64 Line Drivers & Receivers 227

Reset All

Part	Manufacturer	Interface IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	Maximum Supply Voltage	No. of Functions	No. of Channels	Technology	Screening Level	Maximum Transmit Delay	Interface Standard	Maximum Supply Current	Input Characteristics	Nominal Supply Voltage	Maximum Supply Voltage-1	Power Supplies (V)	Package Style (Meter)	Package Equivalence Code	Minimum Supply Voltage-1	Sub-Category	Maximum High Level Input Current	Minimum Supply Voltage	Terminal Pitch	Maximum Operating Temperature	Nominal Supply Voltage-1	Output Characteristics	Minimum Operating Temperature	Driver No. of Bits	Terminal Finish	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Seated Height	Width	Qualification	Maximum Output Low Current	Output Polarity	Receiver No. of Bits	Additional Features	Differential Output	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Minimum Out Swing	Maximum Receive Delay
SII164CT64	Lattice Semiconductor		COMMERCIAL	GULL WING	64	QFP	SQUARE	PLASTIC/EPOXY	YES								120 mA		3.3 V		3.3	FLATPACK	TQFP64,.47SQ		Line Driver or Receivers			.5 mm	70 Cel			0 Cel			QUAD	S-PQFP-G64				Not Qualified
DS90UB941ASRTDTQ1	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	64	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	1.89 V	4			AEC-Q100		GENERAL PURPOSE		DIFFERENTIAL	1.8 V	1.89 V		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		1.71 V			1.71 V	.5 mm	105 Cel	1.8 V		-40 Cel	4	NICKEL PALLADIUM GOLD SILVER	QUAD	S-PQCC-N64	3	.9 mm	9 mm						YES	e4	30	260	9 mm
DS90UB948TNKDTQ1	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	64	HVQCCN	SQUARE	UNSPECIFIED	YES	3.6 V	2			AEC-Q100		GENERAL PURPOSE		DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.6 V		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		3 V			3 V	.5 mm	105 Cel	3.3 V		-40 Cel		Matte Tin (Sn)	QUAD	S-XQCC-N64	3	.8 mm	9 mm				2		NO	e3	30	260	9 mm
DS90UB940NTNKDRQ1	Texas Instruments	LINE RECEIVER	INDUSTRIAL	NO LEAD	64	HVQCCN	SQUARE	UNSPECIFIED	YES	1.26 V	2			AEC-Q100				DIFFERENTIAL SCHMITT TRIGGER	1.2 V	3.6 V		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		3 V			1.14 V	.5 mm	105 Cel	3.3 V		-40 Cel		Matte Tin (Sn)	QUAD	S-XQCC-N64	3	.8 mm	9 mm				2	ALSO HAS SUPPLY VOLTAGE RANGING FROM 3 TO 3.6 V	NO	e3	30	260	9 mm
DS90UB962WRTDTQ1	Texas Instruments	LINE RECEIVER	INDUSTRIAL	NO LEAD	64	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	1.89 V	4			AEC-Q100		GENERAL PURPOSE		DIFFERENTIAL SCHMITT TRIGGER	1.8 V	1.89 V		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		1.71 V			1.71 V	.5 mm	105 Cel	1.8 V		-40 Cel		NICKEL PALLADIUM GOLD SILVER	QUAD	S-PQCC-N64	3	.9 mm	9 mm				4	ALSO HAS SUPPLY VOLTAGE RANGING FROM 1.045 TO 1.155V	NO	e4	30	260	9 mm
DS90UH929TRGCRQ1	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	64	HVQCCN	SQUARE	PLASTIC/EPOXY	YES		1			AEC-Q100			330 mA			1.89 V	1.1,1.8	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC64,.35SQ,20	1.71 V	Line Driver or Receivers			.5 mm	105 Cel	1.8 V	DIFFERENTIAL	-40 Cel	1	NICKEL PALLADIUM GOLD	QUAD	S-PQCC-N64	3	1 mm	9 mm	Not Qualified		COMPLEMENTARY			YES	e4	30	260	9 mm	1.197 V
DS90UH947NTRGCRQ1	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	64	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	1.155 V	2			AEC-Q100			469 mA		1.1 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC64,.35SQ,20				1.045 V	.5 mm	105 Cel		DIFFERENTIAL	-40 Cel	2	NICKEL PALLADIUM GOLD	QUAD	S-PQCC-N64	3	1 mm	9 mm			COMPLEMENTARY			YES	e4	30	260	9 mm	.9 V
DS92LV090ATVEH/NOPB	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	64	LFQFP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	9		CMOS		2.2 ns	GENERAL PURPOSE	210 mA	DIFFERENTIAL	3.3 V	3.6 V	3.3	FLATPACK, LOW PROFILE, FINE PITCH	QFP64,.47SQ,20	3 V	Line Driver or Receivers	.00002 Amp	3 V	.5 mm	85 Cel	3.3 V	3-STATE	-40 Cel	9	MATTE TIN	QUAD	S-PQFP-G64	3	1.6 mm	10 mm	Not Qualified	2 Amp	TRUE	9		YES	e3	30	260	10 mm	.24 V	3.2 ns
SN65LVDM1677DGG	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	64	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	16		CMOS		3.6 ns	GENERAL PURPOSE	175 mA	DIFFERENTIAL	3.3 V	3.6 V	3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP64,.32,20	3 V	Line Driver or Receivers	.00002 Amp	3 V	.5 mm	85 Cel	3.3 V		-40 Cel	16	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G64	2	1.2 mm	6.1 mm	Not Qualified	8 Amp		16		YES	e4	30	260	17 mm	.247 V	4.5 ns
THC63LVD103D	Thine Electronics	LINE DRIVER	COMMERCIAL	GULL WING	64	TFQFP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1					EIA-644; TIA-644	104 mA	STANDARD	3.3 V		3.3	FLATPACK, THIN PROFILE, FINE PITCH	TQFP64,.47SQ		Line Driver or Receivers		3 V	.5 mm	70 Cel			0 Cel	30		QUAD	S-PQFP-G64		1.2 mm	10 mm	Not Qualified					YES		NOT SPECIFIED	NOT SPECIFIED	10 mm
THCV215	Thine Electronics	LINE TRANSCEIVER	COMMERCIAL	GULL WING	64	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1.98 V	12					GENERAL PURPOSE		DIFFERENTIAL	1.8 V			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH					1.62 V	.5 mm	70 Cel			0 Cel	12		DUAL	R-PDSO-G64		1.2 mm	6.1 mm				12		YES				17 mm
ADS58C28IRGC25	Texas Instruments	LINE RECEIVER	INDUSTRIAL	NO LEAD	64	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	1.9 V	2		CMOS			GENERAL PURPOSE		DIFFERENTIAL	1.8 V	1.9 V		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		1.75 V			1.7 V	.5 mm	85 Cel	1.8 V		-40 Cel		NICKEL PALLADIUM GOLD	QUAD	S-PQCC-N64	3	1 mm	9 mm	Not Qualified			2			e4	30	260	9 mm		0 ns
ADS58C28IRGC	Texas Instruments	LINE RECEIVER	INDUSTRIAL	NO LEAD	64	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	1.9 V	2		CMOS			GENERAL PURPOSE		DIFFERENTIAL	1.8 V	1.9 V		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		1.75 V			1.7 V	.5 mm	85 Cel	1.8 V		-40 Cel		NICKEL PALLADIUM GOLD	QUAD	S-PQCC-N64		1 mm	9 mm	Not Qualified			2			e4			9 mm
DS92LV3241TVSX	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	64	TFQFP	SQUARE	UNSPECIFIED	YES	3.465 V	4					GENERAL PURPOSE		DIFFERENTIAL	3.3 V			FLATPACK, THIN PROFILE, FINE PITCH					3.135 V	.5 mm	85 Cel			-40 Cel	4	TIN LEAD	QUAD	S-XQFP-G64		1.2 mm	10 mm	Not Qualified				IT ALSO NEED 1.8V I/O SUPPLY	YES	e0			10 mm
DS92LV3241TVS/NOPB	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	64	TFQFP	SQUARE	PLASTIC/EPOXY	YES		4				10 ns		200 mA		3.3 V	3.465 V	1.8/3.3,3.3	FLATPACK, THIN PROFILE, FINE PITCH	TQFP64,.47SQ	3.135 V	Line Driver or Receivers			.5 mm	85 Cel	3.3 V	DIFFERENTIAL	-40 Cel	4	MATTE TIN	QUAD	S-PQFP-G64	3	1.2 mm	10 mm	Not Qualified		COMPLEMENTARY			YES	e3	30	260	10 mm	2.4 V	0 ns
TSB41AB1PAPG4	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	64	HTFQFP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	2		CMOS			IEEE 1394		DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.6 V	3/3.3	FLATPACK, HEAT SINK/SLUG, THIN PROFILE, FINE PITCH	TQFP64,.47SQ	3 V	Line Driver or Receivers		3 V	.5 mm	70 Cel	3.3 V	DIFFERENTIAL	0 Cel	2	NICKEL PALLADIUM GOLD	QUAD	S-PQFP-G64	3	1.2 mm	10 mm	Not Qualified		COMPLEMENTARY	2		YES	e4	30	260	10 mm	.172 V	0 ns
DS160PR810NJXR	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	64	HVQCCN	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1	8			.12 ns	GENERAL PURPOSE	360 mA	DIFFERENTIAL	3.3 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC64,.22X.39,16				3 V	.4 mm	85 Cel		DIFFERENTIAL	-40 Cel	8	NICKEL PALLADIUM GOLD	QUAD	R-PQCC-N64	2	.8 mm	5.5 mm		-4 Amp	COMPLEMENTARY	8		YES	e4	30	260	10 mm		.12 ns
DS92LV3222TVSX	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	64	TFQFP	SQUARE	UNSPECIFIED	YES	3.465 V	2					GENERAL PURPOSE		DIFFERENTIAL	3.3 V			FLATPACK, THIN PROFILE, FINE PITCH					3.135 V	.5 mm	85 Cel			-40 Cel			QUAD	S-XQFP-G64		1.2 mm	10 mm	Not Qualified			2	IT ALSO NEED 1.8V I/O SUPPLY					10 mm
DS92LV090ATVEH	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	64	LFQFP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	9		CMOS		2.2 ns	GENERAL PURPOSE		DIFFERENTIAL	3.3 V			FLATPACK, LOW PROFILE, FINE PITCH					3 V	.5 mm	85 Cel			-40 Cel	9	Tin/Lead (Sn/Pb)	QUAD	S-PQFP-G64	3	1.6 mm	10 mm				9		YES	e0	40	260	10 mm		3.2 ns
TSB41LV02	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	64	QFP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	4				11 ns	IEEE 1394		DIFFERENTIAL SCHMITT TRIGGER	3.3 V			FLATPACK					3 V		70 Cel			0 Cel	1		QUAD	S-PQFP-G64				Not Qualified			1		YES						0 ns
DS92LV3241TVSX/NOPB	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	64	TFQFP	SQUARE	PLASTIC/EPOXY	YES		4				10 ns		200 mA		3.3 V	3.465 V	1.8/3.3,3.3	FLATPACK, THIN PROFILE, FINE PITCH	TQFP64,.47SQ	3.135 V	Line Driver or Receivers			.5 mm	85 Cel	3.3 V	DIFFERENTIAL	-40 Cel	4	MATTE TIN	QUAD	S-PQFP-G64	3	1.2 mm	10 mm	Not Qualified		COMPLEMENTARY			YES	e3	30	260	10 mm	2.4 V	0 ns
DS160PR822NJXR	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	64	HVQCCN	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	8	8			.12 ns		360 mA	DIFFERENTIAL	3.3 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC64,.21X.39,16				3 V	.4 mm	85 Cel			-40 Cel	8	NICKEL PALLADIUM GOLD	QUAD	R-PQCC-N64	2	.8 mm	5.5 mm				8		YES	e4	30	260	10 mm		.12 ns
TSB41LV02A	Texas Instruments		COMMERCIAL	GULL WING	64	QFP	SQUARE	PLASTIC/EPOXY	YES				CMOS						3.3 V		3.3	FLATPACK	TQFP64,.47SQ		Line Driver or Receivers	.000005 Amp		.5 mm	70 Cel			0 Cel	4		QUAD	S-PQFP-G64				Not Qualified	4 Amp				YES					.172 V	11 ns
PDS90UB941ASRTDTQ1	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	64	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	1.89 V	4			AEC-Q100		GENERAL PURPOSE		DIFFERENTIAL	1.8 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE					1.71 V	.5 mm	105 Cel			-40 Cel	4		QUAD	S-PQCC-N64		.9 mm	9 mm						YES				9 mm
DS92LV090ATVEHX/NOPB	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	64	LFQFP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	9		CMOS		2.2 ns	GENERAL PURPOSE	210 mA	DIFFERENTIAL	3.3 V	3.6 V	3.3	FLATPACK, LOW PROFILE, FINE PITCH	QFP64,.47SQ,20	3 V	Line Driver or Receivers	.00002 Amp	3 V	.5 mm	85 Cel	3.3 V	3-STATE	-40 Cel	9	MATTE TIN	QUAD	S-PQFP-G64	3	1.6 mm	10 mm	Not Qualified	2 Amp	TRUE	9		YES	e3	30	260	10 mm	.24 V	3.2 ns
DS92LV090ATVEP	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	64	LFQFP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	9		CMOS		2.2 ns	GENERAL PURPOSE		DIFFERENTIAL SCHMITT TRIGGER	3.3 V			FLATPACK, LOW PROFILE, FINE PITCH					3 V	.5 mm	85 Cel			-40 Cel	9	TIN LEAD	QUAD	S-PQFP-G64		1.6 mm	10 mm	Not Qualified			9		YES	e0			10 mm		3.2 ns
SCAN16602SM	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	BALL	64	LFBGA	SQUARE	PLASTIC/EPOXY	YES	3.6 V	16				5.5 ns	IEEE 1149.1		STANDARD	3 V			GRID ARRAY, LOW PROFILE, FINE PITCH					2.7 V	.8 mm	85 Cel			-40 Cel	16	Tin/Lead (Sn63Pb37)	BOTTOM	S-PBGA-B64	3	1.5 mm	8 mm	Not Qualified			16		NO	e0	30	235	8 mm		5.5 ns
SCAN92LV090SLC	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	BALL	64	LFBGA	SQUARE	PLASTIC/EPOXY	YES	3.6 V	9		CMOS		2.6 ns	IEEE 1149.1	210 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.6 V	3.3	GRID ARRAY, LOW PROFILE, FINE PITCH	BGA64,8X8,32	3 V	Line Driver or Receivers	.00002 Amp	3 V	.8 mm	85 Cel	3.3 V	3-STATE	-40 Cel	9	TIN LEAD	BOTTOM	S-PBGA-B64	3	1.5 mm	8 mm	Not Qualified	2 Amp	COMPLEMENTARY	9		YES	e0	20	235	8 mm		3.9 ns
TSB14C01APMR	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	64	LFQFP	SQUARE	PLASTIC/EPOXY	YES	5.25 V	2		CMOS			IEEE 1394		STANDARD	5 V		5	FLATPACK, LOW PROFILE, FINE PITCH	QFP64,.47SQ,20		Line Driver or Receivers		4.5 V	.5 mm	70 Cel			0 Cel	2	NICKEL PALLADIUM GOLD	QUAD	S-PQFP-G64	3	1.6 mm	10 mm	Not Qualified	24 Amp		2		NO	e4	30	260	10 mm		0 ns
TSB41LV02APAPR	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	64	TFQFP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	4				11 ns	IEEE 1394		DIFFERENTIAL SCHMITT TRIGGER	3.3 V			FLATPACK, THIN PROFILE, FINE PITCH					3 V	.5 mm	70 Cel			0 Cel	4		QUAD	S-PQFP-G64		1.2 mm	10 mm	Not Qualified			4		YES				10 mm		0 ns
SCAN92LV090VEH	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	64	QFP	SQUARE	PLASTIC/EPOXY	YES				CMOS				210 mA		3.3 V		3.3	FLATPACK	QFP64,.47SQ,20		Line Driver or Receivers	.00002 Amp		.5 mm	85 Cel			-40 Cel	9		QUAD	S-PQFP-G64				Not Qualified	2 Amp				YES		NOT SPECIFIED	NOT SPECIFIED			0 ns
SCAN92LV090VEHX/NOPB	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	64	LFQFP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	9		CMOS		2.6 ns	IEEE 1149.1	230 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V		3.3	FLATPACK, LOW PROFILE, FINE PITCH	QFP64,.47SQ,20		Line Driver or Receivers	.00002 Amp	3 V	.5 mm	85 Cel			-40 Cel	9	MATTE TIN	QUAD	S-PQFP-G64	3	1.6 mm	10 mm	Not Qualified	2 Amp		9		YES	e3	30	260	10 mm	.24 V	3.9 ns
DS92LV3242TVSX	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	64	TFQFP	SQUARE	UNSPECIFIED	YES	3.465 V	4					GENERAL PURPOSE		DIFFERENTIAL	3.3 V			FLATPACK, THIN PROFILE, FINE PITCH					3.135 V	.5 mm	85 Cel			-40 Cel		TIN LEAD	QUAD	S-XQFP-G64		1.2 mm	10 mm	Not Qualified			4	IT ALSO NEED 1.8V I/O SUPPLY		e0			10 mm
TSB41AB2PAPRG4	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	64	HTFQFP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	4					IEEE 1394		DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.6 V	3.3	FLATPACK, HEAT SINK/SLUG, THIN PROFILE, FINE PITCH	TQFP64,.47SQ	3 V	Line Driver or Receivers		3 V	.5 mm	70 Cel	3.3 V	DIFFERENTIAL	0 Cel	4	NICKEL PALLADIUM GOLD	QUAD	S-PQFP-G64	3	1.2 mm	10 mm	Not Qualified	9 Amp	COMPLEMENTARY	4		YES	e4	30	260	10 mm	.172 V	0 ns
SCAN92LV090VEH/NOPB	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	64	LFQFP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	9		CMOS		2.6 ns	IEEE 1149.1	210 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.6 V	3.3	FLATPACK, LOW PROFILE, FINE PITCH	QFP64,.47SQ,20	3 V	Line Driver or Receivers	.00002 Amp	3 V	.5 mm	85 Cel	3.3 V		-40 Cel	9	MATTE TIN	QUAD	S-PQFP-G64	3	1.6 mm	10 mm	Not Qualified	2 Amp		9		YES	e3	30	260	10 mm		3.9 ns
DS160UP822NJXT	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	64	HVQCCN	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	8	8			.12 ns	GENERAL PURPOSE	360 mA	DIFFERENTIAL	3.3 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC64,.22X.39,16				3 V	.4 mm	85 Cel		DIFFERENTIAL	-40 Cel	8	NICKEL PALLADIUM GOLD	QUAD	R-PQCC-N64	2	.8 mm	5.5 mm		-4 Amp	COMPLEMENTARY	8		YES	e4	30	260	10 mm		.12 ns
TSB21LV03BIPM	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	64	LFQFP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	3		CMOS			IEEE 1394	175 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V		3/3.3	FLATPACK, LOW PROFILE, FINE PITCH	QFP64,.47SQ,20		Line Driver or Receivers		3 V	.5 mm	85 Cel			-40 Cel	2		QUAD	S-PQFP-G64		1.6 mm	10 mm	Not Qualified	12 Amp		2		YES		NOT SPECIFIED	NOT SPECIFIED	10 mm	.172 V	0 ns
TSB41AB2PAP	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	64	HTFQFP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	4		CMOS			IEEE 1394		DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.6 V	3.3	FLATPACK, HEAT SINK/SLUG, THIN PROFILE, FINE PITCH	TQFP64,.47SQ	3 V	Line Driver or Receivers		3 V	.5 mm	70 Cel	3.3 V	DIFFERENTIAL	0 Cel	4	NICKEL PALLADIUM GOLD	QUAD	S-PQFP-G64	3	1.2 mm	10 mm	Not Qualified	9 Amp	COMPLEMENTARY	4		YES	e4	30	260	10 mm	.172 V	0 ns
TSB41LV01PAP	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	64	HTFQFP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	2					IEEE 1394		DIFFERENTIAL SCHMITT TRIGGER	3.3 V			FLATPACK, HEAT SINK/SLUG, THIN PROFILE, FINE PITCH					3 V	.5 mm	70 Cel			0 Cel	2		QUAD	S-PQFP-G64		1.2 mm	10 mm	Not Qualified			2		YES				10 mm		0 ns
TSB14C01MPM	Texas Instruments	LINE TRANSCEIVER	MILITARY	GULL WING	64	LFQFP	SQUARE	PLASTIC/EPOXY	YES		1											FLATPACK, LOW PROFILE, FINE PITCH						.5 mm							QUAD	S-PQFP-G64		1.6 mm	10 mm	Not Qualified									10 mm
TSB14C01IPM	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	64	LFQFP	SQUARE	PLASTIC/EPOXY	YES		1											FLATPACK, LOW PROFILE, FINE PITCH						.5 mm							QUAD	S-PQFP-G64		1.6 mm	10 mm	Not Qualified									10 mm
SCAN92LV090SLC/NOPB	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	BALL	64	LFBGA	SQUARE	PLASTIC/EPOXY	YES	3.6 V	9		CMOS		2.6 ns	IEEE 1149.1	210 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.6 V	3.3	GRID ARRAY, LOW PROFILE, FINE PITCH	BGA64,8X8,32	3 V	Line Driver or Receivers	.00002 Amp	3 V	.8 mm	85 Cel	3.3 V		-40 Cel	9	TIN SILVER COPPER	BOTTOM	S-PBGA-B64	4	1.5 mm	8 mm	Not Qualified	2 Amp		9		YES	e1	30	260	8 mm		3.9 ns
SCANH16602SM	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	BALL	64	LFBGA	SQUARE	PLASTIC/EPOXY	YES	3.6 V	16				5.5 ns	IEEE 1149.1		STANDARD	3 V			GRID ARRAY, LOW PROFILE, FINE PITCH					2.7 V	.8 mm	85 Cel			-40 Cel	16	Tin/Lead (Sn63Pb37)	BOTTOM	S-PBGA-B64	3	1.5 mm	8 mm	Not Qualified			16		NO	e0	30	235	8 mm		5.5 ns
SCANH162602SM	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	BALL	64	LFBGA	SQUARE	PLASTIC/EPOXY	YES	3.6 V	16				6 ns	IEEE 1149.1		STANDARD	3 V			GRID ARRAY, LOW PROFILE, FINE PITCH					2.7 V	.8 mm	85 Cel			-40 Cel	16	Tin/Lead (Sn63Pb37)	BOTTOM	S-PBGA-B64	3	1.5 mm	8 mm	Not Qualified			16		NO	e0	30	235	8 mm		6 ns
DS92LV3222TVS/NOPB	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	64	TFQFP	SQUARE	PLASTIC/EPOXY	YES		2				10 ns		185 mA		3.3 V	3.465 V	3.3	FLATPACK, THIN PROFILE, FINE PITCH	TQFP64,.47SQ	3.135 V	Line Driver or Receivers			.5 mm	85 Cel	3.3 V	3-STATE	-40 Cel	2	MATTE TIN	QUAD	S-PQFP-G64	3	1.2 mm	10 mm	Not Qualified		TRUE	2		NO	e3	30	260	10 mm		0 ns
DS92LV3242TVS	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	64	TFQFP	SQUARE	UNSPECIFIED	YES	3.465 V	4					GENERAL PURPOSE		DIFFERENTIAL	3.3 V			FLATPACK, THIN PROFILE, FINE PITCH					3.135 V	.5 mm	85 Cel			-40 Cel		TIN LEAD	QUAD	S-XQFP-G64		1.2 mm	10 mm	Not Qualified			4	IT ALSO NEED 1.8V I/O SUPPLY		e0			10 mm
TSB14C01APM	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	64	LFQFP	SQUARE	PLASTIC/EPOXY	YES	5.25 V	2		CMOS			IEEE 1394		STANDARD	5 V		5	FLATPACK, LOW PROFILE, FINE PITCH	QFP64,.47SQ,20		Line Driver or Receivers		4.5 V	.5 mm	70 Cel			0 Cel	2	NICKEL PALLADIUM GOLD	QUAD	S-PQFP-G64	3	1.6 mm	10 mm	Not Qualified	24 Amp		2		NO	e4	30	260	10 mm		0 ns
TSB21LV03CIPM	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	64	LFQFP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	3		CMOS			IEEE 1394	175 mA	DIFFERENTIAL SCHMITT TRIGGER	3 V		3/3.3	FLATPACK, LOW PROFILE, FINE PITCH	QFP64,.47SQ,20		Line Driver or Receivers		2.7 V	.5 mm	70 Cel			0 Cel	6		QUAD	S-PQFP-G64		1.6 mm	10 mm	Not Qualified	12 Amp		6		YES		NOT SPECIFIED	NOT SPECIFIED	10 mm	.17 V	0 ns

Line Drivers & Receivers

Line drivers and receivers are electronic components that are used to transmit and receive data signals over long distances. They are commonly used in industrial and commercial applications that require reliable and high-speed data transmission.

Line drivers are electronic components that amplify signals and provide the necessary voltage and current to drive the transmission line. They are used to ensure that the data signal maintains its integrity and strength as it travels through the transmission line.

Line receivers are electronic components that are used to receive the data signal and convert it back to a usable form. They typically include a differential amplifier and a threshold detector to ensure that the received signal is of sufficient quality and strength to be used by the receiving device.

Line drivers and receivers can be classified into several types based on their specific applications and characteristics. Some of the most common types of line drivers and receivers include RS-232, RS-422, and RS-485.