36 Line Drivers & Receivers 80

Reset All

Part	Manufacturer	Interface IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	Maximum Supply Voltage	No. of Functions	No. of Channels	Technology	Screening Level	Maximum Transmit Delay	Interface Standard	Maximum Supply Current	Input Characteristics	Nominal Supply Voltage	Maximum Supply Voltage-1	Power Supplies (V)	Nominal Negative Supply Voltage	Package Style (Meter)	Package Equivalence Code	Minimum Supply Voltage-1	Sub-Category	Maximum High Level Input Current	Minimum Supply Voltage	Terminal Pitch	Maximum Operating Temperature	Nominal Supply Voltage-1	Output Characteristics	Minimum Operating Temperature	Driver No. of Bits	Terminal Finish	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Seated Height	Width	Qualification	Output Polarity	Receiver No. of Bits	Differential Output	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Maximum Receive Delay
TUSB1211A1ZRQR	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	BALL	36	VFBGA	SQUARE	PLASTIC/EPOXY	YES	4.8 V	1					GENERAL PURPOSE		STANDARD	3.6 V	4.8 V	3.6		GRID ARRAY, VERY THIN PROFILE, FINE PITCH	BGA36,6X6,20	2.7 V	Line Driver or Receivers		2.7 V	.5 mm	85 Cel	3.6 V		-40 Cel	1	TIN SILVER COPPER	BOTTOM	S-PBGA-B36	2	1 mm	3.5 mm	Not Qualified		1	NO	e1	30	260	3.5 mm	0 ns
DS25MB100TSQ/NOPB	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	36	HVQCCN	SQUARE	UNSPECIFIED	YES	3.465 V	1								3.3 V	3.465 V	3.3		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC36,.25SQ,20	3.15 V	Line Driver or Receivers	.00001 Amp	3.135 V	.5 mm	85 Cel	3.3 V	DIFFERENTIAL	-40 Cel		MATTE TIN	QUAD	S-XQCC-N36	3			Not Qualified	COMPLEMENTARY	1	YES	e3	30	260		0 ns
LTC2846CG#TRPBF	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	GULL WING	36	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES		3				2500 ns	EIA-232; V.10; V.11; V.28; V.35; V.36; X.21; EIA-422; EIA-423; EIA-449; EIA-530; EIA-530-A		DIFFERENTIAL SCHMITT TRIGGER	5 V				SMALL OUTLINE, SHRINK PITCH						.65 mm	70 Cel			0 Cel	3	MATTE TIN	DUAL	R-PDSO-G36	1	2 mm	5.3 mm	Not Qualified		3	YES	e3	30	260	12.8 mm	300 ns
LTC2846IG#PBF	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	36	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES		3				2500 ns	EIA-232; V.10; V.11; V.28; V.35; V.36; X.21; EIA-422; EIA-423; EIA-449; EIA-530; EIA-530-A		DIFFERENTIAL SCHMITT TRIGGER	5 V				SMALL OUTLINE, SHRINK PITCH						.65 mm	85 Cel			-40 Cel	3	MATTE TIN	DUAL	R-PDSO-G36	1	2 mm	5.3 mm	Not Qualified		3	YES	e3	30	260	12.8 mm	300 ns
DS92LV0411SQ	Texas Instruments	LINE DRIVER		NO LEAD	36		SQUARE	UNSPECIFIED	YES														CHIP CARRIER													QUAD	S-XQCC-N36				Not Qualified
DS92LV0411SQE/NOPB	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	36	VQCCN	SQUARE	UNSPECIFIED	YES	1.89 V	4					GENERAL PURPOSE	90 mA	STANDARD	1.8 V	3.6 V	1.8,3.3		CHIP CARRIER, VERY THIN PROFILE	LCC36,.25SQ,20	3 V	Line Driver or Receivers		1.71 V	.5 mm	85 Cel	3.3 V	3-STATE	-40 Cel	1	MATTE TIN	QUAD	S-XQCC-N36	3	.8 mm	6 mm	Not Qualified	COMPLEMENTARY		YES	e3	30	260	6 mm	0 ns
DS92LV0411SQ/NOPB	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	36	VQCCN	SQUARE	UNSPECIFIED	YES	1.89 V	4					GENERAL PURPOSE	90 mA	STANDARD	1.8 V	3.6 V	1.8,3.3		CHIP CARRIER, VERY THIN PROFILE	LCC36,.25SQ,20	3 V	Line Driver or Receivers		1.71 V	.5 mm	85 Cel	3.3 V	3-STATE	-40 Cel	1	MATTE TIN	QUAD	S-XQCC-N36	3	.8 mm	6 mm	Not Qualified	COMPLEMENTARY		YES	e3	30	260	6 mm	0 ns
DS99R421ISQ	Texas Instruments	LINE RECEIVER	INDUSTRIAL	NO LEAD	36	HVQCCN	SQUARE	UNSPECIFIED	YES	3.6 V	1					GENERAL PURPOSE		DIFFERENTIAL	3.3 V				CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE					3 V	.5 mm	105 Cel			-40 Cel		TIN LEAD	QUAD	S-XQCC-N36	3	.8 mm	6 mm	Not Qualified		3	YES	e0			6 mm
DS99R421ISQ/NOPB	Texas Instruments	LINE RECEIVER	INDUSTRIAL	NO LEAD	36	HVQCCN	SQUARE	UNSPECIFIED	YES	3.6 V	3			AEC-Q100		ISO 10605	130 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.6 V	3.3		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC36,.25SQ,20	3 V	Line Driver or Receivers		3 V	.5 mm	105 Cel	3.3 V	3-STATE	-40 Cel		MATTE TIN	QUAD	S-XQCC-N36	3	.8 mm	6 mm	Not Qualified	TRUE	3	NO	e3	30	260	6 mm	0 ns
DS99R421QSQX	Texas Instruments	LINE RECEIVER	INDUSTRIAL	NO LEAD	36	HVQCCN	SQUARE	UNSPECIFIED	YES	3.6 V	1					GENERAL PURPOSE		DIFFERENTIAL	3.3 V				CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE					3 V	.5 mm	105 Cel			-40 Cel		TIN LEAD	QUAD	S-XQCC-N36	3	.8 mm	6 mm	Not Qualified		3	YES	e0			6 mm
DS92LV0411SQX/NOPB	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	36	VQCCN	SQUARE	UNSPECIFIED	YES	1.89 V	4					GENERAL PURPOSE	90 mA	STANDARD	1.8 V	3.6 V	1.8,3.3		CHIP CARRIER, VERY THIN PROFILE	LCC36,.25SQ,20	3 V	Line Driver or Receivers		1.71 V	.5 mm	85 Cel	3.3 V	3-STATE	-40 Cel	1	MATTE TIN	QUAD	S-XQCC-N36	3	.8 mm	6 mm	Not Qualified	COMPLEMENTARY		YES	e3	30	260	6 mm	0 ns
DS99R421ISQX	Texas Instruments	LINE RECEIVER	INDUSTRIAL	NO LEAD	36	HVQCCN	SQUARE	UNSPECIFIED	YES	3.6 V	1					GENERAL PURPOSE		DIFFERENTIAL	3.3 V				CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE					3 V	.5 mm	105 Cel			-40 Cel		TIN LEAD	QUAD	S-XQCC-N36	3	.8 mm	6 mm	Not Qualified		3	YES	e0			6 mm
DS92LV0411SQE	Texas Instruments	LINE DRIVER		NO LEAD	36		SQUARE	UNSPECIFIED	YES														CHIP CARRIER													QUAD	S-XQCC-N36				Not Qualified
DS99R421QSQ/NOPB	Texas Instruments	LINE RECEIVER	INDUSTRIAL	NO LEAD	36	HVQCCN	SQUARE	UNSPECIFIED	YES	3.6 V	3			AEC-Q100		ISO 10605	130 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.6 V	3.3		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC36,.25SQ,20	3 V	Line Driver or Receivers		3 V	.5 mm	105 Cel	3.3 V	3-STATE	-40 Cel		MATTE TIN	QUAD	S-XQCC-N36	3	.8 mm	6 mm	Not Qualified	TRUE	3	NO	e3	30	260	6 mm	0 ns
DS92LV0411SQX	Texas Instruments	LINE DRIVER		NO LEAD	36		SQUARE	UNSPECIFIED	YES														CHIP CARRIER													QUAD	S-XQCC-N36				Not Qualified
DS99R421QSQ	Texas Instruments	LINE RECEIVER	INDUSTRIAL	NO LEAD	36	HVQCCN	SQUARE	UNSPECIFIED	YES	3.6 V	1					GENERAL PURPOSE		DIFFERENTIAL	3.3 V				CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE					3 V	.5 mm	105 Cel			-40 Cel		TIN LEAD	QUAD	S-XQCC-N36	3	.8 mm	6 mm	Not Qualified		3	YES	e0			6 mm
HPA02255ZRQR	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	BALL	36	VFBGA	SQUARE	PLASTIC/EPOXY	YES	4.8 V	1					GENERAL PURPOSE		DIFFERENTIAL SCHMITT TRIGGER	3.6 V	4.8 V			GRID ARRAY, VERY THIN PROFILE, FINE PITCH		2.7 V			2.7 V	.5 mm	85 Cel	3.6 V		-40 Cel	1	TIN SILVER COPPER	BOTTOM	S-PBGA-B36	2	1 mm	3.5 mm			1	YES	e1	30	260	3.5 mm
DS92LV0421SQX/NOPB	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	36	HVQCCN	SQUARE	UNSPECIFIED	YES	1.89 V	1					I2C	100 mA	DIFFERENTIAL	1.8 V	1.89 V	1.8,3.3		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC36,.25SQ,20	1.71 V	Line Driver or Receivers		1.71 V	.5 mm	85 Cel	1.8 V		-40 Cel	24	MATTE TIN	QUAD	S-XQCC-N36	3	.8 mm	6 mm	Not Qualified			YES	e3	30	260	6 mm	0 ns
DS99R421ISQX/NOPB	Texas Instruments	LINE RECEIVER	INDUSTRIAL	NO LEAD	36	HVQCCN	SQUARE	UNSPECIFIED	YES	3.6 V	3			AEC-Q100		ISO 10605	130 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V		3.3		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC36,.25SQ,20		Line Driver or Receivers		3 V	.5 mm	105 Cel			-40 Cel		MATTE TIN	QUAD	S-XQCC-N36	3	.8 mm	6 mm	Not Qualified		3		e3	30	260	6 mm	0 ns
DS92LV0421SQ/NOPB	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	36	HVQCCN	SQUARE	UNSPECIFIED	YES	1.89 V	1					I2C	100 mA	DIFFERENTIAL	1.8 V	1.89 V	1.8,3.3		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC36,.25SQ,20	1.71 V	Line Driver or Receivers		1.71 V	.5 mm	85 Cel	1.8 V	3-STATE	-40 Cel	24	MATTE TIN	QUAD	S-XQCC-N36	3	.8 mm	6 mm	Not Qualified	COMPLEMENTARY		YES	e3	30	260	6 mm	0 ns
DS92LV0421SQE/NOPB	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	36	HVQCCN	SQUARE	UNSPECIFIED	YES	1.89 V	1					I2C	100 mA	DIFFERENTIAL	1.8 V	1.89 V	1.8,3.3		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC36,.25SQ,20	1.71 V	Line Driver or Receivers		1.71 V	.5 mm	85 Cel	1.8 V		-40 Cel	24	MATTE TIN	QUAD	S-XQCC-N36	3	.8 mm	6 mm	Not Qualified			YES	e3	30	260	6 mm	0 ns
DS99R421QSQX/NOPB	Texas Instruments	LINE RECEIVER	INDUSTRIAL	NO LEAD	36	HVQCCN	SQUARE	UNSPECIFIED	YES	3.6 V	3			AEC-Q100		ISO 10605	130 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.6 V	3.3		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC36,.25SQ,20	3 V	Line Driver or Receivers		3 V	.5 mm	105 Cel	3.3 V	3-STATE	-40 Cel		MATTE TIN	QUAD	S-XQCC-N36	3	.8 mm	6 mm	Not Qualified	TRUE	3	NO	e3	30	260	6 mm	0 ns
DS250DF230ZLST	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	BALL	36	LFBGA	SQUARE	PLASTIC/EPOXY	YES		2	2				GENERAL PURPOSE		DIFFERENTIAL					GRID ARRAY, LOW PROFILE, FINE PITCH						.8 mm	85 Cel			-40 Cel	2	Tin/Silver/Copper (Sn/Ag/Cu)	BOTTOM	S-PBGA-B36	3	1.41 mm	5 mm			2	YES	e1	30	260	5 mm
DS90UR907QSQE/NOPB	Texas Instruments	LINE RECEIVER	INDUSTRIAL	NO LEAD	36	HVQCCN	SQUARE	UNSPECIFIED	YES	1.89 V	1			AEC-Q100		I2C	90 mA	DIFFERENTIAL	1.8 V	1.89 V	1.8,1.8/3.3		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC36,.25SQ,20	1.71 V	Line Driver or Receivers		1.71 V	.5 mm	105 Cel	1.8 V		-40 Cel		MATTE TIN	QUAD	S-XQCC-N36	3	.8 mm	6 mm	Not Qualified		1	NO	e3	30	260	6 mm	0 ns
DS25MB100TSQ	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	36	HVQCCN	SQUARE	UNSPECIFIED	YES	3.465 V	2				1 ns	GENERAL PURPOSE		DIFFERENTIAL	3.3 V				CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE					3.135 V	.5 mm	85 Cel			-40 Cel	2	TIN	QUAD	S-XQCC-N36	3	.8 mm	6 mm	Not Qualified		2	YES	e3			6 mm	1 ns
TUSB1211A1ZRQ	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	BALL	36	VFBGA	SQUARE	PLASTIC/EPOXY	YES	4.8 V	1					GENERAL PURPOSE		STANDARD	3.6 V	4.8 V	3.6		GRID ARRAY, VERY THIN PROFILE, FINE PITCH	BGA36,6X6,20	2.7 V	Line Driver or Receivers		2.7 V	.5 mm	85 Cel	3.6 V		-40 Cel	1	TIN SILVER COPPER	BOTTOM	S-PBGA-B36	2	1 mm	3.5 mm	Not Qualified		1	NO	e1	30	260	3.5 mm	0 ns
DS250DF230ZLSR	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	BALL	36	LFBGA	SQUARE	PLASTIC/EPOXY	YES		2	2				GENERAL PURPOSE		DIFFERENTIAL					GRID ARRAY, LOW PROFILE, FINE PITCH						.8 mm	85 Cel			-40 Cel	2	Tin/Silver/Copper (Sn/Ag/Cu)	BOTTOM	S-PBGA-B36	3	1.41 mm	5 mm			2	YES	e1	30	260	5 mm
DS25MB100TSQX	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	36	HVQCCN	SQUARE	UNSPECIFIED	YES	3.465 V	2				1 ns	GENERAL PURPOSE		DIFFERENTIAL	3.3 V				CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE					3.135 V	.5 mm	85 Cel			-40 Cel	2	TIN	QUAD	S-XQCC-N36	3	.8 mm	6 mm	Not Qualified		2	YES	e3			6 mm	1 ns
DS90UR907QSQX/NOPB	Texas Instruments	LINE RECEIVER	INDUSTRIAL	NO LEAD	36	HVQCCN	SQUARE	UNSPECIFIED	YES	1.89 V	1			AEC-Q100		I2C	90 mA	DIFFERENTIAL	1.8 V	1.89 V	1.8,1.8/3.3		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC36,.25SQ,20	1.71 V	Line Driver or Receivers		1.71 V	.5 mm	105 Cel	1.8 V		-40 Cel		MATTE TIN	QUAD	S-XQCC-N36	3	.8 mm	6 mm	Not Qualified		1	NO	e3	30	260	6 mm	0 ns
DS25MB100TSQX/NOPB	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	36	HVQCCN	SQUARE	UNSPECIFIED	YES	3.465 V	1								3.3 V	3.465 V	3.3		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC36,.25SQ,20	3.15 V	Line Driver or Receivers	.00001 Amp	3.135 V	.5 mm	85 Cel	3.3 V	DIFFERENTIAL	-40 Cel		MATTE TIN	QUAD	S-XQCC-N36	3			Not Qualified	COMPLEMENTARY	1	YES	e3	30	260		0 ns
DS90UR907QSQ/NOPB	Texas Instruments	LINE RECEIVER	INDUSTRIAL	NO LEAD	36	HVQCCN	SQUARE	UNSPECIFIED	YES	1.89 V	1			AEC-Q100		I2C	90 mA	DIFFERENTIAL	1.8 V	1.89 V	1.8,1.8/3.3		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC36,.25SQ,20	1.71 V	Line Driver or Receivers		1.71 V	.5 mm	105 Cel	1.8 V		-40 Cel		MATTE TIN	QUAD	S-XQCC-N36	3	.8 mm	6 mm	Not Qualified		1	NO	e3	30	260	6 mm	0 ns
LTC2845IG	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	36	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES		5				2500 ns	EIA-232; V.10; V.11; V.28; V.35; V.36; X.21; EIA-422; EIA-423; EIA-449; EIA-530; EIA-530-A		DIFFERENTIAL SCHMITT TRIGGER	5 V			-5.5 V	SMALL OUTLINE, SHRINK PITCH						.65 mm	85 Cel	8 V		-40 Cel	5	Tin/Lead (Sn/Pb)	DUAL	R-PDSO-G36	1	2 mm	5.3 mm	Not Qualified		5	YES	e0			12.8 mm	500 ns
LTC1545IG	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	36	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	5				2500 ns	EIA-232; V.35; V.36; X.21; EIA-499; EIA-530; EIA-530-A		STANDARD	5 V				SMALL OUTLINE, SHRINK PITCH					4.75 V	.65 mm	85 Cel			-40 Cel	5	TIN LEAD	DUAL	R-PDSO-G36	1	2 mm	5.3 mm	Not Qualified		5	NO	e0			12.8 mm	450 ns
LTC2846CG#TR	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	GULL WING	36	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES		3				2500 ns	EIA-232; V.10; V.11; V.28; V.35; V.36; X.21; EIA-422; EIA-423; EIA-449; EIA-530; EIA-530-A		DIFFERENTIAL SCHMITT TRIGGER	5 V				SMALL OUTLINE, SHRINK PITCH						.65 mm	70 Cel			0 Cel	3	TIN LEAD	DUAL	R-PDSO-G36	1	2 mm	5.3 mm	Not Qualified		3	YES	e0			12.8 mm	300 ns
LTC2846CG	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	GULL WING	36	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES		3				2500 ns	EIA-232; V.10; V.11; V.28; V.35; V.36; X.21; EIA-422; EIA-423; EIA-449; EIA-530; EIA-530-A		DIFFERENTIAL SCHMITT TRIGGER	5 V				SMALL OUTLINE, SHRINK PITCH						.65 mm	70 Cel			0 Cel	3	TIN LEAD	DUAL	R-PDSO-G36	1	2 mm	5.3 mm	Not Qualified		3	YES	e0			12.8 mm	300 ns
LTC2845CG#TRPBF	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	GULL WING	36	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES		5				2500 ns	EIA-232; V.10; V.11; V.28; V.35; V.36; X.21; EIA-422; EIA-423; EIA-449; EIA-530; EIA-530-A		DIFFERENTIAL SCHMITT TRIGGER	5 V			-5.5 V	SMALL OUTLINE, SHRINK PITCH						.65 mm	70 Cel	8 V		0 Cel	5	MATTE TIN	DUAL	R-PDSO-G36	1	2 mm	5.3 mm	Not Qualified		5	YES	e3	30	260	12.8 mm	500 ns
LTC1545CG	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	GULL WING	36	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	5		CMOS		2500 ns	EIA-232; V.35; V.36; X.21; EIA-499; EIA-530; EIA-530-A		STANDARD	5 V				SMALL OUTLINE, SHRINK PITCH					4.75 V	.65 mm	70 Cel			0 Cel	5	Tin/Lead (Sn/Pb)	DUAL	R-PDSO-G36	1	2 mm	5.3 mm	Not Qualified		5	NO	e0			12.8 mm	450 ns
LTC2845CG#TR	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	GULL WING	36	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES		5				2500 ns	EIA-232; V.10; V.11; V.28; V.35; V.36; X.21; EIA-422; EIA-423; EIA-449; EIA-530; EIA-530-A		DIFFERENTIAL SCHMITT TRIGGER	5 V			-5.5 V	SMALL OUTLINE, SHRINK PITCH						.65 mm	70 Cel	8 V		0 Cel	5	TIN LEAD	DUAL	R-PDSO-G36	1	2 mm	5.3 mm	Not Qualified		5	YES	e0			12.8 mm	500 ns
LTC2845IG#TR	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	36	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES		5				2500 ns	EIA-232; V.10; V.11; V.28; V.35; V.36; X.21; EIA-422; EIA-423; EIA-449; EIA-530; EIA-530-A		DIFFERENTIAL SCHMITT TRIGGER	5 V			-5.5 V	SMALL OUTLINE, SHRINK PITCH						.65 mm	85 Cel	8 V		-40 Cel	5	TIN LEAD	DUAL	R-PDSO-G36	1	2 mm	5.3 mm	Not Qualified		5	YES	e0			12.8 mm	500 ns
LTC1545IG#TR	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	36	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	5				2500 ns	EIA-232; V.35; V.36; X.21; EIA-499; EIA-530; EIA-530-A		STANDARD	5 V				SMALL OUTLINE, SHRINK PITCH					4.75 V	.65 mm	85 Cel			-40 Cel	5	TIN LEAD	DUAL	R-PDSO-G36	1	2 mm	5.3 mm	Not Qualified		5	NO	e0			12.8 mm	450 ns
LTC1545IG#PBF	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	36	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	5				2500 ns	EIA-232; V.35; V.36; X.21; EIA-499; EIA-530; EIA-530-A		STANDARD	5 V				SMALL OUTLINE, SHRINK PITCH					4.75 V	.65 mm	85 Cel			-40 Cel	5	MATTE TIN	DUAL	R-PDSO-G36	1	2 mm	5.3 mm	Not Qualified		5	NO	e3	30	260	12.8 mm	450 ns
LTC2846IG	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	36	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES		3				2500 ns	EIA-232; V.10; V.11; V.28; V.35; V.36; X.21; EIA-422; EIA-423; EIA-449; EIA-530; EIA-530-A		DIFFERENTIAL SCHMITT TRIGGER	5 V				SMALL OUTLINE, SHRINK PITCH						.65 mm	85 Cel			-40 Cel	3	TIN LEAD	DUAL	R-PDSO-G36	1	2 mm	5.3 mm	Not Qualified		3	YES	e0			12.8 mm	300 ns
LTC2845IG#PBF	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	36	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES		5				2500 ns	EIA-232; V.10; V.11; V.28; V.35; V.36; X.21; EIA-422; EIA-423; EIA-449; EIA-530; EIA-530-A		DIFFERENTIAL SCHMITT TRIGGER	5 V			-5.5 V	SMALL OUTLINE, SHRINK PITCH						.65 mm	85 Cel	8 V		-40 Cel	5	MATTE TIN	DUAL	R-PDSO-G36	1	2 mm	5.3 mm	Not Qualified		5	YES	e3	30	260	12.8 mm	500 ns
LTC1545CG#PBF	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	GULL WING	36	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	5		CMOS		2500 ns	EIA-232; V.35; V.36; X.21; EIA-499; EIA-530; EIA-530-A		STANDARD	5 V				SMALL OUTLINE, SHRINK PITCH					4.75 V	.65 mm	70 Cel			0 Cel	5	MATTE TIN	DUAL	R-PDSO-G36	1	2 mm	5.3 mm	Not Qualified		5	NO	e3	30	260	12.8 mm	450 ns
LTC2845IG#TRPBF	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	36	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES		5				2500 ns	EIA-232; V.10; V.11; V.28; V.35; V.36; X.21; EIA-422; EIA-423; EIA-449; EIA-530; EIA-530-A		DIFFERENTIAL SCHMITT TRIGGER	5 V			-5.5 V	SMALL OUTLINE, SHRINK PITCH						.65 mm	85 Cel	8 V		-40 Cel	5	MATTE TIN	DUAL	R-PDSO-G36	1	2 mm	5.3 mm	Not Qualified		5	YES	e3	30	260	12.8 mm	500 ns
LTC2845CG#PBF	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	GULL WING	36	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES		5				2500 ns	EIA-232; V.10; V.11; V.28; V.35; V.36; X.21; EIA-422; EIA-423; EIA-449; EIA-530; EIA-530-A		DIFFERENTIAL SCHMITT TRIGGER	5 V			-5.5 V	SMALL OUTLINE, SHRINK PITCH						.65 mm	70 Cel	8 V		0 Cel	5	MATTE TIN	DUAL	R-PDSO-G36	1	2 mm	5.3 mm	Not Qualified		5	YES	e3	30	260	12.8 mm	500 ns
LTC1545IG#TRPBF	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	36	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	5				2500 ns	EIA-232; V.35; V.36; X.21; EIA-499; EIA-530; EIA-530-A		STANDARD	5 V				SMALL OUTLINE, SHRINK PITCH					4.75 V	.65 mm	85 Cel			-40 Cel	5	MATTE TIN	DUAL	R-PDSO-G36	1	2 mm	5.3 mm	Not Qualified		5	NO	e3			12.8 mm	450 ns
LTC2845CG	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	GULL WING	36	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES		5				2500 ns	EIA-232; V.10; V.11; V.28; V.35; V.36; X.21; EIA-422; EIA-423; EIA-449; EIA-530; EIA-530-A		DIFFERENTIAL SCHMITT TRIGGER	5 V			-5.5 V	SMALL OUTLINE, SHRINK PITCH						.65 mm	70 Cel	8 V		0 Cel	5	TIN LEAD	DUAL	R-PDSO-G36	1	2 mm	5.3 mm	Not Qualified		5	YES	e0			12.8 mm	500 ns

Line Drivers & Receivers

Line drivers and receivers are electronic components that are used to transmit and receive data signals over long distances. They are commonly used in industrial and commercial applications that require reliable and high-speed data transmission.

Line drivers are electronic components that amplify signals and provide the necessary voltage and current to drive the transmission line. They are used to ensure that the data signal maintains its integrity and strength as it travels through the transmission line.

Line receivers are electronic components that are used to receive the data signal and convert it back to a usable form. They typically include a differential amplifier and a threshold detector to ensure that the received signal is of sufficient quality and strength to be used by the receiving device.

Line drivers and receivers can be classified into several types based on their specific applications and characteristics. Some of the most common types of line drivers and receivers include RS-232, RS-422, and RS-485.