48 Line Drivers & Receivers 790

Reset All

Part	Manufacturer	Interface IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	Maximum Supply Voltage	No. of Functions	No. of Channels	Technology	Screening Level	Maximum Transmit Delay	Interface Standard	Maximum Supply Current	Input Characteristics	Nominal Supply Voltage	Maximum Supply Voltage-1	Power Supplies (V)	Package Style (Meter)	Package Equivalence Code	Minimum Supply Voltage-1	Sub-Category	Maximum High Level Input Current	Minimum Supply Voltage	Terminal Pitch	Maximum Operating Temperature	Nominal Supply Voltage-1	Output Characteristics	Minimum Operating Temperature	Driver No. of Bits	Terminal Finish	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Seated Height	Width	Qualification	Maximum Output Low Current	Output Polarity	Receiver No. of Bits	Additional Features	Differential Output	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Minimum Out Swing	Maximum Receive Delay
FIN1108MTDX	Onsemi	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	48	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	8				1.75 ns	EIA-644-A; TIA-644-A		DIFFERENTIAL	3.3 V		3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP48,.3,20		Line Driver or Receivers		3 V	.5 mm	85 Cel			-40 Cel	8	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G48	2	1.2 mm	6.1 mm	Not Qualified			8		YES	e4	30	260	12.5 mm		1.75 ns
DP83630SQE/NOPB	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1					IEEE 1588		DIFFERENTIAL	3.3 V	3.6 V		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		3 V		.00001 Amp	3 V	.5 mm	85 Cel	3.3 V	DIFFERENTIAL	-40 Cel	1	MATTE TIN	QUAD	S-PQCC-N48	2	.8 mm	7 mm			COMPLEMENTARY	1		YES	e3	30	260	7 mm		0 ns
LMH0387SLE/NOPB	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	48	VQCCN	SQUARE	UNSPECIFIED	YES	3.465 V	1					GENERAL PURPOSE	117 mA	DIFFERENTIAL	3.3 V	3.46 V		CHIP CARRIER, VERY THIN PROFILE		3.14 V			3.135 V	.5 mm	85 Cel	3.3 V	DIFFERENTIAL	-40 Cel	1	NICKEL GOLD	QUAD	S-XQCC-N48	3	.9 mm	7 mm			COMPLEMENTARY	1		YES	e4	30	260	7 mm	2.4 V	0 ns
DP83630SQX/NOPB	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1					IEEE 1588		DIFFERENTIAL	3.3 V	3.6 V		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		3 V		.00001 Amp	3 V	.5 mm	85 Cel	3.3 V		-40 Cel	1	MATTE TIN	QUAD	S-PQCC-N48	2	.8 mm	7 mm				1		YES	e3	30	260	7 mm		0 ns
FIN1108MTD	Onsemi	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	48	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	8				1.75 ns	EIA-644-A; TIA-644-A		DIFFERENTIAL	3.3 V		3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP48,.3,20		Line Driver or Receivers		3 V	.5 mm	85 Cel			-40 Cel	8	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G48	2	1.2 mm	6.1 mm	Not Qualified			8		YES	e4	30	260	12.5 mm		1.75 ns
DP83630SQ/NOPB	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1					IEEE 1588		DIFFERENTIAL	3.3 V	3.6 V		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		3 V		.00001 Amp	3 V	.5 mm	85 Cel	3.3 V		-40 Cel	1	MATTE TIN	QUAD	S-PQCC-N48	2	.8 mm	7 mm				1		YES	e3	30	260	7 mm		0 ns
DS90UB954TRGZRQ1	Texas Instruments	LINE RECEIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	1.89 V	2			AEC-Q100		ISO 10605		DIFFERENTIAL SCHMITT TRIGGER	1.8 V	1.89 V		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		1.71 V			1.71 V	.5 mm	105 Cel	1.8 V		-40 Cel		Nickel/Palladium/Gold (Ni/Pd/Au)	QUAD	S-PQCC-N48	3	1 mm	7 mm				2	ALSO HAS SUPPLY RANGING FROM 1.045 TO 1.155V	NO	e4	NOT SPECIFIED	260	7 mm
LMH0387SLX/NOPB	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	48	VQCCN	SQUARE	UNSPECIFIED	YES	3.465 V	1					GENERAL PURPOSE		DIFFERENTIAL	3.3 V			CHIP CARRIER, VERY THIN PROFILE					3.135 V	.5 mm	85 Cel			-40 Cel	1		QUAD	S-XQCC-N48	3	.9 mm	7 mm				1		YES		30	260	7 mm		0 ns
DS90C363BMTX/NOPB	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	48	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	3		CMOS			EIA-644; TIA-644	55 mA	STANDARD	3.3 V	3.6 V	3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP48,.3,20	3 V	Line Driver or Receivers		3 V	.5 mm	70 Cel	3.3 V	DIFFERENTIAL	-10 Cel	3	MATTE TIN	DUAL	R-PDSO-G48	2	1.2 mm	6.1 mm	Not Qualified		COMPLEMENTARY			YES	e3	30	260	12.5 mm		0 ns
DS90CR216MTD	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	48	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES		4		CMOS				105 mA		3.3 V	3.6 V	3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP48,.3,20	3 V	Line Driver or Receivers			.5 mm	70 Cel	3.3 V	3-STATE	-10 Cel		TIN LEAD	DUAL	R-PDSO-G48	2			Not Qualified		TRUE	4		NO	e0	20	235		2.7 V	0 ns
DS90UB954TRGZTQ1	Texas Instruments	LINE RECEIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	1.89 V	2			AEC-Q100		ISO 10605		DIFFERENTIAL SCHMITT TRIGGER	1.8 V	1.89 V		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		1.71 V			1.71 V	.5 mm	105 Cel	1.8 V		-40 Cel		Nickel/Palladium/Gold (Ni/Pd/Au)	QUAD	S-PQCC-N48	3	1 mm	7 mm				2	ALSO HAS SUPPLY RANGING FROM 1.045 TO 1.155V	NO	e4	NOT SPECIFIED	260	7 mm
LMH0387SL/NOPB	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	48	VQCCN	SQUARE	UNSPECIFIED	YES	3.465 V	1					GENERAL PURPOSE	117 mA	DIFFERENTIAL	3.3 V	3.46 V		CHIP CARRIER, VERY THIN PROFILE		3.14 V			3.135 V	.5 mm	85 Cel	3.3 V	DIFFERENTIAL	-40 Cel	1	NICKEL GOLD	QUAD	S-XQCC-N48	3	.9 mm	7 mm			COMPLEMENTARY	1		YES	e4	30	260	7 mm	2.4 V	0 ns
DS90UR908QSQ/NOPB	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE	UNSPECIFIED	YES	1.89 V	1			AEC-Q100		GENERAL PURPOSE	95 mA	DIFFERENTIAL SCHMITT TRIGGER	1.8 V	3.6 V	1.8,1.8/3.3	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC48,.27SQ,20	3 V	Line Driver or Receivers		1.71 V	.5 mm	105 Cel	3.3 V	DIFFERENTIAL	-40 Cel	1	MATTE TIN	QUAD	S-XQCC-N48	3	.8 mm	7 mm	Not Qualified		TRUE			YES	e3	30	260	7 mm		0 ns
SN65MLVD040RGZT	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	3.6 V	4				2.4 ns	EIA-899; TIA-899; EIA-485; TIA-485	165 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.6 V	3.3	CHIP CARRIER	LCC44,.28SQ,20	3 V	Line Driver or Receivers	.00001 Amp	3 V	.5 mm	85 Cel	3.3 V	DIFFERENTIAL	-40 Cel	4	NICKEL PALLADIUM GOLD	QUAD	S-PQCC-N48	3	1 mm	7 mm	Not Qualified	8 Amp	COMPLEMENTARY	4		YES	e4	30	260	7 mm	.48 V	6 ns
DS90UR908QSQE/NOPB	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE	UNSPECIFIED	YES	1.89 V	1			AEC-Q100		GENERAL PURPOSE	95 mA	DIFFERENTIAL SCHMITT TRIGGER	1.8 V	3.6 V	1.8,1.8/3.3	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC48,.27SQ,20	3 V	Line Driver or Receivers		1.71 V	.5 mm	105 Cel	3.3 V	DIFFERENTIAL	-40 Cel	1	MATTE TIN	QUAD	S-XQCC-N48	3	.8 mm	7 mm	Not Qualified		TRUE			YES	e3	30	260	7 mm		0 ns
DS90UR908QSQX/NOPB	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE	UNSPECIFIED	YES	1.89 V	1			AEC-Q100		GENERAL PURPOSE	95 mA	DIFFERENTIAL SCHMITT TRIGGER	1.8 V	3.6 V	1.8,1.8/3.3	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC48,.27SQ,20	3 V	Line Driver or Receivers		1.71 V	.5 mm	105 Cel	3.3 V	DIFFERENTIAL	-40 Cel	1	MATTE TIN	QUAD	S-XQCC-N48	3	.8 mm	7 mm	Not Qualified		TRUE			YES	e3	30	260	7 mm		0 ns
DS90C363BMT/NOPB	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	48	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	3		CMOS			EIA-644; TIA-644	55 mA	STANDARD	3.3 V	3.6 V	3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP48,.3,20	3 V	Line Driver or Receivers		3 V	.5 mm	70 Cel	3.3 V		-10 Cel	3	MATTE TIN	DUAL	R-PDSO-G48	2	1.2 mm	6.1 mm	Not Qualified					YES	e3	30	260	12.5 mm		0 ns
DS90UR908QSQE	Texas Instruments	LINE DRIVER		NO LEAD	48		SQUARE	UNSPECIFIED	YES													CHIP CARRIER													QUAD	S-XQCC-N48				Not Qualified
DIX4192IPFBRQ1	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	48	TFQFP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1		CMOS	AEC-Q100		GENERAL PURPOSE		DIFFERENTIAL SCHMITT TRIGGER	3.3 V	1.95 V		FLATPACK, THIN PROFILE, FINE PITCH		1.65 V			3 V	.5 mm	85 Cel	1.8 V		-40 Cel	1	NICKEL PALLADIUM GOLD	QUAD	S-PQFP-G48	2	1.2 mm	7 mm				1		YES	e4	30	260	7 mm
SN65MLVD040RGZR	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	3.6 V	4				2.4 ns	EIA-899; TIA-899; EIA-485; TIA-485	165 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.6 V	3.3	CHIP CARRIER	LCC44,.28SQ,20	3 V	Line Driver or Receivers	.00001 Amp	3 V	.5 mm	85 Cel	3.3 V	DIFFERENTIAL	-40 Cel	4	NICKEL PALLADIUM GOLD	QUAD	S-PQCC-N48	3	1 mm	7 mm	Not Qualified	8 Amp	COMPLEMENTARY	4		YES	e4	30	260	7 mm	.48 V	6 ns
DS90C363BMT	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	48	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	3		CMOS			EIA-644; TIA-644	55 mA	STANDARD	3.3 V	3.6 V	3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP48,.3,20	3 V	Line Driver or Receivers		3 V	.5 mm	70 Cel	3.3 V	DIFFERENTIAL	-10 Cel	3	TIN LEAD	DUAL	R-PDSO-G48	2	1.2 mm	6.1 mm	Not Qualified		COMPLEMENTARY			YES	e0	20	235	12.5 mm		0 ns
DS90C124IVS/NOPB	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	48	TFQFP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1		CMOS	AEC-Q100		GENERAL PURPOSE	75 mA	DIFFERENTIAL	3.3 V	3.6 V	3.3	FLATPACK, THIN PROFILE, FINE PITCH	TQFP48,.35SQ	3 V	Line Driver or Receivers		3 V	.5 mm	105 Cel	3.3 V		-40 Cel		MATTE TIN	QUAD	S-PQFP-G48	3	1.2 mm	7 mm	Not Qualified		TRUE	1		NO	e3	30	260	7 mm		0 ns
DS90C363BMTX	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	48	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1		CMOS			EIA-644; TIA-644	55 mA	STANDARD	3.3 V		3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP48,.3,20		Line Driver or Receivers		3 V	.5 mm	70 Cel			-10 Cel	3	TIN LEAD	DUAL	R-PDSO-G48	2	1.1 mm	6.1 mm	Not Qualified					YES	e0	20	235	12.5 mm		0 ns
DS90UR241QVSX/NOPB	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	48	TFQFP	SQUARE	PLASTIC/EPOXY	YES		1			AEC-Q100			105 mA		3.3 V	3.6 V	3.3	FLATPACK, THIN PROFILE, FINE PITCH	TQFP48,.35SQ	3 V	Line Driver or Receivers			.5 mm	105 Cel	3.3 V	DIFFERENTIAL	-40 Cel	1	MATTE TIN	QUAD	S-PQFP-G48	3	1.2 mm	7 mm	Not Qualified		COMPLEMENTARY	1		YES	e3	30	260	7 mm	2 V	0 ns
SN65MLVD048RGZR	Texas Instruments	LINE RECEIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	3.6 V	4		CMOS		6 ns	EIA-899; TIA-899	94 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.6 V	3.3	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC48,.27SQ,20	3 V	Line Driver or Receivers	.00001 Amp	3 V	.5 mm	85 Cel	3.3 V	TOTEM-POLE	-40 Cel		NICKEL PALLADIUM GOLD	QUAD	S-PQCC-N48	3	1 mm	7 mm	Not Qualified	8 Amp	TRUE	4		NO	e4	30	260	7 mm		6 ns
SN75LVDS86ADGG	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	48	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1		CMOS			EIA-644; TIA-644	40 mA	DIFFERENTIAL	3.3 V	3.6 V	3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP48,.3,20	3 V	Line Driver or Receivers	.00002 Amp	3 V	.5 mm	70 Cel	3.3 V	TOTEM-POLE	0 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G48	2	1.2 mm	6.1 mm	Not Qualified		TRUE	3		NO	e4	30	260	12.5 mm		7 ns
SN65LVDS95DGGREP	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	48	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4		CMOS			EIA-644; TIA-644	110 mA	STANDARD	3.3 V	3.6 V	3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP48,.3,20	3 V	Line Driver or Receivers	.00002 Amp	3 V	.5 mm	85 Cel	3.3 V	DIFFERENTIAL	-40 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G48	1	1.2 mm	6.1 mm	Not Qualified		COMPLEMENTARY			YES	e4	30	260	12.5 mm		0 ns
SN75LVDS86ADGGG4	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	48	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1		CMOS			EIA-644; TIA-644		DIFFERENTIAL	3.3 V	3.6 V	3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP48,.3,20	3 V	Line Driver or Receivers		3 V	.5 mm	70 Cel	3.3 V	DIFFERENTIAL	0 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G48	2	1.2 mm	6.1 mm	Not Qualified		INVERTED	3		NO	e4	30	260	12.5 mm		7 ns
SN75LVDS86ADGGR	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	48	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1		CMOS			EIA-644; TIA-644	40 mA	DIFFERENTIAL	3.3 V	3.6 V	3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP48,.3,20	3 V	Line Driver or Receivers	.00002 Amp	3 V	.5 mm	70 Cel	3.3 V	TOTEM-POLE	0 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G48	2	1.2 mm	6.1 mm	Not Qualified		TRUE	3		NO	e4	30	260	12.5 mm		7 ns
SN75LVDS86ADGGRG4	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	48	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1		CMOS			EIA-644; TIA-644	40 mA	DIFFERENTIAL	3.3 V	3.6 V	3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP48,.3,20	3 V	Line Driver or Receivers	.00002 Amp	3 V	.5 mm	70 Cel	3.3 V		0 Cel		Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G48	2	1.2 mm	6.1 mm	Not Qualified			3		NO	e4	NOT SPECIFIED	260	12.5 mm		7 ns
SN75LVDS86DGG	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	48	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	3		CMOS			EIA-644; TIA-644		DIFFERENTIAL	3.3 V	3.6 V	3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP48,.3,20	3 V	Line Driver or Receivers	.00002 Amp	3 V	.5 mm	70 Cel	3.3 V	TOTEM-POLE	0 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G48	2	1.2 mm	6.1 mm	Not Qualified		TRUE	3		NO	e4	30	260	12.5 mm		8.7 ns
SN75LVDS86DGGG4	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	48	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	3		CMOS			EIA-644; TIA-644		DIFFERENTIAL	3.3 V	3.6 V	3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP48,.3,20	3 V	Line Driver or Receivers		3 V	.5 mm	70 Cel	3.3 V	DIFFERENTIAL	0 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G48	2	1.2 mm	6.1 mm	Not Qualified		COMPLEMENTARY	3		NO	e4	30	260	12.5 mm		0 ns
SN75LVDS86DGGR	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	48	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	3		CMOS			EIA-644; TIA-644		DIFFERENTIAL	3.3 V		3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP48,.3,20		Line Driver or Receivers		3 V	.5 mm	70 Cel			0 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G48	2	1.2 mm	6.1 mm	Not Qualified			3		NO	e4	30	260	12.5 mm		8.7 ns
SN75LVDS86DGGRG4	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	48	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	3		CMOS			EIA-644; TIA-644		DIFFERENTIAL	3.3 V		3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP48,.3,20		Line Driver or Receivers		3 V	.5 mm	70 Cel			0 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G48	2	1.2 mm	6.1 mm	Not Qualified			3		NO	e4	30	260	12.5 mm		0 ns
FIN1216MTDX	Onsemi	LINE RECEIVER	INDUSTRIAL	GULL WING	48	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	3					EIA-644; TIA-644	135 mA	DIFFERENTIAL	3.3 V		3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP48,.3,20		Line Driver or Receivers		3 V	.5 mm	85 Cel			-40 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G48	2	1.2 mm	6.1 mm	Not Qualified			3		NO	e4	30	260	12.5 mm
DS110DF410SQE/NOPB	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	2.625 V	4	4				GENERAL PURPOSE		DIFFERENTIAL	2.5 V	2.625 V		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		2.375 V			2.375 V	.5 mm	85 Cel	2.5 V		-40 Cel	4	MATTE TIN	QUAD	S-PQCC-N48	3	.8 mm	7 mm				4		YES	e3	30	260	7 mm	2 V	0 ns
DS90LV004TVS/NOPB	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	48	TFQFP	SQUARE	PLASTIC/EPOXY	YES	3.45 V	4				3.2 ns	GENERAL PURPOSE	140 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.45 V	3.3	FLATPACK, THIN PROFILE, FINE PITCH	TQFP48,.35SQ	3.15 V	Line Driver or Receivers	.00001 Amp	3.15 V	.5 mm	85 Cel			-40 Cel	4	Matte Tin (Sn)	QUAD	S-PQFP-G48	3	1.2 mm	7 mm	Not Qualified		TRUE	4		YES	e3	NOT SPECIFIED	260	7 mm	.25 V	3.2 ns
LMH0340SQE/NOPB	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	2.625 V	5					GENERAL PURPOSE	85 mA	DIFFERENTIAL	2.5 V	3.465 V		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		3.135 V			2.375 V	.5 mm	85 Cel	3.3 V	OPEN-COLLECTOR	-40 Cel	5	MATTE TIN	QUAD	S-XQCC-N48	3	.8 mm	7 mm			TRUE			NO	e3	30	260	7 mm	2.7 V	0 ns
SN65LVDS86AQDGGRQ1	Texas Instruments	LINE RECEIVER	AUTOMOTIVE	GULL WING	48	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1		CMOS	AEC-Q100		EIA-644; TIA-644	40 mA	DIFFERENTIAL	3.3 V	3.6 V	3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP48,.3,20	3 V	Line Driver or Receivers	.000025 Amp	3 V	.5 mm	125 Cel	3.3 V	TOTEM-POLE	-40 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G48	2	1.2 mm	6.1 mm	Not Qualified		TRUE	3		NO	e4	30	260	12.5 mm		7 ns
SN75LVDS84ADGGR	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	48	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4		CMOS			EIA-644; TIA-644	39 mA	STANDARD	3.3 V	3.6 V	3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP48,.3,20	3 V	Line Driver or Receivers	.000025 Amp	3 V	.5 mm	70 Cel	3.3 V	TOTEM-POLE	0 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G48	2	1.2 mm	6.1 mm	Not Qualified		TRUE			YES	e4	30	260	12.5 mm		0 ns
DS90C365AMTX/NOPB	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	48	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	3		CMOS			EIA-644; TIA-644	60 mA	STANDARD	3.3 V	3.6 V	3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP48,.3,20	3 V	Line Driver or Receivers		3 V	.5 mm	70 Cel	3.3 V	DIFFERENTIAL	-10 Cel	3	MATTE TIN	DUAL	R-PDSO-G48	2	1.1 mm	6.1 mm	Not Qualified		COMPLEMENTARY			YES	e3	30	260	12.5 mm		0 ns
DS90CF364MTDX/NOPB	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	48	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES		4		CMOS			EIA-644; TIA-644	105 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.6 V	3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP48,.3,20	3 V	Line Driver or Receivers			.5 mm	85 Cel	3.3 V	DIFFERENTIAL	-40 Cel		MATTE TIN	DUAL	R-PDSO-G48	2	1.2 mm	6.1 mm	Not Qualified		COMPLEMENTARY	4		NO	e3	30	260	12.5 mm	2.7 V	0 ns
DS90UB934TRGZRQ1	Texas Instruments	LINE RECEIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	1.89 V	2			AEC-Q100		ISO 10605		DIFFERENTIAL	1.8 V	1.89 V		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		1.71 V			1.71 V	.5 mm	105 Cel	1.8 V		-40 Cel		NICKEL PALLADIUM GOLD	QUAD	S-PQCC-N48	3	1 mm	7 mm				2		NO	e4	30	260	7 mm
DS90UR241QVS/NOPB	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	48	TFQFP	SQUARE	PLASTIC/EPOXY	YES		1			AEC-Q100			105 mA		3.3 V	3.6 V	3.3	FLATPACK, THIN PROFILE, FINE PITCH	TQFP48,.35SQ	3 V	Line Driver or Receivers			.5 mm	105 Cel	3.3 V	DIFFERENTIAL	-40 Cel	1	MATTE TIN	QUAD	S-PQFP-G48	3	1.2 mm	7 mm	Not Qualified		COMPLEMENTARY	1		YES	e3	30	260	7 mm	2 V	0 ns
DS90CF364MTD/NOPB	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	48	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES		4		CMOS			EIA-644; TIA-644	105 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.6 V	3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP48,.3,20	3 V	Line Driver or Receivers			.5 mm	85 Cel	3.3 V	DIFFERENTIAL	-40 Cel		MATTE TIN	DUAL	R-PDSO-G48	2	1.2 mm	6.1 mm	Not Qualified		COMPLEMENTARY	4		NO	e3	30	260	12.5 mm	2.7 V	0 ns
DS90UB914ATRHSTQ1	Texas Instruments	LINE RECEIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	1.89 V	2			AEC-Q100		ISO 10605		DIFFERENTIAL SCHMITT TRIGGER	1.8 V	1.89 V		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		1.71 V			1.71 V	.5 mm	105 Cel	1.8 V		-40 Cel		MATTE TIN	QUAD	S-PQCC-N48	3	.8 mm	7 mm				2		YES	e3	30	260	7 mm		0 ns
LMH0340SQX/NOPB	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE	UNSPECIFIED	YES	2.625 V	5					GENERAL PURPOSE	85 mA	DIFFERENTIAL	2.5 V	3.465 V		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		3.135 V			2.375 V	.5 mm	85 Cel	3.3 V	OPEN-COLLECTOR	-40 Cel	5	MATTE TIN	QUAD	S-XQCC-N48	3	.8 mm	7 mm			TRUE			NO	e3	30	260	7 mm	2.7 V	0 ns
SN65LVDS86AQDGGR	Texas Instruments	LINE RECEIVER	AUTOMOTIVE	GULL WING	48	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1		CMOS			EIA-644; TIA-644	40 mA	DIFFERENTIAL	3.3 V	3.6 V	3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP48,.3,20	3 V	Line Driver or Receivers	.00002 Amp	3 V	.5 mm	125 Cel	3.3 V	TOTEM-POLE	-40 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G48	2	1.2 mm	6.1 mm	Not Qualified		TRUE	3		NO	e4	30	260	12.5 mm		7 ns

Line Drivers & Receivers

Line drivers and receivers are electronic components that are used to transmit and receive data signals over long distances. They are commonly used in industrial and commercial applications that require reliable and high-speed data transmission.

Line drivers are electronic components that amplify signals and provide the necessary voltage and current to drive the transmission line. They are used to ensure that the data signal maintains its integrity and strength as it travels through the transmission line.

Line receivers are electronic components that are used to receive the data signal and convert it back to a usable form. They typically include a differential amplifier and a threshold detector to ensure that the received signal is of sufficient quality and strength to be used by the receiving device.

Line drivers and receivers can be classified into several types based on their specific applications and characteristics. Some of the most common types of line drivers and receivers include RS-232, RS-422, and RS-485.