8 Line Drivers & Receivers 2,400+

Reset All

Part	Manufacturer	Interface IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	Maximum Supply Voltage	No. of Functions	No. of Channels	Technology	Maximum Transmit Delay	Interface Standard	Maximum Supply Current	Input Characteristics	Nominal Supply Voltage	Maximum Supply Voltage-1	Power Supplies (V)	Nominal Negative Supply Voltage	Package Style (Meter)	Package Equivalence Code	Minimum Supply Voltage-1	Sub-Category	Maximum High Level Input Current	Minimum Supply Voltage	Terminal Pitch	Maximum Operating Temperature	Nominal Supply Voltage-1	Output Characteristics	Minimum Operating Temperature	Driver No. of Bits	Terminal Finish	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Seated Height	Width	Qualification	Maximum Output Low Current	Output Polarity	Receiver No. of Bits	Additional Features	Differential Output	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Minimum Out Swing	Maximum Receive Delay
NTS0102GT,115	NXP Semiconductors	LINE TRANSCEIVER	AUTOMOTIVE	NO LEAD	8	VSON	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1			8.8 ns	GENERAL PURPOSE		STANDARD	1.8 V	5.5 V	1.8/3.3,2.5/5		SMALL OUTLINE, VERY THIN PROFILE		2.3 V	Other Interface ICs		1.65 V	.5 mm	125 Cel	2.5 V		-40 Cel	2	TIN	DUAL	R-PDSO-N8	1	.5 mm	1 mm	Not Qualified			2		NO	e3	30	260	1.95 mm		8.8 ns
SN65HVD06P	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	THROUGH-HOLE	8	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.5 V	1		BICMOS	40 ns	EIA-485-A; TIA-485-A; ISO 8482E	15 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V	5.5 V	5		IN-LINE	DIP8,.3	4.5 V	Line Driver or Receivers	.0001 Amp	4.5 V	2.54 mm	85 Cel	5 V	3-STATE	-40 Cel	1	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDIP-T8		5.08 mm	7.62 mm	Not Qualified	.1 Amp	COMPLEMENTARY	1	SIGNALING RATE UPTO 10 MBPS	YES	e4	NOT SPECIFIED	NOT SPECIFIED	9.81 mm	2.5 V	70 ns
SN65HVD11SHKQ	Texas Instruments	LINE TRANSCEIVER	MILITARY	GULL WING	8	SOP	RECTANGULAR	CERAMIC, METAL-SEALED COFIRED	YES	3.6 V	1			40 ns	EIA-485-A; TIA-485-A; ISO 8482	18 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.6 V	3.3		SMALL OUTLINE	SOP8,.45	3 V	Line Driver or Receivers	.000003 Amp	3 V	1.27 mm	210 Cel			-55 Cel	1	GOLD	DUAL	R-CDSO-G8		2.8 mm	5.65 mm	Not Qualified	8 Amp		1		YES	e4			6.9 mm	1 V	70 ns
SN65LVDS9638DGK	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	2		CMOS	2.5 ns	EIA-644; TIA-644	35 mA	STANDARD	3.3 V	3.6 V	3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	3 V	Line Driver or Receivers	.00002 Amp	3 V	.65 mm	85 Cel	3.3 V	3-STATE	-40 Cel	2	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	S-PDSO-G8	1	1.1 mm	3 mm	Not Qualified		COMPLEMENTARY			YES	e4	NOT SPECIFIED	260	3 mm	.247 V	0 ns
SN75179BDE4	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	1		BIPOLAR	22 ns	EIA-422-B; TIA-422-B; EIA-485-A; TIA-485-A; V.11	70 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V	5.25 V	5		SMALL OUTLINE	SOP8,.25	4.75 V	Line Driver or Receivers	.00002 Amp	4.75 V	1.27 mm	70 Cel	5 V	TOTEM-POLE	0 Cel	1	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified	8 Amp	COMPLEMENTARY	1		YES	e4	30	260	4.9 mm	1.5 V	40 ns
SN75ALS176BDRE4	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	1		BIPOLAR	10 ns	EIA-422-B; TIA-422-B; EIA-485-A; TIA-485-A; V.11; X.27		DIFFERENTIAL SCHMITT TRIGGER	5 V		5		SMALL OUTLINE	SOP8,.25		Line Driver or Receivers	.00002 Amp	4.75 V	1.27 mm	70 Cel		3-STATE	0 Cel	1	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified	8 Amp	COMPLEMENTARY	1	3-STATE DRIVER OUTPUT AND RECEIVER INPUT	YES	e4	30	260	4.9 mm	1.5 V	16.5 ns
SN75ALS176BDRG4	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	1		BIPOLAR	10 ns	EIA-422-B; TIA-422-B; EIA-485-A; TIA-485-A; V.11; X.27	30 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V	5.25 V	5		SMALL OUTLINE	SOP8,.25	4.75 V	Line Driver or Receivers	.00002 Amp	4.75 V	1.27 mm	70 Cel	5 V	3-STATE	0 Cel	1	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified	8 Amp	COMPLEMENTARY	1	3-STATE DRIVER OUTPUT AND RECEIVER INPUT	YES	e4	30	260	4.9 mm	1.5 V	16.5 ns
ADN4694EBRZ	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES				DMOS			24 mA		3.3 V		3.3		SMALL OUTLINE	SOP8,.25		Line Driver or Receivers	.00001 Amp		1.27 mm	85 Cel			-40 Cel	1	MATTE TIN	DUAL	R-PDSO-G8	1			Not Qualified	8 Amp				YES	e3	30	260		.48 V	0 ns
DS90LV001TLD	Texas Instruments	LINE RECEIVER	INDUSTRIAL	NO LEAD	8	VSON	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1		CMOS		EIA-644-A; TIA-644-A	70 mA	DIFFERENTIAL	3.3 V	3.6 V	3.3		SMALL OUTLINE, VERY THIN PROFILE	SOLCC8,.11,20	3 V	Line Driver or Receivers	.00002 Amp	3 V	.5 mm	85 Cel	3.3 V	3-STATE	-40 Cel	1	TIN LEAD	DUAL	S-PDSO-N8	1	.8 mm	3 mm	Not Qualified	.01 Amp	TRUE	1		YES	e0	20	235	3 mm	.25 V	2 ns
HI-8570CRI	Holt Integrated Circuits	LINE DRIVER	INDUSTRIAL	THROUGH-HOLE	8	DIP	RECTANGULAR	CERAMIC, METAL-SEALED COFIRED	NO	5.3 V	2		CMOS		ARINC 429		STANDARD	5 V		+-5	-5 V	IN-LINE	DIP8,.3		Line Driver or Receivers	.0000001 Amp	4.8 V	2.54 mm	85 Cel			-40 Cel	1	TIN LEAD	DUAL	R-CDIP-T8		5.08 mm	6.29 mm	Not Qualified					YES	e0			9.652 mm	9 V	0 ns
HI-8570CRT	Holt Integrated Circuits	LINE DRIVER	MILITARY	THROUGH-HOLE	8	DIP	RECTANGULAR	CERAMIC, METAL-SEALED COFIRED	NO	5.3 V	2		CMOS		ARINC 429		STANDARD	5 V		+-5	-5 V	IN-LINE	DIP8,.3		Line Driver or Receivers	.0000001 Amp	4.8 V	2.54 mm	125 Cel			-55 Cel	1	TIN LEAD	DUAL	R-CDIP-T8		5.08 mm	6.29 mm	Not Qualified					YES	e0			9.652 mm	9 V	0 ns
HI-8570PDI	Holt Integrated Circuits	LINE DRIVER	INDUSTRIAL	THROUGH-HOLE	8	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.3 V	2		CMOS		ARINC 429		STANDARD	5 V		+-5	-5 V	IN-LINE	DIP8,.3		Line Driver or Receivers	.0000001 Amp	4.8 V	2.54 mm	85 Cel			-40 Cel	1	TIN LEAD	DUAL	R-PDIP-T8	1	4.699 mm	6.35 mm	Not Qualified					YES	e0			4.699 mm	9 V	0 ns
MAX3088CSAT	Maxim Integrated	LINE TRANSCEIVER	COMMERCIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	1		CMOS	60 ns	EIA-422; EIA-485	1 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		SMALL OUTLINE	SOP8,.25		Line Driver or Receivers	.000125 Amp	4.75 V	1.27 mm	70 Cel			0 Cel	1	TIN LEAD	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified	4 Amp	COMPLEMENTARY	1		YES	e0			4.9 mm	2 V	150 ns
MAX3088CSA+T	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	1		CMOS	60 ns	EIA-422; EIA-485	1 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		SMALL OUTLINE	SOP8,.25		Line Driver or Receivers	.000125 Amp	4.75 V	1.27 mm	70 Cel			0 Cel	1	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified	4 Amp	COMPLEMENTARY	1		YES	e3	30	260	4.9 mm	2 V	150 ns
MAX3483AEASA+	Analog Devices	LINE TRANSCEIVER		GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1		BICMOS	1000 ns	EIA-422; TIA-422; EIA-485; TIA-485	4 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V				SMALL OUTLINE	SOP8,.25			.000002 Amp	3 V	1.27 mm	125 Cel			-40 Cel	1	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm		2 Amp		1		YES	e3	30	260	4.9 mm	1.5 V	200 ns
MAX490CSA	Maxim Integrated	LINE TRANSCEIVER	COMMERCIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	1		CMOS	60 ns	EIA-422; EIA-485	.5 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		SMALL OUTLINE	SOP8,.25		Line Driver or Receivers	.000002 Amp	4.75 V	1.27 mm	70 Cel		TOTEM-POLE	0 Cel	1	TIN LEAD	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified	4 Amp	COMPLEMENTARY	1	1 RECEIVER ACTIVE UNDER SHUTDOWN; TRISTATABLE RECEIVER	YES	e0		245	4.9 mm	1.5 V	150 ns
MAX490CSA+	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	1		CMOS	60 ns	EIA-422; EIA-485	.5 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		SMALL OUTLINE	SOP8,.25		Line Driver or Receivers	.000002 Amp	4.75 V	1.27 mm	70 Cel		TOTEM-POLE	0 Cel	1	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified	4 Amp	COMPLEMENTARY	1		YES	e3	30	260	4.9 mm	1.5 V	150 ns
SN65HVD3085EDRG4	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1		CMOS	500 ns	EIA-485-A; TIA-485-A	.9 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		SMALL OUTLINE	SOP8,.25		Line Driver or Receivers	.0001 Amp	4.5 V	1.27 mm	85 Cel			-40 Cel	1	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified	8 Amp		1		YES	e4	30	260	4.9 mm	1.5 V	200 ns
SN65MLVD204ADG4	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1		BICMOS	3.5 ns	EIA-899; TIA-899	24 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.6 V	3.3		SMALL OUTLINE	SOP8,.25	3 V	Line Driver or Receivers	.00001 Amp	3 V	1.27 mm	85 Cel	3.3 V	DIFFERENTIAL	-40 Cel	1	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G8	1	1.75 mm	3.899 mm	Not Qualified	.01 Amp	COMPLEMENTARY	1		YES	e4	NOT SPECIFIED	260	4.9 mm	.48 V	6 ns
SN75HVD1176D	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	1		BICMOS	10 ns	EIA-485-A; TIA-485-A	6 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V	5.25 V	5		SMALL OUTLINE	SOP8,.25	4.75 V	Line Driver or Receivers	.0001 Amp	4.75 V	1.27 mm	70 Cel	5 V	DIFFERENTIAL	0 Cel	1	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified	8 Amp	COMPLEMENTARY	1		YES	e4	NOT SPECIFIED	260	4.9 mm	2.1 V	25 ns
ADN4696EBRZ	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1		DMOS	2.4 ns	EIA-899; TIA-899; EIA-644; TIA-644	24 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V		3.3		SMALL OUTLINE	SOP8,.25		Line Driver or Receivers	.00001 Amp	3 V	1.27 mm	85 Cel			-40 Cel	1	MATTE TIN	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified	8 Amp		1		YES	e3			4.9 mm	.48 V	6 ns
DS90LV028AHMX/NOPB	Texas Instruments	LINE RECEIVER	AUTOMOTIVE	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	2		CMOS		EIA-644; TIA-644	9 mA	DIFFERENTIAL	3.3 V	3.6 V	3.3		SMALL OUTLINE	SOP8,.25	3 V	Line Driver or Receivers	.00002 Amp	3 V	1.27 mm	125 Cel	3.3 V		-40 Cel		MATTE TIN	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified	2 Amp	TRUE	2			e3	30	260	4.9 mm		2.5 ns
HI-8450PSTF	Holt Integrated Circuits	LINE RECEIVER	MILITARY	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1				ARINC 429	18 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V				SMALL OUTLINE	SOP8,.25				3 V	1.27 mm	125 Cel			-55 Cel		MATTE TIN	DUAL	R-PDSO-G8	1	1.5 mm	3.9 mm				1	SEATED HEIGHT IS MINIMUM	NO	e3			4.9 mm		300 ns
LTC2863MPS8-1#PBF	Analog Devices	LINE TRANSCEIVER	MILITARY	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1		CMOS	50 ns	EIA-485; EIA-422		DIFFERENTIAL SCHMITT TRIGGER	3.3 V				SMALL OUTLINE					3 V	1.27 mm	125 Cel			-55 Cel	1	MATTE TIN	DUAL	R-PDSO-G8	1	1.752 mm	3.899 mm				1		YES	e3	30	260	4.9025 mm		65 ns
SN65HVD11SHKJ	Texas Instruments	LINE TRANSCEIVER	MILITARY	FLAT	8	DFP	RECTANGULAR	CERAMIC, METAL-SEALED COFIRED	YES	3.6 V	1		BIPOLAR	40 ns	EIA-485-A; TIA-485-A; ISO 8482	18 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.6 V	3.3		FLATPACK	FL8,.25	3 V	Line Driver or Receivers	.000003 Amp	3 V	1.27 mm	210 Cel		3-STATE	-55 Cel	1		DUAL	R-CDFP-F8		2.21 mm	5.75 mm	Not Qualified	8 Amp	TRUE	1		YES		NOT SPECIFIED	NOT SPECIFIED	7.035 mm	1 V	70 ns
SN65LVDS179DRG4	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1		BIPOLAR	2.7 ns	EIA-644; TIA-644	12 mA	DIFFERENTIAL	3.3 V	3.6 V	3.3		SMALL OUTLINE	SOP14,.25	3 V	Line Driver or Receivers	.00002 Amp	3 V	1.27 mm	85 Cel	3.3 V	DIFFERENTIAL	-40 Cel	1	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified	.02 Amp	TRUE	1		YES	e4	NOT SPECIFIED	260	4.9 mm	.247 V	4.5 ns
SN75LBC184PE4	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	THROUGH-HOLE	8	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.25 V	1		BICMOS	1300 ns	EIA-485; TIA-485; ISO 8482	30 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		IN-LINE	DIP8,.3		Line Driver or Receivers	.0001 Amp	4.75 V	2.54 mm	70 Cel			0 Cel	1	NICKEL PALLADIUM GOLD	DUAL	R-PDIP-T8		5.08 mm	7.62 mm	Not Qualified	4 Amp		1		YES	e4			9.81 mm	1.5 V	150 ns
THVD1550DGK	Texas Instruments	LINE TRANSCEIVER	AUTOMOTIVE	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	5.5 V	1			16 ns	EIA-485-A; TIA-485-A	1 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V	5.5 V			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		4.5 V			4.5 V	.65 mm	125 Cel	5 V		-40 Cel	1	Nickel/Palladium/Gold/Silver (Ni/Pd/Au/Ag)	DUAL	S-PDSO-G8	1	1.1 mm	3 mm				1		YES	e4	NOT SPECIFIED	NOT SPECIFIED	3 mm		45 ns
DRV134PAG4	Texas Instruments	LINE DRIVER	INDUSTRIAL	THROUGH-HOLE	8	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	36 V	1	1			GENERAL PURPOSE		STANDARD	18 V	18 V	+-18	-18 V	IN-LINE	DIP8,.3	4.5 V	Line Driver or Receivers	.001 Amp	9 V	2.54 mm	125 Cel	18 V		-55 Cel	1	NICKEL PALLADIUM GOLD	DUAL	R-PDIP-T8		5.08 mm	7.62 mm	Not Qualified	1 Amp	COMPLEMENTARY			YES	e4			9.81 mm	20 V	0 ns
DS91C176TMA/NOPB	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1		CMOS	5 ns	EIA-899; TIA-899	29.5 mA	DIFFERENTIAL	3.3 V	3.6 V	3.3		SMALL OUTLINE	SOP8,.25	3 V	Line Driver or Receivers	.000015 Amp	3 V	1.27 mm	85 Cel	3.3 V	3-STATE	-40 Cel	1	MATTE TIN	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified	8 Amp	COMPLEMENTARY	1		YES	e3	30	260	4.9 mm	.48 V	7.5 ns
HI-8588PST	Holt Integrated Circuits	LINE RECEIVER	MILITARY	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	1		CMOS		ARINC 429	6.3 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		SMALL OUTLINE	SOP8,.25		Line Driver or Receivers		4.75 V	1.27 mm	125 Cel			-55 Cel		Tin/Lead (Sn/Pb)	DUAL	R-PDSO-G8	1	1.773 mm	3.9 mm	Not Qualified	5.6 Amp		1			e0	30	240	4.915 mm		0 ns
HI-8588PSTF	Holt Integrated Circuits	LINE RECEIVER	MILITARY	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	1		CMOS		ARINC 429		DIFFERENTIAL SCHMITT TRIGGER	5 V				SMALL OUTLINE					4.75 V	1.27 mm	125 Cel			-55 Cel		Matte Tin (Sn)	DUAL	R-PDSO-G8	1	1.773 mm	3.9 mm	Not Qualified			1			e3	40	260	4.915 mm		0 ns
HI-8591PST-40	Holt Integrated Circuits	LINE RECEIVER	MILITARY	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.63 V	1		CMOS		ARINC 429	5 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V		3.3/5		SMALL OUTLINE	SOP8,.25		Line Driver or Receivers		2.97 V	1.27 mm	125 Cel			-55 Cel		Tin/Lead (Sn/Pb)	DUAL	R-PDSO-G8	1	1.773 mm	3.9 mm	Not Qualified			1	ALSO OPERATES AT 5V SUPPLY		e0	30	240	4.915 mm		1000 ns
ISL32603EFUZ	Renesas Electronics	LINE TRANSCEIVER	AUTOMOTIVE	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	3.3 V	1		BICMOS	2600 ns	EIA-485; EIA-422	.35 mA	DIFFERENTIAL SCHMITT TRIGGER	1.8 V				SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19			.000001 Amp	1.8 V	.65 mm	125 Cel		DIFFERENTIAL	-40 Cel	1	MATTE TIN	DUAL	S-PDSO-G8	2	1.1 mm	3 mm		2.2 Amp	COMPLEMENTARY	1		YES	e3	30	260	3 mm	1 V	1000 ns
ISL83088EIBZ-T	Renesas Electronics	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1		BICMOS	60 ns	EIA-485; EIA-422		DIFFERENTIAL SCHMITT TRIGGER	5 V				SMALL OUTLINE					4.5 V	1.27 mm	85 Cel			-40 Cel	1	MATTE TIN	DUAL	R-PDSO-G8	3	1.75 mm	3.9 mm				1		YES	e3	30	260	4.9 mm		125 ns
MAX3088EESA-T	Maxim Integrated	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	1			60 ns	EIA-422; EIA-485	1 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		SMALL OUTLINE	SOP8,.25		Line Driver or Receivers		4.75 V	1.27 mm	85 Cel			-40 Cel	1	TIN LEAD	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified	4 Amp		1		YES	e0	20	240	4.9 mm	2 V	150 ns
MAX3088EESA+T	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	1			60 ns	EIA-422; EIA-485	1 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		SMALL OUTLINE	SOP8,.25		Line Driver or Receivers		4.75 V	1.27 mm	85 Cel			-40 Cel	1	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified	4 Amp		1		YES	e3	30	260	4.9 mm	2 V	150 ns
SN65HVD3082EPE4	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	THROUGH-HOLE	8	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.5 V	1		CMOS	1300 ns	EIA-485-A; TIA-485-A	.9 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V	5.5 V	5		IN-LINE	DIP8,.3	4.5 V	Line Driver or Receivers	.0001 Amp	4.5 V	2.54 mm	85 Cel	5 V	DIFFERENTIAL	-40 Cel	1	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDIP-T8		5.08 mm	7.62 mm	Not Qualified	8 Amp	TRUE	1		YES	e4	NOT SPECIFIED	NOT SPECIFIED	9.81 mm	1.5 V	200 ns
SN65HVD3085EDGKRG4	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	5.5 V	1		CMOS	500 ns	EIA-485-A; TIA-485-A	.9 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V	5.5 V	5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	4.5 V	Line Driver or Receivers	.0001 Amp	4.5 V	.65 mm	85 Cel	5 V	DIFFERENTIAL	-40 Cel	1	NICKEL PALLADIUM GOLD	DUAL	S-PDSO-G8	1	1.1 mm	3 mm	Not Qualified	8 Amp	COMPLEMENTARY	1		YES	e4	30	260	3 mm	1.5 V	200 ns
SN65HVD51DRG4	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1			46 ns	EIA-485-A; TIA-485-A	8 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		SMALL OUTLINE	SOP8,.25		Line Driver or Receivers		4.5 V	1.27 mm	85 Cel			-40 Cel	1	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified	8 Amp		1	SIGNALING RATE 5 MBPS	YES	e4	30	260	4.9 mm	1.7 V	60 ns
SN65LBC176AQD	Texas Instruments	LINE TRANSCEIVER	AUTOMOTIVE	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	1		BICMOS	12 ns	EIA-485-A; TIA-485-A; ISO 8482	15 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V	5.25 V	5		SMALL OUTLINE	SOP8,.25	4.75 V	Line Driver or Receivers	.0001 Amp	4.75 V	1.27 mm	125 Cel	5 V		-40 Cel	1	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified	.1 Amp		1		YES	e4	30	260	4.9 mm	.9 V	20 ns
SN65LVDM176DR	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1		CMOS	2.7 ns	GENERAL PURPOSE	5 mA	DIFFERENTIAL	3.3 V	3.6 V	3.3		SMALL OUTLINE	SOP8,.25	3 V	Line Driver or Receivers	.00002 Amp	3 V	1.27 mm	85 Cel	3.3 V	DIFFERENTIAL	-40 Cel	1	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified	8 Amp	COMPLEMENTARY	1		YES	e4	30	260	4.9 mm	.05 V	4.5 ns
SN65LVDM176DRG4	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1		CMOS	2.7 ns	GENERAL PURPOSE	5 mA	DIFFERENTIAL	3.3 V	3.6 V	3.3		SMALL OUTLINE	SOP8,.25	3 V	Line Driver or Receivers	.00002 Amp	3 V	1.27 mm	85 Cel	3.3 V	DIFFERENTIAL	-40 Cel	1	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified	8 Amp	COMPLEMENTARY	1		YES	e4	30	260	4.9 mm	.05 V	4.5 ns
SN65LVDT2DRG4	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1		TTL	3.1 ns	EIA-644-A; TIA-644-A	8 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V		3.3		SMALL OUTLINE	SOP8,.25		Line Driver or Receivers		2.4 V	1.27 mm	85 Cel			-40 Cel	1	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified	8 Amp		1		NO	e4	30	260	4.9 mm		3.6 ns
SN65MLVD200ADG4	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1			3.5 ns	EIA-899; TIA-899	24 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.6 V	3.3		SMALL OUTLINE	SOP8,.25	3 V	Line Driver or Receivers	.00001 Amp	3 V	1.27 mm	85 Cel	3.3 V	DIFFERENTIAL	-40 Cel	1	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G8	1	1.75 mm	3.899 mm	Not Qualified	.01 Amp	COMPLEMENTARY	1		YES	e4	NOT SPECIFIED	260	4.9 mm	.48 V	6 ns
SN75ALS176BDG4	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	1		BIPOLAR	10 ns	EIA-422-B; TIA-422-B; EIA-485-A; TIA-485-A; V.11; X.27	30 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V	5.25 V	5		SMALL OUTLINE	SOP8,.25	4.75 V	Line Driver or Receivers	.00002 Amp	4.75 V	1.27 mm	70 Cel	5 V	3-STATE	0 Cel	1	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified	8 Amp	COMPLEMENTARY	1	3-STATE DRIVER OUTPUT AND RECEIVER INPUT	YES	e4	30	260	4.9 mm	1.5 V	16.5 ns
SP3078EEN	Exar		INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES							1.5 mA		3.3 V		3.3		SMALL OUTLINE	SOP8,.25		Line Driver or Receivers			1.27 mm	85 Cel			-40 Cel	1		DUAL	R-PDSO-G8				Not Qualified	1 Amp				YES					1.5 V	75 ns
DS90C402M/NOPB	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	2		CMOS		EIA-644; TIA-644	11 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V	5.5 V	5		SMALL OUTLINE	SOP8,.25	4.5 V	Line Driver or Receivers	.00001 Amp	4.5 V	1.27 mm	85 Cel	5 V		-40 Cel		MATTE TIN	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified	2 Amp		2		NO	e3	30	260	4.9 mm		6 ns

Line Drivers & Receivers

Line drivers and receivers are electronic components that are used to transmit and receive data signals over long distances. They are commonly used in industrial and commercial applications that require reliable and high-speed data transmission.

Line drivers are electronic components that amplify signals and provide the necessary voltage and current to drive the transmission line. They are used to ensure that the data signal maintains its integrity and strength as it travels through the transmission line.

Line receivers are electronic components that are used to receive the data signal and convert it back to a usable form. They typically include a differential amplifier and a threshold detector to ensure that the received signal is of sufficient quality and strength to be used by the receiving device.

Line drivers and receivers can be classified into several types based on their specific applications and characteristics. Some of the most common types of line drivers and receivers include RS-232, RS-422, and RS-485.