80 Line Drivers & Receivers 95

Reset All

Part	Manufacturer	Interface IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	Maximum Supply Voltage	No. of Functions	Technology	Maximum Transmit Delay	Interface Standard	Maximum Supply Current	Input Characteristics	Nominal Supply Voltage	Maximum Supply Voltage-1	Power Supplies (V)	Package Style (Meter)	Package Equivalence Code	Minimum Supply Voltage-1	Sub-Category	Maximum High Level Input Current	Minimum Supply Voltage	Terminal Pitch	Maximum Operating Temperature	Nominal Supply Voltage-1	Output Characteristics	Minimum Operating Temperature	Driver No. of Bits	Terminal Finish	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Seated Height	Width	Qualification	Maximum Output Low Current	Output Polarity	Receiver No. of Bits	Differential Output	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Minimum Out Swing	Maximum Receive Delay
SP505	Sipex			GULL WING	80	QFP	SQUARE	PLASTIC/EPOXY	YES			BICMOS					5 V		5	FLATPACK	QFP80,.7SQ		Line Driver or Receivers			.635 mm					7	TIN LEAD	QUAD	S-PQFP-G80	3			Not Qualified	3.2 Amp			YES	e0		225			500 ns
DS92LV16TVHGX/NOPB	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	80	LFQFP	SQUARE	PLASTIC/EPOXY	YES	3.45 V	1	CMOS		GENERAL PURPOSE	320 mA	DIFFERENTIAL	3.3 V	3.45 V	3.3	FLATPACK, LOW PROFILE, FINE PITCH	QFP80,.55SQ,20	3.15 V	Line Driver or Receivers		3.15 V	.5 mm	85 Cel	3.3 V		-40 Cel	1	MATTE TIN	QUAD	S-PQFP-G80	3	1.5 mm	12 mm	Not Qualified			1	YES	e3	30	260	12 mm		0 ns
DS92LV18TVVX/NOPB	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	80	LFQFP	SQUARE	PLASTIC/EPOXY	YES	3.45 V	1	CMOS			320 mA		3.3 V	3.45 V	3.3	FLATPACK, LOW PROFILE, FINE PITCH	QFP80,.55SQ,20	3.15 V	Line Driver or Receivers		3.15 V	.5 mm	85 Cel	3.3 V	3-STATE	-40 Cel	1	MATTE TIN	QUAD	S-PQFP-G80	3	1.6 mm	12 mm	Not Qualified		COMPLEMENTARY	1	YES	e3	30	260	12 mm	2.3 V	0 ns
DS92LV16TVHG	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	80	LFQFP	SQUARE	PLASTIC/EPOXY	YES	3.45 V	1	CMOS		GENERAL PURPOSE	320 mA	DIFFERENTIAL	3.3 V	3.45 V	3.3	FLATPACK, LOW PROFILE, FINE PITCH	QFP80,.55SQ,20	3.15 V	Line Driver or Receivers		3.15 V	.5 mm	85 Cel	3.3 V	3-STATE	-40 Cel	1	TIN LEAD	QUAD	S-PQFP-G80	3	1.5 mm	12 mm	Not Qualified		COMPLEMENTARY	1	YES	e0		260	12 mm		0 ns
DS92LV16TVHG/NOPB	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	80	LFQFP	SQUARE	PLASTIC/EPOXY	YES	3.45 V	1	CMOS		GENERAL PURPOSE	320 mA	DIFFERENTIAL	3.3 V	3.45 V	3.3	FLATPACK, LOW PROFILE, FINE PITCH	QFP80,.55SQ,20	3.15 V	Line Driver or Receivers		3.15 V	.5 mm	85 Cel	3.3 V		-40 Cel	1	MATTE TIN	QUAD	S-PQFP-G80	3	1.5 mm	12 mm	Not Qualified			1	YES	e3	30	260	12 mm		0 ns
DS92LV18TVV/NOPB	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	80	LFQFP	SQUARE	PLASTIC/EPOXY	YES	3.45 V	1	CMOS		GENERAL PURPOSE	320 mA	DIFFERENTIAL	3.3 V	3.45 V	3.3	FLATPACK, LOW PROFILE, FINE PITCH	QFP80,.55SQ,20	3.15 V	Line Driver or Receivers		3.15 V	.5 mm	85 Cel	3.3 V	3-STATE	-40 Cel	1	MATTE TIN	QUAD	S-PQFP-G80	3	1.6 mm	12 mm	Not Qualified		COMPLEMENTARY	1	YES	e3	30	260	12 mm	2.3 V	0 ns
DS92LV16TVHGX	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	80	LFQFP	SQUARE	PLASTIC/EPOXY	YES	3.45 V	1	CMOS		GENERAL PURPOSE	320 mA	DIFFERENTIAL	3.3 V		3.3	FLATPACK, LOW PROFILE, FINE PITCH	QFP80,.55SQ,20		Line Driver or Receivers		3.15 V	.5 mm	85 Cel			-40 Cel	1	TIN LEAD	QUAD	S-PQFP-G80	3	1.5 mm	12 mm	Not Qualified			1	YES	e0		260	12 mm		0 ns
SP514CF	Exar	LINE TRANSCEIVER	COMMERCIAL	GULL WING	80	LQFP	SQUARE	PLASTIC/EPOXY	YES	5.25 V	7	BICMOS	5000 ns	EIA-232-E; V.10; V.11; V.28; V.35; V.36; X.21; EIA-422-A; EIA-449; EIA-485; EIA-530; EIA-530-A		DIFFERENTIAL	5 V		5	FLATPACK	QFP80,.64SQ		Line Driver or Receivers		4.75 V	.65 mm	70 Cel			0 Cel	7		QUAD	S-PQFP-G80	1	1.6 mm	14 mm	Not Qualified	3.2 Amp		7	YES				14 mm	2 V	500 ns
THS7103IGQE	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	BALL	80	VFBGA	SQUARE	PLASTIC/EPOXY	YES	15.75 V	1			GENERAL PURPOSE		DIFFERENTIAL	15 V			GRID ARRAY, VERY THIN PROFILE, FINE PITCH					14.25 V	.5 mm	85 Cel			-40 Cel	1		BOTTOM	S-PBGA-B80		1 mm	5 mm	Not Qualified			1	YES				5 mm		0 ns
TSB41LV03PFP	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	80	HTFQFP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1	CMOS		IEEE 1394	330 mA	DIFFERENTIAL	3 V		3.3	FLATPACK, HEAT SINK/SLUG, THIN PROFILE, FINE PITCH	TQFP80,.55SQ		Line Driver or Receivers		2.7 V	.5 mm	70 Cel			0 Cel	6		QUAD	S-PQFP-G80		1.2 mm	12 mm	Not Qualified	12 Amp		6	YES		NOT SPECIFIED	NOT SPECIFIED	12 mm	.172 V	0 ns
ADS58C48IPFPR	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	80	HTFQFP	RECTANGULAR	PLASTIC/EPOXY	YES	1.9 V	4			GENERAL PURPOSE	330 mA	DIFFERENTIAL	1.8 V	1.9 V		FLATPACK		1.7 V		.00001 Amp	1.7 V	.5 mm	85 Cel	1.8 V		-40 Cel		NICKEL PALLADIUM GOLD	QUAD	R-PQFP-G80	3	1.2 mm	12 mm	Not Qualified			4	YES	e4	30	260	12 mm		7.5 ns
TSB41AB3PFPEP	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	80	HTFQFP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	6			IEEE 1394		DIFFERENTIAL SCHMITT TRIGGER	3.3 V			FLATPACK, HEAT SINK/SLUG, THIN PROFILE, FINE PITCH					3 V	.5 mm	70 Cel			0 Cel	6	NICKEL PALLADIUM GOLD	QUAD	S-PQFP-G80		1.2 mm	12 mm	Not Qualified			6	YES	e4			12 mm
TSB41BA3TPFPEP	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	80	TFQFP	SQUARE	PLASTIC/EPOXY	YES	1.95 V	6	CMOS		IEEE 1394		DIFFERENTIAL	1.85 V	3.6 V	1.8,3.3	FLATPACK, THIN PROFILE, FINE PITCH	TQFP80,.55SQ	3 V	Line Driver or Receivers		1.75 V	.5 mm	110 Cel	3.3 V		-40 Cel	6		QUAD	S-PQFP-G80		1.2 mm	12 mm	Not Qualified	4 Amp		6	YES				12 mm	.172 V	0 ns
TSB81BA3PFP	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	80	HTFQFP	SQUARE	PLASTIC/EPOXY	YES	2.05 V	6	CMOS		IEEE 1394		DIFFERENTIAL	1.95 V	3.6 V	3.3	FLATPACK, HEAT SINK/SLUG, THIN PROFILE, FINE PITCH	TQFP80,.55SQ	3 V	Line Driver or Receivers		1.85 V	.5 mm	70 Cel	3.3 V		0 Cel	6	Nickel/Palladium/Gold (Ni/Pd/Au)	QUAD	S-PQFP-G80	3	1.2 mm	12 mm	Not Qualified	4 Amp		6	YES	e4	NOT SPECIFIED	260	12 mm	.172 V	0 ns
THS7102CGQE	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	BALL	80	VFBGA	SQUARE	PLASTIC/EPOXY	YES	15.75 V	1			GENERAL PURPOSE		DIFFERENTIAL	15 V			GRID ARRAY, VERY THIN PROFILE, FINE PITCH					14.25 V	.5 mm	70 Cel			0 Cel	1		BOTTOM	S-PBGA-B80		1 mm	5 mm	Not Qualified			1	YES				5 mm		0 ns
TSB41AB3PFPG4	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	80	HTFQFP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	6	CMOS		IEEE 1394		DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.6 V	3.3	FLATPACK, HEAT SINK/SLUG, THIN PROFILE, FINE PITCH	TQFP80,.55SQ	3 V	Line Driver or Receivers		3 V	.5 mm	70 Cel	3.3 V	DIFFERENTIAL	0 Cel	6	NICKEL PALLADIUM GOLD	QUAD	S-PQFP-G80	3	1.2 mm	12 mm	Not Qualified	4 Amp	COMPLEMENTARY	6	YES	e4	30	260	12 mm	.172 V	0 ns
TSB81BA3EPFP	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	80	HTFQFP	SQUARE	PLASTIC/EPOXY	YES		3	CMOS			150 mA			3.6 V	1.8,3.3	FLATPACK, HEAT SINK/SLUG, THIN PROFILE, FINE PITCH	TQFP80,.55SQ	3 V	Line Driver or Receivers			.5 mm	70 Cel	3.3 V	DIFFERENTIAL	0 Cel	6	NICKEL PALLADIUM GOLD	QUAD	S-PQFP-G80	3	1.2 mm	12 mm	Not Qualified	4 Amp	COMPLEMENTARY	6	YES	e4	30	260	12 mm	.172 V	0 ns
TSB41BA3APFPG4	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	80	HTFQFP	SQUARE	PLASTIC/EPOXY	YES		6	CMOS		IEEE 1394		DIFFERENTIAL	3.3 V	3.6 V	1.8,3.3	FLATPACK, HEAT SINK/SLUG, THIN PROFILE, FINE PITCH	TQFP80,.55SQ	3 V	Line Driver or Receivers			.5 mm	70 Cel	3.3 V	DIFFERENTIAL	0 Cel	6	Nickel/Palladium/Gold (Ni/Pd/Au)	QUAD	S-PQFP-G80	3	1.2 mm	12 mm	Not Qualified	4 Amp	COMPLEMENTARY	6	YES	e4	NOT SPECIFIED	260	12 mm	.172 V	0 ns
TSB41BA3DPFP	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	NO LEAD	80	HQCCN	SQUARE	PLASTIC/EPOXY	YES	2 V	2			IEEE 1394B	150 mA	DIFFERENTIAL	1.85 V	3.6 V	1.8,3.3	CHIP CARRIER, HEAT SINK/SLUG	TQFP80,.55SQ	3 V	Line Driver or Receivers		1.7 V	.5 mm	70 Cel	3.3 V	DIFFERENTIAL	0 Cel	2	NICKEL PALLADIUM GOLD	QUAD	S-PQCC-N80	3	1.2 mm	12 mm	Not Qualified	4 Amp	COMPLEMENTARY	2	YES	e4	30	260	12 mm	.172 V	0 ns
TSB41BA3AIPFP	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	80	HTFQFP	SQUARE	PLASTIC/EPOXY	YES		6	CMOS		IEEE 1394		DIFFERENTIAL	3.3 V		1.8,3.3	FLATPACK, HEAT SINK/SLUG, THIN PROFILE, FINE PITCH	TQFP80,.55SQ		Line Driver or Receivers			.5 mm	85 Cel			-40 Cel	6	NICKEL PALLADIUM GOLD	QUAD	S-PQFP-G80	3	1.2 mm	12 mm	Not Qualified	4 Amp		6	YES	e4			12 mm	.172 V	0 ns
TSB41LV03AIPFP	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	80	HTFQFP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	6	CMOS		IEEE 1394		DIFFERENTIAL SCHMITT TRIGGER	3.3 V		3.3	FLATPACK, HEAT SINK/SLUG, THIN PROFILE, FINE PITCH	TQFP80,.55SQ		Line Driver or Receivers		3 V	.5 mm	85 Cel			-40 Cel	6		QUAD	S-PQFP-G80		1.2 mm	12 mm	Not Qualified	12 Amp		6	YES		NOT SPECIFIED	NOT SPECIFIED	12 mm	.172 V	0 ns
TSB41AB3	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	80	HTFQFP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1			IEEE 1394		DIFFERENTIAL SCHMITT TRIGGER	3 V			FLATPACK, HEAT SINK/SLUG, THIN PROFILE, FINE PITCH					2.7 V	.5 mm	70 Cel			0 Cel	6		QUAD	S-PQFP-G80		1.2 mm	12 mm	Not Qualified			6	YES				12 mm
TSB81BA3DIPFP	Texas Instruments		INDUSTRIAL	GULL WING	80	QFP	SQUARE	PLASTIC/EPOXY	YES			CMOS							1.8,3.3	FLATPACK	TQFP80,.55SQ		Line Driver or Receivers			.5 mm	85 Cel			-40 Cel	6		QUAD	S-PQFP-G80				Not Qualified	4 Amp			YES					.172 V
DS92LV18TVVX	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	80	LFQFP	SQUARE	PLASTIC/EPOXY	YES	3.45 V	1	CMOS		GENERAL PURPOSE	320 mA	DIFFERENTIAL	3.3 V		3.3	FLATPACK, LOW PROFILE, FINE PITCH	QFP80,.55SQ,20		Line Driver or Receivers		3.15 V	.5 mm	85 Cel			-40 Cel	1	TIN LEAD	QUAD	S-PQFP-G80	3	1.6 mm	12 mm	Not Qualified			1	YES	e0		260	12 mm		0 ns
TSB41LV03APFP	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	80	HTFQFP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	6	CMOS	11 ns	IEEE 1394		DIFFERENTIAL SCHMITT TRIGGER	3.3 V		3.3	FLATPACK, HEAT SINK/SLUG, THIN PROFILE, FINE PITCH	TQFP80,.55SQ		Line Driver or Receivers		3 V	.5 mm	70 Cel			0 Cel	6	NICKEL PALLADIUM GOLD	QUAD	S-PQFP-G80	3	1.2 mm	12 mm	Not Qualified	12 Amp		6	YES	e4	30	260	12 mm	.172 V	0 ns
THS7102IGQE	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	BALL	80	VFBGA	SQUARE	PLASTIC/EPOXY	YES	15.75 V	1			GENERAL PURPOSE		DIFFERENTIAL	15 V			GRID ARRAY, VERY THIN PROFILE, FINE PITCH					14.25 V	.5 mm	85 Cel			-40 Cel	1		BOTTOM	S-PBGA-B80		1 mm	5 mm	Not Qualified			1	YES				5 mm		0 ns
DS92LV18TVV	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	80	LFQFP	SQUARE	PLASTIC/EPOXY	YES	3.45 V	1	CMOS		GENERAL PURPOSE	320 mA	DIFFERENTIAL	3.3 V		3.3	FLATPACK, LOW PROFILE, FINE PITCH	QFP80,.55SQ,20		Line Driver or Receivers		3.15 V	.5 mm	85 Cel			-40 Cel	1	TIN LEAD	QUAD	S-PQFP-G80	3	1.6 mm	12 mm	Not Qualified			1	YES	e0		260	12 mm		0 ns
TSB41BA3APFP	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	80	HTFQFP	SQUARE	PLASTIC/EPOXY	YES		6	CMOS		IEEE 1394		DIFFERENTIAL	3.3 V	3.6 V	1.8,3.3	FLATPACK, HEAT SINK/SLUG, THIN PROFILE, FINE PITCH	TQFP80,.55SQ	3 V	Line Driver or Receivers			.5 mm	70 Cel	3.3 V	DIFFERENTIAL	0 Cel	6	NICKEL PALLADIUM GOLD	QUAD	S-PQFP-G80	3	1.2 mm	12 mm	Not Qualified	4 Amp	COMPLEMENTARY	6	YES	e4	30	260	12 mm	.172 V	0 ns
TSB81BA3IPFP	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	80	HTFQFP	SQUARE	PLASTIC/EPOXY	YES	2.05 V	6	CMOS		IEEE 1394		DIFFERENTIAL	1.95 V	3.6 V	1.8,3.3	FLATPACK, HEAT SINK/SLUG, THIN PROFILE, FINE PITCH	TQFP80,.55SQ	3 V	Line Driver or Receivers		1.85 V	.5 mm	85 Cel	3.3 V		-40 Cel	6		QUAD	S-PQFP-G80		1.2 mm	12 mm	Not Qualified	4 Amp		6	YES		NOT SPECIFIED	NOT SPECIFIED	12 mm	.172 V	0 ns
TSB41BA3PFP	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	80	HTFQFP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	6			IEEE 1394		DIFFERENTIAL	3.3 V		1.8,3.3	FLATPACK, HEAT SINK/SLUG, THIN PROFILE, FINE PITCH	TQFP80,.55SQ		Line Driver or Receivers		3 V	.5 mm	70 Cel			0 Cel	6		QUAD	S-PQFP-G80		1.2 mm	12 mm	Not Qualified	4 Amp		6	YES		NOT SPECIFIED	NOT SPECIFIED	12 mm	.172 V	0 ns
TSB41LV03APFPG4	Texas Instruments		COMMERCIAL	GULL WING	80	QFP	SQUARE	PLASTIC	YES			CMOS					3.3 V		3.3	FLATPACK	TQFP80,.55SQ		Line Driver or Receivers			.5 mm	70 Cel			0 Cel	6	NICKEL PALLADIUM GOLD	QUAD	S-PQFP-G80	3			Not Qualified	4 Amp			YES	e4	30	260		.172 V	12 ns
TSB81BA3DPFP	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	80	HTFQFP	SQUARE	PLASTIC/EPOXY	YES	2.05 V	6	CMOS		IEEE 1394		DIFFERENTIAL	1.95 V	3.6 V	1.8,3.3	FLATPACK, HEAT SINK/SLUG, THIN PROFILE, FINE PITCH	TQFP80,.55SQ	3 V	Line Driver or Receivers		1.85 V	.5 mm	70 Cel	3.3 V		0 Cel	6	Nickel/Palladium/Gold (Ni/Pd/Au)	QUAD	S-PQFP-G80	3	1.2 mm	12 mm	Not Qualified	4 Amp		6	YES	e4	NOT SPECIFIED	260	12 mm	.172 V	0 ns
TSB41LV04APFPG4	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	80	HTFQFP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	8	CMOS		IEEE 1394		DIFFERENTIAL SCHMITT TRIGGER	3.3 V		3.3	FLATPACK, HEAT SINK/SLUG, THIN PROFILE, FINE PITCH	TQFP80,.55SQ		Line Driver or Receivers		3 V	.5 mm	70 Cel			0 Cel	8	NICKEL PALLADIUM GOLD	QUAD	S-PQFP-G80	3	1.2 mm	12 mm	Not Qualified	4 Amp		8	YES	e4	30	260	12 mm	2.4 V	0 ns
TSB41BA3ATPFPEP	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	80	HTFQFP	SQUARE	PLASTIC/EPOXY	YES	2 V	6			IEEE 1394		DIFFERENTIAL	1.85 V	3.6 V	1.8,3.3	FLATPACK, HEAT SINK/SLUG, THIN PROFILE, FINE PITCH	TQFP80,.55SQ	3 V	Line Driver or Receivers		1.75 V	.5 mm	110 Cel	3.3 V	DIFFERENTIAL	-40 Cel	6	NICKEL PALLADIUM GOLD	QUAD	S-PQFP-G80	3	1.2 mm	12 mm	Not Qualified	4 Amp	COMPLEMENTARY	6	YES	e4	30	260	12 mm	.172 V	0 ns
TSB41BA3IPFP	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	80	HTFQFP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	6			IEEE 1394		DIFFERENTIAL	3.3 V		1.8,3.3	FLATPACK, HEAT SINK/SLUG, THIN PROFILE, FINE PITCH	TQFP80,.55SQ		Line Driver or Receivers		3 V	.5 mm	85 Cel			-40 Cel	6		QUAD	S-PQFP-G80		1.2 mm	12 mm	Not Qualified	4 Amp		6	YES		NOT SPECIFIED	NOT SPECIFIED	12 mm	.172 V	0 ns
TSB81BA3IPFPEP	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	80	HTFQFP	SQUARE	PLASTIC/EPOXY	YES	2.05 V	6	CMOS		IEEE 1394		DIFFERENTIAL	1.95 V	3.6 V	1.8,3.3	FLATPACK, HEAT SINK/SLUG, THIN PROFILE, FINE PITCH	TQFP80,.55SQ	3 V	Line Driver or Receivers		1.85 V	.5 mm	85 Cel	3.3 V		-40 Cel	6	NICKEL PALLADIUM GOLD	QUAD	S-PQFP-G80	3	1.2 mm	12 mm	Not Qualified	4 Amp		6	YES	e4	30	260	12 mm	.172 V	0 ns
TSB41AB3IPFP	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	80	HTFQFP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	6	CMOS		IEEE 1394		DIFFERENTIAL SCHMITT TRIGGER	3.3 V		3.3	FLATPACK, HEAT SINK/SLUG, THIN PROFILE, FINE PITCH	TQFP80,.55SQ		Line Driver or Receivers		3 V	.5 mm	85 Cel			-40 Cel	6	NICKEL PALLADIUM GOLD	QUAD	S-PQFP-G80	3	1.2 mm	12 mm	Not Qualified	4 Amp		6	YES	e4			12 mm	.172 V	0 ns
TSB81BA3DPFPG4	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	80	HTFQFP	SQUARE	PLASTIC/EPOXY	YES	2.05 V	6	CMOS		IEEE 1394		DIFFERENTIAL	1.95 V	3.6 V	1.8,3.3	FLATPACK, HEAT SINK/SLUG, THIN PROFILE, FINE PITCH	TQFP80,.55SQ	3 V	Line Driver or Receivers		1.85 V	.5 mm	70 Cel	3.3 V	DIFFERENTIAL	0 Cel	6	NICKEL PALLADIUM GOLD	QUAD	S-PQFP-G80	3	1.2 mm	12 mm	Not Qualified	4 Amp	COMPLEMENTARY	6	YES	e4	30	260	12 mm	.172 V	0 ns
TSB41AB3PFP	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	80	HTFQFP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	6	CMOS		IEEE 1394	1 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.6 V	3.3	FLATPACK, HEAT SINK/SLUG, THIN PROFILE, FINE PITCH	TQFP80,.55SQ	3 V	Line Driver or Receivers	.000001 Amp	3 V	.5 mm	70 Cel	3.3 V		0 Cel	6	NICKEL PALLADIUM GOLD	QUAD	S-PQFP-G80	3	1.2 mm	12 mm	Not Qualified	4 Amp		6	YES	e4	30	260	12 mm	.172 V	0 ns
TSB81BA3PFPG4	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	80	HTFQFP	SQUARE	PLASTIC/EPOXY	YES	2.05 V	6	CMOS		IEEE 1394		DIFFERENTIAL	1.95 V	3.6 V	3.3	FLATPACK, HEAT SINK/SLUG, THIN PROFILE, FINE PITCH	TQFP80,.55SQ	3 V	Line Driver or Receivers		1.85 V	.5 mm	70 Cel	3.3 V		0 Cel	6	Nickel/Palladium/Gold (Ni/Pd/Au)	QUAD	S-PQFP-G80	3	1.2 mm	12 mm	Not Qualified	4 Amp		6	YES	e4	NOT SPECIFIED	260	12 mm	.172 V	0 ns
TSB41AB3IPFPEP	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	80	HTFQFP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	6	CMOS		IEEE 1394		DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.6 V	3.3	FLATPACK, HEAT SINK/SLUG, THIN PROFILE, FINE PITCH	TQFP80,.55SQ	3 V	Line Driver or Receivers		3 V	.5 mm	85 Cel	3.3 V	DIFFERENTIAL	-40 Cel	6	NICKEL PALLADIUM GOLD	QUAD	S-PQFP-G80	3	1.2 mm	12 mm	Not Qualified	4 Amp	COMPLEMENTARY	6	YES	e4	30	260	12 mm	.172 V	0 ns
TSB41AB3IPFPG4	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	80	HTFQFP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	6	CMOS		IEEE 1394		DIFFERENTIAL	3.3 V		3.3	FLATPACK, HEAT SINK/SLUG, THIN PROFILE, FINE PITCH	TQFP80,.55SQ		Line Driver or Receivers		3 V	.5 mm	85 Cel			-40 Cel	6		QUAD	S-PQFP-G80		1.2 mm	12 mm	Not Qualified	4 Amp		6	YES		NOT SPECIFIED	NOT SPECIFIED	12 mm	.172 V	0 ns
TSB41AB3MPFPEP	Texas Instruments	LINE TRANSCEIVER	MILITARY	GULL WING	80	HTFQFP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	6			IEEE 1394		DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.6 V	3.3	FLATPACK, HEAT SINK/SLUG, THIN PROFILE, FINE PITCH	TQFP80,.55SQ	3 V	Line Driver or Receivers		3 V	.5 mm	125 Cel	3.3 V	DIFFERENTIAL	-55 Cel	6	NICKEL PALLADIUM GOLD	QUAD	S-PQFP-G80	3	1.2 mm	12 mm	Not Qualified	4 Amp	COMPLEMENTARY	6	YES	e4	30	260	12 mm	.172 V	0 ns
THS7103CGQE	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	BALL	80	VFBGA	SQUARE	PLASTIC/EPOXY	YES	15.75 V	1			GENERAL PURPOSE		DIFFERENTIAL	15 V			GRID ARRAY, VERY THIN PROFILE, FINE PITCH					14.25 V	.5 mm	70 Cel			0 Cel	1		BOTTOM	S-PBGA-B80		1 mm	5 mm	Not Qualified			1	YES				5 mm		0 ns
TSB41LV04APFP	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	80	HTFQFP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	8	CMOS		IEEE 1394		DIFFERENTIAL SCHMITT TRIGGER	3.3 V		3.3	FLATPACK, HEAT SINK/SLUG, THIN PROFILE, FINE PITCH	TQFP80,.55SQ		Line Driver or Receivers		3 V	.5 mm	70 Cel			0 Cel	8	NICKEL PALLADIUM GOLD	QUAD	S-PQFP-G80	3	1.2 mm	12 mm	Not Qualified	4 Amp		8	YES	e4	30	260	12 mm	2.4 V	0 ns
TSB81BA3EIPFP	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	80	HTFQFP	SQUARE	PLASTIC/EPOXY	YES		3	CMOS			150 mA			3.6 V	1.8,3.3	FLATPACK, HEAT SINK/SLUG, THIN PROFILE, FINE PITCH	TQFP80,.55SQ	3 V	Line Driver or Receivers			.5 mm	85 Cel	3.3 V	DIFFERENTIAL	-40 Cel	6	NICKEL PALLADIUM GOLD	QUAD	S-PQFP-G80	3	1.2 mm	12 mm	Not Qualified	4 Amp	COMPLEMENTARY	6	YES	e4	30	260	12 mm	.172 V	0 ns
TSB41BA3DIPFP	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	80	HQCCN	SQUARE	PLASTIC/EPOXY	YES	2 V	2			IEEE 1394B	150 mA	DIFFERENTIAL	1.85 V	3.6 V	1.8,3.3	CHIP CARRIER, HEAT SINK/SLUG	TQFP80,.55SQ	3 V	Line Driver or Receivers		1.75 V	.5 mm	85 Cel	3.3 V	DIFFERENTIAL	-40 Cel	2	NICKEL PALLADIUM GOLD	QUAD	S-PQCC-N80	3	1.2 mm	12 mm	Not Qualified	4 Amp	COMPLEMENTARY	2	YES	e4	30	260	12 mm	.172 V	0 ns
ADS58C48IPFP	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	80	HTFQFP	RECTANGULAR	PLASTIC/EPOXY	YES	1.9 V	4			GENERAL PURPOSE	330 mA	DIFFERENTIAL	1.8 V	1.9 V		FLATPACK		1.7 V		.00001 Amp	1.7 V	.5 mm	85 Cel	1.8 V		-40 Cel		NICKEL PALLADIUM GOLD	QUAD	R-PQFP-G80	3	1.2 mm	12 mm	Not Qualified			4	YES	e4	30	260	12 mm		7.5 ns

Line Drivers & Receivers

Line drivers and receivers are electronic components that are used to transmit and receive data signals over long distances. They are commonly used in industrial and commercial applications that require reliable and high-speed data transmission.

Line drivers are electronic components that amplify signals and provide the necessary voltage and current to drive the transmission line. They are used to ensure that the data signal maintains its integrity and strength as it travels through the transmission line.

Line receivers are electronic components that are used to receive the data signal and convert it back to a usable form. They typically include a differential amplifier and a threshold detector to ensure that the received signal is of sufficient quality and strength to be used by the receiving device.

Line drivers and receivers can be classified into several types based on their specific applications and characteristics. Some of the most common types of line drivers and receivers include RS-232, RS-422, and RS-485.