mm		120 ns
DS92LV1021AMSAX	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1		CMOS		GENERAL PURPOSE	55 mA	STANDARD	3.3 V		3.3		SMALL OUTLINE, SHRINK PITCH	SSOP28,.3		Line Driver or Receivers		3 V	.65 mm	85 Cel			-40 Cel	1	TIN LEAD	DUAL	R-PDSO-G28	1	2 mm	5.29 mm	Not Qualified					YES	e0	20	235	10.2 mm		0 ns
DS92LV1224TMSA/NOPB	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1		CMOS		GENERAL PURPOSE	110 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V		3.3		SMALL OUTLINE, SHRINK PITCH	SSOP28,.3		Line Driver or Receivers		3 V	.65 mm	85 Cel			-40 Cel		MATTE TIN	DUAL	R-PDSO-G28	3	2 mm	5.29 mm	Not Qualified			1			e3	30	260	10.2 mm		0 ns
DS92LV1212AMSAX	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1		CMOS		GENERAL PURPOSE	75 mA	STANDARD	3.3 V		3.3		SMALL OUTLINE, SHRINK PITCH	SSOP28,.3		Line Driver or Receivers		3 V	.65 mm	85 Cel			-40 Cel		TIN LEAD	DUAL	R-PDSO-G28	1	2 mm	5.29 mm	Not Qualified			1		YES	e0	20	235	10.2 mm		0 ns
DS92LV1023EMQX	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1		CMOS		GENERAL PURPOSE	90 mA	STANDARD	3.3 V		3.3		SMALL OUTLINE, SHRINK PITCH	SSOP28,.3		Line Driver or Receivers		3 V	.65 mm	85 Cel			-40 Cel	1	TIN LEAD	DUAL	R-PDSO-G28	1	2 mm	5.3 mm	Not Qualified					YES	e0	20	235	10.2 mm		0 ns
MAXT3238PW	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	28	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1				EIA-232-F; V.28		SCHMITT TRIGGER	3.3 V				SMALL OUTLINE, THIN PROFILE, SHRINK PITCH					3 V	.65 mm	70 Cel			0 Cel	5		DUAL	R-PDSO-G28		1.2 mm	4.4 mm	Not Qualified			3		NO				9.7 mm		0 ns
UC5172QTR	Texas Instruments	LINE DRIVER	COMMERCIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	15 V	8		BIPOLAR		EIA232-E; EIA423-A; V.10; V.28; X.26		STANDARD	10 V		+-10	-10 V	CHIP CARRIER	LDCC28,.5SQ		Line Driver or Receivers	.00004 Amp	9 V	1.27 mm	70 Cel		3-STATE	0 Cel	1		QUAD	S-PQCC-J28		4.57 mm	11.505 mm	Not Qualified					NO		NOT SPECIFIED	NOT SPECIFIED	11.505 mm	9 V	0 ns
UC5170CN	Texas Instruments	LINE DRIVER	COMMERCIAL	THROUGH-HOLE	28	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	15 V	8		CMOS		EIA232-E; EIA423-A; V.10; V.28; X.26		STANDARD	10 V		+-10	-10 V	IN-LINE	DIP28,.6		Line Driver or Receivers	.00004 Amp	9 V	2.54 mm	70 Cel		3-STATE	0 Cel	8		DUAL	R-PDIP-T28		4.91 mm	15.24 mm	Not Qualified					NO		NOT SPECIFIED	NOT SPECIFIED	36.83 mm	9 V	0 ns
DS92LV1210TMSA	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1		CMOS		GENERAL PURPOSE		DIFFERENTIAL	3.3 V				SMALL OUTLINE, SHRINK PITCH					3 V	.65 mm	85 Cel			-40 Cel			DUAL	R-PDSO-G28		2 mm	5.3 mm				1		NO				10.2 mm		10 ns
MAXT3243DB	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1				EIA-232-F; V.28		SCHMITT TRIGGER	3.3 V				SMALL OUTLINE, SHRINK PITCH					3 V	.65 mm	70 Cel			0 Cel	3		DUAL	R-PDSO-G28		2 mm	5.3 mm	Not Qualified			5		NO				10.2 mm
DS92LV1023EMQ	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1		CMOS		GENERAL PURPOSE	90 mA	STANDARD	3.3 V		3.3		SMALL OUTLINE, SHRINK PITCH	SSOP28,.3		Line Driver or Receivers		3 V	.65 mm	85 Cel			-40 Cel	1	TIN LEAD	DUAL	R-PDSO-G28	1	2 mm	5.3 mm	Not Qualified					YES	e0	20	235	10.2 mm		0 ns
MAXT3238DW	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	28	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1				EIA-232-F; V.28		SCHMITT TRIGGER	3.3 V				SMALL OUTLINE					3 V	1.27 mm	70 Cel			0 Cel	5		DUAL	R-PDSO-G28		2.65 mm	7.5 mm	Not Qualified			3		NO				17.9 mm		0 ns
MAXT3243PW	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	28	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1				EIA-232-F; V.28		SCHMITT TRIGGER	3.3 V				SMALL OUTLINE, THIN PROFILE, SHRINK PITCH					3 V	.65 mm	70 Cel			0 Cel	3		DUAL	R-PDSO-G28		1.2 mm	4.4 mm	Not Qualified			5		NO				9.7 mm
DS92LV1023TMSA	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES		1		CMOS			90 mA		3.3 V		3.3		SMALL OUTLINE, SHRINK PITCH	SSOP28,.3		Line Driver or Receivers			.635 mm	85 Cel			-40 Cel	1	TIN LEAD	DUAL	R-PDSO-G28	1			Not Qualified						e0	20	235			0 ns
UC5171QTR	Texas Instruments	LINE DRIVER	COMMERCIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	15 V	8				EIA232-E; EIA423-A; V.10; V.28; X.26		STANDARD	10 V		+-10	-10 V	CHIP CARRIER	LDCC28,.5SQ		Line Driver or Receivers	.00004 Amp	9 V	1.27 mm	70 Cel		3-STATE	0 Cel	1		QUAD	S-PQCC-J28		4.57 mm	11.505 mm	Not Qualified					NO		NOT SPECIFIED	NOT SPECIFIED	11.505 mm	9 V	0 ns
DS92LV1023EMQ/NOPB	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1		CMOS		GENERAL PURPOSE	90 mA	STANDARD	3.3 V		3.3		SMALL OUTLINE, SHRINK PITCH	SSOP28,.3		Line Driver or Receivers		3 V	.65 mm	85 Cel			-40 Cel	1	MATTE TIN	DUAL	R-PDSO-G28	3	2 mm	5.3 mm	Not Qualified					YES	e3	30	260	10.2 mm		0 ns
UC5181CN	Texas Instruments	LINE RECEIVER	COMMERCIAL	THROUGH-HOLE	28	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.25 V	8		BIPOLAR		EIA-232-E; V.10; V.11; V.28; X.26; X.27; EIA-422-A; EIA-423-A	35 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		IN-LINE	DIP28,.6		Line Driver or Receivers		4.75 V	2.54 mm	70 Cel			0 Cel			DUAL	R-PDIP-T28		5.08 mm	15.24 mm	Not Qualified	8 Amp		8		NO				36.32 mm		120 ns
DS92LV1224TMSAX	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1		CMOS		GENERAL PURPOSE	110 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V		3.3		SMALL OUTLINE, SHRINK PITCH	SSOP28,.3		Line Driver or Receivers		3 V	.65 mm	85 Cel			-40 Cel		TIN LEAD	DUAL	R-PDSO-G28	1	2 mm	5.29 mm	Not Qualified			1			e0	20	235	10.2 mm		0 ns
DS92LV1224TMSA	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1		CMOS		GENERAL PURPOSE	110 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V		3.3		SMALL OUTLINE, SHRINK PITCH	SSOP28,.3		Line Driver or Receivers		3 V	.65 mm	85 Cel			-40 Cel		TIN LEAD	DUAL	R-PDSO-G28	1	2 mm	5.29 mm	Not Qualified			1			e0	20	235	10.2 mm		0 ns
DS92LV1023TMSAX	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1		CMOS		GENERAL PURPOSE	90 mA	STANDARD	3.3 V		3.3		SMALL OUTLINE, SHRINK PITCH	SSOP28,.3		Line Driver or Receivers		3 V	.65 mm	85 Cel			-40 Cel	1	TIN LEAD	DUAL	R-PDSO-G28	1	2 mm	5.29 mm	Not Qualified					YES	e0	20	235	10.2 mm		0 ns
UC5172N	Texas Instruments	LINE DRIVER	COMMERCIAL	THROUGH-HOLE	28	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	15 V	8		BIPOLAR		EIA232-E; EIA423-A; V.10; V.28; X.26		STANDARD	10 V		+-10	-10 V	IN-LINE	DIP28,.6		Line Driver or Receivers	.00004 Amp	9 V	2.54 mm	70 Cel		3-STATE	0 Cel	1		DUAL	R-PDIP-T28				Not Qualified					NO					9 V	0 ns
MAXT3243DW	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	28	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1				EIA-232-F; V.28		SCHMITT TRIGGER	3.3 V				SMALL OUTLINE					3 V	1.27 mm	70 Cel			0 Cel	3		DUAL	R-PDSO-G28		2.65 mm	7.5 mm	Not Qualified			5		NO				17.9 mm
DS92LV1021TMSAX	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1		CMOS		GENERAL PURPOSE	55 mA	STANDARD	3.3 V		3.3		SMALL OUTLINE, SHRINK PITCH	SSOP28,.3		Line Driver or Receivers		3 V	.65 mm	85 Cel			-40 Cel	1	TIN LEAD	DUAL	R-PDSO-G28	1	2 mm	5.29 mm	Not Qualified					YES	e0	20	235	10.2 mm		0 ns
DS92LV1212AMSA	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1		CMOS		GENERAL PURPOSE	75 mA	STANDARD	3.3 V		3.3		SMALL OUTLINE, SHRINK PITCH	SSOP28,.3		Line Driver or Receivers		3 V	.65 mm	85 Cel			-40 Cel		TIN LEAD	DUAL	R-PDSO-G28	1	2 mm	5.29 mm	Not Qualified			1		YES	e0	20	235	10.2 mm		0 ns
DS92LV1023EMQX/NOPB	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1		CMOS		GENERAL PURPOSE	90 mA	STANDARD	3.3 V		3.3		SMALL OUTLINE, SHRINK PITCH	SSOP28,.3		Line Driver or Receivers		3 V	.65 mm	85 Cel			-40 Cel	1	MATTE TIN	DUAL	R-PDSO-G28	3	2 mm	5.3 mm	Not Qualified					YES	e3	30	260	10.2 mm		0 ns
DRV604PWP	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	28	HTSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.7 V	4	4			GENERAL PURPOSE	35 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.7 V	3.3		SMALL OUTLINE	TSSOP28,.25	3 V	Line Driver or Receivers	.000001 Amp	3 V	.65 mm	85 Cel	3.3 V		-40 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G28	3	1.2 mm	4.4 mm	Not Qualified		TRUE			NO	e4	30	260	9.7 mm	6.15 V	0 ns
UC5171N	Texas Instruments	LINE DRIVER	COMMERCIAL	THROUGH-HOLE	28	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	15 V	8		BIPOLAR		EIA232-E; EIA423-A; V.10; V.28; X.26		STANDARD	10 V		+-10	-10 V	IN-LINE	DIP28,.6		Line Driver or Receivers	.00004 Amp	9 V	2.54 mm	70 Cel		3-STATE	0 Cel	1		DUAL	R-PDIP-T28				Not Qualified					NO		NOT SPECIFIED	NOT SPECIFIED		9 V	0 ns
UC5180CQTR	Texas Instruments	LINE RECEIVER	COMMERCIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	5.25 V	8		BIPOLAR		EIA232-E; EIA422-A; EIA423-A; V.10; V.11; V.28; X.26; X.27	35 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		CHIP CARRIER	LDCC28,.5SQ		Line Driver or Receivers		4.75 V	1.27 mm	70 Cel			0 Cel		NICKEL PALLADIUM GOLD	QUAD	S-PQCC-J28	3	4.57 mm	11.505 mm	Not Qualified	8 Amp		8		NO	e4	30	260	11.505 mm		550 ns
DS92LV1021AMSA	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1		CMOS		GENERAL PURPOSE	55 mA	STANDARD	3.3 V		3.3		SMALL OUTLINE, SHRINK PITCH	SSOP28,.3		Line Driver or Receivers		3 V	.65 mm	85 Cel			-40 Cel	1	TIN LEAD	DUAL	R-PDSO-G28	1	2 mm	5.29 mm	Not Qualified					YES	e0	20	235	10.2 mm		0 ns
UC5180CJ	Texas Instruments	LINE RECEIVER	COMMERCIAL	THROUGH-HOLE	28	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	5.25 V	8		BIPOLAR		EIA232-E; EIA422-A; EIA423-A; V.10; V.11; V.28; X.26; X.27	35 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		IN-LINE	DIP28,.6		Line Driver or Receivers		4.75 V	2.54 mm	70 Cel			0 Cel			DUAL	R-GDIP-T28		5.08 mm	7.62 mm	Not Qualified	8 Amp		8		NO		NOT SPECIFIED	NOT SPECIFIED			550 ns
DS92LV1212TMSA	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1				GENERAL PURPOSE		DIFFERENTIAL	3.3 V				SMALL OUTLINE, SHRINK PITCH					3 V	.65 mm	85 Cel			-40 Cel		TIN LEAD	DUAL	R-PDSO-G28	1	2 mm	5.29 mm				10	SEATED HGT-NOM	NO	e0	20	235	10.2 mm
DS92LV1021TMSAX/NOPB	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1		CMOS		GENERAL PURPOSE	55 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V		3.3		SMALL OUTLINE, SHRINK PITCH	SSOP28,.3		Line Driver or Receivers		3 V	.65 mm	85 Cel			-40 Cel	1	MATTE TIN	DUAL	R-PDSO-G28	3	2 mm	5.29 mm	Not Qualified					YES	e3	30	260	10.2 mm		0 ns
UC5171Q	Texas Instruments	LINE DRIVER	COMMERCIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	15 V	8		BIPOLAR		EIA232-E; EIA423-A; V.10; V.28; X.26		STANDARD	10 V		+-10	-10 V	CHIP CARRIER	LDCC28,.5SQ		Line Driver or Receivers	.00004 Amp	9 V	1.27 mm	70 Cel		3-STATE	0 Cel	1		QUAD	S-PQCC-J28		4.57 mm	11.505 mm	Not Qualified					NO		NOT SPECIFIED	NOT SPECIFIED	11.505 mm	9 V	0 ns
MAXT3238DB	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1				EIA-232-F; V.28		SCHMITT TRIGGER	3.3 V				SMALL OUTLINE, SHRINK PITCH					3 V	.65 mm	70 Cel			0 Cel	5		DUAL	R-PDSO-G28		2 mm	5.3 mm	Not Qualified			3		NO				10.2 mm		0 ns
DS92LV1021TMSA	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1		CMOS	10 ns	GENERAL PURPOSE	55 mA	STANDARD	3.3 V		3.3		SMALL OUTLINE, SHRINK PITCH	SSOP28,.3		Line Driver or Receivers		3 V	.65 mm	85 Cel			-40 Cel	1	TIN LEAD	DUAL	R-PDSO-G28	1	2 mm	5.3 mm	Not Qualified					YES	e0	20	235	10.2 mm		0 ns
UC5180CQ	Texas Instruments	LINE RECEIVER	COMMERCIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	7 V	8		BIPOLAR		EIA232-E; EIA422-A; EIA423-A; V.10; V.11; V.28; X.26; X.27	35 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		CHIP CARRIER	LDCC28,.5SQ		Line Driver or Receivers		3 V	1.27 mm	70 Cel			0 Cel		NICKEL PALLADIUM GOLD	QUAD	S-PQCC-J28	3	4.57 mm	11.505 mm	Not Qualified	8 Amp		1		NO	e4	30	260	11.505 mm		550 ns
DS92LV1224TMSAX/NOPB	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1		CMOS		GENERAL PURPOSE	110 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V		3.3		SMALL OUTLINE, SHRINK PITCH	SSOP28,.3		Line Driver or Receivers		3 V	.65 mm	85 Cel			-40 Cel	1	MATTE TIN	DUAL	R-PDSO-G28	3	2 mm	5.29 mm	Not Qualified			1			e3	30	260	10.2 mm		0 ns
UC5172Q	Texas Instruments	LINE DRIVER	COMMERCIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	15 V	8		BIPOLAR		EIA232-E; EIA423-A; V.10; V.28; X.26		STANDARD	10 V		+-10	-10 V	CHIP CARRIER	LDCC28,.5SQ		Line Driver or Receivers	.00004 Amp	9 V	1.27 mm	70 Cel		3-STATE	0 Cel	1	TIN LEAD	QUAD	S-PQCC-J28	2	4.57 mm	11.505 mm	Not Qualified					NO	e0			11.505 mm	9 V	0 ns
DS92LV1021TMSA/NOPB	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1		CMOS		GENERAL PURPOSE	55 mA	STANDARD	3.3 V		3.3		SMALL OUTLINE, SHRINK PITCH	SSOP28,.3		Line Driver or Receivers		3 V	.65 mm	85 Cel			-40 Cel	1	MATTE TIN	DUAL	R-PDSO-G28	3	2 mm	5.3 mm	Not Qualified					YES	e3	30	260	10.2 mm		0 ns
AFE1224E/1KG4	Texas Instruments		INDUSTRIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES				CMOS							3.3/5,5		SMALL OUTLINE, SHRINK PITCH	SSOP28,.3		Line Driver or Receivers			.635 mm	85 Cel			-40 Cel			DUAL	R-PDSO-G28				Not Qualified
TRS3243ECDB	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	3				EIA-232-F; TIA-232-F	1 mA	SCHMITT TRIGGER	3.3 V	3.6 V	3.3/5		SMALL OUTLINE, SHRINK PITCH	SSOP28,.3	3 V	Line Driver or Receivers	.000001 Amp	3 V	.65 mm	70 Cel	3.3 V		0 Cel	3	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G28	1	2 mm	5.3 mm	Not Qualified	.001 Amp	INVERTED	5		NO	e4	NOT SPECIFIED	260	10.2 mm	10 V	0 ns
SN75C3243DWE4	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	28	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	3		CMOS		EIA-232	1 mA	SCHMITT TRIGGER	3.3 V		3.3/5		SMALL OUTLINE	SOP28,.4		Line Driver or Receivers	.000001 Amp	3 V	1.27 mm	70 Cel			0 Cel	3	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G28	1	2.65 mm	7.5 mm	Not Qualified	1.6 Amp		5	ALSO OPERATES AT 5V SUPPLY	NO	e4	30	260	17.9 mm	10 V	0 ns

Line Drivers & Receivers

Line drivers and receivers are electronic components that are used to transmit and receive data signals over long distances. They are commonly used in industrial and commercial applications that require reliable and high-speed data transmission.

Line drivers are electronic components that amplify signals and provide the necessary voltage and current to drive the transmission line. They are used to ensure that the data signal maintains its integrity and strength as it travels through the transmission line.

Line receivers are electronic components that are used to receive the data signal and convert it back to a usable form. They typically include a differential amplifier and a threshold detector to ensure that the received signal is of sufficient quality and strength to be used by the receiving device.

Line drivers and receivers can be classified into several types based on their specific applications and characteristics. Some of the most common types of line drivers and receivers include RS-232, RS-422, and RS-485.